|
| 1 | Labour for side clearance and lay-out |
| 2 | Earth Work in Excavation in Foundation Trenches in all kinds of soil with all complete Job as per direction of E/I |
| 3 | Providing cleen course Sand filling in foundation trenches and plinth -do- do- all complete Job as per specification and direction of E/I (5.1.10) B.C.D. |
| 4 | Providing 75B one Brick flat soling joints filled with local sand -do- do- all complete Job as per specification and direction of E/I (5.6.3) B.C.D. |
| 5 | Providing P.C.C. M - 100 with nominal mix of (1:3:6) in foundation trenches -do- do- all Complete Job as per direction of E/I (5.3.1.4) |
| 6 | Providing P.C.C. M-150 with nominal mix of (1:2:4) in foundation with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening shuttering, mixing cement concrete in mixer, placing in position vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all comple as per building specificationand direction of E/I. |
| 7 | Providing designation 75B brick work in C.M. (1:6) in foundation & plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes & royalty all complete as per building specification & direction of E/I. |
| 8 | Earth filling in foundaion trenches and plinth in layers not exceding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I. (mode of measurement compacted volume)(5.1.7) |
| 9 | Providing 12 mm thick cement plaster (1:4) with approved quality of sand -do- do- all Complete Job as per building specification and direction of E/I (5.7.2) |
| 10 | Carriage of Materials :(i) Cement Av. Lead 7km |
| 11 | (ii)Sand Av. Lead 12 KmP |
| 12 | (iii)Stone Chips Av. Lead 10 KmP |
| 13 | (iv)Bricks Av. Lead 5 KmP |
| 14 | Earthwork in excavation in foundation trenches in ordinary soil (videclassification of soil item B) and disposal of excavated earth as obtained to a distance upto 50 M. including all lifts, levelling ,ramming the foundation trenches,removing roots of trees, shurbs all complete as per approved design,building specification anddirection of E/I. |
| 15 | Providing,coarse clean sand in filling in foundation trenches/in plinthincluding ramming & watering in layers not exceeding 150 mm thick with all leads and lifts including cost of all materials, labour, royalty,& taxes all complete as per building specification & direction of E/I.(mode of measurement compacted volume) |
| 16 | Providing designation 75 B one brick flat soling joints filled with localsand including cost of watering,taxes royalty all complete as per building specification anddirection of E/I. |
| 17 | Providing designation 75 B Brick work in CM(1:6) In foundation andplinth do-do-E/I |
| 18 | Providing P.C.C.M20 with nominal mix of (1:1.5:3) in foundation withapproved quality of stone metal grade-III (50 mm to25mm size)clean coarse sand of F.M. 2.5 to 3including screening,shuttering,mixing cement concrete in mixer and placing in position,vibrating,striking,curing taxes and royalty all complete. as per building specification and direction of E/I. |
| 19 | Providing tor steel reinforcement of 10mm, 12mm & 16mm dia bars as per approved deign and drawing as per building specification and direction of E/I (a) 10mm (TMT coil Fe 500) (only valid for TATA(Tucson), SAIL, JSPL, Elcetrosteel Ltd. Bokaro and Vizag(RINL) (b) 12mm (TMT coil Fe 500) (only valid for TATA(Tiscon), SAIL, JSPL, Elcetrosteel Ltd. Bokaro and Vizag(RINL) (c) 16mm (TMT coil Fe 500) (only valid for TATA(Tiscon), SAIL, JSPL, Elcetrosteel Ltd. Bokaro and Vizag(RINL) |
| 20 | Providing 12 mm thick cement plaster(1:4) with clean coarse sand ofFM1.5including screening,curing,with all leads and lifts of water,scaffolding,taxes and royalty all complete as per specification and direction of E/I. |
| 21 | Filling in foundation trenches and plinth in layers not exceeding 150 mm thick wall watered, rammed, fully compacted and -- do-- E/I |
| 22 | Supplying, fitting and fixing CPVC pipes, fittings, bib cocks confirmingrelevant IS specifications including cost of all materials, labours etc all complete job as perstandard specifications and direction of E/I. |
| 23 | Providing and fixing of male ended c.i body brass spindle valve and seat bib cock of approved quality with extra socket all cop as per specification and direction of E/I. |
| 24 | Sand (Lead 17Km.(P)) |
| 25 | Brick (Lead 8 Km.(P)) |
| 26 | Stone Chips (Lead 15 Km.(P)) |
| 27 | Cement + rod (Lead 10Km.(P)) |
| 28 | Cost of Drilind 200 mmx165mmx125 mtr.deep bore well in all kind of Soil and rock in rural area for instalation of pump set with Hydrolic DTH Rig machine all complete including all materials, tools,driling rig, air compressure and equipments as well as fule, lubricants and cost of transportation of rig machine annd other vehical up to Site.(a) From 0.00 M to 50.00 M below G.L. |
| 29 | (b) From 51.0 M to125.00 M |
| 30 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.200 mm nominal size dia |
| 31 | Development of tube well in accordance with IS : 2800 (part I) andIS: 11189, to establish maximum rate of usable water yield withoutsand content (beyond permissible limit), with required capacity aircompressor, running the compressor for required time till well isfully developed, measuring yield of well by \\"V\\" notch method or anyother approved method, measuring static level & draw down etc. bystep draw down method, collecting water samples & getting testedin approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessoriesetc., all as per requirement and direction of Engineer-in-charge |
| 32 | Supplying and commissionig of submersible pump set conforming to IS 8034 and motor conforming to IS 9283 should be suitable for various head and discharge with stainless steel pump soft and polypyenen -do-do- all complete job aas per specification and direction of E/I . 100 MM dia 1.5 HP Pump (sl. 139 M 1055, PG- 124 Part A) |
| 33 | providing and fixing M.S clamp of required dia to the top ofcasing/housing pipe of tubewell as per IS: 2800(part I) including necessary bolts & nuts of required size complete 200 mm clamp |
| 34 | Supplying fitting and fizing 3 crore 4 sqmm flat copper submemersible cable Finolex/Hevels make including all taxes royality etc. al complete job as per direction of E/I |
| 35 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittingswith one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.40mm nominal outer dia pipe |
| 36 | Supplying fitting of standard make starter pannel board with arrangement of aa necessary protection inlcuding all taxes royalty etc all complete job as per direction of E/I |
| 37 | Polythene water stoarage tank of ISI mark(e.g Sintex/sinter/Himgiri/Gangotri etc.) with cover and locking system |
| 38 | Singh Board and Photograph |
| 39 | Goods & Service Tax (G.S.T. 18%) |
| 40 | 1% Labour Cess Please Enable Macros to View BoQ information |
