|
| 1 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge: In cement mortar (DSR No. 15.7.4) |
| 2 | Removing mortar from brick and cleaning brick including stacking within a lead of 50 m (stacks of cleaned bricks shall be be measured) (from brick work in mud mortar (DSR No. 15.8.1) |
| 3 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. (DSR No. 15.25) |
| 4 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead: For thickness of tiles 10 mm to 25 mm (DSR No. 1523.1) |
| 5 | Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. (DSR No. 15.26) |
| 6 | Demolishing mud phaska in terracing and disposal of material within 50 metres lead. (DSR No. 15.27) |
| 7 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge: Nominal concrete 1:4:8 or leaner mix (including equivalent design mix) (DSR No. 15.2.2) |
| 8 | Removing mortar from bricks and cleaning tiles including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured) :From brick work in mud mortar (NSI based DSR No. 15.8.1) |
| 9 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. (DSR No. 15.3) |
| 10 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. (DSR No. 15.60) |
| 11 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m: All kinds of soil. (DSR No. 2.8.1) |
| 12 | Excavating trenches by mechanical/manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :All kinds of soil: Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia (DSR No. 2.10.1.2) |
| 13 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) (DSR No. 4.1.8) |
| 14 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR No. 4.1.3) |
| 15 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR No. 6.1.2) |
| 16 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and for all lift (DSR No. 2.25) |
| 17 | Providing and laying damp-proof course 50mm thick with cement concere 1:2:4 (1 cement :2 coarse sand (zone-III): derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources (DSR No. 4.11) |
| 18 | Providing and applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. (DSR No. 4.13) |
| 19 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand) (DSR No. 6.4.1) |
| 20 | Half Brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level: cement mortar 1:4 (1 cement : 4 coarse sand) (DSR No. 6.13.2) |
| 21 | Extra for providing and placing in position 2 Nos 6 mm dia M.S bars at every thrid course of half brick mansory (DSR No. 6.15) |
| 22 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) (DSR No. 13.4.1) |
| 23 | Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand ) flush /ruled /struck or weathered pointing (DSR No. 13.31.1) |
| 24 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials including malba all complete as per directions of Engineer-in-Charge. (DSR No. 14.82) |
| 25 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. (DSR No. 15.52) |
| 26 | Dismantling Wash hand basin,Urinals with existing CI brackets & fitting of all sizes including handing over the material to department all complete as per directions of Engineer-in-Charge.(Extra Item) (NSI) |
| 27 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge: 15 mm to 40 mm nominal bore (DSR No. 15.44.1) |
| 28 | Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in- charge (DSR No. 14.79) |
| 29 | Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks (DSR No. 18.76.1) |
| 30 | Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc.with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. (DSR No. 18.77) |
| 31 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 75 mm outlet : Sand Cast Iron S&S as per IS- 1729 (DSR No. 17.60.2.2) |
| 32 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, including making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : (DSR No. 18.11) |
| 33 | 15 mm dia nominal bore (DSR No. 18.11.1) |
| 34 | 20 mm dia nominal bore (DSR No. 18.11.2) |
| 35 | 25 mm dia nominal bore (NSI) |
| 36 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) (DSR No. 18.46) |
| 37 | 15 mm nominal bore (DSR No. 18.46.1) |
| 38 | 20 mm nominal bore (DSR No. 18.46.2) |
| 39 | 25 mm nominal bore (DSR No. 18.46.3) |
| 40 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : (DSR No. 18.17) |
| 41 | 20 mm nominal bore (DSR No. 18.17.1A) |
| 42 | 25 mm nominal bore (DSR No. 18.17.1) |
| 43 | Providing and fixing ball valve (brass) ISI marked of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal bore (DSR No. 18.18.2) |
| 44 | Providing and fixing of C.P jali with cut including fixing with white cement etc.complete in all respects Make: VIKING (NSI) |
| 45 | Providing and fixing of C.P jali without cut including fixing with white cement etc.complete in all respects Make: VIKING (NSI) |
| 46 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 : 15mm nominal bore (DSR No. 18.53.1) |
| 47 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (DSR No. 8.31) |
| 48 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. (DSR No. 11.56.1) |
| 49 | Providing and fixing of coloured ceramic (tactile) tile, ground surface indicators of size 300mmx300mm of approved make for guiding/direction /warning to the visually impaired visitor, in the centre/ side of the pedestrian/ approach pathway as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles as per design/ specification and guidelines complete in all respects to the entire satisfaction of Engineer-in-charge Note:- the Tile shall be premium quality (1 quality) of reputed manufactured like NITCO/KAJARIA SOMANI/ ORIENT/ JONHONSONS or equivalent in respect of quality & price. (NSI) |
| 50 | Making nosing/moulding on edges of granite marble whereever required as per specification of the EIC (NSI) |
| 51 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. (DSR No. 8.5) |
| 52 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (DSR No. 5.3) |
| 53 | Centering and shuttering including strutting, propping etc. and removal of form for : (DSR No. 5.9) |
| 54 | Suspended floors, roofs, landings, balconies and access platform (DSR No. 5.9.3) |
| 55 | Shelves (Cast in situ) (DSR No. 5.9.4) |
| 56 | Lintels, beams, plinth beams, girders, bressumers and cantilevers (DSR No. 5.9.5) |
| 57 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level: Thermo-Mechanically Treated bars of grade Fe-500D or more. (DSR No. 5.22.6) |
| 58 | 10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @ 35 kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow dung) and covered with flat tile bricks, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat: With common burnt clay F.P.S.(non modular) brick tile of class designation 10 (DSR No. 12.16.1) |
| 59 | Painting top of roofs with bitumen of approved quality @ 17kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil : With residual type petroleum bitumen of grade VG -10. (DSR No. 12.15.1) |
| 60 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : n 75x75 mm deep chase (DSR No. 12.21.1) |
| 61 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. (DSR No. 12.22) |
| 62 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @0.90 litre/10 sqm) (DSR No. 13.47.1) |
| 63 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (DSR No. 13.80) |
| 64 | Distempering with Ist quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour: new York (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre (DSR No. 13.41.1) |
| 65 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) excluding the cost of C.I. cover with frame (light duty) 455x610 mm internal dimensions, , R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 Fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (DSR No. 19.30.3.1) |
| 66 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality: L D- 2.5 : Rectangular shape 600x450 mm internal dimensions (DSR No. 19.19.1.1) |
| 67 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete: 100 mm diameter (DSR No. 19.1.1) |
| 68 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 100 mm diameter S.W. Pipe (DSR No. 19.2.1) |
| 69 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type: With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (DSR No. 19.4.1.1) |
| 70 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 100 mm to 250 mm dia meter (DSR No. 19.21.1) |
| 71 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below (DSR No. 15.12) |
| 72 | Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer -in- charge. (DSR No. 9.141) |
| 73 | 35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm ofcross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer's specification and direction of Engineer-in-charge: Decorative finish (wood grained finish) (DSR No. 9.142.2) |
| 74 | Providing and fixing 4mm thick glass panes with putty and nails with EPDM rubber / neoprene gasket etc. wherever required complete in all respect to the entire satisfaction of EIC of reputed make s.a Modi float/saint gobain (NSI) |
| 75 | Providing and fixing aluminium horizontal pull bar at least 600 mm long on the inside door located so that it is 130 mm from the hinged side of the door and at a height of 1000 mm, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. (NSI) |
| 76 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200x10 mm (DSR No. 9.97.3) |
| 77 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125mm (DSR No. 9.100.1) |
| 78 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm (DSR No. 9.96.1) |
| 79 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete: Twin rubber stopper (DSR No. 9.101.2) |
| 80 | Providing and fixing grabe rail of stainless steel pipe 1.25\\" and fitting of grade AISI 304 as per JIS standard 3448 including fitting and fixing of pipe with clamps at 1.00 m spacing including cutting and making good the walls complete as per direction of Engineer-in-charge. (NSI) |
| 81 | Providing and fixing grabe rail of stainless steel pipe 2\\" and fitting of grade AISI 304 as per JIS standard 3448 including cutting , welding and fixing in cement concrete as per direction of Engineer-in-charge. (NSI) |
| 82 | Providing and fixing wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:required complete in all respects as perentire satisfaction of EIC: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap (DSR No. 17.7.4) |
| 83 | Providing and fixing of Jaguar Make Prismatic pillar cock for under counter wash basin complete in all respects as perentire satisfaction of EIC (NSI) |
| 84 | Providing and fixing C.P. Brass angular stop cock of 15 mm nominal bore (NSI) |
| 85 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm including cutting and making good the walls and floors wherever required complete in all respects as perentire satisfaction of EIC: Single half stall urinal (NSI based on DSR No. 17.5.1) |
| 86 | Providing and fixing of Jaguar Make autoclosing Urinal angle valve for half stall urinal including the cost of CP connection & spreader etc. complete in all respects as perentire satisfaction of EIC (NSI) |
| 87 | providing anf fixing 8 mm dia C.P /S.S Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C of quality and make as approved by Engineer-in-charge (DSR No. 17.16A) |
| 88 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (DSR No. 17.31) |
| 89 | Providing and fixing urinal partition 10mm thick High Stainless Steel of approved make and superior quality of size 1.5 x 2.75 fixed in postion with clams holding the Steel Partition All exposed edges to be grinded with smooth finish to the entire satification of engineer-in-charge including carriage of material to site of work. to the entire satification of engineer-in-charge including carriage of material to site of work. [ Fixed on slopping back wall before fixing ceramic tiles] (NSI) |
| 90 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. (DSR No. 17.22A) |
| 91 | Providing and Fixing C.P. brass bib cock of approved quality conforming IS:8931: 15mm nominal bore (DSR No. 18.49.1) |
| 92 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. (DSR No. 18.53A) |
| 93 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (DSR No. 17.1.1) |
| 94 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid (DSR No.17.2.1) |
| 95 | Providing and fixing to the inlet mouth of rain water pipe cast iron gratting 15cm diameter and weighing not less then 440 gram. (DSR No. 12.44) |
| 96 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank: (DSR No. 18.48) |
| 97 | Making connection of T.T. water line with existing HDPE line with suitable clamp duly welded by suitable socket i/d excavation dewatering, filling back, dressing complete in all respects as per entire satisfaction of EIC. (Size 25mm pipe) (NSI) |
| 98 | Providing and fixing of size 25mm HDPE pipe including specials (bends, tees, endcaps etc.) as per IS 4984-2016 PE-100 (PN-4 kg/ cm2) using electrofusion method for jointing of pipes complete in all respects as per stastifaction of the Engineer in Charge. (Make:- Reliance/Jain/Wavin (Duraline)/Aliaxis (Ashirvad)/ Supreme) (NSI) |
| 99 | Providing and fixing water meter cover made out of MS angle frame 25mmx25mmxshutter 20mmx20mmx5mm MS sheet 18 gauge with locking arrangement primer painting complete in all respects. (NSI) |
| 100 | Providing and installation of superior quality heavy duty ISI marked sanitary napkin vending machines and Incinerators with Sanitary Napkin pad (1 Box = 200 Pads ). The cost include basic cost of equipment, taxes, delivery charges, training charges & warranty of 12 months. (NSI) |
| 101 | Providing and fixing unplasticised PVC connection pipe with barss union : 30 cm length: 15 mm nominal bore (DSR No. 18.21.1.1) |
| 102 | 45 cm length: 15 mm nominal bore (DSR No. 18.21.2.1) |
| 103 | Providing and fixing uplasticised PVC connection pipe with brass unions : 61 cm length : 15 mm nominal bore: (NSI) |
| 104 | 122 cm length: 15 mm nominal bore (NSI) |
| 105 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete: Semi rigid pipe : 32 mm dia (DSR No. 17.28.1.1) |
| 106 | Providing and fixing PTMT liquid soap container 109 mm wide, 125mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. (DSR No. 17.71) |
| 107 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour : 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms (DSR No. 17.73) |
| 108 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter (DSR No. 12.41.2) |
| 109 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion: Bend 87.5° : 110 mm bend (DSR No. 12.42.5.2) |
| 110 | Supplying & placing Garbage large dust bin (Plastic ) 48 liter Make: Diplast/Aristo/Ceilo (NSI) |
| 111 | Supplying and placing Plastic Mug (1.5 litre) Make: Playset/Milton/Ceilo/Nayasa. (NSI) |
| 112 | Providing & fixing CP - Soap Holder size (138x102x75mm) complete in all respects to the entire satisfaction of EIC. (NSI) |
| 113 | Providing and Fixing Toilet paper holder: C.P. Brass (DSR No. 17.34.1) |
| 114 | Providing and fixing acralic sheet with silver remark engraving plate 12\\"x18\\" in postion at required place to the entire satification of Engineer-in-charge. (NSI) |
| 115 | Providing and fixing Sun board printing with lamination on 5mm sun board of size 6' x 2' to be fixed at the height of 12' from NGL, leveled in postion to the entire satification of Engineer-in-charge (NSI) |
| 116 | Providing and fixing acralic sheet with silver remark engraving plate 12\\"x12\\" in postion at required place to the entire satification of Engineer-in-charge. (NSI) |
| 117 | Providing and fixing Sun board printing with lamination on 5mm sun board of size 24\\" x 30\\" to be fixed at the height of 12' from NGL, leveled in postion to the entire satification of Engineer-in-charge (NSI) |
| 118 | Providing and fixing acrylic Multilingual Braille (Raised dots) signboards ( DOOR SIGN BOARDS) at Size 6”X9”or room tiles, designated as per the drawing issued and having 3mm thick blue acrylic base plate with Upper Case sun serif words made of white acrylic non glare cut out letters of height 15mm raised not less than 0.8mm above base plate and the equivalent word’s written in Hindi with Devanagari non glare acrylic letters of height 1mm raised not less than 0.8mm above base plate , Grade 2/Grade 1 Braille to be integral with the sign face and be raised 0.5mm above base manufacturers specifications on the wall adjoining the respective room door at a height of 1200mm from FFL complete as per design/specifications and guidelines as per entire satisfaction of the Engineer -in -charge (NSI) |
| 119 | Providing and fixing of SS non glare Multilingual Braille (Raised dots) ENTRANCE SIGNAGE ( Size 1ftX1ft)as per the approved design and make indicating the name building having 1.2mm thich SS non glare blue colored base plate with the ‘Universal accessibility symbol’ and upper case sans serif words height of 15mm engraved on it along with the equivalent words written in Hindi using Devnagri script of height 15mm in white color grade 2/grade 1 Braille to be etched/engraved and be raised 0.5 mm above base plate. The signage to be installed at the specified location on the compound wall near the site entrance gate installed at a height of 1200mm from the finished ground/floor level, using the necessary hardware specified by the manufacturer and to be installed complete as per design/specifications and guidelines as per the entire satisfaction of the Engineer -in -charge (NSI) |
| 120 | Providing and fixing a disabled person toilet alarm kit (comprising an over-the-door/wall light and sounder, one toilet reset switch, ceiling/wall pull unit with pull cord, and disabled WC sticker). The system operates by simply pulling the cord to activate the sound alarm and over-door light outside the toilet (pull cord length more than 275 cm). The alarm system should consist of a red pull cord with red bangles of 50 mm diameter, with one bangles at a height between 800 mm and 1000 mm, and the other at 100 mm above floor level. Complete set in all respects, as per the direction of the Engineer-in-charge (NSI) |
| 121 | Providing and fixiing of Emergency distress button (waterproof) inside barrier-free toilet, along with a siren sound louder than 120 dBA, and blue/red strobe flashing light. Rated voltage/current: 12VDC/120mA, power adapter input voltage: 110-120 VAC, output voltage: 12 VDC/3A (36W) Complete set in all respects, as per the direction of the Engineer-in-charge (NSI) |
| 122 | Providing and fixing of acrylic multilingual Braille (raised dots) DIRECTIONAL SIGNBOARDS of size 6”X 9” designed as per accessibility standard and having 3mm thick acrylic base plate with upper case san serif words made with white acrylic non flare cut out letters of height 15mm raised not less than 0.8mmabove the base written in Hindi with Devanagri non flare acrylic letter of height 15mm raised not less than 0.8mm above base plate and having a non glare acrylic cut arrow pointing in the required direction. Each signboard to be fixed as per manufactures specification on the wall at the approved location and at a height of 1200mm from FFL complete as per design/specification and guidelines as per entire satisfaction of the Engineer –in- charge (NSI) |
| 123 | Providing and fixing of murals with the given specifications:- Base: 12mm thickness bison panel board (NCL Group Brand), Board and Mural Size: 8' x 4'. Primer:- Exterior Apex Base Primer (2 coats) on board both sides, Paints:- Apex exterior whether proof acrylic paints (2 coats).Applied in various colors as per approved graphics and design on front side and back side of board painted with plain duco paint, Frame:- Aluminium corner 1\\" x 1.5\\" thickness fixed around the edges. Fixing/transporation:- A. Fixing provisions (10mm holes) to be given at backside of boards for fasteners to be fixed on walls. B. Onsite fixing with 10mm 4\\" fastners on the wall. (NSI) |
| 124 | Designing, providing and fixing of aluminium composite glowing sign board of clear size 5'x1-3' after moulding 3\\" both side made out of size 5'x1'-9\\" sheet having thickness of 3mm, CNC Router Cut Letter Acrylic sheet 2.8mm with CNC laser cut, MS SQ pipe 42mm i/d having 1mm thick, 3mm thick sun board box for housing glowing LEDs module, backside board covered with 2mm ACP sheet, LED Module and water proof power supplies, installation at specific height by fixing with 2 No. L-type brackets and 2 No. flat brackets on wall i/c cost of anchor bolts and electrical wiring with making connection with switch boards at site including loading, unloading, carriage & labour charges complete in all respects. (NSI) |
| 125 | Designing, providing and fixing of aluminium composite glowing sign board of clear size ^'-1'-6\\" after moulding 3\\" both side made out of size 6'x2\\" thickness of 3mm, CNC Router Cut Letter Acrylic sheet 2.8mm with CNC laser cut, MS SQ pipe 42mm i/d having 1mm thick, 3mm thick sun board box for housing glowing LEDs moldule, backside board covered with 2mm ACP sheet, LED Module and water proof power supplies, installation at specific height by fixing with 2 No. L-type brackets and 2 No. flat brackets on wall i/c cost of anchor bolts and electrical wiring with making connection with switch board at site including loading, unloading, carriage & labour charges complete in all respects. (NSI) |
| 126 | Providing and fixing of Exhaust fan Make: crompton/Havells complete in all respects including the cost of wiring and switches etc. Size 12\\" double ball bearing. (NSI) |
| 127 | Providing and fixing the louvers complete with frame for exhaust fan of 12\\" diameter. (NSI) |
| 128 | Providing and fixing of ceiling fan of size 48\\" Make : Crompton/Havells/Orient/Usha/Khaitan. (NSI) |
| 129 | P/F of LED Tubelights complete set type 18W ,L=4ft, Make : Crompton/Havells /philips (NSI) |
| 130 | P/F of 1.5mm single core PVC insulated copper cable for wiring at Toilet BlockMake : finolex /ploycab / Havells (NSI) |
| 131 | P/F of 0.75 mm single core PVC insulated copper cable for earthing at Toilet Block, Make : Havells/ Finolex/ Polycab. (NSI) |
| 132 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (Elec DSR No. 1.21) |
| 133 | 20mm (Elec DSR No. 1.21.2 E) |
| 134 | 25 mm (Elec DSR No. 1.21.2 E) |
| 135 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. make:-Havells/ Anchor/ SSK/ Gold Medal (Elec DSR No. 1.23) |
| 136 | 3 pin 15/6 A switch (Elec DSR No. 1.23.3 E) |
| 137 | 6 pin 15/6 A socket outlet (Elec DSR No. 1.23.5 E) |
| 138 | Providing and fixing of 5Amp modular swiches with electricial connection Make:-Anchor, havells, goldmedal,SSK, (NSI) |
| 139 | Providing and fixing of 3 pin 5Amp modular Sockets with electricial connection Make:-Anchor, havells, goldmedal,SSK, (NSI) |
| 140 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc.as required. (Elec DSR No. 1.27) |
| 141 | 8 Module (125mmX125mm) (Elec DSR No. 1.27.5 E) |
| 142 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. (Elec DSR No. 1.22 E) |
| 143 | 100 mm X 100 mm X 60 mm deep (Elec DSR No. 1.22.2 E) |
| 144 | 150 mm X 150 mm X 60 mm deep (Elec DSR No. 1.22.4E) |
| 145 | 200 mm X 125 mm X 60 mm deep (Elec DSR No. 1.22.6 E) |
| 146 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. as required : 110 mm (DSR No. 12.43.2) |
| 147 | PVC pipes (working pressure 6 kg / cm²) Single socketed pipe (NSI) |
| 148 | 75 mm dia. (NSI) |
| 149 | 110 mm dia (NSI) |
| 150 | Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with modular swith, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required: Group B (Elect DSR No. 1.10.2) |
| 151 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. (Elect DSR No. 1.12) |
| 152 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Elect DSR No. 2.10) |
| 153 | single Pole (Elect DSR No. 2.10.1) |
| 154 | Double Pole (Elect DSR No. 2.10.3) |
| 155 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way , Double door (Elect DSR No. 2.3.3) |
| 156 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement andwatering pipe etc. (but without charcoal/ coke and salt ) as required. (Elect DSR No. 5.1) |
| 157 | Supplying and fixing following way, single pole and netural, sheet steel, MCB distribution board consurmer unit 240 volts, on surface/reess, complete with timed copper bus bar neutral bus bar, earth bus bar, hinged front acrylic cover for the MCB knobs, detachable gland plate, interconnections, phosphatized and powder painted including earthling etc. as required (But without MC/ PCCB/Isolator) 2*4 way (Elect DSR No. 2.7.4) |
| 158 | Making suitable size wall niche inimum 2'x3'-0'' including cement plastering from inside of niche, wooden plank for sheet metal, iron clad switch gear includng the cost of PVC shutter with locking arrangement, Chowkat complete in all respects (NSI) |
| 159 | Providing and fixing 50 watt LED flood light with bracket out side on the wall complete in all respects.Make: Crompton/Havells/Phillips (NSI) |
| 160 | Providing and fixing of wall hang Hand Drier heavy duty ISI marked of reputed make (NSI) |
| 161 | Providing and fixing of wall hang tissue paper dispensers of superior quality/approved make in washbasin area as per direction of EIC (NSI) |
| 162 | Providing and fixing of aluminum cable10 mm 2 core of make Shalimar /havells complete in all respects. (NSI) |
| 163 | Providing and Fixing of Customer feedback device of superior quality/approved make having 3 nos. push buttons , metal body,wall mounted,mahine use for givng rating on public toilet including terminal box, electrical parts,wiring complete in all respects. (NSI) |
| 164 | Providing and fixing of invertor 875 VA/700 Watt, input and output voltage 220 VAC, 50 Hz, 1 Phase, Battery 150 AH capacity of Make: Exide/ Luminious/ Amaron/Microtek solar panel including cost of wiring, transportation charges and installation charges and installation charges etc. complete in all respects.(NSI) |
| 165 | Providing and placing PVC mat 15mm thick (NSI) |
| 166 | Providing and placing PVC POT (Gamla) Size 18\\", 12\\" dia Green in colour including decorative plant. (NSI) |
| 167 | Less credit against old material recovery at site as per following: (NSI) |
| 168 | Credit against old G.I Pipes/MS scrap/MS bar |
| 169 | Credit for Brick Bat |
| 170 | Credit for Old tile |
| 171 | Credit for Old Brick |
| 172 | Credit for door/window |
| 173 | Note: The old material s.a. PVC tank etc. recovered from site for which credit has not been considered above shall be returned to the department. Please Enable Macros to View BoQ information |
