Tender For Special Repair To Building No 129 To 131 (Jcos Md Accn) And Bldg No 136 To 139 (Ors Md Accn) In Karam Vihar Under Ge (East), Delhi Cantt-10
Tender Value
14.46 Crore
Estimated cost
Bid Submission
17 Jul 2026
8 days left
EMD
10.48 Lakhs
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Building No 129 To 131 (Jcos Md Accn) And Bldg No 136 To 139 (Ors Md Accn) In Karam Vihar Under Ge (East), Delhi Cantt-10
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 03-Jul-2026 | Amendment No 1 | BOQ | 17-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 Sqm each complete all as specified and directed. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 but not exc. 4 Sqm each complete all as specified and directed. |
| 3 | Refixing the shutter of any description exc 1 sqm and n exc 2 sqm in same opening complete all as specified and directed. |
| 4 | S&F for Pressed steel frames for doors of size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. |
| 5 | S&F for Pressed steel frames for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. |
| 6 | S&F in repair Mild steel, 0.63 mm thick plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; or welded including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed. |
| 7 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. Notes: (i) Stainless steel butt hinges and necessary S.S screws shall be paid separately.(ii) Manufacturer's Test Certificate and Screw Out Test will be provided by Contractor to GE. |
| 8 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed.Notes: (i) M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately.(ii) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 9 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. Note: Stainless steel butt hinges and necessary S.S screws shall be paid separately. |
| 10 | S&F Butt Hinges medium weight cold rolled mild steel of size 100 mm complete all as specified and directed |
| 11 | S&F 150 mm size Mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed. |
| 12 | S&F 150mm Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed. |
| 13 | S&F Mild steel sliding door bolts 250 mm bolt length,type, stove enamelledblack, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 14 | S&F 100 mm aluminium alloy medium weight, anodised butt hinges complete all as specified and directed. |
| 15 | S & F 100 mm size long aluminium alloy, anodised handles anodised type complete all as specified and directed |
| 16 | S & F 150 mm size aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 17 | S&F in repair mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 18 | S & F stainless steel wire cloth 0.36mm normal dia of wire and average with a apparture 1.40mm and fixed with tinned tacksor stainless steel wire staples as specified and directed. |
| 19 | Dismantling boarding any description, fixed in any position with nails, complete all as specified and directed. |
| 20 | \\"For WC/Bathroom /Toilet/ Kitchen & Cabinets and cupboard.\\" S&F factory made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Plain Board of required size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade), Calcium Carbonate and natural Fibers (Wood Powders/ rice husk/ wheat husk) and Non toxic additives, made froms Extrusion process WPC foam sheet Single Extruded (Inner) with density not less than 650 kg/cbm Certified Company, having good screw holding capacity (Screw Withdrawal strength of 2000 N (Face) & 1100 N (Edge), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws, 18mm width and 1mm thick PVC edge bedding of PVC pasted on edges with suitable adhesive, SS heavy duty Telescopic slide/drawer channel with drawer pull as required complete and making good surrounding area, all as per specified and directed. Note : Material test certificate and authentication should be compulsory provided by the manufacturing company to GE. |
| 21 | \\"For WC/Bathroom /Toilet/ Kitchen & Cabinets and cupboard.\\"S&F factory made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet. Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive strength of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws, 18 mm width and 1mm thick PVC edge bedding of PVC pasted on edges with suitable adhesive, SS heavy duty Telescopic slide/drawer channel with drawer pull as required complete and making good surrounding area, all as per specified and directed. Note : Material test certificate and authentication should be compulsory provided by the manufacturing company to GE. |
| 22 | S & F in repair drawer aluminium cast type anodised handles 100mm complete all as specified and directed. |
| 23 | S & F in repair magnetic catches for cupboard , shelves etc complete all as specified and directed. |
| 24 | S & F in repair Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flap when open 30mm complete all as specified and directed. |
| 25 | S & F in repair 75 mm size aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 26 | S & F brass chromium plated tubular hanger rod 20 mm dia with suitable brackets complete all as specified and directed. |
| 27 | Taking up or down steel tubing 15 mm and connections complete all as specified and directed. |
| 28 | Supplying and laying of CPVC pipes 16 mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all fittings like union/bends/tee/elbow etc pipes complete all as specified and directed. |
| 29 | Taking up or down steel tubing 20 mm and connections complete all as specified and directed. |
| 30 | Taking up or down CPVC pipes 20 mm outer dia SDR 11 and connections complete all as specified and directed. |
| 31 | Supplying and laying of CPVC pipes 20 mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all fittings like union/bends/tee/elbow etc complete all as specified and directed. |
| 32 | Taking up or down steel tubing 50 mm and connections complete all as specified and directed. |
| 33 | S&F steel water tubing galvanised 50mm bore medium grade fixed to walls, under floors and on ceiling surfaces or in chases including all fittings complete all as specified and directed. |
| 34 | S&F steel water tubing galvanised 80mm bore medium grade fixed to walls, under floors and on ceiling surfaces or in chases including all fittings complete all as specified and directed. |
| 35 | S&F steel water tubing galvanised 150mm bore medium grade fixed to walls, under floors and on ceiling surfaces or in chases including all fittings complete all as specified and directed. |
| 36 | S&F steel water tubing galvanised 100mm bore medium grade fixed to walls, under floors and on ceiling surfaces or in chases including all fittings complete all as specified and directed. |
| 37 | S&F steel water tubing galvanised 32mm bore medium grade fixed to walls, under floors and on ceiling surfaces or in chases including all fittings complete all as specified and directed. |
| 38 | S & F in repairs PVC (SWR) 110 mm dia pipes single socketed in any length with rubber ring joints fixed to walls with MS flat band straps complete all as specified and directed. Note - the pipe shall be laid with socket or any other fitting at every 3 mtr or at any distance as directed by Engr in charge at site. |
| 39 | S & F PVC (SWR) 110 mm bends with access door any radius complete all as specified and directed. |
| 40 | PVC (SWR) 110 mm dia junction single, (Single T) equal or unequal complete all as specified and directed. |
| 41 | PVC (SWR) 110 mm dia junction double, (double T) equal or unequal complete all as specified and as directed. |
| 42 | PVC (SWR) 110 mm dia vent cowl complete all as specified and directed. |
| 43 | S & F in repairs PVC (SWR) 75mm dia pipes single socketed in any length with rubber ring joints fixed to walls with MS flat band strap complete all as specified and directed. |
| 44 | S & F in repairs PVC (SWR) 75mm dia pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 45 | PVC (SWR) 75 mm bends any radius complete all as specified and as directed. |
| 46 | PVC (SWR) 75 mm dia junction single (Single T) equal or unequal complete all as specified and directed. |
| 47 | M&L PVC (SWR) floor trap 75 mm dia, plain with grating including jointing with solvent cement, 75mm diameter of outlet, all as specified and directed. |
| 48 | S&F Grating 75 mm dia PTMT complete all as specified and directed. |
| 49 | M&L for Coloured non skid ceramic tiles of size 300 x 300 mm, 7 to 8 mm thick in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match laid over and including 15 mm thick screed bed in CM 1:4 including demolition of any type of exisitng tiles/floor complete all as specified and directed. |
| 50 | M&Lfor Coloured Glazed ceramic tiles of size 300 x 600 mm, 7 to 8 mm thick, on vertical surfaces such as skirting, dados etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match. Over and including 10 mm thick screed in CM 1:3 including demolition of any type of exisiting tiles/plaster complete all as specified and directed. |
| 51 | M&L for Coloured non skid ceramic tiles of size 400 x 400 mm, 7 to 8mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick rendering in CM 1:4 including demolition of any type of exisiting tiles/plaster complete all as specified and directed. |
| 52 | Complete removal of existing treatment of old ceiling surface and applying three coat of white wash on ceiling surfaces complete all as specified and directed. |
| 53 | M&L for old decorated plastered or unplastered surfaces of wall and Complete removal of exeisting treatment by rubbing , brooming down, washing with water etc and applying two coats of oil bound distemper complete all as specified and directed. |
| 54 | M&L for 15mm thick rendering with ready mix plaster (Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP) on brick work or on concrete surface of wall (internal surfaces) including taking down old plaster, finished even complete all as specified and directed. |
| 55 | M&L for 5mm thick rendering with ready mix plaster (Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP) on ceilling surfaces finished even and smooth including taking down old plaster complete all as specified and directed. |
| 56 | M&Lfor Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels made by wooden beads with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings, Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove incl taking down old grit plaster complete all as specified and directed. |
| 57 | M&L for 15mm thick rendering with readymix plaster (Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP) on brick work on concrete surface of wall (external surfaces) finished even and smooth complete all as specified and directed, including taking down existing grit plaster or plaster of any type, working height up to 32 mtrs with double scaffolding complete all as specified and directed. |
| 58 | M&L for preparation of new plaster surfaces of wall and applying water proof wall care putty 1-2 mm thickness over plaster surfaces to prepare the surfaces even and smooth and finishing walls with acrylic smooth exterior paint of approved shade complete all as specified and as directed. Note: Two coat to be applied @ 1.67 ltr/10 Sqm each coat, over and including a priming coat of exterior primer @2.20 Kg/10Sqm. |
| 59 | M&L for preparation of old decorated plastered surfaces of walls, complete removal of existing tretament, by rubbing brooming down, washing with water etcand providing and applying 1-2 mm thickness over plastered surfaces to prepare the surface even and smooth and finishing walls with acrylic smooth exterior paint of approved shade complete all as specified and as directed. Note: Two coat to be applied @ 1.67 ltr/10 Sqm each coat, over and including a priming coat of exterior primer @2.20 Kg/10Sqm. |
| 60 | M&L for Preparing new surfaces (plastered or unplastered surfaces) of wall and applying two coats of oil bound distemper white or tinted over and including a coat of 1mm thick wall care putty on plastered surfaces preparatory to distempering complete all as specified and directed. |
| 61 | M&L for preparation of new surface of brick/concrete plastered surfaces of ceiling by brooming down etc and applying three coats of white wash complete all as specified and directed. |
| 62 | M&L for prepapration of new or previously untreated surfaces of wood or based materials of any description not otherwise described, over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 63 | M&L for two coats of synthetic enamel paint over a coat of zinc chrome/red oxide primer including preparation of new or previously untreated steel surfaces over 10 cm in width or girth complete all as specified and directed. |
| 64 | Preparation of old painted wood or wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 65 | Preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 66 | S&F in repair Vitreous China wash basin, white, flat back, size 550 x 400 mm excluding chain and plug but including brackets or erecting stand including & 32 mm-45 gms/40mm-60 gms waste coupling of PTMT complete all as specified and directed. |
| 67 | S&F in repair 600mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 68 | S&F in repairs of CP towel rail 20mm dia and 600mm long fixed with and including chromium plated brass screws and and wooden/plastic cleats (minimum weight 190 gms) fixed on walls, complete all as specified and directed. |
| 69 | S&F in repair CP shower rose fancy type, size 125mm with 195 mm long shower arm, for 15mm bore pipe, complete all as specified and directed. |
| 70 | S&F in repair liquid soap container of PTMT fixed and including chromium plated brass screws and wooden / plastic cleats (minimum weight 105gms) to wall complete all as specified and dirtected. |
| 71 | S&F in repairs Glass Corner Shelf 6mm thick including CP railing, radius 250mm complete all as specified and directed. |
| 72 | S&F in repairs Glass shelf assembly 5.5mm thick, 600mm long 120mm wide with cp railing complete all as specified and directed. |
| 73 | S&F in repairs 15 mm angle valve, fancy type, chromium plated brass, 15mm, screwed both ends for iron pipe or for unions for 15mm bore steel tubing complete all as specified & directed. |
| 74 | S & F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 75 | S&F in repairs 2-in-1 angle valve, fancy type, chromium plated brass, 15mm, complete all as specified and directed. |
| 76 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm diapipe with 1.25 metre long flexible tube and ABS wall hook including makingconnections and fixed in position complete all as specified and dirtected. |
| 77 | S&F fancy type chromium plated brass toilet paper holder, complete all as specified and directed. |
| 78 | S&F in repairs wash hand basin mixer 15mm dia CP brass, fancy type including joints to steel pipe or unions complete all as specified and directed. |
| 79 | S&F in repair 15mm dia chromium plated quarter turn wall mixer hot & cold, L bend, 3 in 1 pattern fixing and connection to pipes, complete all as specified and directed. |
| 80 | S&F in repairs of 32mm brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, unions and cap and fixed, complete all as specified and directed. |
| 81 | S&F in repair sink with drainage board made of stainless steel 1 mm thick, kitchen or laboratory with plugs, washers and waste pipe, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 82 | S&F in repairs long body bib taps 15 mm bore chromium plated brass, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 83 | S & F in repair Vitreous China wash down pedestal pattern EWC, white and including with PVC (SWR) ' S' Trap-125 mm, seat cover with connection to drain and to flushing pipe antisyphonage pipe, and making good to floor complete all as specified and directed. |
| 84 | S&F in repair 10 Ltrs capacity PVC valveless symphonic action type flushing cistern white low level with inlet, ball valve float handle including bracket etc complete all as specified and directed. |
| 85 | S & F in repair flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern complete all as specified and directed. |
| 86 | S & F in repair CP jet spray for EWC with 1mtr long flexible stainless steel connecting pipe 15mm bore, fixed in repairs, complete all as specified and directed. |
| 87 | S&F in repairs of 80 mm bore Flanged Cast Iron Sluice Valve of make as approved by GE, class PN 1.6 ISI Mark conforming to IS-14846-2000, flanged ends drilling having stainless steel spindle with cast iron wheel at top complete with including nut and bolt washers and rubber gasket complete, including taking down old unserviceable sluice valve, complete all as specified and directed. |
| 88 | S&F in repairs of 50 mm bore Flanged Cast Iron Sluice Valve of make as approved by GE, class PN 1.6 ISI Mark conforming to IS-14846-2000, flanged ends drilling having stainless steel spindle with cast iron wheel at top complete with including nut and bolt washers and rubber gasket complete, including taking down old unserviceable sluice valve, complete all as specified and directed. |
| 89 | S&F in repairs of 150 mm bore Flanged Cast Iron Sluice Valve of make as approved by GE, class PN 1.6 ISI Mark conforming to IS-14846-2000, flanged ends drilling having stainless steel spindle with cast iron wheel at top complete with including nut and bolt washers and rubber gasket complete, including taking down old unserviceable sluice valve, complete all as specified and directed. |
| 90 | S&F Rotational moulded polyethylene water storage tanks 500 ltr capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . /25mm-455gms/ 40mm - 690 gms) and Nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms after dismantling existing unserviceable overhead tank of any size and in any position, description complete all as specified and directed. |
| 91 | S&F in repairs Stop valve of PTMT 20mm any colour high pressure screwed for iron pipe and fixed. (Minimum weight15mm-90gms/ 20mm- 92gms) complete all as specified and directed. |
| 92 | Supply only Liquid water proofing compound as per IS complete all as specified and directed. |
| 93 | S&F MS framed work such as in door frame, door shutters / gate of angle/staging for water tank/railing/grills/sliding door bolt or other section with gusset plates, rails, braces, etc complete , drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hings or steel hanging door fittings, including fastening and fixing of Fe 410-W (Gde E-250 quality) etc complete all as specified and directed. Please Enable Macros to View BoQ information |
| 94 | S&F MS framed work such as in door frame, door shutters / gate of angle/staging for water tank/railing/grills/sliding door bolt or other section with gusset plates, rails, braces, etc complete , drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hings or steel hanging door fittings, including fastening and fixing of Fe 410-W (Gde E-250 quality) etc complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 17, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 8 daysJul 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender