|
| 1 | Dismantling floor, hearth or wall tiling incl cement mortar bedding and rubbish off the premises all as directed. |
| 2 | M&L for joint free anti- skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and and 15 mm thick adhesive and spacer complete. |
| 3 | Material and Labour for joint free glazed ceramic coloured tiles of approved quality in vertical surfaces 450mmx300 mm x7mm/ 600mm x 300 x 7mm thick set jointed in neat cement slurry/paste and pointed in coloured cement to match with the tiles over and including 10 mm thick adhesive and spacer complete. |
| 4 | Taking down chowkhats or frame with shutter (without taking off shutters from the frames) not exceeding 1.5 Sqm each and removal from site complete all as specified and directed. |
| 5 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction ofEngineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extrapayment on this account shall be made, |
| 6 | S & F Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant nd ixingwith stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) . Note :- including 3 Nos for each door Stainless steel 100mm long but hings with Stainlessd steel screws, 2 Nos stainless steel barrel tower bolts of extrude section, 150mm long (ISI marked), 2 Nos stainles steel handles, 125 mm long, (ISI marked). |
| 7 | S&F in repairs white vitreous china wash down water closet pan (pedastal pattern) with and including plastic water closet seat white black , closed pattern with flat bottom and cover and mild steel chromium plated or aluminum hinging device incl flush pipe and fixing bolts ( excluding flushing cistern) etc complete all as specified and directed. |
| 8 | Supply and fixing in repairs 10 litres capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets including 32 mm dia flush pipe of polyethylene of low or high density of PVC complete all as specified and directed. |
| 9 | Supplying and laying of CPVC pipes of 16 mm outer dia, SDR 11 & Plain CPVC SDR 11 fittings in trenches and fixed to walls & ceilings or laid in floors, including taking down old one of any type ,complete all as specified and directed. |
| 10 | Supplying and laying of CPVC pipes of 20 mm outer dia, SDR 11 & Plain CPVC SDR 11 fittings in trenches and fixed to walls & ceilings or laid in floors, including taking down old one of any type ,complete all as specified and directed. |
| 11 | S & F in repair angular stop valves, cast copper alloy, but fancy type,chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 12 | Supply and fixing in repair bib taps cost copper alloy with crutch or butterfly handle , screwed down , chromium plated fancy type screwed for iron pipe or brass ferrul for 15MM bore dia pipe complete all as specified and director. |
| 13 | Supply and fixing in repair 15mm bore fancy type chromium plated stop wall cast copper alloy, with long shank hand cup in (concealed type ) with crutch over butterfly handle, screwed down, screwed for iron pipe or for brass ferrul complete all specified and directed. |
| 14 | S&F in repair Brass chromium plated shower rose 70 mm dia with arm and with or without swivel joints to steel pipe or union complete all as specified and directed. |
| 15 | S & F in repairs 15mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with o without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. |
| 16 | S&F in repairs PVC waste pipe with socket suitable for connection to Waste fittings of 32/40mm dia, and of length minimum 75 cm complete all as specified and directed. |
| 17 | S & F in repair PVC connection 15 mm size with brass nuts of length 450 mm of approved quality complete all as specified and directed. |
| 18 | Supply and fixing 110 mm bore PVC (SWR) pipe type -A single socketed in any length with rubber ring joint fixed to walls with MS clamps, including Taking down old AC eaves gutters and rainwater pipes (anysize and pettern), including all fittings, compete all as specified and as directed. |
| 19 | S&F 110 mm bore of pipe PVC (SWR) pipes type - A single socket in any length with rubber ring joint laid in trenches or in floors as in waste or vent pipe, including taking down old CI/PVC pipe complete all as specified and directed. |
| 20 | S&F 110 mm bore of PVC (SWR) bends and tee, type - A of any radius / shoe fixed to PVC pipes complete all as specified and directed. |
| 21 | S&F 75 mm bore of pipe PVC (SWR) pipes type - A single socket in any length with rubber ring joint fixed to walls with MS clamps of F1 25x2mm complete all as specified and directed. |
| 22 | S&F 75 mm bore of PVC (SWR) bends & tee, type - A of any radius / shoe fixed to PVC pipes complete all as specified and directed. |
| 23 | Supply and fixing in repair PVC SWR floor trap, 75mm dia with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate including CP gratting of suitable size complete all as specified and directed. |
| 24 | Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specied and directed. |
| 25 | Material and labour for rendering 15 mm thick in cement mortar in (1:6) on other then fair faces of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified and directed. |
| 26 | Material and labour for rendering 5 mm thick in cement mortar in (1:3) on ceiling and finishing the surface even & smooth without using extra cement complete all as specified and directed. |
| 27 | Preparation of old/New surfaces and applying 02 coats of interior emulsion paint (light shade) @ 10 sq.m/litre/2 coats by using roller/brush to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat and two coat wall care putty as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. |
| 28 | Preparation of Old/New surfaces and applying 02 coats of interior emulsion paint (white shade) @ 10 sq.m/litre/2 coats to ceilings surfaces over & including a coat of interior primer @ 10 sq.m/litre/1 coat and two coat wall care putty as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. |
| 29 | Demolition of concrete of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 30 | Water proofing treatment to sunken slab and adjoining vertical surfaces as specified under:- (a) Cleaning of RCC surface to remove dust , loose particles etc with compressed air or any other suitable technique depending on site conditions grinding any sharp edges etc complete all as specified and as directed by engr-in-charge.(b) Supply and apply a glass fibre reinforced modified cementitious coating system (i) Base Coat : HS LATEX plus ( Consumption base coat 0.30kg/Sqm) (ii) Reinforcement : Glass Fibre (iii) Second And Third Coat : HS Latex Shield 2K (consumption Qty 3 Kg/Sqm) System Requirement : density 2.00kg/ltr abd Compressive Strength : 0.5N/mm2 (b) M&L rendering 15 mm thick in cement plaster (1:4) using coarse sand mixed admixed with integral water proofing compound as per manufacturer's instruction trowel even and smooth with steel trowel on sunken surfaces Note : HS Power Plasticizer (Consumption :0.10 kg per Bag of Cement ) |
| 31 | Material and labour for Aerated Autoclaved Concrete (AAC) blocks work according to Indian Standard specification IS:2185(Part-3)-1984 and latest revision built in Cement and sand mortar 1:6 with Aerated Autoclaved Concrete (AAC) blocks straight or curve on plan exceeding 6mtr Mean radius as in sunken floor complete all as specified and as directed by Engineer-in-charge. Please Enable Macros to View BoQ information |
