|
| 1 | Excavating in soft soil post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,complete all as specified |
| 2 | M&L PCC (1:3:6) type D2 (using 40 mm graded stone aggregate) for fdn/ mass concrete complete all as specified |
| 3 | S&F steel work in Trusses, purlins, posts and the like using tubular/ square hollow section including special shaped washer etc. complete using ERW or induction butt welded tubes/SHS conforming I.S.1161-2014/IS 4923-1977 grade St-240 complete all as specified |
| 4 | M &L for Stone Hardcore of gauge n exc. 63 mm, spread and levelled in layers n exc.15 cm thick, watered and rammed to a true surface complete all as specified |
| 5 | M&L for 75 mm thick cement concrete type C2 (1:3:6 ) (40 mm graded aggregate) as in subbase of floor etc and finished thecomplete all as specified |
| 6 | Sand filling under floors or in foundations including watering and consolidation complete all as specified |
| 7 | M & L 60mm thick M-35 grade factory made vibratory compacted cement concrete rubber moulded, interlocking paver block any shape and size confiroming to IS 15658-2006 with grey cement and pigment as approved laid over and incl 50 mm thick consolidated sand cushion and joints filled with sand complete all as specified |
| 8 | Surface excavation in soft soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all as specified |
| 9 | M&L PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) for fdn/ mass concrete complete all as specified |
| 10 | M&L for 50 mm thick cement concrete type B2 (1:2:4 ) (40 mm graded aggregate) as in subbase of floor etc and finished the complete all as specified |
| 11 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified |
| 12 | M&L for two coat of synthetic enamel paint over a coat of red oxide primer including preparation on steel surfaces of any description over 10 cm width or girth complete all as specified |
| 13 | Excavation in trenches, n exc 1.5 mtr wide and n exc 1.5 mtr in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n exc 10 Sqm on plan and n exc 1.5 mtr in depth and getting out in soft/loose soil complete all as specified |
| 14 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified |
| 15 | Removing excavated materialn exc. 50m and depositing wheredirected at a level n exc. 1.5 m above the starting point complete all as specified |
| 16 | M&L for Fly ash brick work with old size sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified |
| 17 | M&L for rendering 20mm thick in cement mortar 1:4 in two layers of 10mm each using WPC in finishing layer on brick or concrete surfaces finished even & fair (WPC for finishing layer will be paid seperately as supply only) etc complete all as specified |
| 18 | Supply only liquid water proofing compound complete all as specified |
| 19 | M & L for preparing new Plastered surfaces of walls and finishing the walls with Acrylic smooth exterior paint of required shade : New work (Two or more coats applied over and including priming coat of exterior primer applied etc complete all as specified Please Enable Macros to View BoQ information |
