Tender For Repair To External Periodical Services And Other Misc Services In Omq And Mess Area Under Ge (Af) Jamnagar No.2
Tender Value
20 Lakhs
Estimated cost
Bid Submission
11 Jul 2026
3 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jamnagar → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To External Periodical Services And Other Misc Services In Omq And Mess Area Under Ge (Af) Jamnagar No.2
BOQ
| Sl. No. | Item Description |
| 1 | M & L for preparation of old decorated surfaces of walls, plastered or unplastered and cornices, by brooming down, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of white wash on walls complete all as specified and directed. |
| 2 | M & L for preparation of old decorated surfaces of ceiling, plastered or unplastered and cornices, by brooming down, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of white wash on ceiling complete all as specified and directed. |
| 3 | M & L for preparation of old distempered/ decorated surfaces of ceilings incl brooming down, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of distemper oil emulsion complete all as specified and directed. |
| 4 | M & L for preparation of old distempered / decorated surfacesof walls incl brooming down, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying two coats of distemper oil emulsion complete all as specified and directed. |
| 5 | M&L for complete removal of existing treatment on old surfaces wall and application of 3 mm thick wall care putty complete all as specified and directed. |
| 6 | M&L preparation of existing treatment of old surface including brooming down, scrapping down smoke soot, mould, moss and efforescent salts and trading oil and grease spouts and cleaning with water on wall applying one coat of Acrylic emulsion (exterior weather coat) paint of any tint as approved complete all as specified and as directed. |
| 7 | M&L preparation of old decorated by brooming down scrapping down smoke soot,mould, moss and efforescent salts and trading oil and grease spouts and cleaning with water on wall applying two coats of Acrylic emulsion (exterior weather coat) paint of any tint as approved complete all as specified and directed. |
| 8 | M & L for preparation of old decorated by brooming down scrapping down smoke soot,mould, moss and efforescent salts and trading oil and grease spouts on wall and applying one coats of cement base paint ccomplete all as specified and directed. |
| 9 | M&L for preparation of old wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 10 | M&L for preparation of old painted of steel or iron surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 11 | M & L for preparation of old distempered/ decorated surfaces of walls incl brooming down, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of distemper oil emulsion complete all as specified and directed. |
| 12 | Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, including removal of debries to a distance exc 1.5 Km but n. exc 2 Km. complete all as specified and directed. |
| 13 | M&L for rendering 15mm thick in CM 1:6 on brick or stone walls to be finished even and smooth (without using extra lime or cement)including admixture of SBR (cost of SBR including) as per manufacture including fixing of scaffolding/padding if required upto 9mtr height complete all as specified and directed . |
| 14 | M & L for cement plaster 5 mm thick in CM 1:3 on concrete surface as on ceilling finished even and smooth with out using extra cement complete all as specified and directed. |
| 15 | M&L for applying two or more coat of 100 % premium acrylic emulsion paint having voc less than 50 gm/ltr and UV resistance as per IS 15489:2002, alkali & fungal resistance exterior paint of reqd sgade (company depot tinted ) with silicon additives @1.43 ltr /10m Sqm over and incl priming coat of exterior primer applied @0.90 ltr/10 Sqm over new surfaces complete all as specified and directed. Note:- contractor advised to execute the work up to ht of bldg G+2) |
| 16 | M & L for preparation of new surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 17 | S&F aluminium powder coated (minimum thickness of powder coating 50 micron) three track window ( two shutters glazed ) with frame, glazed with 4 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in Member for wire gauge Section shall be 18.00 x 25.00 x 1.35 (Section No 20791). position, concelled type lock for all two shutter, PVC roller etc all as specified below, including taking down old window complete all as specified and directed. (a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.35 mm ( Section No 20831) (b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.35 mm ( Section No 20832) (c) Top & side Members of shutter Section shall be be of size 18.00 x 40.00 x 1.35 (Section No 20738) (d) Shutter Interlock Section shall be be of size 18.00 x 40.00 x 1.35 (Section No 20737) (e) Bottom Members of shutter Section shall be be of size 18.00 x 40.00 x 1.35 (Section No 20736)Note:- Section No given above are of make Jidal, Contractor may use similar section of other make mention in Appx B |
| 18 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 19 | M & L Framed work such as grills, gratings, etc. with ends of bars houldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and welding of garage door ,repair to iron door and similar work con- forming to Fe.290. Gde-E-165 complete all as specified and directed. |
| 20 | M&L painting to new steel surface of any description over 10cm width or grith not otherwise described including preparation , priming with zinc chromate and two coats of synthetic enamel paint complete all as specified and directed. |
| 21 | Demolition of concrete surfaces in ground floor and paving n.exc. 15cm thickness (below or above ground level) and removing the same to a distance of 1.5 KM including loading and dumping/ levelling at the destination all as Specified. |
| 22 | M&L 100 mm thick PCC 1:2:4 type B2 (using 40 mm graded aggregate) in hard standing/path in aincluding spike rolling to surface and making impression of expanded metal whilst the concrete is green, complete all as specified and directed. |
| 23 | M&L for 75 mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in plinth protection, including finishing the surface even and fair complete all as specified and directed. |
| 24 | Taking down CPVC water tubing and connection 20 mm dia bore and removal from site. |
| 25 | Taking down CPVC water tubing and connection 25mm dia bore and removal from site. |
| 26 | Supply and fix 20 mm outer dia CPVC pipes SDR 11 & plain CPVC SER 11 fittings, fixed on wall concelled or exposed /ceiling or laying in floors complete all as specified and directed.Note:- Cutting chease wherever required will be measured & paid separately. |
| 27 | Supply and fix 25 mm outer dia CPVC pipes SDR 11 & plain CPVC SER 11 fittings, fixed on wall concelled or exposed /ceiling or laying in floors complete all as specified and directed.Note:- Cutting chease wherever required will be measured & paid separately. |
| 28 | M&L for cutting chases, of girth not exceeding 10 cm for concealed water tubing or concealed conduit wiring, etc. in stone / brick masonry wall built in cement mortar and making good, disturbed surface in Cement mortar 1:3 complete. |
| 29 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed. |
| 30 | S&F 4 mm thick glass sheet ordinary quality and glazing with oil putty/rubber beeding/ M seal etc n.exc 0.50 Sqm in each pane fixed to wooden/metalic frame complete all as specified and directed. |
| 31 | M&L for repairing of chajja / roof projection by taking down old plaster, damaged concrete surface, cutting of exposed reinforcement and making good with 1:4 including admixture of SBR (cost of SBR including) as per manufacture, and provide reinft cement concrete 1:2:4 type B1 as required, necessary scafolding, formwork etc up to 9 Meter heigh and applying 10 mm thick rendring in cement mortar 1:3, finishing the surface even & smooth without using extra cement complete all as specified and directed. NOTE: Reinft will be paid separately. |
| 32 | M&L MS steel TMT bars 10mm dia and over , cut to length ,bent to shape required including cranking bending spirally for hooping for column, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified and directed. |
| 33 | Dismantling water tanks of capacity exc 250 and n.exc 500 ltrs, complete all as specified and directed. |
| 34 | Dismantling water tanks of capacity exc 500 and n.exc 1000 ltrs, complete all as specified and directed. |
| 35 | Supply and fix in repair 500 litres capacity , rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 25 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed. |
| 36 | Supply and fix in repair 1000 litres capacity , rotational moulded, polythene water storage tank with cover (Cylindrical vertical with closed top),colour white , hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 25 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed. |
| 37 | Supply & fix in repair Nipple suitable for HDPE water tank (Minimum weight of 25mm- 65gms)inlet /outlet suitable for 25 mm bore pipe complete all as specified and directed. |
| 38 | S& F in repairs sintex cover for over head tank of any capacity including all fittings complete all as specified and directed. |
| 39 | S&F ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass ferrule and fixed 25mm dia complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender