Tender For Provision Of Ladies Washroom In Building P-15 At Cfees, Construction Of Temporary Living Accommodation For Security Personnel Of Mhsu (I) Metcalfe House, Provision Of Interlocking Tiles With Drainage Behind Mes Main Receiving Ht Sub Statio
Tender Value
40.76 Lakhs
Estimated cost
Bid Submission
11 Jul 2026
5 days left
EMD
81520
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Ladies Washroom In Building P-15 At Cfees, Construction Of Temporary Living Accommodation For Security Personnel Of Mhsu (I) Metcalfe House, Provision Of Interlocking Tiles With Drainage Behind Mes Main Receiving Ht Sub Station, Addition/Alteration Of Lt Distribution System At Main Gate, Reception And Security Office Of Sspl And Installation Of Lightening Protection System Of Main Building And Technical Building At Dipr Under Ge (I) R&D Delhi
BOQ
| Sl. No. | Item Description |
| 1 | Excavation as in trenches in any kind of soil not exceeding 1.5 metres wide and not exceeding 1.5 metres deep lines and getting out complete all as specified and directed by Engineer-in-Charge. |
| 2 | M&L Returning filling in hard/dense soil, in trenches and floor level raising etc including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick, complete all as specified and directed. |
| 3 | Removing excavated earth/Malba to a distance exceeding 1.5 km and not exceeding 5 km depositing where directed at a level not exceeding 1.50m above the starting point complete all as specified and as directed. |
| 4 | M&L for cement concrete type D-2 (1:4:8) (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed. |
| 5 | M & L Hardcore of gauge n.exc 63mm broken bricks deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface of broken stone or boulders complete all as specified and directed. |
| 6 | M&L for Damp proof course 40 mm thick to horizontal or vertical surfaces including necessary formwork in cement concrete (1:2:4), type B-0 (using 12.50mm graded stone aggregate) complete all as specified and directed. |
| 7 | M&L for RCC design mix M-25 as in plinth beams, roof beams,cantilevers, lintel beams over 1.5 metre span etc complete all as specified and directed by Engineer-in-Charge. |
| 8 | M&L for formwork to sides of soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilever shelves for for fair finishes surfaces of concrete complete all as specified and directed by Engineer-in-Charge |
| 9 | S&F mild steel TMT bars 10mm dia and over, cut to length & bent to shape required including cranking, bending spirally for hooping for column, hooking ends & binding with and including mild steel wire (annealed) not less than on 0.9mm dia or securing with clips including binding of bars for beams, footings, slabs etc complete all as specified. |
| 10 | Demolition of brick or stone masonry built in cement mortar incl all quoins, arches, pillar etc. complete complete all as specified and directed. |
| 11 | Material and labour for brick work with sub class ‘B’ bricks of class designation 7.5 all as per IS-1077-1992 (minimum compressive strength of brick 75 kg / Sqcm) old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 12 | Taking down cement plaster any description on brick/concrete surfaces etc including raking out joints hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 13 | M&L 15mm thick rendering in cement mortar (1:6) on fair faces of new or old brick works or concrete work finished even & smooth without using extra cement complete all as specified and as directed. |
| 14 | M&L 15mm thick rendering in cement mortar (1:4) on other than fair faces of new or old brick work or concrete work, finished even & smooth without using extra cement complete all as specified and as directed. |
| 15 | M&L preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper (white or tinted) over a coat of alkali resistant primer complete all as specified and directed. |
| 16 | M&L preparation of newly plastered surfaces of walls including all cornices, pilasters etc and applying applying Two or more coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer complete all as specified |
| 17 | M&L for Complete removal of existing treatment including preparation of plastered or unplastered old decorated surfaces of walls incl pillasters and cornices etc. incl washing, rubbing down and stopping the previously treated surfaces and applying two coats of oil emulsion distemper of approved shade/tint over and including one coat of 1 mm thick birla wall care putty to achieve smooth finish complete complete all as specified and directed. |
| 18 | M&L for Complete removal of existing treatment including preparation of plastered or unplastered old decorated surfaces of walls incl pillasters and cornices etc. incl washing, rubbing down and stopping the previously treated surface and applying Material & Labour for applying Two or more coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer complete all as specified. |
| 19 | S &F structural steel work in tubular trusses, posts, purlins, rafters, framed work in truss etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 complete all as specified. |
| 20 | M & L mild steel work for flat iron fillets as in wind ties for roof coverings including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified. |
| 21 | Dismantling of Asbestos cement (corrugated semicorrugated etc ) sheets in roof covering complete all as specified . |
| 22 | Supply and fixing Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, cladding to wall, ridges etc. fixed all as per manufactures's instructions and fixed with self thread making steel screws of length not less than 50mm complete all as specified & directed by Engineer-in-Charge |
| 23 | M&L for Preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer, fixed complete all as specified and directed. |
| 24 | Dismantling false ceiling, boarding any type on wall / ceiling, aluminium/ Gypsum partitions, doors, windows, fixed glazing including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-Charge. |
| 25 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid with inbuilt designer groove of hot dipped galvanized steel sections consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \\"T\\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \\"T\\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture having 8 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-Charge. |
| 26 | S&F anodised aluminium powder coating aluminium section weighing not less than 0.55Kg/m {minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified |
| 27 | S & F Powder coated aluminium door shutters,aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges,anodised aluminium snap beading screws, and all necessary builder hardware etc. complete all as specified and directed |
| 28 | S&F Powder Coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws and all necessary builder hardware etc. complete all as specified |
| 29 | S&F 12 mm thick pre-laminated particle board exterior grade with decorative prelaminated both sides of approved shades fixed to aluminium shutters/partitions etc complete all as specified and as directed. |
| 30 | S&F in repair 4.8 mm thick sheet glass ordinary quality,fixing by means of glazing pins and rubber beading etc in aluminium partitions, windows, doors etc complete all as specified and as directed. |
| 31 | S&F designer glass film of approved pattern 25 micron reflective type with designer etching, LOGO of labs etc and similar work stuck to glass panes of doors, windows, partitions etc as per manufacturer's instructions complete all as specified and as directed. |
| 32 | S&F door closer hydraulically regulated, aluminium body designation No 3, universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 33 | Dismantling of floor hearth or wall tiling incl cement mortar bedding (but not backing)removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 34 | M & L non skid coloured tiles 400mm X 400mm X 7mm thick as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20mm thick cement screeding in CM (1:6) complete all as specified and directed. |
| 35 | Material and labour for providing glazed ceramic designer coloured tiles of size 450mmx300mmx 7 to 8 mm thick on vertical surface as in skirting/dado set and jointed in neat cement slurry and pointing in white or coloured cement to match the surface of tiles over and including 10mm thick rendering in cement mortar (1:4) on brick wall complete all as specified and directed. |
| 36 | M&L for Vitrified Ceramic (light shade) tiles 8 to 9 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry, over and including 15 mm thick screed bed in CM (1:6) and pointed in white or coloured cement to match complete all as specified & as directed. |
| 37 | S & F vitreous china pedestal pattern, \\"EWC\\" white with connection to trap, and to flushing pipe anti-syphonage pipe and including pvc sheet cover and CP jet and flush pipe/L bend etc. complete including making good to floor, set with cement concrete, fixed as in repairs complete all as specified and directed. |
| 38 | Supply and fixing vitreous china squatting pan \\"Orissa\\" pattern size 580mm x 440mm, white, with integral footrest (excluding flushing cistern) including connection to trap,and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor, set with cement concrete, fixed as in repairs complete all as specified and directed. |
| 39 | Supply and fixing PVC valveless syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection and 32mm dia PVC bend for required squat pattern etc, set with concrete and making good to floor, fixed as in repairs complete complete all as specified and directed. |
| 40 | M&L machine cut Granite slab 15 mm thick fixed as in steps, pillars, skirting/dado, window cills, cooking platforms, wash basin platforms and like and incl 10mm thick (avg thickness) cement mortar 1:4 screeding and setting coat in cement morter 1:2, 3mm thick, set and jointed with white/coloured cement to match the shade of slab incl cutting, waste, rubbing and polishing etc complete all as specified and directed. Note:- (i) The rate of granite stone shall be deemed to incl for full rounded off corner/edges incl all cutting to make it square or rectangular. (ii) The rate shall also be deemed to incl for cutting and polishing machine and granite polishing to achieve the desired granite finish complete all as specified and directed. |
| 41 | Supply & fixing vitreous china wash hand basin, white flat back, size 550mm x 400mm including CP pillar tap of chromium plated with capstan head with long screwed shanks and fly nuts, brass chromium plated waste coupling 32mm dia, with fly nuts, pvc waste pipe and MS brackets 25x25x5 mm thick incl cutting for and pinning in ends of brackets, fixed as in repairs complete complete all as specified and directed. |
| 42 | S&F soap dish chromium plated of size 100 x 100 mm any type, fixed with chromium plated brass screws complete all as specified. |
| 43 | Supply and fixing in repair 15mm dia PVC connection 450mm long with brass nut, complete all as specified and directed. |
| 44 | Supply and fixing long body Bib taps,chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed. |
| 45 | Supply and fixing angle stop valve, chromium plated,screwed down, high pressure with crutch or butterfly handle screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed. |
| 46 | Supply and fixing angle stop valve 2-in-1 type, chromium plated,screwed down, high pressure with crutch or butterfly handle screwed for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed. |
| 47 | S&F Toilet paper holder with flat recessed type stainless steel box type fixed to wall, with chromium plated brass screws, complete all as specified & directed. |
| 48 | S&F 100 mm dia mild steel chromium plated grating fixed as in repair complete all as specified and directed. |
| 49 | S&F 32mm dia PVC waste pipe for WHB 60cm long with union complete all as specified and directed. |
| 50 | S&F CP Health faucet with 1.50 m flexible chromium plated tube and hook fixed to angle valve 15mm bore with accessories complete all as specified and directed. |
| 51 | Supply and fixing brass chromium plated tubular towel rail 20mm dia 60 cm long between flanges, fixed to walls with necessary screws complete all as specified |
| 52 | Supply and fixing brass chromium plated tubular towel having dia of not less than 150mm fixed to walls with necessary screws complete all as specified |
| 53 | Providing and fixing CPVC Pipes 25 mm dia SDR 11 and Plain CPVC SDR 11 fittings on wall/ceiling or laying in floor as in concealed/open work including cutting chases in wall upto required depth and length including all necessary brass and plain fittings all as per direction of Engineer-in-Charge. |
| 54 | Providing and fixing CPVC Pipes 20 mm outer dia SDR 11 and Plain CPVC SDR 11 fittings on wall/ceiling or laying in floor as in concealed/open work including cutting chases in wall upto required depth and length including all necessary brass and plain fittings all as per direction of Engineerin-Charge. |
| 55 | Cutting chases, pinning in making good to facings where required & pointing in cement mortar1:3 to ends etc or edges of landings, steps cills,sunshades, shelves,lintels,etc and cutting chases for concealed water tubing and making good,cutting n.exc. 10cm girth in brick walls all as directed. |
| 56 | S&F rotational moulded polythene water storage tank (Cylindrical vertical with closed top ) hoisted and fixed in position 1000 ltrs capacity including disonnecting and refixing the CPVC pipe and fittings complete all as specified and directed. |
| 57 | Supply and fixing for frameless looking mirror 5.50mm thick of required size with bevelled edges and approved border design of selected quality glass,mounted on wall surfaces with fancy type SS screws having SS cover caps visible on mirror surface including Plastic protector cover for edges of looking mirror complete all as specified and directed by Engineer-in-Charge . |
| 58 | S & F factory made solid PVC door frame size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specification and directed. |
| 59 | S & F factory made solid panel PVC door shutter 30mm the style consisting of frame made out of MS tube, for top & bottom rail, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, bottom rail & lock rail on either side & as gap insert for top rail and bottom rail. panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement as per specification and directed. |
| 60 | Taking down chowkhats or frames with shutter (without taking off shutters from the frame) of size exc 1.5 sqm but not exc 4 sqm and making good to disturbed surface without any extra cost complete all as specified and directed. |
| 61 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exc 1.5sqm and making good to distrubed surface without any extra cost complete all as specified and directed. |
| 62 | S&F 100mm size butt hinges, medium weight cold rolled mild steel all as directed |
| 63 | S&F 150 mm long aluminium anodized barrel tower bolt of extruded section all as directed |
| 64 | S&F 150mm size aluminium handles cast type, anodized all as directed |
| 65 | S&F in repair 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed. |
| 66 | S&F in repair 110 mm bore PVC (SWR) bends with rubber ring joints complete all as specified and directed. |
| 67 | S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including clamps as required, fixed as in repair complete all as directed. |
| 68 | S&F 75mm dia PVC (SWR) bends with rubber ring joints fixed as required complete all as directed. |
| 69 | Removing Debris/ demolished materials by mechanical means including loading, transporting, unloading to outside MoD land up to any rise and lead complete as per direction of Engineer - in - charge. |
| 70 | S&F as in repairs CPVC gate valves 25mm bore fixed complete all as specified and as directed. |
| 71 | M&L for PVC (SWR) 150mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including demolition and breaking up existing unserviceable PVC pipe and removal of debris complete all as specified and directed by Engineer-in-Charge. |
| 72 | M&L for PCC (1:3:6) type C-2 (using 40 mm graded stone aggregates) as in bed to drain/ sewage pipe including packing under and haunching against the sides of pipes of 150 mm internal dia after they are laid and tested complete all as specified and directed by Engineer-in-Charge. |
| 73 | M&L Cutting into existing manhole for connecting into new drain, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or ¾ section), in cement concrete 1:2:4, type B-1, using 20mm graded stone aggregate, smooth finished and reforming benching as required for 150 mm bore SGSW / RCC pipe, complete all as directed. |
| 74 | M&L Surface excavation in any kind of soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out surplus soil from outside MoD Land complete all as directed. |
| 75 | Material & Labour for 100 mm thick cement concrete type D-2,1:4:8 (40mm graded stone aggregates) as in sub base concrete complete all as specified and directed. |
| 76 | M & L for Factory made Rubber moulded precast concrete interlocking paver block coloured and pre-polished of premium quality, any shape, size and color with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness M-35 Grade, laying in any design and pattern over and including 50 mm sand cushioning complete all as directed. |
| 77 | Supply and fixing factory made prepolished chequered cement concrete prepolished coloured tiles (300mmx 300mm x 22 to 25mm thick, set jointed and pointed in neat cement slurry with grey cement mixed with pigment to match the colour of tiles, laid over and incl 20mm thick screed bed in CM 1:4, complete complete all as specified and directed. |
| 78 | Demolition of cement concrete in ground floors and pavings etc not exc 15 cm thick above or below ground level complete all as specified and directed. |
| 79 | M&L for brick work straight or curved on plan exc 6m mean radius in cement mortar (1:6) with Sub class ‘B’ brick including manhole raising, footpath, etc complete all as specified and as directed by Engineer-in-Charge. |
| 80 | M&L for PCC type B1 (1:2:4) (using 20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneeler apexstone, bed plates, including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 81 | Demolition of reinforced cement concrete as in RCC slabs, beams, drain slabs or manhole covers of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 82 | S&F Factory made precast heavy duty drain/ manhole covers including MS frame and including reinforcement as per IS 12592 : 2002 with specified thickness of different required size as per site complete all as specified and directed by Engineer-in-Charge. |
| 83 | M&L for RCC work (Nominal Mix) (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in slabs supported on walls, man hole cover ,drain covers with perforated hole, Shelves etc and like complete all as specified and as directed. |
| 84 | Use and waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick surface flat for rough finished surface of concrete complete all as specified. |
| 85 | Desilting and cleaning of open drains of any section manually including desilting soild/semi solid materials of any type vegetation growth and removal of sludge upto a distance exc 5.00 km from the edges of drains etc complete all as specified and directed by Engineer-in-Charge. |
| 86 | Material & labour plain cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified. |
| 87 | M&L rendering 10mm thick in cement mortar (1:6) on brick on concrete surfaces surfaces finished even and smooth without using extra cement complete all as directed. |
| 88 | M&L for PCC type B1 (1:2:4) (using 20mm graded agg) in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelersm apexstone, bed plates, including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 89 | M & L for Reinforced cement concrete M-25 (design mix)in Walls, retaining walls,basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses concrete complete all as directed. |
| 90 | M & L for Reinforced cement concrete M-25 (design mix) Foundations, including rafts, footings, foundation beams; plinth beams; columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as directed. |
| 91 | Material & Labour for pressed steel frames for doors of size 125 x 60 mm for doors with one or more rebate incl necessary fixing lugs, hinges, lock, strike plates welded with frame and making arrangement for fixing of door spring etc complete all as directed. |
| 92 | PCC (1:3:6) type C1 using 20mm graded stone aggregate as in filling hollow of pressed steel frame. |
| 93 | S&F 30mm thick flush shutter solid core construction with block board core and ply wood face panels commercial type on both sides all as directed. |
| 94 | Material & Labour prepapration of new or previously untreated surfaces of wood or based materials of any description not otherwise described, over 10cm width or girth & applying two coats of synthetic enamel paint coat complete all as directed. |
| 95 | S&F Fiber glass reinforced plastic(FRP) door frame of cross section 90 mm X 45 mm having single reveted of 32 mm X 15 mm to receive shutters of 30 mm thickness.The laminate shall be moulded with fire resistsnt grade unsaturated polyester resin and chopped mat.Door frame shall be laminated 2 mm thick and shall be filled with suitable wooden block in all the three legs.Frame shall be covered with fiber glass from all sides.MS stay shall be provided at th bottom to steady the frame all as specified and directed. |
| 96 | S&F to existing door frames 30 mm thick FRP panelled door shutter of required colour and approved brand and manufacture,made with fire-retardant grade unsaturated polyster resin,moulded to 3 mm thick FRP laminate for forming hollow rail and style with wooden frame and suitable block of seasoned wood in side the required place for fixing of fittings,cast monolothically with 5 mm thick FRP laminate for panells confirming to IS:14856 all as specified and directed. |
| 97 | S&F 100mm size butt hinges, medium weight cold rolled mild steel all as directed |
| 98 | S&F 150 mm long aluminium anodized barrel tower bolt of extruded section all as directed |
| 99 | S&F 150mm size aluminium handles cast type, anodized all as directed |
| 100 | S&F 250mm long aluminium alloy anodized sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy all as directed |
| 101 | Dismantling boarding, any description, fixed in any position with nails complete all as specified |
| 102 | M&L for non-skid joint free coloured ceramic tiles 7 to 8 mm thick, (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed |
| 103 | M&L for non-skid joint free coloured ceremic tiles 7 to 8 mm thick, (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting/dado etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 10 mm thick screed bed or bedding layer in CM (1:4) complete all as specified and directed |
| 104 | M&L for vitrified ceramic tiles 9 to 10 mm thick, in light shade, (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed |
| 105 | M&L for vitrified ceremic tiles 9 to 10 mm thick, in light shade, (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in skirting/dado etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 10 mm thick screed bed or bedding layer in CM (1:4) complete all as specified and directed |
| 106 | S&F in repairs Vitreous China urinals, bowl type(back or corner wall type) ofsize 465mmX355mmX265 mm,complete including providing and fixing plugs,bedding urinal against wall in Cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws,pointing around urinal back in cement; fixing automatic flushing cistern with brackets,flush pipe,grating and Union for discharge pipe. complete all as specified and directed. |
| 107 | S&F in repair 15mm dia brass chromium plated pillar tap(swan neck) fancy type with fly nut capstan head screwed complete all as specified and directed. |
| 108 | S&F in repairs 15mm dia bib tap cast copper alloy but fancy type chromium plated long body complete all as specified and directed. |
| 109 | S&F in repairs 15 mm dia angle valve chromium plated brass complete all as specified and directed. |
| 110 | S&F in repairs 600mm x 450mm x 5 mm thick bevelled edge looking mirror of selected quality glass with aluminium frame of channel all round mounted on 4 mm thick commercial ply or AC building board fitted to wooden plug with CP brass screws complete all as specified and directed. |
| 111 | S&F in repairs PVC connection 15 mm dia 45 cm length with 2 Nos PTMT check nuts with washer complete all as specified and directed. |
| 112 | Supply and laying HDPE (DWC) sewage pipes 150 mm outer dia stiffner clean and PE materials double wall corrugated on external surfaces and smooth surfaces inside including fittings such as bend,tee,end caps,sealing rings etc conforming to IS -14930 all as specified and directed. |
| 113 | Cutting into existing manhole for connecting new drain pipe of 150mm bore SGSW pipe including making good to pipe and rendering, cutting out existing benching for and forming metreing branch channel in cement concrete (1:2:4) type B-1 smooth finished complete all as specified and as directed. |
| 114 | M&L for point wiring surface / concealed with PVC insulated unsheathed FRLS wire 1.5 sqmm multi stranded two single copper conductor cable passing through in pvc conduit pipe/ PVC casing capping complete with all accessories and with 1.5 sqmm PVC insulated copper cable FRLS as earth wire with recessed mounting GI sheet box with cover plate suitable for modular switch of adequate size including cutting chases in wall where required for inserting new conduit being included and making good the disturbed surface to match with the existing complete directed for followings :- |
| 115 | (a) One light/ fan point controlled by one switch with copper cables 1.5 sqmm size. |
| 116 | (b) One 3 pin socket outlet on independent board. |
| 117 | (c) One 3 pin socket outlet on same board. |
| 118 | All as per item No 114.00 here in before but for one socket point out let 3 pin 15 Amp with 2.5 sqmm PVC copper conductor FRLSand 2.5 sqmm PVC insulated copper conductor FRLSH as earth continuity conductor. |
| 119 | Supply and fixing in replacement of modular switch single pole one way 6 Amps 1 module complete all as specified and directed. |
| 120 | Supply and fixing of modular switch single pole one way 16/20 Amps 1 module complete all as specified and directed. |
| 121 | M&L in of modular socket 6A/16AMP 3/5 pin combined 2 module complete all as specified and directed. |
| 122 | M&L of modular socket 6 A-2/3 pin combined 2 module complete all as specified and directed. |
| 123 | S&F of ceiling rose, surface bakelite 65mmx50mm three terminals complete all as specified and as directed. |
| 124 | S & F of electronic fan regulator 2 module 240 V 5step type single pole complete all as specified and directed . Please Enable Macros to View BoQ information |
| 125 | S & F of electronic fan regulator 2 module 240 V 5step type single pole complete all as specified and directed . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender