Tender for Beautification and Illumination of Shree Bodgeshwar Temple at Mapusa
Tender Value
2.78 Crore
Estimated cost
Bid Submission
13 Jul 2026
2 days left
EMD
5.56 Lakhs
Bank guarantee accepted
Document Fee
15000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Beautification and Illumination of Shree Bodgeshwar Temple at Mapusa
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 09-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 13-Jul-2026 |
| 2 | 06-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 09-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL WORKS |
| 2 | Earth work in excavation over areas of all type of strata comprising of any type of material such as soil ,silt,clay, sand, gravel, murum of all varieties, shingles, pebbles, all type of congolmerates,latrite rock,soft rock,ordinary rockdisintegratednrock,fissured/shattered rock, decomposed rock, weathered rock and all such material either in full or part as the case may be adopting any method/ methods as may be convenient or permitted (blasting prohibited) including chiselling ,wedging,etc., in all conditions such as dry , moist, foul, saturated, submerged, etc., as directed by the Engineer etc., all complete including dressing of side ramming bottom, all leads, lifts and depths including getting out excavated soil & stacking as directed , pumping and bailing out water, barricading,danger lighting, guarding as directed . |
| 3 | Earthwork in excavation by mechanical means(hydraulic excavator)/manual means in foundationpipeline trenches drain (not exceeding 1.5 m in width or 10 sq.m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. b) All types of Ordinary rock including all types of laterite rock, blasting prohibited |
| 4 | Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer . |
| 5 | Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete. |
| 6 | Laterite masonry in neatly dressed stones of size as specified in cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and superstructure |
| 7 | Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggregate 20 mm. nominal size) excluding cost of centering, shuttering and finishing in: a) All work up to Plinth level |
| 8 | Providing and laying in position ready mixed concrete (RMC) with usage of Ordinary Portland Cement manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate/retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineerin-charge. All works upto floor V level iv) M-25grade of concrete |
| 9 | Centering and shuttering including strutting, propping, & removal of form for a) Foundation, footings, bases of columns |
| 10 | Centering and shuttering including strutting, propping, & removal of form for b) Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels plinth beams not exceeding 1m in depth |
| 11 | Centering and shuttering including strutting, propping, & removal of form for c) Columns, Piers, Pillars, Aburments, Posts and struts (square rectangle polygon in plan) |
| 12 | Providing TMT steel reinforcement bars of SAIL, TATA, VIZAG made only (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member. Minimum Grade of Steel - Fe 500 |
| 13 | Steel work welded (SAIL, TATA. VIZAG & usingelectrodes of Ador or ES4B or Deh Secheron make only)in built up sections trusses and framed work including cutting, hoisting, fixing in position and applying priming coat of red lead paint. b) In tees, angles, flats and channels |
| 14 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of approved make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 15 | Providing and fixing M.S. Fan clamp type I or II of 16 mm dia M.S. Bar bent to shape with hook ends in RCC slabs during laying including painting the exposed portion of loop, all as per standard design complete. |
| 16 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc.with hairline finish, including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 17 | Providing & fixing 18 mm thk Flame Finish Granite Tread Tiles in single piece in Jet Black with rounded off nosing, antiskid groove laid on 20 mm (average) thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) with neat cement slurry including pointing with pigmented cement slurry to match the shade of slab, cleaning etc. complete. ( Price range 2000 to 2100 Rs per Sq Mtr.) |
| 18 | Providing and fixing Granite stone slabs (mirror polished) 18mm thick in risers of steps, skirting, dado and pillars laid on cement paste and jointed with grey cement slurry mixed with pigment to match the shade of the slabs,including rubbing and polishing complete. Elite Brown |
| 19 | Providing and laying Polished Granite stone flooring, coping in required design and patterns, in linear as well as curvilinear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand), laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. ( Price range 1550 to 1600 Rs per Sq Mtr.) |
| 20 | Providing and laying factory made Shot blasted cement concrete interlocking paver block of minimum M35/M40 grade made by heavy duty block making machine with strong vibratory compaction and of aprpoved size and design / shape laid in 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand, etc. all complete as per the direction of Engineer.- in I, Wave, Rectangular, Square etc. shapes. The products should comply to IS 15658:2006 and manfucatured by ISO9001:2008 certified plant. The shot blasting should be done using 0.4-0.5mm dia steel shots with a speed of 3200 rpm a) 60 mm thick in all colours except grey (M35 grade) |
| 21 | Providing and laying factory made Shot blasted cement concrete interlocking paver block of minimum M35/M40 grade made by heavy duty block making machine with strong vibratory compaction and of aprpoved size and design / shape laid in 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand, etc. all complete as per the direction of Engineer.- in I, Wave, Rectangular, Square etc. shapes. The products should comply to IS 15658:2006 and manfucatured by ISO9001:2008 certified plant. The shot blasting should be done using 0.4-0.5mm dia steel shots with a speed of 3200 rpm b) 60 mm thick in Grey colour (M35 grade) |
| 22 | Providing and fixing colour coated galvulium roofing sheets of 0.5mm thickness including all the accessories (TATA make) but excluding the cost of purlins, rafters, trusses, flashings etc. complete as per the directions of the Engineer in charge. |
| 23 | Add for providing & fixing Flashings -[Corners, Ridges, valleys, gable end & Trims] (Girth upto 610mm) including all the accessories complete as per the directions of the Engineer in charge. |
| 24 | Providing and fixing Prince or equivalent make PVC SWR half round eaves gutter with bolts, nuts and flat iron brackets 40 x 3 mm size complete. A) 140 mm nominal size |
| 25 | Extra for providing flat iron bracket 50 x 3 mm size instead of 40 x 3 mm size with necessary bolts nuts, washers etc. for fixing A.C. gutters to purlins. |
| 26 | Extra for providing and fixing prince or equivalent make PVC SWR short stop ends for socketed half round eaves gutters. A) 140 mm nominal size |
| 27 | 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge. |
| 28 | Extra for providing and mixing water proofing material proportion recommended by the manufacturers. (a)12mm cement plaster 1: 3 (1 cement : 3 sand) |
| 29 | Painting three or more coats with acryllic exterior paint of approved brand and manufacture (such as weather shield,APEX) including applying one coat of cement primer and one coat of surface treatment etc. complete. |
| 30 | Painting (two or more coats) with synthetic enamel paint of approved brand and manufacture in all shade or new work over and under coat of suitable shade with ordinary paint of approved brand and manufacture to give an even shade |
| 31 | Dismantling the tile work in floors and roofs laid in cement including stacking of materials within 50 meters lead for thickness of tiles 10mm to 25mm. |
| 32 | Carting away unwanted excavated material such as soil, lime, moorum, building rubbish, laterite stone, Excavated earth, ordinary rock etc. from site lead of 5 km including all loading & unloading charges ( A ) ( by mechnaical Automative Transport ) Contractor should arrange land for dispose up these material at his own cost Lead upto 5 km. |
| 33 | Supply, fabrication and installing in position MS gates of required width and height of including wicket gate and Rolling Gate(if necessary) of approved size made of channels joists, angles, plates, pipes and MS sheets including stiffeners, bracing, fabricated hinges, MS aldrops locking arrangement, tempered steel pivots, guide track of MS tee, ball bearing arrangement, casters wheels etc. all complete as per drawing, specification and as directed by Engineering in charge all complete. The main entrance gate shall be fabricated out of Mild steel sections completed with applying a priming coat of approved steel primer and two coats of synthetic enamel painting. The structural steel works for gates shall include supply, fabrication, transportation, erection of structural steel gates complete with placing in position embedded parts in concrete / brickwork and in road surface including cutting, grinding, drilling of holes, welding and painting etc complete |
| 34 | Supplying and fixing of Precast RCC slabs(factory made,the factory should be ISO certified and registered under Dirctorate of Industries, Govt. of India) at site in concrete Grade of M-25 with 20 mm nominal size Granitic or basaltic aggregate, consolidated by means of mechanical platform, vibration etc. with lifting hooks of M.s. 10mm bars and PVC cups including cost of reincforcement, Certificate from manufacturer shall be produced indicating grade of concret and minimum content of steel in the product along with 5 year free replacement warranty in case of breakage complete and as directed by Engineer -in -charge. a. Size 900 x 400 x 150 mm with steel reinforcement not less than 7 kg per unit -30 T capacity. |
| 35 | Supplying and stacking of good earth ( Garden Soil) at site including royalty and carriage upto 1 km. (earth measured in stacks will be reduced by 20% for payment). |
| 36 | Rough dressing the trenched ground including breaking clods. |
| 37 | Fine dressing the trenched ground. |
| 38 | Spreading of sludge, dung manure or/and good earth (Garden Soil) in required thickness (cost of sludge, dung manure or/and good earth to be paid separately). |
| 39 | Supply at site of work/store deoiled Neem cake duly packed in used gunny bags as per MoRT & H Specification 308.2 |
| 40 | Supplying of sludge duly stacked at site/store as per MoRT & H Specification 308.2 |
| 41 | Providing and fixing M.S. flat iron tree guard 60cm dia & 2 m high above ground level, formed of 4 nos. 25 x 6mm and 8 nos. 25 x 3mm vertical M.S. flat iron rings in two halves, bolted together with 8mm dia and 30 mm long bolts including painting two coats with paint of approved brand and manufacture over a coat of priming, complete in all respects. |
| 42 | Filling mixture of earth & sludge or manure in the desired proportion in trenches flooding with water and leveling (cost of supplying earth and sludge of manure and mixing excluded). |
| 43 | Providing, laying and planting various Trees & Palms as listed below as per the mentioned size (3.0 m to 4 m Ht.) including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Plumeria Alba (chapha) |
| 44 | Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Hymenocallis Littoralis (spider lily) |
| 45 | Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Canna Indica (canna yellow +red) |
| 46 | Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Valeriana Wallichii (tagar) |
| 47 | Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Allamanda Neriifolia (golden trumpet) |
| 48 | Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Lantana Montevidensis (lantana white+mauve) |
| 49 | Providing and fixing white vitreous Wall Hung type (European Type) water closet with symphonic low level 10 litres cistern mounted on the commode with white plastic seat and lid with all necessary fitings and pipe connection etc. complete. W.C. pan with white plastic seat and lid. |
| 50 | Providing and fixing Hand Shower (Health Faucet) with 8mm dia, ABS/brass body with double lock 1.00m long Flexible tube (Brass plated stainles steel flexible hose) and wall hook/holder of approved quality confirming to IS standards. |
| 51 | Providing and fixing NICKEL chrome plated copper alloy Fancy Two Way Bib Cock with single knob and wall flange conforming to IS8931:1993 15mm nominal bore. |
| 52 | Providing and fixing toilet paper holder : C.P. brass |
| 53 | Providing and fixing vitreous china wash basin with RS or C.I. brackets painted white, 15 mm C.P. brass pillar taps, C.P. brass chain with rubber plug 32 mm C.P. brass waste coupling of required pattern, 32 mm diameter M.I. or C.P. brass trap and union complete, including cutting and making good the walls where required. Flat back wash basin size 630 x 450mm with a single 15 mm C.P. brass pillar taps. |
| 54 | Providing and fixing white vitreous china flat back Large lipped front urinal basin of 590 x 375 x 390mm size with Urinal Valve Auto closing system with built in control cock & wall flange with fittings, spreader, R.S. or C.I. brackets, standard size C.P. Brassl flush pipe and spreaders with C. P. brass unions & C. P. Brass clamps with waste fitting as per IS 2556, PVC trap with outlet grating and other couplings in CP Brass complete, including painting, fittings, cutting and making good the walls and floors where required. - Range of one urinal basin One urinal basin with 5 litres p .v .c. Automatic flushing cistern. |
| 55 | Providing and fixing NICKEL chrome plated copper alloy Fancy BOTTLE TRAP 32MM Jaquar make or equivalent. Confirming to IS 8931;1993 (For Urinal) |
| 56 | Providing & fixing liquid soap container with C. P. brass lid and brackets fixed to wooden cleats with C. P. brass screws Plastic container |
| 57 | Providing and fixing brass bib cock (heavy) of approved quality : 15 mm nominal bore |
| 58 | Providing and fixing Grab Bar (JAQUAR) – 600mm long (for handicap toilet) |
| 59 | Providing and fixing nahani trap of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door : 110mm |
| 60 | Providing and fixing nahani trap of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door : 75mm |
| 61 | Providing and fixing Angular Stop Cock with wall Flangue - Jaquar make. (a)Florentine (FLR-5053N) 15mm of approved quality. |
| 62 | Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc.15 mm outer dia CPVC pipe |
| 63 | Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. 20 mm outer dia CPVC pipe |
| 64 | Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. 25 mm outer dia CPVC pipe |
| 65 | Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. 32 mm outer dia CPVC pipe |
| 66 | Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer. External work. SCH-40(blue)/(white) 25mm outer dia. |
| 67 | Providing and fixing brass full way valve (heavy) duty with wheel of approved quality : (Toilet internal Ball valve, Domestic, flushing, hot & return - ball valve for terrace down takes, Domestic flushing hot & return - oht to terrace loop valves, Domestic & flushing UGR TO OHT valves.) a) 15mm nominal bore |
| 68 | Providing and fixing brass full way valve (heavy) duty with wheel of approved quality : (Toilet internal Ball valve, Domestic, flushing, hot & return - ball valve for terrace down takes, Domestic flushing hot & return - oht to terrace loop valves, Domestic & flushing UGR TO OHT valves.) b) 20 mm nominal bore . |
| 69 | Providing and fixing brass full way valve (heavy) duty with wheel of approved quality : (Toilet internal Ball valve, Domestic, flushing, hot & return - ball valve for terrace down takes, Domestic flushing hot & return - oht to terrace loop valves, Domestic & flushing UGR TO OHT valves.) c) 25 mm nominal bore . |
| 70 | Providing and fixing ball valve ( brass ) of approved quality (Low pressure with copper floats) brass ball valve with copper floats 32 mm nominal bore |
| 71 | Providing and fixing non-return valve of approved quality : a) 32 mm nominal bore |
| 72 | Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. C. I. single large orifice air valve similar to Glen field fig H4 or similar with steel ferrule at inlet screwed suitable to working pressure of 10kg/sq.cm. (Class B) 25 mm |
| 73 | Fixing C.I. Single large orifice air valve of similar make with bronze ferrule at inlet screwed suitable to working pressure of 15kg/sq. cm for 12 mm to 20mm and 10kg/sq. cm for 25mm to 50mm,complete,as directed by the engineer in-charge,of following sizes. 25 mm |
| 74 | Providing and fixing rigid PVC S.W. R. (soil, waste and rain water drainage pipes of approved make including lubricant etc. complete (single/double) socket-ed : 110mm dia |
| 75 | Providing and fixing rigid PVC S.W. R. (soil, waste and rain water drainage pipes of approved make including lubricant etc. complete (single/double) socket-ed : 75mm dia |
| 76 | Providing,laying and fixing P.V.C.pipe of 40mm dia. with fittings such as bends, tees, reducers, clamps etc.including necessary excavation,trench filling etc. complete.Including removing existing pipe line and disposing off or as directed etc. complete. |
| 77 | Providing,laying and fixing P.V.C.pipe of 50mm dia.withfittings such as bends, tees, reducers, clamps, etc.including necessary excavation,trench filling etc.complete. Including removing existing pipe line if necessary and disposingoff the same or as directed etc. complete. |
| 78 | Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating. 110mm |
| 79 | Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating. 75mm |
| 80 | Providing and fixing rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etc complete bend with door : 110mm |
| 81 | Providing and fixing rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etc complete bend with door : 75 mm |
| 82 | Providing and fixing single Tee of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door : 110mm |
| 83 | Providing and fixing single Tee of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door : 75mm |
| 84 | Providing and fixing single “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door 75mm |
| 85 | Providing and fixing R.P.V.C. vent cowl: 110mm |
| 86 | Providing and fixing R.P.V.C. vent cowl: 75mm |
| 87 | Providing and fixing square-mouth S.W. Gully trap grade ‘A’ complete with c.i. grating brick masonry chamber and water tight C.I. cover with frame of 300 x 300 mm size (inside the weight of cover to be not less than 4.53 kg). And frame to be not less than 2.72 kg as per standard design : 150 mmx 100mm P or S.type |
| 88 | Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse sand ;4 graded stone aggregate 20mm nominal size foundation concrete 1:2:4 mix (1 cement ;2 coarse sand :4 graded stone agrregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cemetn and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design. Inside size 90 x80 cm and 60 cm deep including C.I. cover with frame (light duty) 455 x610mm internal dimensions total weight of cover ad frame to be not less than 38 kg. (weight of cover 23 kg. ) |
| 89 | Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse sand ;4 graded stone aggregate 20mm nominal size foundation concrete 1:2:4 mix (1 cement ;2 coarse sand :4 graded stone agrregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cemetn and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design.Inside size 60 x 60cm and 60cm deep including C.I. cover with frame (light duty) 455x610mm internal diameter total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg). |
| 90 | Supplying and erecting 1 phase, 230 V, 50 Hz, submersible pump set of 0.75 KW/1HP for erection on open well, pump having discharge 35 / 270L.P.M., head 30 / 15 m & pipe of Suction 32 mm/Delivery 25 mm diameter erected with with necessary H type clamps as per specification no. WPOSP |
| 91 | Supplying and erecting D. O. L. Starter suitable for 250V.single phase, 50 cycles with overload element with necessary materials and connected to supply upto 3 H.P. |
| 92 | Providing and placing on terrace roof of floor two (1st flor roof single piece rotational moulded polythene water storage tank having I S I mark and conforming to I S 12701; 1996. 1000 lit. capacity |
| 93 | ELECTRICAL WORKS |
| 94 | Supply,installation,testing,commisioning of Architectural Pole of 6mtr Height Single arm made of galvanised iron sections of 140mm & 76mm dia. Wind speed considered in design 50m/s, IS 875: PART - 3 :1987 .Material for tubes steel of grade YST 210. Material for base plate steel of grade E250 to IS 2062 ; 2011. The Dingo Bracket will be provided with reducer/expander for holding the suspended type fixture on to the main pole with all arrangements having position perpendicular to the ground. The bracket shall be single arm on 6mtr with a span of 1000mm. The bracket top shall be covered with FRP cap to enclose the pipe. The Pole will be placed with a Aluminium embellishments on the bottom & Middle section for aesthetic & Decorative purpose. The pole will be provided with an inbuilt IP 65/66 junction box to fix 32Amp Connectors & 6Amp MCB inside the cut window of the bottom pipe the in built box should have a flush door of suitable size. The Decorative pole will be mounted on a square base plate of size 250 X 250mm having 12mm thickness. The mounting steel plate along with hot dip galvanised foundation bolts of size M16 X 600mm to be used for ensuring firm grouting in the specially designed /Provided RCC foundation. The Galvanised pole should be painted in 3 layer coating (Coating thickness should be more than 50 microns minimum) in which 1st layer with etch primer, 2nd layer with epoxy zinc primer & 3rd final layer with PU Paint of Matt Black on Pole and Golden on Aluminium Embellishment or as per GTDC .Make-Havells, Reytek, Suncity, La luminie as required as directed by the Engineer In-charge. |
| 95 | Supply,installation,testing,commisioning of 70W decorative luminaire made of spun aluminium body with pressure die-cast heat management (PDCHM) and the IP65 optical compartment with high power LED/s is comprised of a deep drawn chemically polished and co-extruded, thermoformed polycarbonate protector stabilized agent UV rays suitable for 70W LED. Fitting should be suspended mounting type fixture. System Wattage:70W LED, Protection class:IP65, Driver Integral: Constant Current, Input Voltage: 230-240 Vac, Frequency: 50-60Hz, Operating Voltage:120- 277Vac, Operating Temperature: 0deg to +50deg C, single phase ac supply. LED Lumens: @120lm/w 8400lm, CRI(Ra):>80, LED Colour Temperature: 3000K, Life Span:>59,000 Hours,, Physical Body: Die cast Aluminium Base, Body Spun Aluminium, Diffuser: Convex Type Translucent / V Translucent Polycarbonate glass, Mounting: Suitable for 48mm OD Pipe, Finish: Powder Coated Black, Driver Power Factor:>0.95, THD:<7.8%,Surge Protection: 4KV, Efficiency:>87%. Fitting should have inbuilt driver with efficiency >0.9 and having surge protection device of 4KV and external surge protection device of 10KV. IP65 and LM79-2019 report to be provided. Make: Havells, Reytek, Suncity, La luminie as required as directed by the Engineer In-charge. |
| 96 | Supply ,Installation,Testing & Commisioning of 45-50W decorative luminaire made of spun aluminium body with pressure die-cast heat management (PDCHM) and the IP65 optical compartment with high power LED/s is comprised of polished and co-extruded, thermoformed polycarbonate protector stabilized agent UV rays suitable for 40-45W LED. Fitting shall be Post top mounting type fixture. System Wattage: 40-45W LED, Protection class:IP65, Driver Integral: Constant Current, Input Voltage: 230-240 Vac, Frequency: 50-60Hz, Operating Voltage:120- 277Vac, Operating Temperature: 0deg to +50deg C, single phase ac supply, LED Lumens:6000lm, CRI(Ra):>80, LED Colour Temperature: 4000K, Life Span:>60,000 Hours,, Physical Body: Die cast Aluminium Base, Body Spun Aluminium, Diffuser: Convex Type Translucent / V Translucent Polycarbonate glass, Mounting: Suitable for 48mm OD Pipe, Finish: Powder Coated Black, Driver Power Factor:>0.95, THD:<7.8%,Surge Protection: 4KV, Efficiency:>87%. Fitting should have inbuilt driver and having surge protection device of 4KV and external surge protection device of 10KV . LM79-2019 report to be provided. Make: Havells, Reytek, Suncity, La luminie as required as directed by the Engineer In-charge. |
| 97 | Supply of 3 core unarmoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 Core 2.5 sq.mm |
| 98 | Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 4 sq.mm |
| 99 | Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 1/2 Core 35 sq.mm |
| 100 | Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 Core 16 sq.mm |
| 101 | Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 16 sq.mm |
| 102 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm in the existing RCC/HUME/STONEWARE Metal pipe, etc. complete as required |
| 103 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. a) In soily strata |
| 104 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. (a) In soily strata |
| 105 | Laying of one number additional PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground in the same trench in one tier horizontal formation including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. a) In soily strata |
| 106 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface, etc. complete as required |
| 107 | Construction of manhole rectangular in shape including cement concrete 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size) foundation thickness of concrete 20cms and offset 10cms on both sides and first class brick work with bricks class designation 100kg/sq.cm (wire cut bricks) cement mortar 1:3 (1 cement : 3 coarse sand) 23cms thick including providing & fixing CI footrests confirming to IS 5445/69 or revised and whose weight shall not be less than 5.30kgs including fixing in man-hole at 30cm c / c in 20x 20x10cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) and 12mm thick plaster inside and outside with cement mortar 1:3 (1 cement : 3 coarse sand) including adding waterproofing compound of approved brand in cement mortar with a floating coat of neat cement and making channel in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20m nominal size) neatly finished complete as per standard design. III) Inside size 0.60x0.60m and 0.60m deep (with medium duty DI manhole cover & frame of size 0.60x 0.60m weighing 90kgs ) including fixing with cement concrete 1:2:4 ( 1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size and applying the frame & cover with coal tar.(Refer Quantity in drawings) |
| 108 | Providing at store or site work non-pressure RCC pipes of with collar joints conforming to IS:458-2003 revised as per amendment No.11 , including freight, carting, loading, unloading, stacking etc. complete. c) 150 mm Dia.NP2 Class |
| 109 | Conveying carefully from stack at site, 250m from both sides rolling and lowering into trenches, laying and jointing true to line and level, RCC spun pressure and non-pressure pipes of various classes, specials including collar and perfect linking of joint with jack to correct position including cost of jointing material in cement mortar 1:2, necessary hydraulic testing, curing of cement mortar etc. complete.Nominal diameter in mm b) 150 mm |
| 110 | Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 3 x 1.5/2.5 Sq. mm. |
| 111 | Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 4 x 4 Sq. mm. |
| 112 | Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 3 1/2 x 35 Sq. mm. |
| 113 | Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 3 x 16 Sq. mm. |
| 114 | Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 4 x 16 Sq. mm. |
| 115 | Supply Installation, testing and commissioning of Following all Outdoor Feeder Pillar-1/Panels comprising below points. 1)-Panels shall be fabricated out of 16/14 swg CRCA sheet steel, with necessory structural supports in form of structural steel sections. 2)-Floor mounted (Include stand), IP-55 degree protection, Bottom or Top bus duct or cable entry as per the case & Bottom cable exit steel, 2mm frame, 1.6 mm compartments & tank process treated & 2- times Epoxy painted. 3)-Proper gland size holes to be provided by the manufacturer with proper sticker and danger sign on all sides of panel. 4)-Current Density- 1.0 Ampere/1 Sq.mm (IS-8623 for factory built assembly). 5)- Earthing terminal at both end. 6)-Paint-- Exterior Enclosure Tank process treated & 1 coat of Epoxy painted and 2 coat of Siemens grey as per shade RAL7032 with PU Paint for exterior and Black for base frame , everywhere maintaining micron upto 75. 7)All Starters are according to Type-II Cordination .8)Any other related details as per Engineer Incharge. Refer Single Line Diagram. Note : Excluding Stabiliser & Energy Meter cost.Main Incomer - 25 to 100 A TPN MCCB,Thermal Magnetic ,25KA -2 Nos.3/4 pole power contactor 16A to 25 A ,415V -2 Nos. Programmable Digital Almanac Astro Timer switch with 10 Hrs Battery Backup -2 Nos. Outgoing - 6 A to 32 A, C series SP MCB , 10 KA-17 Nos. 6 A to 32 A, C series TP MCB , 10 KA -4 Nos 40-63 A, C series TP MCB , 10 KA -7 Nos 1no. SPD Type 1+2,Iimp 12.5kA Imax=50kA .And Miscellaneous items, wire,selector switch , Cable Terminal blocks etc. Space Provision only for 3 phase Meter(300 x 400 ,LxH) and Stabiliser . |
| 116 | Supply, installation, testing and commissioning of electronic type three phase energy meter (KWh), 4 wire, ISI marked, in polycarbonate or sgheet steel body ( base mounting type) with counter display/LCD display, with ELT, in Class 1.0, 50 Hz, 240 V. AC duly tested by MRT along with Test Certificates, complete as required of following capacity of make L & T only. (b) 10 to 40 A |
| 117 | Supply of 6 KVA 3 nos. voltage stabilizer ,Input voltage range (V ) =90-300 V ,Output voltage (V ) =240 V ,Output Voltage Regulation = 1% of nominal output voltage,Automatics High & low Voltage cut off input and out put voltage Circuit protections, single phasing preventer/Phase reversal protection,over load & Short circuit protection(Use MCB),Independent Phase Control,LCD /LED Display for regulations mode ,Bypass mode & fault conditions,Automatic bypass: A Fault conditions,Protection Class : IP 20 ,Ambient Temperature : 0 to 45 Degree Celsius ,Wave form Distortion: Pure sine wave. |
| 118 | Supplying and fixing following way SPN sheet steel MCB distribution board Consumer Unit 240 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar hinged front acrylic cover for the MCB knobs detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator) (b) 2 + 8 way Cat A |
| 119 | Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. a) SP, Cat A |
| 120 | Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. b) DP, Cat A |
| 121 | Supplying and fixing following rating double pole (single pole and neutral) 240 V RCCB having a sensitivity current upto 300mA in the existing MCB DB complete with connections testing and commissioning etc as required (a) 25 A, Cat A |
| 122 | Supplying and fixing SP blanking plate in the existing MCB DB complete as required. |
| 123 | Supply , Installation , Testing and Commissioning of Cable Junction Boxes IP 66/67 “weather proof”(Size -155 x 210 x 92 (LXBXH)mm + Cable termination upto 16 Sqmm size.), for outdoor installation(with knockouts for cable entry) with all accessories. Make: Hensel ,Neptune as required as directed by the Engineer In-charge |
| 124 | Earthing with GI earth pipe 2 mts long 40 mm dia medium class with ISI mark, of approved brands including accessories and providing masonry enclosure with CI/RCC cover having locking /Lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size not less than 1.0x1.0x 2.0 mtrs(min) and disposal of excavated soil. b) Class B GI pipe, 40mm diameter as per specifications. c) Charcoal/salt as per specs ( paid seperately). d) Refilling the pit of size not less than 1.0x1.0x 2.0 mtrs(min) with soft black soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe . g)watering arrangement(plumbing will be paid seperately). (b) In rocky strata |
| 125 | Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosure with CI/RCC cover having locking/Lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 3.0 mtrs(min) and disposal of excavated soil. c)Watering GI pipe, 20mm, Class B, with funnel as per specs. d) Charcoal/salt as per specs ( paid seperately). e) Refilling the pit of size 1.0x1.0x 3.0 mtrs(min) with soft black agriculture soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe.g)watering arrangement(plumbing will be paid seperately). b)In rocky strata |
| 126 | Extra for using salt and charcoal for pipe earth electrode as required( 65 Kgs of Charcoal and 5 Kgs of Salt). |
| 127 | Extra for using salt and charcoal for GI or copper plate earth electrode as required( 96 Kgs of Charcoal and 5 Kgs of Salt) |
| 128 | Supplying and laying 25 mm x 6 mm GI strip at 0.5 m below ground as strip earth electrode including soldering etc. as required |
| 129 | Providing and fixing 25 mm x 5 mm GI strip on surface or in recess for coneections etc. as required |
| 130 | Supplying and laying 6 SWG GI wire at 0.5 m below ground level for conductor earth electrode including soldering etc. as required |
| 131 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed PVC conduit(heavy) with modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. a) Group B -- with Cat A Modular Accessories |
| 132 | Wiring for group controlled light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable (with)in recessed PVC conduit(heavy) and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 133 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the (with) independent recessed PVC conduit(heavy) of appropriate size as required. b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire (20mm Conduit) |
| 134 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the (with) independent recessed PVC conduit(heavy) of appropriate size as required. (c) 2 x 4 sq.mm + 1 x 4 sq.mm earthwire (20mm Conduit) |
| 135 | Supplying and fixing of following sizes of rigid PVC conduit alongwith accessories in surface(medium)/recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required. b) 25 mm |
| 136 | Supplying and fixing of following sizes of rigid PVC conduit alongwith accessories in surface(medium)/recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required. (c) 32 mm |
| 137 | Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required (a) 5/6 A switch Cat A |
| 138 | Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required (d) 3 pin 5/6 A socket outlet Cat A |
| 139 | Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required b) 15/16 A switch Cat A |
| 140 | Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required d) 6 pin 15/16 A socket outlet Cat A |
| 141 | Supplying and fixing modular blanking plate on the existing modular plate switch box excluding modular plate etc. as required a) Cat A |
| 142 | Supplying and fixing following size modular GI box alongwith modular base and cover plate for modulator switches in recess etc. as required (a) 1 or 2 Module ( 75 mm x 75 mm) Cat A |
| 143 | Supplying and fixing following size modular GI box alongwith modular base and cover plate for modulator switches in recess etc. as required b) 4 Module ( 125 mm x 7 mm) Cat A |
| 144 | Supplying and fixing following size modular GI box alongwith modular base and cover plate for modulator switches in recess etc. as required (c) 6 Module (200mm x 75 mm) Cat A |
| 145 | Supplying & erecting of LED 20W tube light fitting (4 feet) with aluminium housing, heat sink, integrated HF electronic driver complete.(Includes suspension accessories). Make: Philips, Reytek, Leska, Crompton, Wipro, Havells as required as directed by the Engineer In-charge |
| 146 | Supply and erecting of 48 inch ( 1200mm sweep) ceiling fan, double ball bearing type, , complete with all accessories. (b) Cat B |
| 147 | Supply and erecting fan hook box ( 100 mm diameter or equivalent square size, 75mm deep) fabricated out of 16 SWG sheet steel with 10 m round bar hook bounded to RCC steel upto 50 mm length protruding on each side of the box, including painting with 2 coats of red oxide, complete as required. |
| 148 | Supply and erecting 'J' type Mild Steel fan hook fabricated out of 35 X 6 mm flat strip suitable for rafters complete with coach screws etc as required.(c) For 6 inches rafter size |
| 149 | Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required (a) Cat A |
| 150 | GI Pipe Medium Class 25 mm (Civil GSR 1034 (f)(iii)) |
| 151 | SITC of high quality long through mono color wash light, Protection Rating : IP66,complying toBIS standard \\"IS 10322 (Part 5/Sec 1): 2012\\" andhavingCEcertificationagainststandard\\"LowVoltageDirective&ProtectiveEquipment-EN60598-1:2015\\",and\\"Electromagnetic Compatibility Directive-EN 61547: 2009\\", Mounting Structure :Adjustable surfacemount yoke arrangements for fixing the lights having the rotationdegrees embosed in the die cast. Power consumption : 100W, CCT :1800K/3000K/4000K/6000K, (as per the design approval), Optics : PMMAwith holder,BeamAngle:15º/25º/45º/60º,Control :ON/OFF,Body:Diecasted/extrudedaluminiumwithembossedmanufacturer logo,Hot spot and light distribution :OpticsDesigned tominimizehot spots&fringing indifferent applications. Power Input :ConstantDC24Vwith external driver, Surge Protection : Inbuilt surge protection in the driver 2KV4KV(Additional ifrequiredwillbeaddedaspertherequirement),Toughenedtransparentglass having the IK protection up to IK08, Painting : Chemical 3/7 tank processedtreatment before the powder coat black/ash/approved color coat. Fixture will besuitable to operate in a temperature range of 0°C to 50°C,Thelight fixturesarehaving IP68air ventmadeof stainless steelwhichhelps todesiccate&prevent fromformingmoisture inside the light fixture at worst environmental condition. LED lifeshouldbeat least 50,000burninghours at L70 at 35degreecentigrade. Luminaire isinclusiveof Integral male/female waterproof connectorswith structures inprewiredconditionsasper ISstandard.PCBthicknessmustbe1.6mm,35micronCopper,2WTCwithBlack orWhitemasking, Copper /OSP finish. LM79, IK07, IP66, NABLAcrediatedlaboratory.LEDMakesshouldbeCREE,LumilLED,Osram,Seoul,Nichiaorequivalentwiththeengineeror3rdpartytestinglaboratoryapproval.PowerLoopIn/OutalongwithIP67connector having the length >300mm. |
| 152 | SITC of high quality long through mono color wash light, Protection Rating : IP66,complying toBIS standard \\"IS 10322 (Part 5/Sec 1): 2012\\" andhavingCEcertificationagainststandard\\"LowVoltageDirective&ProtectiveEquipment-EN60598-1:2015\\",and\\"Electromagnetic Compatibility Directive-EN 61547: 2009\\", Mounting Structure :Adjustable surfacemount yoke arrangements for fixing the lights having the rotationdegrees embosed in the die cast. Power consumption : 50W, CCT :1800K/3000K/4000K/6000K, (as per the design approval), Optics : PMMAwith holder,BeamAngle:15º/25º/45º/60º,Control :ON/OFF,Body:Diecasted/extrudedaluminiumwithembossedmanufacturer logo,Hot spot and light distribution :OpticsDesigned tominimizehot spots&fringing indifferent applications. Power Input :ConstantDC24Vwith external driver, Surge Protection : Inbuilt surge protection in the driver 2KV4KV(Additional ifrequiredwillbeaddedaspertherequirement),Toughenedtransparentglass having the IK protection up to IK08, Painting : Chemical 3/7 tank processedtreatment before the powder coat black/ash/approved color coat. Fixture will besuitable to operate in a temperature range of 0°C to 50°C,Thelight fixturesarehaving IP68air ventmadeof stainless steelwhichhelps todesiccate&prevent fromformingmoisture inside the light fixture at worst environmental condition. LED lifeshouldbeat least 50,000burninghours at L70 at 35degreecentigrade. Luminaire isinclusiveof Integral male/female waterproof connectorswith structures inprewiredconditionsasper ISstandard.PCBthicknessmustbe1.6mm,35micronCopper,2WTCwithBlack orWhitemasking, Copper /OSP finish. LM79, IK07, IP66, NABLAcrediatedlaboratory.LEDMakesshouldbeCREE,LumilLED,Osram,Seoul,Nichiaorequivalentwiththeengineeror3rdpartytestinglaboratoryapproval.PowerLoopIn/OutalongwithIP67connector having the length >300mm. |
| 153 | SITC of high quality long through monocolor Linearwashlight, ProtectionRating: IP66,complying toBIS standard \\"IS 10322 (Part 5/Sec 1): 2012\\" andhavingCEcertificationagainststandard\\"LowVoltageDirective&ProtectiveEquipment-EN60598-1:2015\\",and\\"Electromagnetic Compatibility Directive-EN 61547: 2009\\", Mounting Structure :Adjustablesurfacemountyokearrangements for fixingthe lights.Power consumption:24W, CCT:1800K/3000K/4000K/6000K, (asperthedesignapproval),Optics:PMMAwithholder,BeamAngle:15º/25º/45º/60º,Control :ON/OFF,Body :Diecasted/extrudedaluminiumwith embossedmanufacturer logo, Hot spot and light distribution : OpticsDesigned to minimize hot spots & fringing in different applications. Power Input : |
| 154 | SITC of high quality long through mono color wash light, Protection Rating : IP66,complying toBIS standard \\"IS 10322 (Part 5/Sec 1): 2012\\" andhavingCEcertificationagainststandard\\"LowVoltageDirective&ProtectiveEquipment-EN60598-1:2015\\",and\\"Electromagnetic Compatibility Directive-EN 61547: 2009\\", Mounting Structure :Adjustable surfacemount yoke arrangements for fixing the lights having the rotationdegrees embosed in the die cast. Power consumption : 100W, CCT :1800K/3000K/4000K/6000K, (as per the design approval), Optics : PMMAwith holder,BeamAngle:15º/25º/45º/60º,Control :ON/OFF,Body:Diecasted/extrudedaluminiumwithembossedmanufacturer logo,Hot spot and light distribution :OpticsDesigned tominimizehot spots&fringing indifferent applications. Power Input :ConstantDC24Vwith external driver, Surge Protection : Inbuilt surge protection in the driver 2KV4KV(Additional ifrequiredwillbeaddedaspertherequirement),Toughenedtransparentglass having the IK protection up to IK08, Painting : Chemical 3/7 tank processedtreatment before the powder coat black/ash/approved color coat. Fixture will besuitable to operate in a temperature range of 0°C to 50°C,Thelight fixturesarehaving IP68air ventmadeof stainless steelwhichhelps todesiccate&prevent fromformingmoisture inside the light fixture at worst environmental condition. LED lifeshouldbeat least 50,000burninghours at L70 at 35degreecentigrade. Luminaire isinclusiveof Integral male/female waterproof connectorswith structures inprewiredconditionsasper ISstandard.PCBthicknessmustbe1.6mm,35micronCopper,2WTCwithBlack orWhitemasking, Copper /OSP finish. LM79, IK07, IP66, NABLAcrediatedlaboratory.LEDMakesshouldbeCREE,LumilLED,Osram,Seoul,Nichiaorequivalentwiththeengineeror3rdpartytestinglaboratoryapproval.PowerLoopIn/OutalongwithIP67connector having the length >300mm. |
| 155 | SITC of high quality long through mono color wash light, Protection Rating : IP66,complying toBIS standard \\"IS 10322 (Part 5/Sec 1): 2012\\" andhavingCEcertificationagainststandard\\"LowVoltageDirective&ProtectiveEquipment-EN60598-1:2015\\",and\\"Electromagnetic Compatibility Directive-EN 61547: 2009\\", Mounting Structure :Adjustable surfacemount yoke arrangements for fixing the lights having the rotationdegrees embosed in the die cast. Power consumption : 50W, CCT :1800K/3000K/4000K/6000K, (as per the design approval), Optics : PMMAwith holder,BeamAngle:15º/25º/45º/60º,Control :ON/OFF,Body:Diecasted/extrudedaluminiumwithembossedmanufacturer logo,Hot spot and light distribution :OpticsDesigned tominimizehot spots&fringing indifferent applications. Power Input :ConstantDC24Vwith external driver, Surge Protection : Inbuilt surge protection in the driver 2KV4KV(Additional ifrequiredwillbeaddedaspertherequirement),Toughenedtransparentglass having the IK protection up to IK08, Painting : Chemical 3/7 tank processedtreatment before the powder coat black/ash/approved color coat. Fixture will besuitable to operate in a temperature range of 0°C to 50°C,Thelight fixturesarehaving IP68air ventmadeof stainless steelwhichhelps todesiccate&prevent fromformingmoisture inside the light fixture at worst environmental condition. LED lifeshouldbeat least 50,000burninghours at L70 at 35degreecentigrade. Luminaire isinclusiveof Integral male/female waterproof connectorswith structures inprewiredconditionsasper ISstandard.PCBthicknessmustbe1.6mm,35micronCopper,2WTCwithBlack orWhitemasking, Copper /OSP finish. LM79, IK07, IP66, NABLAcrediatedlaboratory.LEDMakesshouldbeCREE,LumilLED,Osram,Seoul,Nichiaorequivalentwiththeengineeror3rdpartytestinglaboratoryapproval.PowerLoopIn/OutalongwithIP67connector having the length >300mm. |
| 156 | SITC of high quality long through mono color Linear washlight, Protection Rating: IP66,complying toBIS standard \\"IS 10322 (Part 5/Sec 1): 2012\\" andhavingCEcertificationagainststandard\\"LowVoltageDirective&ProtectiveEquipment-EN60598-1:2015\\",and\\"Electromagnetic Compatibility Directive - EN 61547: 2009\\", Mounting Structure :Adjustablesurfacemountyokearrangements for fixingthe lights.Power consumption:24W, CCT:1800K/3000K/4000K/6000K, (asperthedesignapproval),Optics:PMMAwithholder,BeamAngle:15º/25º/45º/60º,Control :ON/OFF,Body :Diecasted/extrudedaluminiumwith embossedmanufacturer logo, Hot spot and light distribution : OpticsDesigned tominimize hot spots & fringing in different applications. Power Input :ConstantDC24Vwithexternaldriver, SurgeProtection: Inbuilt surgeprotection inthedriver2KV-4KV(Additional if requiredwillbeaddedasper therequirement),Toughenedtransparent glass having the IK protection up to IK07, Painting : Chemical 3/7 tankprocessedtreatmentbeforethepowdercoatblack/ash/approvedcolorcoat.Fixturewillbe suitable to operate in a temperature range of 0°C to 50°C,The light fixturesarehavingIP68airventmadeofstainlesssteelwhichhelpstodesiccate&prevent fromformingmoisture inside the light fixture at worst environmental condition. LED lifeshouldbeat least 50,000burninghours at L70 at 35degreecentigrade. Luminaire isinclusiveof Integral male/female waterproof connectorswith structures inprewiredconditionsasper ISstandard.PCBthicknessmustbe1.6mm,35micronCopper,2WTCwithBlackorWhitemasking,Copper/OSPfinish.LM79, IK07, IP66,HVCertificatesfromNABL Acrediated laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalentwiththeengineeror3rdpartytestinglaboratoryapproval.PowerLoopIn/Outalong with IP67 connector having the length >300mm. |
| 157 | SITC of high quality long throughmono color wash light, Protection Rating : IP66,complying toBIS standard \\"IS 10322 (Part 5/Sec 1): 2012\\" andhavingCEcertificationagainststandard\\"LowVoltageDirective&ProtectiveEquipment-EN60598-1:2015\\",and\\"Electromagnetic Compatibility Directive-EN 61547: 2009\\", Mounting Structure :Adjustable surfacemount yoke arrangements for fixing the lights having the rotationdegrees embosed in the die cast. Power consumption : 100W, CCT :1800K/3000K/4000K/6000K, (as per the design approval), Optics : PMMAwith holder,BeamAngle:15º/25º/45º/60º,Control :ON/OFF,Body:Diecasted/extrudedaluminiumwithembossedmanufacturer logo,Hot spot and light distribution :OpticsDesigned tominimizehot spots&fringing indifferent applications. Power Input :ConstantDC24Vwith external driver, Surge Protection : Inbuilt surge protection in the driver 2KV4KV(Additional ifrequiredwillbeaddedaspertherequirement),Toughenedtransparentglass having the IK protection up to IK08, Painting : Chemical 3/7 tank processedtreatment before the powder coat black/ash/approved color coat. Fixture will besuitable to operate in a temperature range of 0°C to 50°C,Thelight fixturesarehaving IP68air ventmadeof stainless steelwhichhelps todesiccate&prevent fromformingmoisture inside the light fixture at worst environmental condition. LED lifeshouldbeat least 50,000burninghours at L70 at 35degreecentigrade. Luminaire isinclusiveof Integral male/female waterproof connectorswith structures inprewiredconditionsasper ISstandard.PCBthicknessmustbe1.6mm,35micronCopper,2WTCwithBlack orWhitemasking, Copper /OSP finish. LM79, IK07, IP66, NABLAcrediatedlaboratory.LEDMakesshouldbeCREE,LumilLED,Osram,Seoul,Nichiaorequivalentwiththeengineeror3rdpartytestinglaboratoryapproval.PowerLoopIn/OutalongwithIP67connector having the length >300mm. |
| 158 | SITC of high quality long through mono color wash light, Protection Rating : IP66,complying toBIS standard \\"IS 10322 (Part 5/Sec 1): 2012\\" andhavingCEcertificationagainststandard\\"LowVoltageDirective&ProtectiveEquipment-EN60598-1:2015\\",and\\"Electromagnetic Compatibility Directive-EN 61547: 2009\\", Mounting Structure :Adjustable surfacemount yoke arrangements for fixing the lights having the rotationdegrees embosed in the die cast. Power consumption : 50W, CCT :1800K/3000K/4000K/6000K, (as per the design approval), Optics : PMMAwith holder,BeamAngle:15º/25º/45º/60º,Control :ON/OFF,Body:Diecasted/extrudedaluminiumwithembossedmanufacturer logo,Hot spot and light distribution :OpticsDesigned tominimizehot spots&fringing indifferent applications. Power Input :ConstantDC24Vwith external driver, Surge Protection : Inbuilt surge protection in the driver 2KV4KV(Additional ifrequiredwillbeaddedaspertherequirement),Toughenedtransparentglass having the IK protection up to IK08, Painting : Chemical 3/7 tank processedtreatment before the powder coat black/ash/approved color coat. Fixture will besuitable to operate in a temperature range of 0°C to 50°C,Thelight fixturesarehaving IP68air ventmadeof stainless steelwhichhelps todesiccate&prevent fromformingmoisture inside the light fixture at worst environmental condition. LED lifeshouldbeat least 50,000burninghours at L70 at 35degreecentigrade. Luminaire isinclusiveof Integral male/female waterproof connectorswith structures inprewiredconditionsasper ISstandard.PCBthicknessmustbe1.6mm,35micronCopper,2WTCwithBlack orWhitemasking, Copper /OSP finish. LM79, IK07, IP66, NABLAcrediatedlaboratory.LEDMakesshouldbeCREE,LumilLED,Osram,Seoul,Nichiaorequivalentwiththeengineeror3rdpartytestinglaboratoryapproval.PowerLoopIn/OutalongwithIP67connector having the length >300mm. |
| 159 | SITC of high quality long through monocolor Linear washlight, Protection Rating: IP66,complying toBIS standard \\"IS 10322 (Part 5/Sec 1): 2012\\" andhavingCEcertificationagainststandard\\"LowVoltageDirective&ProtectiveEquipment-EN60598-1:2015\\",and\\"Electromagnetic Compatibility Directive-EN 61547: 2009\\", Mounting Structure :Adjustablesurfacemountyokearrangements for fixingthe lights.Power consumption:36W, CCT:1800K/3000K/4000K/6000K, (asperthedesignapproval),Optics:PMMAwithholder,BeamAngle:15º/25º/45º/60º,Control :ON/OFF,Body :Diecasted/extrudedaluminiumwith embossedmanufacturer logo, Hot spot and light distribution : OpticsDesigned tominimize hot spots & fringing in different applications. Power Input :ConstantDC24Vwithexternaldriver, SurgeProtection: Inbuilt surgeprotection inthedriver2KV-4KV(Additional if requiredwillbeaddedasper therequirement),Toughenedtransparent glass having the IK protection up to IK07, Painting : Chemical 3/7 tankprocessedtreatmentbeforethepowdercoatblack/ash/approvedcolorcoat.Fixturewillbe suitable to operate in a temperature range of 0°C to 50°C,The light fixturesarehavingIP68airventmadeofstainlesssteelwhichhelpstodesiccate&prevent fromformingmoisture inside the light fixture at worst environmental condition. LED lifeshouldbeat least 50,000burninghours at L70 at 35degreecentigrade. Luminaire isinclusiveof Integral male/female waterproof connectorswith structures inprewiredconditionsasper ISstandard.PCBthicknessmustbe1.6mm,35micronCopper,2WTCwithBlackorWhitemasking,Copper/OSPfinish.LM79, IK07, IP66,HVCertificatesfromNABL Acrediated laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalentwiththeengineeror3rdpartytestinglaboratoryapproval.PowerLoopIn/Outalong with IP67 connector having the length >300mm. |
| 160 | SITC of high quality MonoColor Neon Flexible light,Protection Rating : IP65,MountingStructure:AdjustablewallmountSSclipsforfixingthelights.Powerconsumption:10W,CCT:3000k,(asperthedesignapproval)BeamAngle:120º, Power Input :DC24Vwithexternaldriver, SurgeProtection: Inbuiltsurgeprotection2KV-4KV(Additional ifrequiredwill be added as per the requirement), Fixturewill be suitable to operate in atemperature range of 0°C to 50°C ,LEDlifetimeshouldbeat least50,000burninghours at L70 at 25degree centigrade. Luminaire is inclusiveof Integral male/femalewaterproof connectorswith structures inprewiredconditions as per IS standard. LEDMakes shouldbeCREE, LumilLED,Osram, Seoul, Epistar,Nichiaor equivalentwith theengineer or 3rd party testing laboratory approval. |
| 161 | SITC of Aluminium Profile for Neon flex |
| 162 | SITC of high quality long through mono color wash light, Protection Rating : IP66,complying toBIS standard \\"IS 10322 (Part 5/Sec 1): 2012\\" andhavingCEcertificationagainststandard\\"LowVoltageDirective&ProtectiveEquipment-EN60598-1:2015\\",and\\"Electromagnetic Compatibility Directive-EN 61547: 2009\\", Mounting Structure :Adjustable surfacemount yoke arrangements for fixing the lights having the rotationdegrees embosed in the die cast. Power consumption : 50W, CCT :1800K/3000K/4000K/6000K, (as per the design approval), Optics : PMMAwith holder,BeamAngle:15º/25º/45º/60º,Control :ON/OFF,Body:Diecasted/extrudedaluminiumwithembossedmanufacturer logo,Hot spot and light distribution :OpticsDesigned tominimizehot spots&fringing indifferent applications. Power Input :ConstantDC24Vwith external driver, Surge Protection : Inbuilt surge protection in the driver 2KV4KV(Additional ifrequiredwillbeaddedaspertherequirement),Toughenedtransparentglass having the IK protection up to IK08, Painting : Chemical 3/7 tank processedtreatmentbeforethepowdercoatblack/ash/approvedcolorcoat.Fixturewillbesuitableto operate in a temperature range of 0°C to 50°C,ThelightfixturesarehavingIP68airventmadeofstainlesssteelwhichhelpstodesiccate&preventfromformingmoistureinside the light fixtureat worst environmental condition. LED life shouldbeat least50,000burninghoursat L70at 35degreecentigrade. Luminaire is inclusiveof Integralmale/female waterproof connectorswith structures inprewired conditions as per ISstandard.PCBthicknessmustbe1.6mm,35micronCopper,2WTCwithBlackorWhitemasking,Copper/OSPfinish. LM79, IK07, IP66,NABLAcrediated laboratory. LEDMakesshouldbeCREE,LumilLED,Osram, Seoul,Nichiaorequivalentwiththeengineeror3rdparty testing laboratoryapproval.Power Loop In/Outalongwith IP67connectorhavingthe length >300mm. |
| 163 | SITC of high quality long through monocolor 2Feet Linear washlight, Protection Rating:IP66,complyingtoBISstandard\\"IS10322(Part5/Sec1):2012\\"andhavingCEcertificationagainststandard\\"LowVoltageDirective&ProtectiveEquipment-EN60598-1:2015\\",and\\"Electromagnetic Compatibility Directive-EN 61547: 2009\\", Mounting Structure :Adjustablesurfacemountyokearrangements for fixingthe lights.Power consumption:36W, CCT:1800K/3000K/4000K/6000K, (asperthedesignapproval),Optics:PMMAwithholder,BeamAngle:15º/25º/45º/60º,Control :ON/OFF,Body :Diecasted/extrudedaluminiumwith embossedmanufacturer logo, Hot spot and light distribution : OpticsDesigned to minimize hot spots & fringing in different applications. Power Input : Items Makes/Model Unit Qty Unit rate Amount RemarksConstantDC24Vwithexternaldriver, SurgeProtection: Inbuiltsurgeprotectioninthedriver2KV-4KV(Additional if requiredwillbeaddedasper therequirement),Toughenedtransparent glass having the IK protection up to IK07, Painting : Chemical 3/7 tankprocessedtreatmentbeforethepowdercoatblack/ash/approvedcolorcoat.Fixturewillbe suitable to operate in a temperature range of 0°C to 50°C,The light fixturesarehavingIP68airventmadeofstainlesssteelwhichhelpstodesiccate&prevent fromformingmoisture inside the light fixture at worst environmental condition. LED lifeshouldbeat least 50,000burninghours at L70 at 35degreecentigrade. Luminaire isinclusiveof Integral male/female waterproof connectorswith structures inprewiredconditionsasper ISstandard.PCBthicknessmustbe1.6mm,35micronCopper,2WTCwithBlackorWhitemasking,Copper/OSPfinish.LM79, IK07, IP66,HVCertificatesfromNABL Acrediated laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalentwiththeengineeror3rdpartytestinglaboratoryapproval.PowerLoopIn/Outalong with IP67 connector having the length >300mm. |
| 164 | SITC of high quality long through monocolor Linear washlight, Protection Rating: IP66,complying toBIS standard \\"IS 10322 (Part 5/Sec 1): 2012\\" andhavingCEcertificationagainststandard\\"LowVoltageDirective&ProtectiveEquipment-EN60598-1:2015\\",and\\"Electromagnetic Compatibility Directive-EN 61547: 2009\\", Mounting Structure :Adjustablesurfacemountyokearrangements for fixingthe lights.Power consumption:24W, CCT:1800K/3000K/4000K/6000K, (asperthedesignapproval),Optics:PMMAwithholder,BeamAngle:15º/25º/45º/60º,Control :ON/OFF,Body :Diecasted/extrudedaluminiumwith embossedmanufacturer logo, Hot spot and light distribution : OpticsDesigned tominimize hot spots & fringing in different applications. Power Input :ConstantDC24Vwithexternaldriver, SurgeProtection: Inbuilt surgeprotection inthedriver2KV-4KV(Additional if requiredwillbeaddedasper therequirement),Toughenedtransparent glass having the IK protection up to IK07, Painting : Chemical 3/7 tankprocessedtreatmentbeforethepowdercoatblack/ash/approvedcolorcoat.Fixturewillbe suitable to operate in a temperature range of 0°C to 50°C,The light fixturesarehavingIP68airventmadeofstainlesssteelwhichhelpstodesiccate&prevent fromformingmoisture inside the light fixture at worst environmental condition. LED lifeshouldbeat least 50,000burninghours at L70 at 35degreecentigrade. Luminaire isinclusiveof Integral male/female waterproof connectorswith structures inprewiredconditionsasper ISstandard.PCBthicknessmustbe1.6mm,35micronCopper,2WTCwithBlackorWhitemasking,Copper/OSPfinish.LM79, IK07, IP66,HVCertificatesfromNABL Acrediated laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalentwiththeengineeror3rdpartytestinglaboratoryapproval.PowerLoopIn/Outalong with IP67 connector having the length >300mm. |
| 165 | SITC of high quality long through monocolor Linear washlight, Protection Rating: IP66,complying toBIS standard \\"IS 10322 (Part 5/Sec 1): 2012\\" andhavingCEcertificationagainststandard\\"LowVoltageDirective&ProtectiveEquipment-EN60598-1:2015\\",and\\"Electromagnetic Compatibility Directive-EN 61547: 2009\\", Mounting Structure :Adjustablesurfacemountyokearrangements for fixingthe lights.Power consumption:24W, CCT:1800K/3000K/4000K/6000K, (asperthedesignapproval),Optics:PMMAwithholder,BeamAngle:15º/25º/45º/60º,Control :ON/OFF,Body :Diecasted/extrudedaluminiumwith embossedmanufacturer logo, Hot spot and light distribution : OpticsDesigned tominimize hot spots & fringing in different applications. Power Input :ConstantDC24Vwithexternaldriver, SurgeProtection: Inbuilt surgeprotection inthedriver2KV-4KV(Additional if requiredwillbeaddedasper therequirement),Toughenedtransparent glass having the IK protection up to IK07, Painting : Chemical 3/7 tankprocessedtreatmentbeforethepowdercoatblack/ash/approvedcolorcoat.Fixturewillbe suitable to operate in a temperature range of 0°C to 50°C,The light fixturesarehavingIP68airventmadeofstainlesssteelwhichhelpstodesiccate&prevent fromformingmoisture inside the light fixture at worst environmental condition. LED lifeshouldbeat least 50,000burninghours at L70 at 35degreecentigrade. Luminaire isinclusiveof Integral male/female waterproof connectorswith structures inprewiredconditionsasper ISstandard.PCBthicknessmustbe1.6mm,35micronCopper,2WTCwithBlackorWhitemasking,Copper/OSPfinish.LM79, IK07, IP66,HVCertificatesfromNABL Acrediated laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalentwiththeengineeror3rdpartytestinglaboratoryapproval.PowerLoopIn/Outalong with IP67 connector having the length >300mm. |
| 166 | SITC of DC power driver for the above Lights, Power : 200W, Input :AC110-240VAC,50Hz, Output : DC 12/24V, Protection rating, IP67, Surge protection : LL 4KV, LE 6KV |
| 167 | SITC of IP driver box made up of PVC/UPV C for the internal terminations and externaloutgoing connecting points, with required PVC / brass glands for control outgoing circuits. |
| 168 | SITC of PVC insulated multi core electrical unarmored flexible 3Cx1.5 Sqmm powercable having less electrical losses.ThisPVCinsulatedandroundsheathedwirefeaturesabrightmulti strandscopperconductorsanditsupportsvoltagegradeupto1100V.(Asperactuals depending upon the site condition) |
| 169 | SITC of PVC insulated multi core electrical unarmored flexible 3Cx2.5 Sqmm powercable having less electrical losses.ThisPVCinsulatedandroundsheathedwirefeaturesabrightmulti strandscopperconductorsanditsupportsvoltagegradeupto1100V.(Asperactuals depending upon the site condition) |
| 170 | SITC of PVC insulated multi core electrical armored flexible 4Cx4Sqmm power cablehaving less electrical losses.ThisPVCinsulatedandroundsheathedwirefeaturesabrightmulti strandsaluminiumconductorsand it supports voltagegradeupto1100V. (Asperactuals depending upon the site condition) |
| 171 | SITC of Power Distribution Board made up of MS Sheet metal fabricated housing blackpowdercoatedand iveryconnectors for the internal terminationsandexternaloutgoingconnectingpoints, fibre/brass glands of suitable size fittedMCBcontrol for outgoingcircuits. Timer with required contactor for auto switching. Power panel suitable forindoor/outdoor applicable and floor mount / wall mount options.- 12 Nos of 6/10A SP Outgoing MCB's.- 1No of 32A TPN Incoming MCB. |
| 172 | Providing earthing with galvanised iron earth plate, Earthing pipe, GI earthingwire,complete with all materials, testing and recording. |
| 173 | SITC and fixing of PVC conduit pipe on surface 25mmDia (Medium) with accessories,junction box etc. including clamping etc |
| 174 | Earth Excavation Work for cable laying. |
| 175 | SITC of 50mm outsidedia.double wall corrugated pipes(DWC) for enclosing cable belowground/roadsurface,torequireddepthcompleteforbothpowerandDmx.(Asperactualsdepending upon the site condition) |
| 176 | SITC of additional accessories for installing the lights as per the final drawing/siteconditionconsistingofclamps,brackets,angles, joints,hardware's likefasteners,nut&bolts etc., Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 13, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 days
Jul 09, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedJul 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender