|
| 1 | Taking up or down Steel Water Tubing including Connections and Fittings, Segregating Serviceable Pipes & Fittings, Stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and directed for the following size of pipes :-(Note: Earthwork shall be measured and paid seperately) |
| 2 | 100mm bore |
| 3 | 80mm bore |
| 4 | 50mm bore |
| 5 | 40mm bore |
| 6 | 25mm bore |
| 7 | 20mm bore |
| 8 | 15mm bore |
| 9 | Supply, Laying and testing Steel Water Tubing, Galvanised, ‘Medium Grade’ with all Fittings, laid in trenches or any other Situation, complete as all specified and directed for the foll0wing size of pipes :-(Note: Earthwork shall be measured and paid seperately) |
| 10 | 100mm bore |
| 11 | 80mm bore |
| 12 | 50mm bore |
| 13 | 40mm bore |
| 14 | 25mm bore |
| 15 | 20mm bore |
| 16 | 15mm bore |
| 17 | Relaying/Re-fixing Galvanised Steel Tubing and Connections in New or Old Position (Serviceable Pipes and Fittings obtained from taking down item) after Cleaning both Inner and Outer Surfaces of Pipes by using of Wire Brush complete all as specified and as directed for the follwing size of pipes :-(Note: Earthwork shall be measured and paid seperately) |
| 18 | 80mm bore |
| 19 | 50mm bore |
| 20 | 40mm bore |
| 21 | 25mm bore |
| 22 | 20mm bore |
| 23 | Supply, laying and testing UPVC pipe, SDR-11 class, complete with all fittings such as sockets, elbows, tees, reducers, unions, nipples and other accessories as required, laid in trenches, chases, walls or any other position, complete all as specified and directed for the following sizes of pipes:-NOTE: Earthwork for excavation, backfilling and disposal of surplus soil shall be measured and paid separately. |
| 24 | 50mm outer dia |
| 25 | 40mm outer dia |
| 26 | 25mm outer dia |
| 27 | 20mm outer dia |
| 28 | 16mm outer dia |
| 29 | S&F UPVC Ball Valve, suitable for UPVC SDR-11 pipe lines, with suitable end connections (screwed/socket/flanged type as applicable to pipe size), complete with all necessary fittings and accessories, complete all as specified and directed, for the following sizes of pipes:- |
| 30 | 50mm outer dia |
| 31 | 40mm outer dia |
| 32 | 25mm outer dia |
| 33 | 20mm outer dia |
| 34 | 16mm outer dia |
| 35 | Excavation in trenches not exc 1.5 metre width and not exceeding 1.5 metre in depth in soft/loose soil and getting complete all as specified and as directed.NOTE: Width of excavation should not be more than that specififed under Para 3.2.3 of SSR part-II (Rates). |
| 36 | Excavation of trench in for portions of road / path / hardstanding etc, not exc 1.50 m wide and not exc 1.50 m deep and getting out complete all as specified and directed. |
| 37 | Returning, Filling in including Spreading, Levelling, Watering, Well Ramming in Layers not exc. 25 Cm, Surplus Soil providing Heaps along the Route of the Pipe Line in Soft/Loose Soil, complete all as specified and as directed. |
| 38 | M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate as mass concrete for filling of road cutting, hardstanding, path etc complete all as specified and directed by Engr-in-Charge. |
| 39 | S&F in repairs Gun Metal Gate Valve, screwed at both ends, with iron wheel head, conforming to IS 778, Class-I, suitable for connection to GI/MS pipe lines by means of screwed joints/unions, complete all as specified and directed, for the following sizes of pipes:-- |
| 40 | 50 mm bore |
| 41 | 40 mm bore |
| 42 | 25 mm bore |
| 43 | 20 mm bore |
| 44 | 15 mm bore |
| 45 | S&F in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20 mm bore (Minimum weight 210 gms) complete all as specified and directed. |
| 46 | All as per item No. 11 above but for 25mm bore pipe Please Enable Macros to View BoQ information |
| 47 | All as per item No. 11 above but for 25mm bore pipe Please Enable Macros to View BoQ information |
