|
| 1 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. |
| 2 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 3 | Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: Note:- Aluminium hinges shall not be used in wooden shutters , Stainless steel hinges shall be preferred |
| 4 | a) 100x63x3.2 mm |
| 5 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 6 | a) 300x10 mm |
| 7 | b) 150x10 mm |
| 8 | Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 9 | a) 125 mm |
| 10 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 11 | a) Single rubber stopper |
| 12 | Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer-in-charge. |
| 13 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 14 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows all complete with : |
| 15 | a) 4.0 mm thick glass panes. |
| 16 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 17 | a) Two or more coats on new work. |
| 18 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 19 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. |
| 20 | a) One coat. |
| 21 | b) Two coats. |
| 22 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. |
| 23 | a) With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. |
| 24 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 25 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 26 | a) One or more coats on old work. |
| 27 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge. |
| 28 | a) With cement mortar 1:4 (1 cement : 4 fine sand). |
| 29 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 30 | a) For fixed portion (i) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 31 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 32 | a) With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 33 | Removing aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 34 | Re-fixing the aluminum partition comprising available aluminium members laminated board, glass panes, doors of different sizes including cutting the aluminium members and providing new nails & screws etc alongwith aluminium snap beading as required in different locations all complete as per the direction of the Engineer in charge (Cost of aluminium beadings to be paid for separetaly) |
| 35 | P/F PVC sheet flooring and skirting of approved company like Krishna Vinyl, Wonder Floor etc orequivalent in approved pattern on a smooth and damp proof base using rubber adhesive of approved quality and manufacturer like Dunlop-S-758,Fevicol SR-998 or equivalent, including rolling with light wooden roller weighing about 5 kg. including repairing of damaged floor where ever necessary all complete as per direction of Engineer - in- Charge. (a) 1.50 mm thick sheet |
| 36 | Removal of old damaged PVC/Woolen carpet from floor including removal of old adhesive using thinners and permitted chemicals, stacking of serviceable materials and disposal of unserviceable materials etc. complete as per direction of Engineer-in-charge. |
| 37 | Carrying out repairs to the existing M.S windows by servicing/replacing the hinges including providing 2 nos of MS handles and 2 nos of M.S telescopic stays and ensuring smooth functioning including the cost of welding and other incidental material and labour required. etc complete as per the directions of the Engineer in Charge. |
| 38 | Supply of helpers for carrying out works like shifting of office furnitures from the place of work to a designated place and replacing the same to its original position or as directed. The job is to be carried out with utmost care so as to Not damage the office furniture. |
| 39 | Transportation of partition material including aluminium sections, prelaminated particle boards, glass,, cleats angles, snap beading, rubber gasket etc complete from Telephone Exchange Forest Colony, Shillong to OCB Telephone Exchange Building, Shillong including labour for loading and unloading etc compete as directed by the Engineer in charge. |
| 40 | Providing and fixing single line scaffolding system upto the required height made with bamboo's of 75 to 100 mm dia, 1.2 m centre to centre, horizontal & vertical- joining with ropes including providing working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. Please Enable Macros to View BoQ information |
