|
| 1 | S&F hollow PVC wall paneling, super strong quality single side prelaminated with flat or fancy patterned on laminated side, incl PVC 'L' and 'U' sections for finishing of corners and ends etc inclusive of fixing with screw or with solvent cement required at site on walls including taking down old existing wall panelling complete as specified and directed. |
| 2 | S&F Anodised aluminium snap grid of size 605mm x 605mm frame work for false ceiling all as specified including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including dismanteling of old aluminium frame complete all as specified and directed. |
| 3 | Exposed metal frame ceiling with calcium silicate board 6mm thick of siliceous and calcareous material reinforced with cellulose fibre or E-ceiling or similar material Board for fixing in 600mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) including dismantling old AC/CGI/PVC/wooden or any pattern old sheet and removing from site complete all as specified and directed. |
| 4 | S & F of 18 mm thick HDHMR base material for cabinet finishes including all necessary fittings, approved including dismantling old unserviceable Cupboard shutter with frame complete all as specified and directed.Note:Laminate to be provided over cupboard base material. |
| 5 | S & F of 30mm width of flaps, Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed. |
| 6 | S&F of Hettich/Godrej Interio/Wurfel Kuche or equivalent self clossing hinges hinges 75 mm long complete all as specified and directed. |
| 7 | S& F of Hettich/Godrej Interio/Wurfel Kuche or equivalent Magnet lock 30 mmm long complete all as specified and directed. |
| 8 | S& F of Hettich/Godrej Interio/Wurfel Kuche or equivalent 150mm long SS fancy pull type handle oval D with screws complete all as specified and directed |
| 9 | Rendering 10mm thick Cement plaster 1:6 on fair faces of brick work or concrete surfaces, trowelled to even and smooth finish w/o using extra cement including taking down old cement plaster complete all as specified and directed. |
| 10 | M&L for Preparation of New plastered surface of wall and Priming plastered and other surfaces with alkali resistant priming paint, Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth, applying two coats of Oil bound emulsion distemper complete all as specified and directed. |
| 11 | Rendering 15mm thick Cement plaster 1:4 on fair faces of brick work or concrete surfaces, trowelled to even and smooth finish without using extra cement including taking down old cement plaster complete all as specified and directed. |
| 12 | M&L for 15mm thick Rough cast Cement plaster 1:4 on fair faces of brick work or concrete surfaces including taking down old cement plaster as specified and directed. |
| 13 | M&L for Preparation of New plastered surface of wall and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed. |
| 14 | M&L for Complete removal of existing treatment on walls and applying one coat of alkali resistant primer and two coat of Oil bound distemper complete all as specified and directed. |
| 15 | M&L for Complete removal of existing treatment on walls and applying one coat of alkali resistant primer and two coat of weather proof Exterior paint complete all as specified and directed. |
| 16 | M&L non skid coloured designer ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed with Epoxy to match with and including 15mm thick screed bed in CM (1:6) including dismantling of old existing tiles complete all as specified and directed. |
| 17 | S&F of light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15 mm thick CM 1:6 for laying floor finishes including dismantling of old existing tiles complete all as specified and directed. |
| 18 | S&F of Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, but on skirting over with and including 10mm thick backing coat in CM 1:4 including dismantling of old existing tiles complete all as specified and directed. |
| 19 | S&F of coloured Glazed ceramic tiles in vertical surface 350 x 250 x 7 mm/ 450 x 350 x 7mm/300x450x7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick backing coat of CM 1:4 including dismantling of old existing tiles complete all as specified and directed. Please Enable Macros to View BoQ information |
