Tender For Special Repair To Building No P-14 (Qtr No 01 To 04) At Voc Under Ge (Central) Bangalore
Tender Value
57.97 Lakhs
Estimated cost
Bid Submission
10 Jul 2026
4 days left
EMD
1.12 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Building No P-14 (Qtr No 01 To 04) At Voc Under Ge (Central) Bangalore
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 27-Jun-2026 | BOQ Corrigendum | BOQ | 10-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on Brick / Concrete/ stone masonry surfaces incl raking out joints, hacking for key scrubbing down with water and Removing Rubbish of the MD Land complte all as specified and directed by Engineer-in-Charge. |
| 2 | M&L for rendering 15mm thick on brick/stone masonary surfaces or surface other than fair face of brickwork or on one side of lathing in CM 1:4 with 3% of WPC,Surfaces even & smooth without using extra cement on external surfaces of wall incl chajja and including necessary scaffolding complete all as specified and as directed. |
| 3 | M&L for rendering 15mm thick on brick masonary walls in CM (1:6) finished the surfaces even & smooth without using extra cement on internal surfaces complete all as specified and as directed. |
| 4 | M&L for Brushing neat cement slurry with 3.0kg of cement per sq. metre, including cleaning of rusted steel particles in reinforcement complete all as specified and directed. |
| 5 | M&L for rendering 10mm thick on fair face of brick work or concrete surfaces of ceiling in CM (1:3) finished the surfaces even & smooth without using extra cement including necessary scaffolding complete all as specified and directed. |
| 6 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. complete all as specified and directed. |
| 7 | Demolition of unreinforced cement concrete in floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 8 | Demolition of stone slabs of any description or thickness in floors laid bedded and pointed in any mortar etc. complete removal of debris outside MD land complete all as specified and as directed. |
| 9 | M&L for 75 mm thick cement concrete 1:3:6, type C-2 using 40 mm graded aggregate as in sub base or sub flooring complete all as specified and as directed. |
| 10 | M&L for 25 mm thick cement concrete 1:2:4, type B-0 using 12.5 mm graded aggregate as in sub base to floor or levelling course to receive floor finishes complete all as specified and directed. |
| 11 | M&L for light shade vitrifed ceramic tiles 7-8 mm thick, (square or rectangular) polished, area of each not exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing including 15 mm screed bed of CM 1:4 complete all as specified and directed. |
| 12 | M&L for light shade vitrifed ceramic tiles 7-8 mm thick, (square or rectangular) polished, area of each not exc 0.36 sqm, in skirtings/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing including rendering 10 mm in CM 1:4 as backing coat to receive skirting/dado complete all as specified and directed. |
| 13 | M&L for Non - skid coloured ceramic tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed. |
| 14 | M&L for Glazed coloured ceramic tiles in vertical surface 350x 250x 7 / 450x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including rendering 10 mm thick backing coat in CM 1:4 as backing coat to receive wall tiles etc complete all as specified and as directed. |
| 15 | M&L for 20mm thick Granite work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15 mm thick screed bed in CM 1:6 and Rounding to edges complete all as specified and as directed. |
| 16 | M&L for 18-20mm thick Sadherhali stone slab flooring, steps, jambs, pillars, window- cills, steps/stairs, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granit including 15 mm thick screed bed in CM 1:4 and Rounding to edges complete all as specified and directed. |
| 17 | M&L for 18-20mm thick Sadherhali stone slab for skirting, riser, dado and like jointing in cm (1:3) cluding pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granit including 10 mm thick rendering in CM 1:3 as backing coat complete all as specified and directed. |
| 18 | M&L for post construction anti termite treatment to the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and as directed. |
| 19 | Demolition of unreinforced cement concrete in floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 20 | M&L for 75 mm thick PCC 1:3:6 type C2 (using 40mm graded aggregate) as in Plinth protection finshed the concrete surface even and smooth without using extra cement complete all as specified and as directed. |
| 21 | Demolition of Brickwork or PCC solid block or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 22 | M&L for precast cement concrete block (Type C1, 1:3:6 using 20 mm graded aggregate) masonry with solid block, exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed. |
| 23 | M&L for precast cement concrete block (Type C1, 1:3:6 using 20 mm graded aggregate) masonry with solid block, 10 cm in width and setting in cement mortar 1:4 complete all as specified and directed. |
| 24 | Taking down Chowkhats or frames not exc. 1.5 sq. m each but with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 25 | All as per serial item No 24 above but exc 1.5 sqm and n exc 4.00 sqm complete all as specified and directed. |
| 26 | S&F Pressed steel frames for door 125x60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. |
| 27 | S&F Pressed steel frames for door 105x60 mm one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. |
| 28 | M&L for PCC 1:2:4 type B0 using 12.50mm graded aggregate as in filling of chowkats or steel frame and similar work complete all as specified and directed. |
| 29 | S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including lipping/frame to match complete all as specified and as directed. |
| 30 | S&F 30 mm thick Second class hard wood Glazed and skeleton shutters, for windows and doors open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etcsizes of members of shutters as specified in SSR in SSR Part I, section 8, clause 8.24(b); supply and fixed to chowkats complete all as specified and directed. |
| 31 | S&F Powder coated aluminium sliding window (three way) frame & shutter with glazed shutter and without wiremesh shutter /skeleton section with the following details :-(i) Aluminium frame section 116x36.50x1.80mm.(ii) Aluminium shutter glazed/skeleton section 50x20x1.50mm thick.(iii) Aluminium grill size 50mmx50mm and 4 to 5mm thick bars complete all as specified.(iv) Fixing arrangements legs in hold fast in walls incl PCC (1:3:6) making goog distributed surfaces complete in originally shape.(v) 4mm thick glass orinary quality and fixed with rubber gasket for with glazed shutter etc.(vi) Stainless steel wire mesh 0.36mm nominal dia avg aperature 1.14mm and fixed with rubber gasket for without glazed shutter etc.(vii) Aluminium disc /bow hanle and locking system complete |
| 32 | S&F Powder coated aluminium Ventilator (partially fixed glazing and Partially louvered glazing) with the following details :-(i) Aluminium frame section 45x25x1.80mm.(ii) Fixing arrangements legs in hold fast in walls incl PCC (1:3:6) making goog distributed surfaces complete in originally shape.(v) 4mm thick frosted glass orinary quality (partially fixed glazing and Partially louvered glazing) and fixed with rubber gasket for with glazed shutter etc. |
| 33 | S&F 50mm x 47 mm size PVC solid door frame of size made out of 5mm plain Colour PVC sheet reinforced with MS square tube , supplying and fixing in opening as per specification and drawing shown in SSR 2004 Part II. complete all as specified and directed. |
| 34 | S&F 30mm thick factory made solid panel PVC door shutter (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain Colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for stiles and plain Colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain Colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at site as per specification and drawing shown in SSR 2004 Part II. complete all as specified and directed. |
| 35 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 36 | S&F Plain, solid, straight 2nd class hard wood frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed. |
| 37 | S&F 19mm thick MDF Board both side finished as in wardrobe or kitchen cabinet and similar work any No of compartments & Drawers complete all as specified and as directed |
| 38 | S&F Continuous (piano) hinges, mild steel bright finish or electrogalvanised complete all as specified and directed. |
| 39 | M&L for Cutting holes in stone/brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1;2:4 type B1 exceeding half brick but not exceeding one brick complete all as specified and as directed. |
| 40 | S&F Mild steel work of any description as in band, strap, hold fast, cleat, hook, hinges, base tie for door frame, support or stay for rain water pipe, guard bars etc and other similar items conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed. |
| 41 | S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 42 | S & F Butt hinges,100 mm size medium weight, stainless steel complete all as specified and directed. |
| 43 | S&F 150 mm Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 44 | S&F 150mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 45 | S & F 75 mm size Butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed, type C-21 complete all as specified and directed. |
| 46 | S&F 100 mm Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 47 | S&F 100mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 48 | S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and directed. |
| 49 | S&F 100mm Hasp and staple, safety type, aluminium anodised with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 50 | S&F 15mm dia Magic Eye complete all as specified and directed. |
| 51 | S&F 300mm MS ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed. |
| 52 | S&F Floor door stopper 140mm of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and directed. |
| 53 | S&F in Repair 25mm dia aluminium anodised Powder coated Curtain Rod of approved quality complete all as specified and directed. |
| 54 | S&F in repair decorative type curtain rod brackets including stops/doms suitable for 25mm dia curtain rods complete all as specified and directed. |
| 55 | S&F Rotational moulded polyetylene water storage tank of capacity 1000 litres (cylindrical vertical with closed top)( triple layered) hoisted and fixed in position all as specified in SSR Part-I with tank adaptor, Gun-Metal, globe or gate valves of 25 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed and ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for pipe and fixed including dismantling existing all as speciifed and as directed. |
| 56 | Taking up or down steel water tubing and connections 15 mm bore complete all as specified and as directed. |
| 57 | Taking up or down steel water tubing and connections 20 mm bore complete all as specified and as directed. |
| 58 | S&F 20m outer dia CPVC Pipe (ISI Marked) SDR II & plain CPVC SDR II fittings fixed on wall, celing or floors complete all as specified and as directed. |
| 59 | S&F 25m outer dia CPVC Pipe (ISI Marked) SDR II & plain CPVC SDR II fittings fixed on wall, celing or floors complete all as specified and as directed. |
| 60 | S&F in repairs Stainless Steel ( conforming to AISI -304 grade) Kitchen Sink with drainage board of overall size 915mm x 460mm and bowl size 410mm x 355mm x 165mm depth made of 1mm thick stainless steel sheet with CP waste coupling including ball and chain 300mm long with brass cap rubber plug, 32mm bore PVC waste pipe (heavy duty ) 90 cm long, and bedded in cement morter and fixed on CP cantilever brackets, complete as directed. |
| 61 | S&F in repair Bib Tap Sink Cock with flange 15 mm bore all as specified and directed |
| 62 | S&F in repairs vitreous china wash hand basin, white, flat back of size 550x400 mm including a pair of cast iron cantilever brackets of size 40 x 40 x 5 mm with and including 32 mm dia PVC waste coupling of PTMT (half or full threaded), waste pipe low density polyethylene pipe 32mm bore complete all as specified and directed. |
| 63 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern) (EWC) white with 'P' or 'S' trap, plastic seat cover, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device including connection to outgoing pipe and to flushing pipe, anti-syphonage pipe etc (excluding flushing cistern and flush pipe) including making good to the floor complete all as specified and as direced. |
| 64 | S & F in repair white PVC flushing cistern 10 litres capacity, low level valveless, symphonic action type with inlet, ball valve, float and handle (including brackets, flush pipe of PVC 32 mm dia and handle) including cutting and pinning in ends, making good to disturbed surfaces in cement mortar 1:3 and fixed inclusing taking down/out unserviceable flushing cistern and connected items complete all as specified and directed. |
| 65 | S&F in repairs PVC Connection 15mm dia with PTMT nuts of length 450mm complete all as specified and as directed. |
| 66 | S&F 15mm bore pillar taps cast copper alloy, with capstan heads chromium plated, screwed down, fancy type high pressure, with or without lettered 'HOT or COLD' with long screwed sunk and fly niuts complete all as specified and directed |
| 67 | S&F in repairs 15mm Bib tap chromium plated fancy type cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for union complete all as specified and directed. |
| 68 | S&F in repairs 2 in 1 CP 15mm Bib tap Quarter turn fancy type with crutch or butterfly handle screwed down, screwed for iron pipe or for union complete all as specified and directed. |
| 69 | S&F in Repair 15mm Bore Stop Valves / Angle Cock Fancy Type Chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends complete all as specified and as directed. |
| 70 | S&F in repairs Shower rose with brass chromium plated shower rose with or without swivel joints, 125mm size including fixing to steel pipe or union complete all as specified and directed. |
| 71 | S&F in repairs Brass chromium plated tubular towel rail, 20mm dia ‘D’ type, 60CM long between flanges complete all as specified and as directed. |
| 72 | S&F in repairs CP health faucet along with 1 m long flexible tube and holding stand including all necessary fittings complete all as specified and as directed |
| 73 | S&F in repairs CP Soap dish 150mm, fixed to wall with chromium plated brass screws complete all as specified and as directed. |
| 74 | S & F in repairs 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 75 | M&L for Preparation of newly plastered surface of ceiling of any description over 10 cm girth or width, not otherwise described and applying three coat of white wash including necessary scaffolding complete all as specified and directed. |
| 76 | M&L for applying two coats of oil bound distemper over a coat of alkali resistant primer including on newly plastered surfaces of wall including a coat of Birla Wall care putty 1mm thick wall putty necessary prepartation complete all as specified and as directed. |
| 77 | M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm / litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint (weather proof paint) of required shade (company depot tinted) with silicon additives @ 1.43 litre / 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm over new plastered surfaces of wall including necessary scaffolding complete all as specified and as directed. |
| 78 | M&L for Complete removal of existing treatment,applying a coat of 1mm thick Birla wallcare putty for smooth finished of the surface and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm / litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint (weather proof paint) of required shade (company depot tinted) with silicon additives @ 1.43 litre / 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm over old plastered surfaces of wall including necessary scaffolding complete all as specified and as directed. |
| 79 | M&L for Complete removal of existing treatment and preparation of surface of wall, washing, rubbing down and stopping of distempered and painted surface, applying a coat of 1.5mm average thick cemnet base wallcare putty for smooth finished of the surface and applying two coats of oil bound distemper complete all as specified and directed. |
| 80 | M&L for Preparation of Old decorated surface and applying two coats of white wash on ceiling etc including necessary scaffolding complete all specified and as directed. |
| 81 | M&L for Preparation of new of previously untreated Wooden surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 82 | M&L in repairs PVC (SWR) floor trap 75mm dia plain with steel grating including jointing with solvent cement etc complete complete all as specified and as directed. |
| 83 | S&F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls etc complete all as specified and directed. |
| 84 | S&F in repair 75mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls etc complete all as specified and directed. |
| 85 | S&F PVC (SWR) bends 110mm dia any radius with access door complete all as specified and as directed. |
| 86 | S&F PVC (SWR) bends 75 mm dia any radius with access door complete all as specified and as directed. |
| 87 | S&F PVC (SWR) junction single, (Single T) 110mm dia equal or unequal with access door complete all as specified and as directed. |
| 88 | S&F PVC (SWR) junction single, (Single T) 75mm dia equal or unequal with access door complete all as specified and as directed. |
| 89 | S&F PVC (SWR) branch piece, (Single Y) 110mm dia equal or unequal with access door complete all as specified and as directed. |
| 90 | S&F PVC (SWR) branch piece, (Single Y) 75mm dia equal or unequal with access door complete all as specified and as directed. |
| 91 | S&F PVC (SWR) vent cowl 110mm bore complete all as specified and as directed. |
| 92 | S&F PVC (SWR) vent cowl 75mm bore complete all as specified and as directed. |
| 93 | S&F in repairs Chromium Plated Steel Grating of 100mm size With or Without Waste Hole complete all as specified and as directed. |
| 94 | Demolition of unreinforced cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed. |
| 95 | M&L for PCC 1:2:4 type B-0 using 12.5mm grades stone aggregate as in Padding over roof /chajja finished even and smooth without using extra cement complete all as specified and as directed. |
| 96 | M&L Rendering 10mm thick on brick work or concrete surface in CM 1:3 surface finished even and smooth surface without using extra cement including mixing WPC as per manufacturer's instructions complete all as specified and directed.Note :WPC will be measured and paid seperately. |
| 97 | M&L for Applying oil bound bitumen primer @ 1.50 Kg/Sqm and providing 3 mm thick APP modified water proofing membrane weighing 3.6 kg/sqm reinforced with non woven polyester matt weighing not less than 150 gm /sqm having softening point not less than 140 centigrade, having tensile strength of 650N/sqm and 350 N/sqm in longitudinal and transverse directions respectively of the reinforced tearing strength of 180N by torch application with minimum 10cm side overlap and 15cm end lap, applying a coat of blown grade hot bitumen 85/25 over the membrane @ 1.2 Kg /Sqm top of membrane surface shall then be finished with solar reflective bituminious aluminium paint @ 0.10 Kg/Sqm complete all as directed including taking down existing treatment all as specified and directed. |
| 98 | Supply only Integral waterproofing compound complete all as specified and directed. |
| 99 | S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed. |
| 100 | S&F magnetic catcher with 8mm dia steel ball and brass body and strike plate including letting in and fixed complete all as specified and directed. |
| 101 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 102 | S&F in repairs Stainless steel plate rack of size 900mm x 600mm x 250mm including fixed with rawl plug and screws on walls complete all as specified and directed. |
| 103 | S&F 15mm bore brass CP wall mixer for mixing hot and cold water screwed down with provision of over lead shower and cock for iron pipe and fixed complete all as specified and directed. |
| 104 | M&L for Cutting/chipping the sapling area not exc 1.00 sqm from stone / concrete surfaces of columns, beams, facias, slabs, Chajjas & cartilevers etc., and trimming cleaning the surfaces of any thickness all as specified and directed. M/L for applying epoxy treatment for bonding old demolished concrete surfaces incl application of one coat of notozinc primer to the exposed reinforcement and over plastering in CM 1:4 average 20mm thick finishied even and smooth without using extra cement to level the surface etc incl necessary scafolding as required at site and where required complete all as specified and directed. |
| 105 | M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed |
| 106 | S&F towel ring of PTMT round or quad fixed with and including chromium plated brass screws and wooden /plastic cleats (minimum weight 90 gms) complete all as specified and directed. |
| 107 | Treatment of sunken floor slab compriases of the following specifications and all as specified :-(i) Material and labour for cleaning of the sunken /lowered portion of the RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chiesel out any mortar sticking to the surface and brooming / washing completely. 40 mm avg thick PCC 1:2:4 type B-0 using 12.5 mm graded aggregate as in padding concrete to achieve proper slope including 50 mm dia 350 mm long medium grade GI pipe spouts with wire guage on inside mouth to be fixed.(ii) Rendering of uneven surfaces with 10 mm thick CM 1:4 mixed with integral water proofing compound of UltraTech WP+ 200 or other equivalent etc complete fill it with water and check dampness and seepage. where dampness and seepage noticed nozzles shall be fixed and grouting carried out. (iii) All junctions points of side walls where CI/GI pipes are passing through shall be sealed with epoxy putty(iv) After drying putty wash the slab and sides of sunken portion with water and make it clean and clear(v) Material and labour for applying two coat of polymer modified cementious water proofing coating as per manufactures instructions to bottom and vertical sides up to finished flooor level +100 mm height. The thickness of two layer shall be 1 mm. When the second layer is still sticky, coarse sand spry shall be carried out or vertical and bottom surface of the sunken portion all as specified and directed.(vi) Plaster the bottom and sides up to bottom of the skirting with minimum 20mm thick CM 1:4 mixed with integral water proofing compound @3% wt of cment consumed as per manufacturer's specification including rounding of corners and junctions sloping towards spout.(vii) All pipes laid in sunken portion shall be covered with 50 mm thick PCC 1:2:4 all around after painting with anticorrossive black japan paintNote : Test the water proofed area (ponding test) by filling water for at least 72 hours and tested for leakage seepage and to the entire satisfaction of GE. The treatment shall be carried out by authorised applicators of chemicals. Cost of testing is included in the rates quoted above. |
| 108 | M&L for Cement concrete Type E2 1:5:10 (40 mm graded aggregate) in foundation filling and mass concrete complete all as specified and directed. |
| 109 | Supply and laying of 40mm CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls/ceiling or laing in floors (spout) complete all as specified and as directed |
| 110 | M&L for Preparation of Old decorated surface and applying two coats of white wash on walls including necessary scaffolding etc complete all as specified and as directed. |
| 111 | M&L for Preparation of new /old decorated surface and applying two coats of white wash on walls etc including a coat of cement base wall care putty 1.5mm average thick including necessary scaffolding complete all as specified and as directed. |
| 112 | M&L for 18 mm thick PVC ply both sides plain as in kitchen shelves, cupboard / cabinet including, auto closing stainless steel hinges, SS handles, SS screws etc as per manufacturer's instructions including fixin to wall any type or frame complete all as specified and directed. |
| 113 | Demolition of reinforced Concrete of any description and any position like stair, handrail , chajjas, etc and in any position not otherwise specifically provided for and making good to disturbed surfaces complete all as spcified and directed |
| 114 | Removal of complete vegetation from roof/ wall/ chajja/ drainage pipe line and treated with chemical glycophosphate and filling the hole with PCC 1:2:4 complete all as specified and directed. |
| 115 | M&L for Drilling holes for inserting TMT bars, bolts, pipes etc not exceeding 25 mm dia in concrete wall / stone wall and applying bonding agent of NITOBOND chemical (FOSROC)/ Its equivalent as per manufacturers instructions to the receiving inserting rod for through bonding before concreting including necessary formwork complete all as specified and as directed. |
| 116 | M&L for Cutting chases, pinning in brick wall / stone masonry wall/ or any concrete walls/surfaces & making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring,etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed. |
| 117 | Removing building materials etc.(other than spoil payable under items 03028 to 03031 in Section-3—Earthwork) to a distance of 1.0 Km or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and as directed. |
| 118 | Form work to rough finished surface of sides and soffits of suspended slabs such as roof slabs, floor slabs, landings, chajjas and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 119 | Formwork (rough finished) to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed. |
| 120 | M&L for Reinforced cement concrete Type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in slabs supported on walls,chajjas, beams, landings, deck slab and like any description and any position complete all as specified and as directed. |
| 121 | M&L for heavy duty exterior grade vitrified tiles 400x400x10-12 mm thick, laid in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing including 15 mm screed bed of CM 1:4, complete all as specified and directed. |
| 122 | M&L for heavy duty exterior grade vitrified tiles 400x400x10-12 mm thick, laid in dado/skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing including 10 mm backing coat of CM 1:4, complete all as specified and directed. |
| 123 | S&F Framedwork such as grills,gratings,gate etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed |
| 124 | M&L for preparation of old painted wooden surfaces of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed |
| 125 | M&L for preperation of new or previously untreated steel surfaces of any description not otherwise described over 10 cm with or girth and applaying two coat of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed. |
| 126 | M&L for mildsteel deformed, TMT bars 10mm dia and over cut to length bend to shape require including cranking hooping ends binding in & wine annealed not less than 0.9 mm dia or securing with clips complete all as specified and as directed. |
| 127 | S&F Rotational moulded polyetylene water storage tank of capacity 500 litres (cylindrical vertical with closed top)(triple layered) hoisted and fixed in position all as specified in SSR Part-I with tank adaptor, Gun-Metal , globe or gate valves of 25 mm dia , with iron wheel head, screwed both ends for iron pipe and fixed and ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for pipe and fixed including dismantling existing tank complete all as speciifed and as directed. |
| 128 | Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators, sockets etc. to be measured separately), removing materials to store for keeping in safe custody for re-use at site and making good disturbed surfaces of walls, floors, etc to match with the existing surface complete all as specified and directed. |
| 129 | Taking down old un servceable DB's / Main switches any capacity complete all as specified and directed. |
| 130 | Taking down old un servceable MCB's, SP/SPN / TPN complete all as specified and directed. |
| 131 | M&L for Point wiring complete for one light/ ceilig fan/Exhaust fan /bell point controlled by one, one way switch with 1.5 sqmm single core PVC insulated FRLS unsheathed cable 1100 volts grade with multistranded copper conductor conforming to IS-694 1990 with ISI marked (for phase ,neutral and earth) drawn in and including non metalic rigid PVC conduit medium gradewith ISI mark of minimum 20mm dia and all conduit accessories Concealed including cutting / chases in wall /ceiling /fixed to roof /truss/columns etc and including factory made branded make embossed galavanised steel pressed terminal boxes alongwith size modular cover plates with frames fixing modular switches, sockets, regulators etc.of suitable size modules and earth wire to be connected to common earth dolly complete all as specified and directed Note : Location of light points, socket points and light fittings may be decided by Engr-in-charge as per site/user requirment. |
| 132 | All as per item No. 131.00 above but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on same board with other switches complete all as specified and directed |
| 133 | All as per item No. 131.00 above but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch socket on independent board complete all as specified and directed. |
| 134 | All as per item No. 131.00 above but for one light point controlled by two, two way switches single pole complete all as specified and directed. |
| 135 | All as per serial item No. 131.00 here-in-above but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade (ISI marked) including 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade (ISI marked) as continuous earth wire in green colour complete all as specified and directed |
| 136 | All as per serial item No. 131.00 here-in-above but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 4.0 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade (ISI marked) including 4.0 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade (ISI marked) as continuous earth wire in green colour complete all as specified and directed. |
| 137 | S&F modular type TV socket including conduit with TV Cable and all accessories complete all as specified and directed by Engr-in-charge. |
| 138 | S&F modular type Telephone socket including conduit with Telephone cable and all accessories complete all as specified and directed by Engr-in-charge. |
| 139 | S&F Modular switch 1 way 6 Amps, 1 module 240 Volts AC complete all as specified and directed. |
| 140 | S&F Modular switch 2 way 6 Amps,1 module 240 Volts AC complete all as specified and directed. |
| 141 | S&F modular switch 1 way 16A, 1 module 240 Volts AC complete all as specified and directed |
| 142 | S&F Modular type socket, 6A/16 Amps, 240 volts AC, 2 module, suitable for inserting 3 pin 6 Amps / 3 pin 16 Amps plug top complete all as specified and directed. |
| 143 | S&F Modular type socket, 6 Amps, 240 volts AC, 2 module, suitable for inserting 2 pin 6 Amps / 3 pin 6 Amps plug top complete all as specified and directed. |
| 144 | S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. |
| 145 | S&F 9 Watt, LED Bulb 230V, PF not less than 0.85 (min) complete all as specified and directed. |
| 146 | S&F Modular type 1-way Bell push switch, 1 module 6Amps 240 Volts AC complete all as specified and directed. |
| 147 | S&F electric calling Bell musical type AC 240 Volts, single pole complete all as specified and directed. |
| 148 | S&F Stepped type electronic modular fan regulator 2-module, modular type 120W, 2 Module 240 Volts AC complete all as specified and directed. |
| 149 | S&F ceiling rose, PVC/Polycarbonate insulated body, 65mmx50mm with three terminals 240 Volts AC, ISI marked, including supply and fix PVC square mounting block complete all as specified and directed. |
| 150 | S & F exhaust fan, single phase, heavy duty, 300 mm (12\\") sweep, metal body 1400 RPM with louver including fixing of mounting frame in the round/square hole core cutting in the wall, by means of rugged bolts, nuts and washers etc,including connecting with three core copper conductor flexible cord of 0.5 Sqmm cross sectional area of required length from ceiling rose to the porcelain connector block of the exhaust fan, complete all as specified and directed including taking down unservicable exhaust fan & depositing the same to MES E/M Store yard. |
| 151 | S & F exhaust fan, single phase, heavy duty, 200 mm (8\\") sweep, PVC body 1400 RPM with louver including fixing of mounting frame in the round/square hole core cutting in the wall or in Aluminium Vent frame, by means of rugged bolts, nuts and washers etc,including connecting with three core copper conductor flexible cord of 0.5 Sqmm cross sectional area of required length from ceiling rose to the porcelain connector block of the exhaust fan, complete all as specified and directed including taking down unservicable exhaust fan & depositing the same to MES E/M Store yard. |
| 152 | S&F in repairs LED tube light fitting, 1x10 watts, 6000k 230 volt, with extruded aluminium housing provided efficiant heat disspation with poly corbonate diffuser, all pre-wired fixed on walls with all fixing accessories such as 2 Nos of PVC square/round blocks, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed. |
| 153 | S&F in repairs LED tube light fitting, 1x20 watts,6000k 230 volt, with extruded aluminium housing provided efficient heat disspation with poly corbonate diffuser, all pre-wired fixed on walls with all fixing accessories such as 2 nos of PVC square/round blocks, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed. Please Enable Macros to View BoQ information |
| 154 | S&F in repairs LED tube light fitting, 1x20 watts,6000k 230 volt, with extruded aluminium housing provided efficient heat disspation with poly corbonate diffuser, all pre-wired fixed on walls with all fixing accessories such as 2 nos of PVC square/round blocks, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 27, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 10, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysJul 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender