|
| 1 | Excavation over area not exc 1.5 m deep in any type of soil and getting out complete all as specified. |
| 2 | Returning, filling in (soil) including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified. |
| 3 | Removal of excavated material (soil) to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified. |
| 4 | Cement concrete Type C 2 (1:3:6)(Nominal mix) using 40 mm graded crushed stone aggregates in foundation filling and mass concrete complete all as specified. |
| 5 | Supply only 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in weep holes etc complete all as specified. |
| 6 | Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified. |
| 7 | M&L for hand packing (any thickness) gravel / aggregate 200mm thick ( 5 to 10mm size), coarse sand 200mm thick ( 2 to 4 mm size), small boulders/ aggregate 300mm thick ( 30 to 40 mm size), for inverted filter of at back of walls over arches etc. and raising (or lowering) to therequired level complete all as specified and directed. |
| 8 | M&L for RCC M-25 as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; asement slabs, under-reamed piles and mass concrete complete all as specified. |
| 9 | M&L for RCC M-25 as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified. |
| 10 | S&F for wire netting of galvanised steel wire 1.40mm dia and size of mesh25mm fixed with tinned tacks of wire staples complete all as specified. |
| 11 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified. |
| 12 | Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified. |
| 13 | M&L for 200mm thick soling (or sub base) with broken boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber complete all as specified. |
| 14 | M&L for PCC type B-1, 1:2:4 (using 40 mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 15 | M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:4 complete all as specified. |
| 16 | M&L for raised pointing to random or polygonal rubble, uncoursed or brought upto courses in CM 1:4 complete all as specified and directed. |
| 17 | M&L for precast cement concrete type B-1, 1:2:4 (20 mm graded aggregate) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and set in CM 1:4 complete all as specified and directed. |
| 18 | Mild steel TMT bars, 5mm dia and over upto incl 10 mm dia stirrups, spacers etc, bending spirally or hooping for columns, hooking ends and binding with mild sleet wire not less than 0.90mm dia complete all as specified and directed. |
| 19 | Extra over stone walling for hammer dressing to face stones and dressing of beds & joints, as specified, of random rubble walling, uncoursed or brought upto courses with max depression on face from straight edge held against the dressed surface not exc 40 mm on granite or trap stone complete all as specified |
| 20 | Excavation in trenches n exc 1.50m wide and not exc 1.50m deep for foundation and getting out in soft / loose soil complete all as specified and as directed. |
| 21 | M & L for modular fly ash bricks as in brick work straight or curved on plan exceeding 6m mean radious built in CM 1:4 all as specified and directed. |
| 22 | M&L for PCC type B-1, 1:2:4 (using 40 mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 23 | M&L for PCC type C-2, 1:3:6 (using 40 mm graded crushed stone aggregate) as in surface channels and drains complete all as specified and directed. |
| 24 | M&L for rendering 15mm thick cement plaster on concrete surfaces or fair surface face of brick work in CM 1:4 surface finished even and smooth without using extra cement complete all as specified. |
| 25 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed. |
| 26 | Add or deduct for each 25mm girth or part thereof over or under 30cm inner girth complete all as specified and directed. |
| 27 | M&L for Reinforced concrete pipes 600mm bore, class NP3, laid and jointed complete with collars complete all as specified and directed. M&L for Reinforced concrete pipes 600mm bore, class NP3, laid and jointed complete with collars complete all as specified and directed. Please Enable Macros to View BoQ information |
