Tender For E/M Welcome Maintenance Of Md Accommodation Under Age E/M Of Ge (Central) Bangalore
Tender Value
30 Lakhs
Estimated cost
Bid Submission
10 Jul 2026
3 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For E/M Welcome Maintenance Of Md Accommodation Under Age E/M Of Ge (Central) Bangalore
BOQ
| Sl. No. | Item Description |
| 1 | Taking down copper/ aluminium point wiring(light, fan, socket or power) complete, including fittings and fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperately) and making good distrubed surfaces of wall, floors, etc complete all as specified and directed. |
| 2 | M&L for Point wiring for One light point / Fan point/ Bell point controlled by one 5 Amps switch one way with PVC insulated and unsheathed FRLS cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts grade cable conforming to IS-694 1990 drawn in and including PVC rigid non metalic conduit Concealed conforming to IS-9537 with all accessories including fabricated MS terminal boxes fixed flush with wall surface with 3mm thick laminated sheet top cover fixed with brass screw for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed Note : Location of light points, socket points and light fittings may be decided by Engr-in-charge as per site/user requirment. |
| 3 | All as per item No 2 above but for One light point controlled by one 5 Amps switch two way complete all as specified and directed. |
| 4 | All as per item No 2 above but for One 3 pin socket point 5 Amp on independent board complete all as specified and directed. |
| 5 | All as per item No 2 above but for One 3 pin socket point 5 Amp on same board with other switches complete all as specified and directed.. |
| 6 | All as per item No. 2 above but with 2.5 sqmm ( Nominal area ) cable with 2.5 Sqmm size copper earth continuity conductor for 3 pin 15 A socket outlet on independent board complete all as specified and directed. |
| 7 | M&L for Point wiring for One light point controlled by one 5 Amps switch one way with PVC insulated and unsheathed FRLS cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts grade cable conforming to IS-694 1990 drawn in and including PVC rigid non metalic conduit on surface conforming to IS-9537 with all accessories including fabricated MS terminal boxes fixed flush with wall surface with 3mm thick laminated sheet top cover fixed with brass screw for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed.Note : Location of light points, socket points and light fittings may be decided by Engr-in-charge as per site/user requirment. |
| 8 | All as per item No 7 above but for One 3 pin socket point 5 Amp on independent board complete all as specified and directed. |
| 9 | All as per item No 7 above but for One 3 pin socket point 5 Amp on same board with other switches complete all as specified and directed. |
| 10 | All as per item No. 7 above but with 2.5 sqmm ( Nominal area ) cable with 2.5 Sqmm size copper earth continuity conductor for 3 pin 15 A socket outlet on independent board complete all as specified and directed. |
| 11 | M&L for Point Wiring for One light point controlled by one 5 Amps switch one way with 1.5 Sqmm (Nominal Area) PVC insulated unsheathed 1100 Volts Grade Stranded Copper Conductor Cable (Red Colour Cable for Phase and Black Colour Cable for Neutral), laid in and including PVC Casing and Capping with Accessories (size of Casing and Capping as required at Site) including 1.50 Sqmm PVC ins-ulated Stranded Copper Conductor Cable (Green Colour) as Earth Continuity Conductor and connected to Common Earth Dolly or as directed and MS terminal box with 3mm thick masonite laminated sheet top cover fixed on Wall for one light and fan point controlled by one switch complete all as specified and as directed Note : Location of light points, socket points and light fittings may be decided by Engr-in-charge as per site/user requirment. |
| 12 | All as per item No 11 above but for One 3 pin socket point 5 Amp on independent board complete all as specified and directed |
| 13 | All as per item No 11 above but for One 3 pin socket point 5 Amp on same board with other switches complete all as specified and directed. |
| 14 | All as per item No. 11 above but with 2.5 sqmm ( Nominal area ) cable with 2.5 Sqmm size copper earth continuity conductor for 3 pin 15 A socket outlet on independent board complete all as specified and directed. |
| 15 | S&F Switch piano, flush button single pole, 6 Amps one way complete all as specified and directed. |
| 16 | S&F Switch sokcet combination flush type 5 Amp 2/3 pin muliti purpose complete all as specified and directed. |
| 17 | S&F Switch socket combination flush type 6/16 Amps 3/3 pin universal multipurpose complete all as specified and directed. |
| 18 | S&F Fan regulator electronic, step & socket type 230 volt, suitable for 1200/1400mm sweep ceiling fan complete all as specified and directed. |
| 19 | S&F Ceiling rose surface bakelite 65x50mm three terminals including supply and fix PVC blocks complete all as specified and directed. |
| 20 | S&F modular switch 1 way 6A/10A,1 module complete all as specified and directed. |
| 21 | S&F modular switch 1 way 16A,1 module complete all as specified and directed. |
| 22 | S&F socket, 10A-2/3 pin combined 2 modules complete all as specified and directed. |
| 23 | S&F socket, 16A/16A-2/3 pin combined 2 modules complete all as specified and directed. |
| 24 | S&F moduler fan Requlator, 120 W-2 modules complete all as specified and directed. |
| 25 | S&F modular bell push 5 Amp all as specified and directed by Engr-in-charge. |
| 26 | S&F in repair Switch piano, flush button single pole, 5 Amps one way complete all as specified and directed. |
| 27 | S&F in repair sokcet flush type 6 Amp 2/3 pin muliti purpose complete all as specified and directed. |
| 28 | S&F in repair bell push,flush type 5 Amp all as specified and directed by Engr-in-charge. |
| 29 | S&F in repair Switch sokcet combination flush type 5 Amp 2/3 pin muliti purpose complete all as specified and directed. |
| 30 | S&F in repair Switch socket combination flush type 5/15 Amps 3/3 pin universal multipurpose complete all as specified and directed. |
| 31 | S&F in repair Switch sokcet combination With Gang box flush type 5 Amp 3/5 pin muliti purpose complete all as specified and directed. |
| 32 | S&F in repair Switch sokcet combination With Gang box flush type 15 Amp 3/5 pin muliti purpose complete all as specified and directed. |
| 33 | S&F in repairs modular switch 1 way 10A,1 module complete all as specified and directed. |
| 34 | S&F in repairs modular switch 2 way 10A,1 module complete all as specified and directed. |
| 35 | S&F in repairs modular switch 1 way 16A,1 module complete all as specified and directed. |
| 36 | S&F in repairs socket, 10A-2/3 pin combined 2 modules complete all as specified and directed. |
| 37 | S&F in repairs socket, 16A/16A-2/3 pin combined 2 modules complete all as specified and directed. |
| 38 | S&F in repairs moduler fan Requlator, 120 W-2 modules complete all as specified and directed. |
| 39 | S&F in repair modular bell push 5 Amp all as specified and directed by Engr-in-charge. |
| 40 | S&F in repair Door bell electronic, music type, 230 volt AC complete all as specified and directed. |
| 41 | S&F in repair wireless Door bell electronic, music type, 230 volt AC complete all as specified and directed. |
| 42 | S&F in repair Fan capacitor 2.5/3.15 mfd suitable for 1200/1400mm sweep ceiling fan complete all as specified and directed. |
| 43 | S&F in repair Fan regulator electronic, step & socket type 230 volt, suitable for 1200/1400mm sweep ceiling fan complete all as specified and directed. |
| 44 | S&F in repair Fan regulator electronic, step & Switch type 230 volt, suitable for 1200/1400mm sweep ceiling fan complete all as specified and directed. |
| 45 | S&F in repair white cover plate with frame 2 modules complete all as specified and directed. |
| 46 | S&F in repair white cover plate with frame 3 modules complete all as specified and directed. |
| 47 | S&F in repair white cover plate with frame 4 modules complete all as specified and directed. |
| 48 | S&F in repair white cover plate with frame 6 modules complete all as specified and directed. |
| 49 | S&F in repair white cover plate with frame 8 modules complete all as specified and directed. |
| 50 | S&F in repair white cover plate with frame 12 modules complete all as specified and directed. |
| 51 | S&F in repair Matel flush box 1/2 modules complete all as specified and directed. |
| 52 | S&F in repair Matel flush box 3 modules complete all as specified and directed. |
| 53 | S&F in repair Matel flush box 4 modules complete all as specified and directed. |
| 54 | S&F in repair Matel flush box 6 modules complete all as specified and directed. |
| 55 | S&F in repair Matel flush box 8 modules complete all as specified and directed. |
| 56 | S&F in repair Matel flush box 12 modules complete all as specified and directed. |
| 57 | S&F in replacement LED tube light fitting of 10 watts 6000K , 230 volt, with Basic all purpose surface and wall mounted LED batten with aluminium extruded housing & integrated electronic driver complete with all fixing accessories such as 2 nos of PVC square/round boxes, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed by Engr-in-charge. |
| 58 | S&F in replacement LED tube light fitting of 20 watts 6000K , 230 volt, with Basic all purpose surface and wall mounted LED batten with aluminium extruded housing & integrated electronic driver complete with all fixing accessories such as 2 nos of PVC square/round boxes, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed by Engr-in-charge. |
| 59 | S&F in repair bldg security light light fittings 1x 25 Watt LED street light with New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08 with all accessories and including connection up with twine core twisted flexible copper conductor cable with 1.5 M long suitable size all as specified and directed. |
| 60 | S&F in repair security light bracket made out of 25 mm bore GI Light grade 1.00 M long to required shape as in bracket for steet light fittings fixed with two pair of MS flate iron clamp of size 32mm X 5 mm thickness of required shape with nuts, bolts and washers suitable for steel tubular pole including painting of mild steel flate iron surface with two coates of synthetic enamel paint over a coat of red oxide primer complete including taking down unserviceable one all as specified and directed. |
| 61 | S&F in repair Sheet metal enclosure (ISI marked) distribution board VTPN, 415 volts, 4 way Vertical type double door type, 200 Amps rated neutral copper bus bar for housing MCB and fixed and tested on completion complete all as specified and directed. |
| 62 | S&F in repair Sheet metal enclosure (ISI marked) distribution board TPN, 415 volts, 4 way horizontal type double door type, 200 Amps rated neutral copper bus bar for housing MCB and fixed and tested on completion complete all as specified and directed. |
| 63 | S&F in replacement Sheet metal enclosure (ISI marked) distribution board for 240 volts, SPN 12 way horizontal type, double door, single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB and fixed flush in wall surface, and tested on completion complete all as specified and directed. |
| 64 | S&F in repair Sheet metal enclosure (ISI marked) distribution board for 240 volts, SPN 4 way horizontal type, double door, single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB and fixed flush in wall surface, and tested on completion complete all as specified and directed. |
| 65 | All as per item No 64 here-in before but SPN 8 ways DB complete all as specified and directed. |
| 66 | S&F in repair MCB single pole 6 to 32 Amps 240 volts, C series, 10 kA rupturing capacity complete all as specified and directed. |
| 67 | S&F in repair MCB single pole & neutral 32 Amps 240 volts, C series,10 kA rupturing capacity |
| 68 | S&F in repair MCB Tripple pole & neutral 40 to 100 Amps 415 volts, C series,10 kA rupturing capacity providing in DB complete all as specified. |
| 69 | S&F in repair MCB Tripple pole & neutral 100 to 125 415 volts, C series,10 kA rupturing capacity providing in DB complete all as specified. |
| 70 | S&F in replacement Sub main wiring with 2 runs of 4.0 sqmm, single core, PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in existing non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4 sqmm single core PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as specified and directed. Note : 2 runs 4 Sqmm cable, one run 4 Sqmm cable and one run of PVC Conduit /Casing caping shall be measured as one unit length. |
| 71 | S&F in replacement Sub main wiring with 2 runs of 6.0 sqmm, single core, PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in existing non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 6 sqmm single core PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as specified and directed. Note :- 2 runs 6 Sqmm cable, one run 6 Sqmm cable and one run of PVC Conduit/Casing caping shall be measured as one unit length. |
| 72 | Taking down ceiling/exhaust fan dismantling and painting of ceiling/exhaust fan complete at site with synthetic enamel paint by spraying incl (fittings with filler) one coat after cleaning all dust etc incl connecting up. Provn of twin core cable of suitable size for ceiling rose to connector connecting of earth wire incl replacement of fan capacitor 2.5/3.15 MFD,canopy, bearing/bush, rubber bushes minor nuts bolts screws washers greassing in fan bearing & refix same complete all as specified and directed |
| 73 | M&L for Rewinding of Exhaust fan with appropriate size of copper enamelled wire including varnishing, heating with proper insulation complete and testing complete all as specified and directed. |
| 74 | M&L for Rewinding of ceiling fan with appropriate size of copper enamelled wire including varnishing, heating with proper insulation complete and testing complete all as specified and directed. |
| 75 | S&F in replacement of ceiling fan complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep Min air delivery 210 CFM with service value 6 BEE, Five star rated with brushless direct current motor (BLDC) complete all as specified and directed by Engr-in-charge.Note: old fan obtained from this item shall be handing over to AGE E/M storeyard for safe custody |
| 76 | S & F in replacement of exhaust fan sweep made of sturdy Engineering plastic complete with louvers shutter,voltage 230 V, 50 Hz, 1200 RPM noiseless,copper winding of sweep 200 mm with self closing louvers and blades complete fittings complete all as specified and as directed.Note: old fan obtained from this item shall be handing over to AGE E/M storeyard for safe custody |
| 77 | S & F in replacement of exhaust fan sweep made of sturdy Engineering plastic complete with louvers shutter,voltage 230 V, 50 Hz, 1200 RPM noiseless,copper winding of sweep 150 mm with self closing louvers and blades complete fittings complete all as specified and as directed.Note: old fan obtained from this item shall be handing over to AGE E/M storeyard for safe custody |
| 78 | S & F in replacement of exhaust fan sweep made of metal body complete with louvers shutter,voltage 230 V, 50 Hz, 1200 RPM noiseless, copper winding of sweep 225/300 mm with self closing louvers and blades complete fittings complete all as specified and as directed.Note: old fan obtained from this item shall be handing over to AGE E/M storeyard for safe custody |
| 79 | M&L for Core Cutting for exhaust fan on wall & repairing and matching with existng exhuast fan sweep complete all as specified and as directed. |
| 80 | S&F in replacement of LED Bulb of 7/9/11 watt complete all as specified and directed by Engr-in-charge. |
| 81 | S&F in repairs Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by Engr-in-charge. |
| 82 | S&F in repair heating element of 1.5 KW as per sample or as per existing as required at sites including rubber washers complete all as specified and directed. |
| 83 | All as per item No 82 above but 2 KW complete all as specified and directed. |
| 84 | S&F in replacement PVC connection pipes 15mm dia for hot / cold water supply with brass adopters 600 mm long complete all as specified and directed. |
| 85 | S&F thermostat for the geyser of 25 - 50 ltr capacities duly ISI Marked as per sample complete all as specified and directed. |
| 86 | S&F in replacement of air circular heavy duty wall mounting fan 300 to 450 mm sweep ,230 volts , Single Phase ,Oscilating type, multi speed, with built in selector switch & pull cord control including making connection complete including marking of MES number with synthetic enamel paint complete all as specified and directed.Note: old fan obtained from this item shall be handing over to AGE E/M storeyard for safe custody |
| 87 | M&L for Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6.0mm thick buried directly in ground (earth pit depth not less than 2.25m deep below the ground level) with top edge of earth plate at a depth not less than 1.5m below ground level connected to earth using GI earth wire of 4 mm dia by means of of nuts, bolts and washer and check nuts of GI or steel as shown in electrical plate No.3 of MES SSR-2009 (Part-I) and connected to earth test point all as specified or indicated including testing on completion with and including 15mm bore light grade GI protection pipe 7.5 metre long for earth including PCC (1:2:4) pit with RCC (1:2:4) type B-1 cover, 40mm thick reinforced with 6mm dia MS bars @ 100mm both ways with lifting hooks made out of 6mm dia MS bars, watering arrangement with 20mm dia light grade pipe, funnel, wire mesh, common salt chorcoal, necessary excavation and earth work in any type of soil complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender