Tender For Ca No : Maintenance And Repair Of Security Wal,L Sewer Path, Hardstanding And Misc Wks In Northern & Southern Garrison At Sunderbani And Barakh Under Ge (N) Akhnoor
Tender Value
30 Lakhs
Estimated cost
Bid Submission
11 Jul 2026
4 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rajouri → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Ca No : Maintenance And Repair Of Security Wal,L Sewer Path, Hardstanding And Misc Wks In Northern & Southern Garrison At Sunderbani And Barakh Under Ge (N) Akhnoor
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 01-Jul-2026 | BOQ Corrigendum | BOQ | 11-Jul-2026 |
| 2 | 01-Jul-2026 | Tender Corrigendum | Other | 11-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brickwork or stone boulder masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed |
| 2 | Walling of random rubble uncoursed, well bonded, bedded and solidly hearted built in CM 1:4 complete all as specified. |
| 3 | Description all as per item No.02 above, but except stone, complete all as specified and directed |
| 4 | Brick work with sub class ‘B’ bricks straight or curved on plan built in cement mortar 1:6, complete all as specified. |
| 5 | -Ditto- all as per item No 4 above but except bricks. |
| 6 | Raised pointing to random rubble, uncoursed or brought upto course masonry in CM 1:4 complete all as specified. |
| 7 | Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surface not exceeding 40mm to face stones (lime and sand stone) and dressing of face beds and joints, complete all as specified. |
| 8 | Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed. |
| 9 | Rendering 15mm thick on fair faces of brick work or cement concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and as directed.Note : WPC should be added seperately |
| 10 | Preparation of newly plastered and unplastered surfaces of walls and applying two coats of cement based paint over a coat of Alkali resistance primer complete all as specified and as directed. |
| 11 | Preparation of old painted surfaces by washing, rubbing down and stopping of distempered and painted surface of walls and applying one coats of cement base paint Tinted - Yellow or Green complete all as specified and as directed. |
| 12 | Preparation of new plastered surfaces of walls and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces complete all as specified and directed. Note:-(i) The work shall be carried out in different shade and the same shall be got approved GE(ii) The work may be carried out upto 4th storey of bldgs and no extra payment shall be admissible for necessary form work & scaffolding required for the same. |
| 13 | Complete removal of existing surface and preparation of old decorated surface of walls and applying two coats of emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm on wall surface, complete all as specified and directed.Note:-(i) The work shall be carried out in different shade and the same shall be got approved fromGE(ii) The work may be carried out upto 4th storey of bldgs and no extra payment shall be admissible for necessary form work & scaffolding required for the same. |
| 14 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in concrete, brick work, masonry etc and making good disturbed ground, complete all as specified and directed.Notes : - This item shall also include the demolition of foundation concrete/hard core and taking out the posts and struts carefully and removing the same from site. |
| 15 | Excavation in post holes each not exceeding 0.5 cum getting out in any type of soil, returning, filling in, including spreading, leveling, watering and well ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, watering, complete all as specified and directed. |
| 16 | Plain Cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in post holes, filling mass concrete complete all as specified and directed. |
| 17 | Mild steel work conforming to Fe 410-W Gde E-250 as in posts and struts etc in fencing including cutting tops to shape as directed, drilling holes, notching for wire, flat iron fillets (for securing barbed wire etc) including all necessary drilling, bolting or riveting etc and similar work complete all as specified and as directed. |
| 18 | S& F in Repair Galvanised, 2 strand steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing and tying at crossings with and provision of galvanized mild steel wire, staple or steel pins, etc fixed in repairs complete all as specified and directed.Note;-Each line of wire shall be measured for record of measurement. |
| 19 | Preparation new steel and iron surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer, complete all as specified and as directed. |
| 20 | Preparation of old steel surfaces of any description exc 10 cm width or girth, and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 21 | Dismantling of existing structural steel work including doors, gates but excluding framed truss etc. Embedded in concrete /hard core incl taking out embedded portion and making good disturbed ground complete all as specified and directed. |
| 22 | Mild Steel Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or (G&E-250) complete all as specified and directed. |
| 23 | Mild steel framed work as in door or gate of angle or other section with gusset plate, rail braces complete drilled for fixing of steel sheeting or other covering . door etc to be prepared for hanging of sliding with grills, grating etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, conforming to Fe-410-W(Gde-E-250) quality-A, complete all as specified and directed . |
| 24 | PCC 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregate), for fixing of hold fast, copings, plinth bands bed blocks kerb or mud stops,rounded or chamfered angles and edges, including necessary form work complete all as specified and directed. |
| 25 | Taking down old concertina coil of any dia over security wall and removing from the site complete all as specified and directed. |
| 26 | Concertina coil 600mm dia / 56 loops / 2.5 mm core wire, Coil Diameter: 600 mm, Type of Strip: Heavy Galvanised (IS:1703), Type of Core wire: Heavy Galvanised (IS:280-2006), Core wire Diameter: 2.50 mm Dia, Zinc Coating to Strip: Minimum 200 GSM/sqmm, Zine Coating on wire: Minimum 275 GSM/sqmm (IS 6745-1972 reaffirmed 2006), Tensile Strength of wire 1400-1500 N /sqmm, Weight: 6-8 Kg per RM (± 5%), Number of Loops: 56. Blade Length: 22 MM, Barb Profile: Medium Blade (MBBT), Distance Between Barb. 35 mm, Stretchable length 10-12 mtrs, Type of clip: Hardened Steel in Galvanised steel, complete all as approved. |
| 27 | Demolition of Cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for including removal of rubbish off the premises complete all as specified and directed. |
| 28 | PCC 1:2:4, B-2 (40mm graded crushed stone aggregate) as in surface channels and drain etc includind necessary framework complete all as specified and directed. |
| 29 | 110mm bore PVC SWR Type-B ( pressure not less than 6 kg /cm2) pipes single socket in any length with rubber ring joints laid in trenches or in floors etc., complete all as specified and directed. |
| 30 | Providing Precast Cement concrete type B-1 (20 mm graded crushed stone aggregates) in window or door cills, inlets, bressumers, steps, quoin blocks ( for use with masonary) string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchoraghe blocks, bounders (for stonewalling) corbels, brackets etc. (of any section indicated) with plain fair faces, including chamfers, weatherings, throating etc and setting in cement mortar 1:4 complete with joints to match complete all as specified and as directed . |
| 31 | Providing precast Cement concrete type B-1 (20 mm graded crushed stone aggregates) louvers and jallies (jafri), 25mm thick (measured solid), including all mouldings set in cement mortar 1:4 but all as specified and as directed. |
| 32 | Supply only liquid water proofing compound. |
| 33 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically described (reinforement cut as required to facilitate demolition), complete all as directed. |
| 34 | Precast reinforced cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in manhole cover slabs and finishing the surface as per clause 4.11.16 and MES SSR Part-I |
| 35 | TMT bars, 8 mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia complete all as specified. |
| 36 | Excavation in trenches n. exc.1.5m wide and n. exc. 1.5m in depth and getting out in any type of soil complete all as specified and directed. |
| 37 | Demolition and breaking up drain pipe 150mm dia (salt glazed ware, AC, PVC or reinforcement concrete) set in cement mortar/concrete complete all as specified. |
| 38 | Plain Cement concrete bed (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in concrete bed to150mm dia drain pipe including packing under and haunching against the side of the pipe after they are laid and tested, complete all as specified & directed. |
| 39 | RCC class NP3 150mm dia drain pipes laid in trenches and jointed with & including collar complete all as specified and directed. |
| 40 | Returning filling in, including spreading, leveling, watering and well ramming in layers not exc. 25cm, complete all as specified and directed. |
| 41 | Removing surplus soil to distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed. |
| 42 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cementt concrete 1:2:4 type B-1 smooth finished, and reforming benching as required, internal dia of pipe in 150mm, complete all as specified and directed. |
| 43 | Plain Cement Concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete. |
| 44 | PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate),as in benching weathering slightly rounded or chamfered angles of interlocking tiles protection and including necessary form work |
| 45 | Taking down eaves gutters and rain water pipe , soil and waste pipe (any size or pattern ), includding all fittings, heads , shoes bends , swan-necks etc . All as specified and directed. |
| 46 | 75mm bore PVC SWR Type-B pipes (pressure not less than 6 kg /cm2) single socket in any length with rubber joints laid in floors/trenches etc all as specified and directed. |
| 47 | PVC SWR 110mm dia Type-B ( pressure not less than 6 kg /cm2) pipes in any length fixed to walls with PVC/MS holder or clamps and conforming to IS-1729 complete all as specified and directed. |
| 48 | PVC SWR 75mm dia Type-B ( pressure not less than 6 kg /cm2) pipes in any length fixed to walls with PVC/MS holder or clamps and conforming to IS-1729 complete all as specified and directed. |
| 49 | PVC SWR bends any radius 110 mm bore with oval access door all as specified and as directed. |
| 50 | PVC SWR bends any radius 75 mm bore with oval access door all as specified and as directed. |
| 51 | PVC (SWR)110 mm junction single, (Single T) equal or unequal ordinary or inverted with spigot or socket branch with oval access door all as specified and as directed. |
| 52 | PVC (SWR) 75 mm junction double, (Double Y) equal or unequal ordinary or inverted with spigot or socket branch with oval access door all as specified and as directed. |
| 53 | PVC cowls 110mm complete all as specified and directed. |
| 54 | PVC cowls 75mm complete all as specified and directed. |
| 55 | PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 56 | PVC (SWR) 'P' trap fitted at base of existing WC seat (after removing same and refixing after replacing 'P' trap in same position) incl repairing surrounding surface with cement mortar, making good dismantled floor in cement mortar (1:2:4) type B-1 (using 20mm graded crushed stone aggragate) complete all as specified and directed. |
| 57 | CP angle valve/concealed stop cock of cast copper alloy (ISI Marked) chromium plated fancy type scrwed down high pressure with capstain head screwed both ends for iron pipe 15mm bore incl replacement of unserviceable existing ones complete all as specified and directed. |
| 58 | PVC valve less, Symphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete, fixed in repairs complete all as specified and as directed. Makes:- Parryware, Hindwara, Cera and Jaquar |
| 59 | Vitreous china squatting pan \\"Orissa Pattern\\" size 580 x 440 mm in white colour with integral foot rest incl lime mortor, 'P' trap including making good to dismantaled floor in cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregates) fixed in repair complete all as specified and directed.Cat Part No-20042 (ORISSA PAN (ECO) of Hindware or equivalent cat part of make specified in list make as approved by GE. |
| 60 | Plastic water closet seat cover white closed pattern with flat bottom and cover including chromium plated hinges device fixed in reapirs, complete all as specified and as directed. |
| 61 | Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.2 meter long flexible spirochrome flex tube and ABS wall hook including making connections and fixed in repair in position complete in all respect as specified.Make-Jaquar Cat part no. ALD-573 or its equivalent cat part of make specified in list make, as approved by GE. |
| 62 | PVC connection 15 mm size, of length 600 mm, with PTMT nuts supplied and fixed in repairs complete all as specified.. |
| 63 | Vitreous china wall hung wash basin with fixing accessories, white, fdlat back, size 550mm x 400mm x 185mm including 32 mm dia waste coupling, waste pipe, cutting for and pinning in ends of brackets or erecting stand porecelain stopper a pair of CI brackets fixed in repair complete all as specified and directed. |
| 64 | Vitreous china wash down water closet pan (pedestal pattern) (Size 570mm x 460mm x 380mm ) white (excluding fixing bolts, flushing cistern and flush pipe) with 'P' or 'S' trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc complete fixed in repairs complete all as specified and directed Make: Hindware Model Universal Cat No 20012 (S-25. 5/P-18) |
| 65 | Bib taps 15 mm, fancy type Chromium plated with wall flange screwed down for iron pipe or for brass ferrule and fixed in repairs complete all as specified. Cat part no. LYR-38037 of Jaquar or its equivalent cat part of make as specified in list of make, as approved by GE. |
| 66 | Pillar tap of 15mm bore dia fancy type capstan heads, chromium plated screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed in repairs complete all as specified and directed. |
| 67 | Demolition of Stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons,walls etc, complete all as specified and directed. |
| 68 | Non skid ceramic coloured tiles 7 to 8mm thick (Square/reactangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:4 complete all as specified. |
| 69 | Glazed ceramic coloured tiles 300x450x7mm thick on vertical surfaces such as skirting, dados and rises to steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10mm thick rendering in CM 1:4 on other than fair faces of brick work finished even and fair to receive tiles, complete all as specified and directed. |
| 70 | CP grating with or without hole100 mm dia fixed in repairs all as specified and as directed. |
| 71 | PVC waste pipe for WHB/Urinal/Sink of 32/40mm dia in reapirs complete all as specified & directed. |
| 72 | Systematically cleaning of 150mm/200mm dia pipe sewers/drains by passing rope, knots, bamboos, kempt and disc of required size from manholes to manholes, septic tank and well flushing after cleaning sewer line/drain pipe with water (excluding manholes and septic tanks) including safety measures such as test for existence of poisonous gas etc complete all as specified and directed. |
| 73 | Taking out/pumping contaminated sewage water/ sludge from septic tank/soakage well incl inlet/outlet chamber after plugging in incoming sewage line with suction(vaccum) type machine mounted on LMV/HMV and facility of high pressure vaccum and removing and dumping off the same in tank to a place out side contonment at the place marked for the purpose by local municipality or the authority controling the area as directed by Engr-in-charge. For the purpose of measurement and payment the net volume of the sewage water/ sludge is to be considered.Note :- Contractors are advised to ascertain the place suitable/earmarked for disposal of sludge/sewage water from local municipality or area controling authority before quoting their rates. Disposal of waste at suitable place shall be sole responsibility of contractors and no representation or objection in this regard will be entertained at any later stage. Please Enable Macros to View BoQ information |
| 74 | Taking out/pumping contaminated sewage water/ sludge from septic tank/soakage well incl inlet/outlet chamber after plugging in incoming sewage line with suction(vaccum) type machine mounted on LMV/HMV and facility of high pressure vaccum and removing and dumping off the same in tank to a place out side contonment at the place marked for the purpose by local municipality or the authority controling the area as directed by Engr-in-charge. For the purpose of measurement and payment the net volume of the sewage water/ sludge is to be considered.Note :- Contractors are advised to ascertain the place suitable/earmarked for disposal of sludge/sewage water from local municipality or area controling authority before quoting their rates. Disposal of waste at suitable place shall be sole responsibility of contractors and no representation or objection in this regard will be entertained at any later stage. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 11, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 days
Jul 11, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysJul 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender