|
| 1 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and getting out in soft/loose soil complete all as specified and directed. |
| 2 | Returning, filling incl spreading, levelling watreing and well ramming in layers n'exc 25cm in soft/loose soil for sewage pipe line manholes sides and cleaning the site all as specified and directed. |
| 3 | Removing excavated material to a distance not exceeding 50m and depositing where directed at a level not exc 1.50m from the starting point complete all as specified and directed. |
| 4 | M&L for cement concrete 1:4:8 type D2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete . |
| 5 | M&L for Pre-cast cement concrete 1:3:6, type B-1 using 20mm crushed stone aggregate as in block masonry with solid blocks, exc. 10cm in width and setting in mortar built in cement mortar 1:4. complete all as specified and directed. |
| 6 | M&L RCC type B1 1:2:4, 20 mm graded stone aggregate (nominal mix)as in plinth beam/band etc mixed with using integral water proofing compound.(WPC shall be measured separately) complete all as specified and as directed. |
| 7 | Providing, cement concrete 1:2:4 type B1 as in surface channel and drains, benching of manholes in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed. |
| 8 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. |
| 9 | TMT bars 8 to 10 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 10 | Formwork to sides of concrete foundation,footing,based of columns,raft and raft beam,sides and soffits (if any) of foundation and plinth beams, self and similar works,vertical or to batter rough finished flate surface of concrete complete all as specified and as directed. |
| 11 | Taking down shutters not exc 2 sqm each complete all as specified and as directed. |
| 12 | S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including one face is covered with decorative face veneer with lipping/frame to match all as specified and as directed. |
| 13 | S&F of Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing all as per drawing complete all as specified and as directed. |
| 14 | S&F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing directed. |
| 15 | Supply & Fixing 150 mm Aluminium handles, cast type, anodised complete all as specified and as directed. |
| 16 | S&F Butt hinges, medium weight coldrolled mild steel and fixed 75mm sizecomplete all as specified and as directed. |
| 17 | S&F 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 18 | S&F butt hinges 100 mm long medium weight, cold rolled mild steel all as specified and directed |
| 19 | S&F etxtruted aluminium alloy handles,fabricated type anodised 150mm long. |
| 20 | S&F aluminium anodised, barrel tower bolts of extruded section 150 mm long |
| 21 | Preparation of new wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink wood primer complete all asspecified and directed. |
| 22 | M&L 9 mm thick Prelaminated particle board, exterior grade, prelaminated bothside with decorative choice lamination, fixed with screws to aluminium frame work as in cup board shutters, shelves and as in partition all as specified and as directed |
| 23 | Provn of cupboard self using 16-18mm plywood with factory pressed laminate (1mm colour laminate external and fabric textured 0.5mm internal) and 1mm PVc edge binding on every edge of the frame complete all as specified and directed. |
| 24 | S&F Ball bearing runners 500mm Telescopic channel full load extension load capacity of 50 kgs fixed drawer and all as specified and directed. |
| 25 | S&F Stainless steel handles 100mm size for drawer/ shutters and all as specified and directed. |
| 26 | S&F 35mm SS autoclosing hinge fixing all as specified and directed. |
| 27 | Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters(Without taking off shutters from the frames) complete all as specified and as directed. |
| 28 | Providing and fixing factory made uPVC 3 track white colour fixed window made of extruded profiles with wall thickness of 2.3mm(+-0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm). T profile (Onevertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket. 1.2 +–0.2mm thick, galvanized steel Frame (28mm x21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners- including 4 mm thick glazing with selected quality glass Area exceeding 1.00 Sqm but not exc2.00 sqm each. Make : Astrapia or equivelent. Note: The unit rate quoted by contractor inclusive of cost of glass and all other connected accessories .Net opening will be measured for payment purpose. |
| 29 | Supply and fixing Framed work such as Gate, grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 30 | Supply and fixing powder coated aluminium frame work for door frame/ partition with one or more rebates including joining cleats, hooks, hangers, beadings, tower bolts, hinges, rubber gaskets etc, minimum thickness of powder coating 50 micron complete all as specified and as directed. |
| 31 | Supply and fixing powder coated aluminium (Powder coating not less than 50 micron) side hung door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed. |
| 32 | Supply and fixing powder coated aluminium (Powder coating not less than 50 micron) side hung window and ventilator shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed. |
| 33 | S&F 4.5mm thick powder coated aluminium grill with 50mm opening (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge |
| 34 | Haking out of any size, shape and thickness of glass from the vindow or ventilator or doors etc and complete removal from the site carefully all as specified and as directed. |
| 35 | Supply and fixing 5mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 36 | Supply and fixing mild steel powder coated pelmet rods 25mm outer dia including 2 Nos of brackets 2 Nos of pintals or side brackets as per site requirement complete all as specified and directed. |
| 37 | Supply and fixing 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed. |
| 38 | Supply and fixing Door closer, aluminium die cast body, hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed. |
| 39 | Supply and fixing brass mortice lock (4 levers), vertical type, size 100mm long complete all as specified and directed . |
| 40 | M&L for annodised aluminium snap grid frame work for false ceiling incl hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 3 mm dia 40mm long and 6.5 mm thick Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mmx600mm grid(frame work for ceiling shall be measured and paid seperately) complete all as specified and as directed. |
| 41 | Supply and fix looking mirror of size outer dia including bracket 500 mm swivel mirror all as specified and as directed. |
| 42 | Taking down cement plaster on walls any description incl raking out joints, hacking for key and scrubbing down with water etc complete all as specified and as directed. |
| 43 | M&L for rendering 15 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces of wall finished even and smooth without using extra cement complete all as specified and as directed. |
| 44 | M&L Two coats of acrylic distemper over a coat of primer on walls over 2 mm putty, pillasters, cornices, etc., on newly plaster surface and necessary preparation of surfaces all as specified and as directed. |
| 45 | Material and labour for external wall rendering 20 mm (average) thick(in two layed 15 & 5 mm thock plaster) in cement mortar (1:6) on brick/stone surface finished even and smooth without using extra cement complete all as specified and as directed. |
| 46 | M&L applying two coat of cement based paint over a coat of primer, including preparation of newly plastered wall surfaces of any description, complete all as specified and as directed. |
| 47 | M&L Two coats of acrylic distemper over a coat of primer on walls over 1 mm putty, pillasters, cornices, etc., including complete removal of existing treatment and necessary preparation of surfaces all as specified and as directed. |
| 48 | M&L One coat of cement based paint on old cement painted walls, pillasters, cornices, etc., including necessary preparation of surfaces all as specified and as directed. |
| 49 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. |
| 50 | M&L One coat of synthetic enamel paint on old painted wooden surfaces of any description over 10cm width or girth including necessary preparation of surfaces all as specified and as directed. |
| 51 | M&L One coat of synthetic enamel paint on old painted steel surfaces of any description over 10cm width or girth including necessary preparation of surfaces all as specified and as directed. |
| 52 | Dismantling any floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and as directed. |
| 53 | M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm screed bed 1:6 all as specified and as directed. |
| 54 | M&L coloured Glazed ceramic tiles in vertical surface 600X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm back coat of CM 1:4 complete all as specified and as directed. |
| 55 | M&L Vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished light shade, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete including 15mm thick screed bed 1:6 set complete all as specidied and as directed. |
| 56 | M&L Vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished light shade, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete including 10mm thick back coat 1:4 set complete all as specidied and as directed. |
| 57 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 58 | Removing building materials etc. to a distance of 500m or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed. |
| 59 | Material and labour for Sadarahalli Stone (of any type) tiles 18 to 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over & including 20mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 60 | S&F Pre painted galvalume aluminum zink coating GI based corrugated steel sheet 0.50 mm thick of any colour and any shape having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed. |
| 61 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed. |
| 62 | S&F for steel work in tubular trussess including special shaped washer etc complete using ERW or induction but welded tubes confirming to IS 1161-1979 grade St-240 and necessary ancoring with boalt system to wall / floor where ever necessaty all as specified and as directed by Eng-in-Charge. |
| 63 | M&L Two coats of synthetic enamel paint over a coat of red oxide primer including necessary preparation of new steel surfaces of any description exceeding 10cm width or girth all as specified and as directed. |
| 64 | M&L for cement concrete 1:3:6 type C-2, 75 mm thick using 40mm graded stone aggregates as in plinth protection finished fair and even complete all as specified and as directed. |
| 65 | Taking up or down steel water tubing and connections 15 mm dia complete all as specified and as directed |
| 66 | Taking up or down steel water tubing and connections 20mm dia complete all as specified and as directed |
| 67 | S&F steel tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor bore of pipe 15mmdia. including making hole in RCC slabs for vertical pipes & making good the same with Cement Concrete I:2:4 complete all as specified and as directed. |
| 68 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth brick / stone walls complete all as specified and as directed. |
| 69 | S&F steel tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor bore of pipe 20mmdia. including making hole in RCC slabs for vertical pipes & making good the same with Cement Concrete 1:2:4. |
| 70 | Dismantling water tanks of capacity exc 500 Ltr and not exc 1000 ltr complete all as specified and as directed |
| 71 | M&L for Rotational moulded polyethylene water storage tanks 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed |
| 72 | S&F in repair vitreous china urinal bowl type of flat back, size of 465x355x265mm, white with greating & unions for discharge pipe complete including provide and fixing plugs, bedding urinal against wall in CM 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in fixing automatic flushing cistern with brackets, flush pipe, greating and unions for discharge pipe and complete all as specified and as directed. |
| 73 | S&F in repairs china wash down water closet (pedestal pattern) EWC white incl plastic water closet seat cover and mild steel chromium plated on aluminium hinging device and connecting to 'P' or 'S' incl connecting flush pipe with flushing rim complete all as specified and as directed. |
| 74 | S&F in repair of CP 1.5m pipe health faucet all as specified and as directed. |
| 75 | S&F Brass chromium plated 2-in-1 tap 15mm bore for fixing of health faucet and all as specified and directed. |
| 76 | S & F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed by Engr-in-Charge. |
| 77 | S&F PVC High or low level flushing cistern 10 liters capacity (exclusive of brackets), and connections to pipes and fixing of chain and pull, or lever,Joint between flushing pipe and socket of W.C. pan pre-made, if any complete all as specified and as directed. |
| 78 | S&F stop/angle valves cast copper screwed down high pressure fancy type screwed both ends for pipe or union fixed for 15mm bore complete all as specified and as directed. |
| 79 | S&F in repair tubular towel rail alumunium anodised 20mm dia 'D' type 60cm long between flanges and all as specified and directed. |
| 80 | Supply and fix wash basins vitreous China thin rim table top basin including cutting for and pinning in ends of brackets or erecting stand incl supply and fixing of waste couplings, waste pipe all as specified and as directed. |
| 81 | Supply and fix 15 mm bore fancy type single lever Basin mixer chromium plated cast copper alloy with capstan head, long screwed shanks all as specified and as directed. |
| 82 | S&F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 83 | S&F 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 84 | S&F in repairs 125/ 110 mm bore PVC (SWR) floor trap plain with grating incl jointing with solvent cement complete all as specified and as directed. |
| 85 | Supply and fix 110mm dia PVC bend any radius complete all as specified and as directed. |
| 86 | Supply and fix 75mm dia PVC bend any radius complete all as specified and as directed. |
| 87 | S&F PVC (SWR) bends of any radius with access door bore of pipe 110 mm complete all as specified and as directed. |
| 88 | S & F PVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 110 mm complete all as specified and as directed. |
| 89 | S & F PVC (SWR) reducers 110 mm complete all as specified and as directed. |
| 90 | S&F PVC (SWR) vent cowl bore of 110 mm bore complete all as specified and directed by Engr-in-Charge. |
| 91 | S&F 1mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 including welded or soldered joints are provided complete all as specified and as directed. |
| 92 | Surface excavation n.exc 30cm deep and averaging 24 cm deep and getting out in soft/ loose soil complete all as specified and directed. |
| 93 | M&L for broken stone boulders hard core of guage n.exc 63mm deposited spread and level laid in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 94 | M&L for cement concrete 1:4:8 type D-2, using 40mm graded stone aggregates as in mass concrete, sub base complete all as specified and directed. |
| 95 | M&L for Sand filling under floors or in foundations including watering and consolidation and all as specified and directed. |
| 96 | M&L for machine pressed pre polished precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade over sand cushion with grey cement and no pigment all as specified and directed. |
| 97 | M&L Granite (of any type) tiles 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed. |
| 98 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out in hard/dense soil, returning, filling in and ramming earth or broken rubble mixed with erth ground, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50m and making good surface and all as specified and directed. |
| 99 | M&L for Cement concrete 1:3:6 type C2 (using 40 mm graded stone agg) as in foundation filling and for mass concrete and all as specified and directed. |
| 100 | S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. including necessary cutting, drilling, welding etc and drilling holes notching for wires etc conforming to Fe-410- W(Gde- E-250) quality- B |
| 101 | Supply only of chain link fencing MS galvanised sqaure wire mesh of size 50mm X 50mm, dia of wire 4mm including line wires, to any type of standard rails, straining bolts, etc all as specified and directed. |
| 102 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc inlcuding provision of binding wire etc all as specified and directed. |
| 103 | S&F Flat iron welded or jointed in connection with framed work including securing bolts and all necessary drilling, bolting or reverting and similar work conforming to Fe-410-0 complete all as specified. |
| 104 | S&F MS round bars 10 mm dia and over Fe 290 (Gde - E-165)cut to length bent to shape required including cranking, bending spirally, hooping for columns, hooking ends and all as specified and directed by EIC. |
| 105 | S&F Mild steel screw bolts (machine made) dia of neck 16 to 20mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long Please Enable Macros to View BoQ information |
| 106 | S&F Mild steel screw bolts (machine made) dia of neck 16 to 20mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long Please Enable Macros to View BoQ information |
