|
| 1 | SUB-HEAD 1-- SUPPLY & LAYING OF CABLES Supply of 1.1 kV Gr. 3.5 Core XLPE Insulated & Sheathed Armoured Aluminium Conductor cable [Make Gloster/Polycab/ Havells] of following sizes ---- |
| 2 | 120 Sq. mm (NS) [From Old Sub-Station Main Panel to Main Gate of Emergency Main switch ] |
| 3 | Laying of the120 Sq. mm cable in the UG trench of 460 mm wide x 760 mm average depth with brick protection on the top of the cable with 8 (eight) nos. bricks per Mtr. including filling the space between the bricks, cable, and trench with shifted soil, levelling up and restoring the surface duly rammed. [1(a)/F-2]. |
| 4 | Laying of one cable above 150 sqmm and upto 300 sqmm through existing covered masonry trench incl. taking out RC covers, setting them in order, mending good the damages filling the trench with fine dry sand incl. supplying sand [ F3 / 4(a)] |
| 5 | Laying only Cable above 4 core 50 sq. mm but not exceeding 4 core 400 sq. mm through existing RCC/ Hume/GI Pipe/open masonry trench. [3 (b)/F-2 ] |
| 6 | Laying of following sizes 4 core Armoured/Aluminum conductor cable on wall/surface including S & F MS clamps with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting |
| 7 | 90-150 / 185 sq. mm [ F 1 / 2 (e)] |
| 8 | Providing on hire main wiring with 1.1 KV grade Aluminium Conductor PVC / XLPE armoured cable of following sizes including laying in trench (at least 230 mm below ground) including dismantling the same and mending good the damages. [Page-5/5 (f),(g),(h) ] (a) 4 Core 25 Sq. mm. PVC / A Cable. |
| 9 | (i) Up to 3 days. |
| 10 | Dismantling the existing electrical accessories like all kinds of old cable , main switches, net guard, , Bus bar, , different sizes cable, gland, nail, fastener, damaged panel, incoming & outgoing cable etc. at working site and deposit the dismantles items at section store with mending good the damages as per direction by 2 nos. un skilled & 2 nos. semi-skilled labour and connection temporary arrangement by Lt Cable . (NS) |
| 11 | Laying of following sizes 4 core Armoured/Aluminum conductor cable as below after cutting floor/pavement/wall and making holes incl. embedding the cables at an average depth as below and nending good the damages to original finish incl. removing the rubbish |
| 12 | 185 sq. mm at an average depth of 100 mm in floor/pavement/wall etc. [ F 3 / 5 (iii)] |
| 13 | Supplying and fixing compression type gland complete with brass gland , brass ring & rubber ring for dust & moisture proof entry of XLPE / PVC armoured cables as below Dowels make gland as per GS |
| 14 | 4 Core 120 Sq.mm [7(c)/F4 ] |
| 15 | Finishing of the XLPE / PVC insulated armoured cable ends by crimping method incl. supplying & fixing solder less socket ( DOWELS ) make , tapes , anticorrosive paste & jointing materials as per GS. |
| 16 | 4 Core120 sq.mm [ 8(b)/ F5 ] |
| 17 | Supplying & fixing medium gauge GI pipe (ISI - Medium) protection with necessary fittings and jointing materials as required . |
| 18 | 50 mm dia [F6 / 11, d] Please Enable Macros to View BoQ information |
