Tender For Provn Of Shed For Charging Stn For Electrical Vehicle At Afmc Pune Under Ge (Central) Pune
Tender Value
9.98 Lakhs
Estimated cost
Bid Submission
10 Jul 2026
1 days left
EMD
19960
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Shed For Charging Stn For Electrical Vehicle At Afmc Pune Under Ge (Central) Pune
BOQ
| Sl. No. | Item Description |
| 1 | Surface Excavation n exc 30cm deep ad averaging 15cm deep and getting out any type of soil complete all as specified and directed. |
| 2 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out Hard/Dense Soil complete all as specified and directed. |
| 3 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out Soft disintegrated rock complete all as specified and directed. |
| 4 | M&L for cement concrete type D2 1:4:8 (using 40mm graded stone aggregates) as in foundations, filling and mass-concrete complete all as specified and directed. |
| 5 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for fair finished surfaces complete all as specified and directed. |
| 6 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surfaces complete all as specified and directed. |
| 7 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup-ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed. |
| 8 | M&L for Reinforced cement concrete design mix M-25 grade as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 9 | M&L for Reinforced cement concrete design mix M-25 grade as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 10 | M&L for Reinforced cement concrete design mix M-25 grade as in Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 11 | M&L for TMT bar 10mm dia and over cut to length bent to shape reqd incl cranking bending etc complete all as specified and directed. & binding with MS wire (annealed) not less than 0.9mm dia in reinforcement complete all as specified and directed. |
| 12 | All as per srl item no 11 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed. |
| 13 | M&L for Pre-cast cement concrete block masonry with solid blocks, Type D-5, 1:5:8, exc. 10 cm in width and setting in mortar, complete all as specified and directed., built in cement mortar (1:6) complete all as specified and directed. |
| 14 | S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410-W (Gde-E-250) quality-A complete all as specified and directed. |
| 15 | M&L for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410W (Gde-E-250) quality B complete all as specified and directed. |
| 16 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping complete all as specified and directed. |
| 17 | S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping complete all as specified and directed. |
| 18 | M&L for 75mm thick Cement concrete type D2 1:4:8 (using 40mm graded stone aggregates) as in sub base course complete all as specified and directed. |
| 19 | M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 20 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cmthick, spread, levelled and rammed including watering & Ramming complete all as specified and directed. |
| 21 | M&L for cement concrete type D2, 1:4:8 with using 40mm graded aggregate in sub base of 75 mm thick complete all as specified and directed. |
| 22 | M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4), the surface even and Smooth without extra cement complete all as specified and directed. |
| 23 | M&L for rendering 15mm thick plaster on fair faces of brick work or concrete surfaces of walls (1:6) finished the surface even and Smooth without extra cement complete all as specified and directed. |
| 24 | M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bond distemper over one or two coats of putty including one coat of primer complete all as specified and directed. |
| 25 | M&L for Finishing walls with Acrylic Smooth exterior paint of required hade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed. |
| 26 | M&L for Machine pressed coloured Glossy finish precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade including 30 mm thick grit/stone dust cushioning complete all as specified and directed. |
| 27 | M&L for plain cement concrete 1:3:6 Type C1 using 20mm graded aggregate as in coping including form work etc complete all as specified and directed. |
| 28 | M&L for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide or zink chrome primer on new steel surfaces complete all as specified and directed. |
| 29 | Returning filling in soil including spreading, levelling and well ramming in layers n.exc 25cm thick in layer etc all complete all as specified and directed. |
| 30 | Returning filling in soft disintegrated including spreading, levelling and well ramming in layers n.exc 25cm thick in layer etc all complete all as specified and directed. |
| 31 | Removing excavated soil n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 32 | Removing excavated soft disintegrated n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender