|
| 1 | Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 2 | M&L hard core of broken Bricks of gauge n exc 63mm deposited, spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface all as specified and directed. |
| 3 | M&L PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation filling, sub base and mass concrete complete all as specified and directed. |
| 4 | Dismantling of tiles/stone slabs of any description or thickness, laid dry or laid dry and pointed in floors, aprons etc complete all as specified and directed. |
| 5 | M & L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 6 | M&L 50 mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection/ hard standing finishing even & fair without using extra cement laid in bays with construction, 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 gde and three part of sand ( all by weight) complete all as specified and directed. |
| 7 | M&L PCC 1:5:10 type E-2 (using 40mm graded stone aggregate) as in foundation filling, sub base and mass concrete complete all as specified and directed. |
| 8 | M&L for Chequered cement concrete tiles (in any shade) 20cmx20cmx25mm/30cm x 30 x 25 mm thick, set, jointed and pointed with Mix of white or grey cement in equal propations with pigment in floors laid over and including 20 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 9 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 10 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 11 | M&L for vitrified heavy duty (dura stone) tiles 300x300x7 to 8 mm thick in floor, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match shade of tile over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 12 | M & L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 13 | Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete all as specified and directed. |
| 14 | M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and directed. |
| 15 | M&L 15mm thick rendering on other than fair faces of brick work or concrete surfaces with cement mortar 1:4 finished even and smooth (without using extra cement) complete all as specified and directed. |
| 16 | Excavating over areas, in Any type of soil n exc 1.5 m deep and getting out complete all as specified and Directed. |
| 17 | Removal of surplus soil to a distance n exc 50m and depositing where directed at a level n exc 1.5m above starting point all as specified and directed. |
| 18 | M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregates) as in drain benching etc. surface finished even and fair all as specified and directed. |
| 19 | M&L for PCC 1:2:4 type B-1(using 20mm graded stone aggregates) as in coping of drains including necessary formwork etc all as specified and directed. |
| 20 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc all as specified and directed. |
| 21 | M&L for MS TMT bar 10mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.90mm dia or securing with clips complete all as specified and directed. |
| 22 | M&L for pre-cast RCC slabs as in manhole covers in 1:2:4 type B1 using 20 mm graded stone aggreghate, set in cement mortar (1:4) incl use and waste of form work complete all as speciied and directed. |
| 23 | M & L for prepation newly plastered suraface and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm at all heights complete all as specfied and directed. Please Enable Macros to View BoQ information |
