|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate SingleWindow INR Only INR Select, Excess (+), Less (-) CIL Hide Select GST Registered Bidder under regular scheme GST Registered Bidder under composition scheme GST Unregistered Bidder Select Not Applicable Tender Inviting Authority: Staff Officer (Civil), CWS Tadali, Western Coalfields Limited Name of work: Renovation, modification, development, and beautification of main entrance gate, space outside front compound wall, security office, and allied works at Central Workshop under CWS TadaliNIT no.: CWTD-CIV-E-05-2026-27, S. No. 1 . Category of services (To be selected by department) Category of bidder(To be selected by bidder) To be entered by department ITC Available Works Contract Bidder's Status (Mandatory) Rate of GST (in %) Total GST (in ₹) GST to be paid by bidder (in ₹) GST to be paid by WCL (in ₹) Name of the Bidder/ Bidding Firm / Company : Select 18.0 0.0 0.0 0.0 PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the bidder name and values only.) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # S. No. Item Description(Item no. 2 to 11.12 & 12.02 to 18 are Non-SOR items; andItem no. 12.01 is based on CPWD DSR for Horticulture & Landscaping-2025 item) Item Code / Make Quantity Units Estimated Rate inRs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency Basic rate in figures to be entered by the bidder inRs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category Total amount excluding GST inRs. P TOTAL AMOUNT With Taxes Total amount in words |
| 2 | SCHEDULE-B (Items from/ based on Standard Schedule of Rates):Item no. 1.01 to 1.81 |
| 3 | Cutting/ uprooting & clearing rank vegetation, grass, bushes, shrubs, brush-wood, trees and saplings of girth up to 30 cm (measured at a height of 1 mtr above ground level), removal of stumps of trees cut/ fell earlier, and stacking of serviceable & unserviceable materials at separate designated places within a lead of 100 metres, as per instructions of WCL. Wherever the work is not feasible through mechanical means, or working by mechanical means is likely to cause damages to nearby buildings, structures, boundary walls, fencings, pipelines, cables, etc., the work is to be done through manual means. Each worker must be equipped with the required safety gear/ accessories (gum-boots, hand gloves, face masks (if required), raincoats (if required as per weather), etc.). The cost is including all leads & lifts; cost of hydraulic excavator/ dozer, other equipment/ tools (gardening scissors, axe, phawda, ghamela, etc.), operators & other workers, fuel, carriage/ transportation cost, & safety gear/ accessories for the workers, etc. all complete. |
| 4 | Trimming/ pruning branches of some trees through manual means using chain-saw machine, and stacking of serviceable & unserviceable materials at separate designated places within a distance of 100 metres. The contractor is required to provide one suitable & experienced wood-cutter person per day, as & when directed, for this job. Each worker must be equipped with the required safety gear/ accessories (helmet, safety shoes, safety harness, hand gloves, etc.). The cost is inclusive of labour, equipment/ tools (chain-saw machine, ladder, etc.), safety gear/ accessories for the workers, all leads & lifts, etc. all complete. If chain-saw machine deployed is not in working condition, then no measurement shall be made for item. |
| 5 | Providing & fixing Aluminium Composite Panel (ACP) inner-cutting acrylic sign board with the following specifications:(i) Aluminium Composite Panel (ACP) sheet thickness – 4 mm;(ii) Thickness of acrylic sheet for letters – 3 mm;(iii) Language – English or Hindi or Marathi or a mix of them;(iv) LED lights (including their wiring) inside the board for glow;(v) Colour of ACP sheet, acrylic sheet, & LED lights shall be as directed by WCL;(vi) The board & the wiring should be weather-proof & water-proof; and(vii) Bugs such as mosquitoes, flies, etc. should not be able to enter the board.The text to be written shall be as directed by WCL and it may include logo(s) also. The rate is inclusive of the cost of material, transportation, scaffolding, wiring, consumables, labour, etc. all complete. |
| 6 | Providing & fixing acrylic 3D letters with the following specifications:(i) Acrylic sheet thickness – 3 mm;(ii) Thickness of letters – 65 mm;(iii) Language – English or Hindi or Marathi or a mix of them;(iv) LED lights (including their wiring) inside the letters for glow;(v) Colour of acrylic sheets & LED lights shall be as directed by WCL;(vi) All the letters & wiring should be weather-proof & water-proof; and(vii) Bugs such as mosquitoes, flies, etc. should not be able to enter the letters.The text to be written shall be as directed by WCL and it may include logo(s) also. Fixing shall be done on aluminium composite panels, brick work, RCC work, granite, etc. The fixing is to be done upto a height of 6 mtrs. The rate is inclusive of the cost of material, transportation, scaffolding, structural items (for maxing the box structure for the board), consumables, labour, etc. all complete. |
| 7 | Providing & fixing 4 mm thick Aluminium Composite Panel (ACP) cladding on gates or outer walls, with the following specifications:(i) Total thickness of ACP sheet – 4 mm;(ii) Thickness of aluminium layers – 0.5 mm each;(iii) Colour shall be as directed by WCL; and(vi) The ACP sheets and the joints should be weather-proof & water-proof.The fixing is to be done upto a height of 6 mtrs. The rate is inclusive of the cost of material, transportation, scaffolding, structural items (as required), consumables, labour, etc. all complete. |
| 8 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the directions of the department. (Cost of aluminium snap beading shall be paid in basic item): With textured/ frosted/ milky glass panes of 4.0 mm thickness (weight not less than 10kg/sqm). |
| 9 | Providing and fixing textured/ frosted/ milky glasses in aluminium windows or ventilators with opening & closing arrangement, including cost of accessories, etc. complete, except cost of aluminium work (which shall be paid in basic item): With textured/ frosted/ milky glass louvers of 4.0 mm thickness (weight not less than 10kg/sqm). |
| 10 | Providing & fixing fly proof wire gauze to windows or doors: Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides. |
| 11 | Providing & fixing heavy duty brass sprinklers with 360 degree adjustable rotation, range approx 6 mtrs (radius). |
| 12 | Supplying the following plants of variety/ breed/ species as directed by the department, in fresh condition, and planting & maintaining them for at least one month after plantation.Note:(i) Cost of plants & labour for plantation & maintenance is included in the rates of these items;(ii) All the personal safety accessories and basic working tools required for this job are to be provided by the contractor to the workers, and their shall be no separate measurement/ payment for them.(iii) Consumables (such as fertilizers etc.) & other materials required for the job shall be supplied by the contractor (details, quantities, & costs covered separately in item no. 12). Pipelines, sprinklers, etc. required for arrangement of water are covered separately in other items on this BoQ.(iv) Measurement for payment purpose shall be for surviving plants only after the one month maintenance period.(v) Water for plantation & its maintenance shall be made available by WCL without any cost to be charged from the contractor. |
| 13 | Henna, of approx 1 foot height |
| 14 | Vidya, of approx 1.5 feet height |
| 15 | Ashoka, of approx 4 feet height |
| 16 | Christmas tree, of approx 3 feet height |
| 17 | Rose, of approx 1.5 feet height |
| 18 | Crotons, of approx 2 feet height |
| 19 | Awla, of approx 2 feet height |
| 20 | Mango, of approx 3 feet height |
| 21 | Lemon, of approx 3 feet height |
| 22 | Neem, of approx 3 feet height |
| 23 | Bamboo, of approx 3 feet height |
| 24 | Diamond grass |
| 25 | Supplying the following materials of quality & brand as approved by the department, and putting them at designated places: |
| 26 | Based on item code 0303 of CPWD DSR-2025 for Horticulture & LandscapingCow dung/ Cattle dung manure |
| 27 | Diammonium phosphate (DAP) fertilizer |
| 28 | Vermicompost fertilizer |
| 29 | Dimethoate insecticide |
| 30 | Liquid fungicide of approved type |
| 31 | PVC/ rubber flexible pipe of 20 mm internal diameter, of superior quality |
| 32 | Letter-writing alongwith painting of background (including borders) with synthetic enamel paint 2 or more coats, to give an even shade. Colours/ shades to be as directed by the department. |
| 33 | Painting pictures (artistic painting) alongwith letter-writing (if directed) and painting of background (including borders) with synthetic enamel paint 2 or more coats, to give an even shade. Pictures, writing work, colours/ shades, etc. to be as directed by the department. |
| 34 | Supplying precast RCC arch-bridges for gardens with following specifications:(i) Span = approx 12 feet, width = approx 3 feet;(ii) With hand-railing;(iii) Wooden finish & texture;(iv) Load capacity = minimum 500 kg;(v) Weather-proof & water-proof; and(vi) Design shall be as approved by the department.Painting with wooden finish & texture is included in the rate of this item. However, if any letter-writing or painting pictures is required, it shall be paid separately. Earthwork, concreting, etc. required for fixing the bridges shall be paid separately. |
| 35 | Supplying precast RCC garden benches of approved brand with following specifications:(i) Back rest, legs, frame, etc. all included;(ii) Without arm rests;(iii) Wooden finish & texture;(iv) 3-seater capacity (length = 5.5 to 6 feet);(v) Weather-proof & water-proof; and(vi) Design shall be as approved by the department.Painting with wooden finish & texture is included in the rate of this item. However, if any letter-writing or painting pictures is required, it shall be paid separately. Earthwork, concreting, etc. required for fixing the benches shall be paid separately. |
| 36 | Decorative/ artistic painting of existing steel mural structures with synthetic enamel paint of approved brand, manufacture, colours/ shades in approved designs/ patterns: Two or more coats. |
| 37 | Providing & fixing inaugural curtain with following specifications:(i) Operated by remote-control;(ii) Size as directed by WCL;(iii) Colour & design as directed by WCL; and(iv) Decorations included (for this inaugural curtain only).Costs of motor, assembly, remote, other fittings, & fixing is included in the rate of this item. |
| 38 | Total impact of GST for the purpose of CTC Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Percentage BoQ SCHEDULE - B BoQ_Ver3.0 Percentage Normal INR Only INR Select, At Par, Excess (+), Less (-) IOCL Tender Inviting Authority: Staff Officer (Civil), CWS Tadali, Western Coalfields Limited Name of work: Renovation, modification, development, and beautification of main entrance gate, space outside front compound wall, security office, and allied works at Central Workshop under CWS TadaliNIT no.: CWTD-CIV-E-05-2026-27, S. No. 1 Name of the Bidder/ Bidding Firm / Company : 0.0 PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the bidder name and values only.) S. No. Item Description (Item no. 1.08 & 1.29 are based on CPWD DSR-2021 items; item no. 1.20 & 1.80 are from Maharashtra PWD Electrical Wing CSR for 2022-23; item no. 1.71 to 1.74 are from MJP SSR 2023-24; and remaining items are from CPWD DSR-2021) Item Code / Make Quantity Units Estimated Rate inRs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category Total amount excluding GST inRs. P TOTAL AMOUNT With Taxes Total amount in words |
| 39 | Items from/ based on Standard Schedule of Rates: |
| 40 | Item code 15.19Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge. |
| 41 | Item code 2.6.1Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil. |
| 42 | Item code 2.8.1Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 43 | Item code 2.27Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 44 | Item code 4.1.8Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). |
| 45 | Item code 26.72Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M - 30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. |
| 46 | Item code 4.1.3Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 47 | Based on item code 7.7.1 of CPWD DSR-2021Coursed rubble masonry (second sort) with hard stone in foundation & plinth with : Cement mortar 1:6 (1 cement : 6 coarse sand), using available stone at the site (excluding cost of stone). |
| 48 | Item code 15.9.2Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : In cement mortar. |
| 49 | Item code 7.7.1Coursed rubble masonry (second sort) with hard stone in foundation & plinth with : Cement mortar 1:6 (1 cement : 6 coarse sand). |
| 50 | Item code 16.70.1Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia 4 mm. |
| 51 | Item code 10.1Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 52 | Item code 12.50Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 53 | Item code 10.2Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 54 | Item code 10.28Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 55 | Item code 6.34.2 - (6.4.2 - 6.1.2)Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in foundation and plinth in : Cement mortar 1:6 (1 cement : 6 Coarse sand). |
| 56 | Item code 7.38.1.1Stone tile work for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade. 8mm thick (mirror polished and machine cut edge). Granite stone of any colour and shade. |
| 57 | Item code 8.2.2.2Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges. to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red. Area of slab over 0.50 sqm. |
| 58 | Item code 11.56.1Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent. |
| 59 | Item no. 2-1-6 of Maharashtra PWD Electrical Wing CSR for 2022-23Supplying and erecting LED square / circular Max. 25 W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2750 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. |
| 60 | Item code 15.7.4Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar. |
| 61 | Item code 5.1.2Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- All work up to plinth level : 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 62 | Item code 5.3Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III)derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 63 | Item code 5.22.6 & 5.22A.6Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or More. |
| 64 | Item code 5.9.1Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for mass concrete. |
| 65 | Item code 5.9.6Centering and shuttering including strutting, propping etc. and removal of form for: Columns, Pillars, Piers, Abutments, Posts and Struts. |
| 66 | Item code 5.9.5Centering and shuttering including strutting, propping etc. and removal of form for: Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 67 | Item code 5.9.19Centering and shuttering including strutting, propping etc. and removal of form for: Weather shade, Chajjas, corbels etc., including edges. |
| 68 | Based on item code 6.34.2 of CPWD DSR-2021Brickwork with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor two level in: Cement mortar 1:6 (1 cement : 6 coarse sand). |
| 69 | Item code 13.1.212 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand). |
| 70 | Item code 13.7.212 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand). |
| 71 | Item code 5.30Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. |
| 72 | Item code 13.47.1Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm). |
| 73 | Item code 13.61.1Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work. |
| 74 | Item code 13.81.1Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required said and colour complete to give and even said. Old work (one or more coats). |
| 75 | Item code 13.41.1 - item code 13.85.3Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer, of required shade and colour all complete: Two or more coats, excluding priming coat. |
| 76 | Item code 11.41A.1.1 (-) item code 11.42 (+) item code 11.43Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477 in average 3mm thickness, including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size: Size of Tile 600 x 600 mm. |
| 77 | Item code 11.46.2Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm. |
| 78 | Item code 11.37Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 79 | Item code 11.37AProviding and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 80 | Item code 10.13.1Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 81 | Item code 10.5.2Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece. |
| 82 | Item code 10.25.2Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 83 | Item code 9.21.2Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 84 | Item code 9.21.3Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. |
| 85 | Item code 9.118.2Providing and fixing to existing door frames. 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. |
| 86 | Item code 21.1.1.2Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion. Powder coated aluminium (minimum thickness of powder coating 50 micron). |
| 87 | Item code 21.1.2.2Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50 micron). |
| 88 | Item code 9.150Providing and fixing zinc alloyed (white powder coated) touch lock for uPVC sliding window with necessary screws etc. complete. |
| 89 | Item code 9.84Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. |
| 90 | Item code 9.96.2Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm. |
| 91 | Item code 9.97.2Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250x10 mm. |
| 92 | Item code 9.74.1Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10 mm. |
| 93 | Item code 9.100.1Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm. |
| 94 | Item code 9.101.2Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper. |
| 95 | Item code 9.67.2Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete : 115 mm. |
| 96 | Item code 9.46.2Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : 20 mm dia. |
| 97 | Item code 17.76.1Providing and fixing PTMT urinal cock of approved quality and colour. 15 mm nominal bore, 80 mm long, 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms. |
| 98 | Item code 17.13.2Providing and fixing white vitreous china water closet squatting pan (Indian type) : Orissa pattern W.C. pan of size 580x440 mm. |
| 99 | Item code 17.18.1Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity – White. |
| 100 | Item code 18.54.1Providing and fixing PTMT bib cock of approved quality and colour. 15mm nominal bore, 86 mm long, weighing not less than 88 gms. |
| 101 | Item code 18.55.1Providing and fixing PTMT stop cock of approved quality and colour. 15 mm nominal bore, 86 mm long, weighing not less than 88 gms. |
| 102 | Item code 17.7BProviding and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. |
| 103 | Item code 18.58.1.2Providing and fixing PTMT grating of approved quality and colour. Circular type. 125 mm nominal dia with 25 mm waste hole. |
| 104 | Item code 18.7.1Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work – Exposed on wall. 15 mm nominal outer dia Pipes. |
| 105 | Item code 18.7.2Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work – Exposed on wall. 20 mm nominal outer dia Pipes. |
| 106 | Item code 18.7.3Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work – Exposed on wall. 25 mm nominal outer dia Pipes. |
| 107 | Item code 18.17.1Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore. |
| 108 | Item code 18.18.3Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore. |
| 109 | Item code 18.48Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 110 | Item code 1(b)(iv), page 74 of MJP SSR 2023-24Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no. 4985 / 1988 excluding GST levied by GOI and GOM in all respect, including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent). One coupler and required cement solvent shall be provided with each full length pipe cost of which is included in the rate. Working Pressure 6 Kg. / Sq.cm. 110 mm. |
| 111 | Item code 6(B), page 80 of MJP SSR 2023-24Providing & Supply of PVC pipe specials for all class pipes. Tee 6 Kg/Cm2. 110 mm. |
| 112 | Item code 6(N), page 82 of MJP SSR 2023-24Providing & Supply of PVC pipe specials for all class pipes. PVC Bend 6 Kg/Cm2. 110 mm. |
| 113 | Item code 4(b)(iv), page 78 of MJP SSR 2023-24Lowering, laying and jointing with P.V.C. pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour, material, except cement solvent, rubber ring, as per IS code, etc. complete (with cement solvent joint / ring fit joint). Working Pressure 6 to 12.5 Kg./Sq.cm. 110 mm. |
| 114 | Item code 18.12.3Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work: 25 mm dia nominal bore. |
| 115 | Item code 18.12.1Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work: 15 mm dia nominal bore. |
| 116 | Item code 15.60Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-incharge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 117 | Item code 16.83Taking out existing CC interlocking paver blocks from footpath/ centralverge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. |
| 118 | Item code 16.84Laying old cement concrete interlocking paver blocks of any design/shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost). |
| 119 | Item no. 12-3-5 of Maharashtra PWD Electrical Wing CSR for 2022-23Supplyingand erecting minimum Three & above star rated 1 phase, 230 V, 50 Hz, submersible pump set of 0.75 KW/1HP for erection on open well, pump having delivery head from 30 to 15 m and discharge from 30 to 270 litres. per minute & pipe of Suction 32 mm/Delivery 25 mm diameter erected with necessary H type clamps as per specification No. WP-OSP. |
| 120 | Item no. 16.21Engraving letters in hard stone. Total in Figures 11839001.344999995 11839001.344999995 INR One Crore Eighteen Lakh Thirty Nine Thousand &One and Paise Thirty Four Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 INR Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
