|
| 1 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 4 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering --All work upto plinth level: 1:3:6 ( 1 Cement: 3 fine sand : 6 graded stone aggregate 20 mm nominal size) |
| 6 | Reinforced cement concrete work in beams, suspendedfloors, roofs having slope upto 15° landings, balconies,shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases upto floor five levelexcluding the cost of centring, shuttering, finishing and reinforcement 1:2:4 ( 1 Cement: 2 fine sand : 4 graded stone aggregate 20 mm nominal size)for footings bases for columns- |
| 7 | Centering shuttering including struttings,propping etc and removal of form work for: Foundations, footings, bases for columns etc. for mass concrete with timber plank |
| 8 | Reinforcement for RCC work including straightening ,cutting ,bending,placing in position and binding all complete upto plinth level Thermo Mechanically treated bars of grade Fe-500D or More |
| 9 | First class brick work in foundation and plinth includi ng cost of all materials as required complete: In cement mortar 1 :4 ( 1 cement : 4 fine sand ) |
| 10 | Half brick masonry with first class bricks in superstructure upto floor five level including cost of all materials as required complete:- In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 11 | 12 mm cement plaster of mixCement mortar l :4 ( 1 cement : 4 fine sand) |
| 12 | Neat cement punning. |
| 13 | Providing and fixing G.I. pipes medim class as per IS : 1239 with latest amendment complete with G.I. fittings including trenching and refilling, cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer - in - charge.external work. |
| 14 | 150 mm dia nominal bore(medium) |
| 15 | 125 mm dia nominal bore(medium) |
| 16 | Providing and fixing G.I. Bend /elbow in the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. |
| 17 | 125 mm dia |
| 18 | 150 mm dia |
| 19 | Labour charge for laying of G.I pipe conforming IS 1161,3589 & 1239 including fitting fixing complete as per direction of Engineer-in- Charge. |
| 20 | 150 mm dia nominal bore(medium) |
| 21 | 125 mm dia nominal bore(medium) |
| 22 | Providing & fitting fixing M.S flange (10mm thick) at site of work of approved quality. |
| 23 | 150 mm dia |
| 24 | 125 mm dia |
| 25 | Providing & fitting fixing Rubber flange washer 6 mm thick at site of work of approved quality. |
| 26 | 150 mm dia |
| 27 | 125mm dia |
| 28 | Providing and fixing MS bolts including nuts and washers complete as per standard design:- |
| 29 | Demolishing cement concrete manually / by mechanical means including disposal of material with all lifts and upto 50 m lead etc. complete as per direction of the Engineer- in-charge:- a) Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) For Dalucherra Diversion Scheme's walkway |
| 30 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level: 1:3:6 ( 1 Cement: 3 fine sand : 6 graded stone aggregate 20 mm nominal size) |
| 31 | Centering shuttering including struttings, propping etc. and removal of form work for: Foundations, footings, bases for columns etc. |
| 32 | Providing and fixing hand rail using structural steel etc. of approved size by welding etc. to steel ladder railing, balcony railing and staircase railing etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer complete as required:- G.I.pipes ( 40 mm dia. Medium weight ) |
| 33 | Providing and fixing G.I. pipes of medium class as per IS : 1239 with latest amendment complete with G.I. fittings and clamps, including cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer - in -charge.Internal work - Exposed on wall. 40 mm dia. nominal bore |
| 34 | Hiring charge of welding set of single phase with operating staff and carrying upto the site of work including loading and unloading (both way) complete as per direction of Engineer-in-charge. |
| 35 | To open out existing old rubber seal and covering plate from steel gate by cutting nut and bolts where necessary as per direction of the engineer in charge. |
| 36 | Supplying and fitting fixing at site rubber seal for steel gate and fixing them with new bolts and nuts and washer and pouching necessary tubes in rubber seal with new covering plate. The new rubber seal are to be proper shape and size, hard were staging and scaffolding where necessary as per diredtion of the Engg-in-Charge. |
| 37 | Opening and overhauling of old roller steel gate which are trust and make in working properlly by greasing and fitting fixing with tools and tackles as per direction of the Engineer-in-charge. |
| 38 | Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63mm thick with zinc coating not less than 275gm/m2 |
| 39 | Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63mm thick with zinc coating not less than 275gm/m2 |
| 40 | Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer] : New work (two or more coats) including a coat of appropriate steel primer but excluding a coat of mordant solution |
| 41 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]: Two or more coats on new work over an under coat of suitable shade with ordinary paint (primer) of approved brand and manufacture Please Enable Macros to View BoQ information |
