Tender For Repair To Interlocking Tiles, Drains Temproary Sheds And Other Misc Works In Map And Billet Area At Af-I Under Ge (Af) Jamnagar No.2
Tender Value
20 Lakhs
Estimated cost
Bid Submission
11 Jul 2026
9 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jamnagar → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Interlocking Tiles, Drains Temproary Sheds And Other Misc Works In Map And Billet Area At Af-I Under Ge (Af) Jamnagar No.2
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick / stone masonry / block masonry work built in cement n.exc 50m, complete all as specified and directed. |
| 2 | Demolition concrete of any description and in any position complete all as specified and directed. |
| 3 | M&L for PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 4 | M & L for precast cement concrete (1:3:6) (using 20mm graded stone aggregate) solid building blocks exe 10 cm thick, in width (with plain or inter locking joints as directed) setting in CM 1:6 complete in wall or pillars complete all as specified and directed. |
| 5 | M&L for rendering 15 mm thick on brick / stone / PCC block masonry wall surface in cement mortar 1:4, finished even and smooth without using extra cement and using water proofing compound complete all as specified and directed. |
| 6 | M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred / stopped ends complete all as specified and directed. |
| 7 | M&L PCC (1:2:4) type B0 using 12.5 mm graded aggregate as in coping including necessary formwork complete all as specified and directed. |
| 8 | Material and labour for reinforcement cement concrete pipes, 450mm bore, class NP2, laid and jointed complete with collars complete all as specified and directed. |
| 9 | M&L for precast cement cocrete cover slabs (1:2:4) type B1 (using 20 mm graded stone aggregate) set in CM 1:4 for manholes complete all as specified and directed. |
| 10 | M & L for mild steel TMT bars of 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 11 | Dismantling posts or struts of (RCC, wooden or steel) any section, including taking out embedded portion in concrete or brick work of any position place including swan neck fencing post and making good to disturbed portion complete all as specified and directed. |
| 12 | Dismantling fencing wire mesh / chain link fencing, any type complete all as specified and directed. |
| 13 | Excavating in post holes (or similar holes) each n. exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n. exc 50 m and making good surface in soft / loose soil, complete all as specified and directed. |
| 14 | Supply & fix mild steel section for post and struts for fencing including cutting top to shape as directed drilling hole notching for wire etc. or flat iron fillet (for securing wire mesh etc) including all necessary drilling bolting, using steel section of grade E-165 (Fe-290), complete all as specified and directed. |
| 15 | S&F irons steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other to be fitted with washers and one hexagonal or square nuts, n. exc 5 cm long, diameter of neck 5 to 10 mm, complete all as specified and directed. |
| 16 | S&F chain link fencing 50mmx50mmx4mm thick mesh secured with MS flats, straining bolts including provision of binding wire complete all as specified and directed. (Note : Staining bolts, nuts and washers as supply only, flat iron and 10 mm dia round bars shall be, measured and paid separately) |
| 17 | M&L for cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) as in, foundation, filling, mass concreting etc complete all as specified and directed. |
| 18 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out soft / loose soil and take away from MOD land, complete all as specified and directed. |
| 19 | Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc.15 cm thick (75mm thick), watered and rammed to a true surface complete all as specified and directed. |
| 20 | M&L for 75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection etc, finishing surface even and smooth without using extra cement including making joints with bitumastic filling in proportion of bitumen and sand 1:3 by weight complete all as specified and directed. |
| 21 | M&L for sand filling (25mm thick sand screed bed) under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 22 | Material & Labour for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, without correction factor for chamfering, made in rubber moulds with 0.50 mm thick scratch proof lacquer coating on top surface, with grey cement and pigment complete all as specified and directed. |
| 23 | M&L for cement concrete type B-1,1:2:4 (using 12.5mm graded stone aggregate) 100 mm thick as in leveling course of flooring & roof complete all as specified and directed. |
| 24 | M&L for filleting in any position and to any shape and the section of fillet exc. 25 sq cm but N exc. 50 sq cm in cement mortar 1:4 including all mitres, stops, etc. complete all as specified and directed. |
| 25 | M&L providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including all nacessary excavation and earth work in any type of soil and making drainage opening wherever required complete all as specified and directed. |
| 26 | M & L for mild steel TMT bars 10 mm dia, cut to length, bent to shape required including bending, and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 27 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in Hard / Dense soil complete all as specified and directed. |
| 28 | Removing excavated soil exc 50M depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed. |
| 29 | Returning, filling in, including spreading, levelling, watering and well ramming in layers (Hard / Dense soil ) not exc 25 cm complete all as specified and directed. |
| 30 | M&L PCC 1:4:8 type D2 using 40 mm graded stone as in foundation filling and mass concrete as directed and including necessary use and wase of formwork complete all as specified and directed. |
| 31 | M&L for repairing of chajja / roof projection by taking down old plaster, damaged concrete surface, cutting of exposed reinforcement and making good with 1:4 including admixture of SBR (cost of SBR including) as per manufacture, and provide reinft cement concrete 1:2:4 type B1 as required, necessary scafolding, formwork etc up to 9 Mtr heigh and applying 10 mm thick rendring in cement mortar 1:3, finishing the surface even & smooth with out using extra cement complete all as specified and directed.NOTE: Reinft will be paid separately. |
| 32 | M&L for preparation of new plastered surfaces of wall & applying two coat of white wash on wall surfaces complete all as specified and directed. |
| 33 | Removing building materials (Cement concrete any description, bricks, stone slab and tiles, bricks dust or mud etc) to a distance of 30 KM beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations complete all as specified and directed. |
| 34 | Dismantling of plain or corrugated asbestos cement / translucent (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 35 | S&F pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 36 | S&F pre-painted galvatume aluminum zinc coating GI based Plain sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in ridges, hips, valley gutters, drip fixed with self tapping screws complete all as specified and directed. |
| 37 | S&F fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc. complete all as specified and directed. |
| 38 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 39 | M&L painting to new steel surface of any description over 10cm width or grith not otherwise described including preparation , priming with zinc chromate and two coats of synthetic enamel paint complete all as specified and directed. |
| 40 | Dismantling structural steel work any type and any discription etc. complete all as specified and directed. |
| 41 | S&F steel work in tubular trusses including special shaped washer etc using ERW or including butt welded tubes conforming to IS 1161-1979 grade St-240, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysJul 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 days