Tender For Construction Of Shilbarihat repair renovation Primary School Under Alipurdua -I Block Within Alipurduar Zilla Parishad.
Tender Value
11.51 Lakhs
Estimated cost
Bid Submission
04 Jul 2026
0 days left
EMD
23034
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalpaiguri → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Shilbarihat repair renovation Primary School Under Alipurdua -I Block Within Alipurduar Zilla Parishad.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.a) Depth of excavation not exceeding 1,500 mm. |
| 2 | (A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation withwater, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) |
| 3 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. |
| 4 | (II) Cement concrete with 30 mm down graded shingles excluding shuttering. N.B. Variety In ground floor(a) 1:3:6 proportion |
| 5 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) River Bazree . Ground floor |
| 6 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. Ground floor (JSW/JSPL/Shyam/SRMB/SSL/BMASL/Electrosteel) Ground floor |
| 7 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (f) 25 mm to 30 mm shuttering without staging in foundation |
| 8 | (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. GROUND FLOOR. |
| 9 | Brick work with 1st class bricks in cement mortar (1:6) (a) In foundation and plinth |
| 10 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. Ground floor: |
| 11 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:4 cement mortar (a) 20 mm thick plaster Ground floor |
| 12 | (ii) With 1:4 cement mortar (a) 15 mm thick plaster Ground floor |
| 13 | (ii) With 1:4 cement mortar (c) 10 mm thick plaster Ground floor |
| 14 | Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m. |
| 15 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. (ii) 25 mm. thick GROUND FLOOR : |
| 16 | 25mm thick damp proof course with cem concrete (1:1.5:3) |
| 17 | Labour for Chipping of concrete surface before taking upPlastering work. |
| 18 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).(d) Sal : Local. |
| 19 | Panel shutters of door and window, as per design (each panelconsisting of single plank without joint), including fitting andfixing the same in position but excluding the cost of hinge andother fittings. In ground floor.(ii) 40mm thick shutters with 19mm thick panel of size 30 to 45 cm.(a) ordinari teak wood |
| 20 | Supplying, fiiting, fixing Fan hook for ceiling with 1mtr long 16mm dia rod |
| 21 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (vi) 100mm. X 50mm. X 1.25mm |
| 22 | Iron socket bolt of approved quality fitted and fixed complete. (b) 100mm long x 10mm dia bolt. |
| 23 | Iron socket bolt of approved quality fitted and fixed complete. (b) 150mm long x 10mm dia bolt. |
| 24 | Iron hasp bolt of approved quality 300mm long |
| 25 | (b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 26 | (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering et |
| 27 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : a) On timber or plastered surface : With other than hi-gloss of approved quality-(iv) Two coats (with any shade except white) |
| 28 | on steel or other metal surface: with super gloss II) two coats |
| 29 | Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. Two Coats |
| 30 | (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (Add extra @ 1% for each addl. floor upto 4th floor and @ 1.25% for each addl. floor above 4th floor) (i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr |
| 31 | Supplying, fiiting, fixing stainless steel railling consist of 38mm dia and 900mm height verticle |
| 32 | ADD FOR ELECTRICAL WORKS |
| 33 | ADD S& P WORKS |
| 34 | GST @ 18% |
| 35 | Cess @ 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender