|
| 1 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 2 | Providing and applying white cement based putty of average thickness 1 mm,of approved brand and manufacturer, over the plastered wall surface ofcement 78.35 to prepare the surface even and smooth complete. |
| 3 | Finishing walls with acrylic smooth exterior paint of required shades : 13.46.1 New work (Two or more coat applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/4010sqm) |
| 4 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 13.99.1 One or more coats on old work |
| 5 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour :13.41.1 New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than50 gram/litre |
| 6 | Dismantling old plaster or skirting raking out joints and cleaning thesurface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 7 | 12 mm cement plaster of mix: 13.4.2 1:6 (1 cement : 6 coarse sand) |
| 8 | 1:2:8 (1 cement: 4 coarse sand (zone-III) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derved from natural sources) |
| 9 | 11.2 Chequerred precast cement concrte tiles 22mm thick in footpath &court yard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc.complete, on 20mm thick bed of cement mortar 1:4 (1cement : 4 coarse sand).11.20.2 Medium shade pigment using 50% white cement 50% Greycement |
| 10 | Taking out doors, window sand clerestory window shutters (steel or wood) including stacking within 50 metres lead: 15.13.1 Of area 3 sq.metres and below |
| 11 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (PartI) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 9.21.2- 30mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 12 | 1:2:4 (1 cement: 2 coarses and (zone-Ill) derived from natural sources:4 graded stone aggregate 20 mm nominal size derved from natural sources) |
| 13 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Mild steel and Medium Tensile steel bars |
| 14 | Centering and shuttering including strutting, propping etc. and removal of form for. 5.9.15 Small lintels not exceeding 1.5m clear sman,moulding as in cornices, winodw sills, strubg ciyrsesm vabdsm copings, bed plates, anchor blocks and the like. Please Enable Macros to View BoQ information |
