|
| 1 | M&L Brick Work in repairs with Sub-Class 'B' Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, and including demolition of brick work or stone masonry built in cement mortar incl all quoins arches pillars etc. complete all as specified and as directed. |
| 2 | M & L for PCC 1:2:4 type B-1 using 20mm graded aggregate as in coping bed block,surface channels, benching in sewers, drains etc, complete all as specified and directed |
| 3 | M&L Pre-cast Reinforced Cement Concrete 1:2:4 (20mm graded aggregate) in Cover Slab of Manholes, Septic Tanks, etc., set in Cement Mortar 1:4 including demolition of existing RCC slabs, complete all as specified and as directed.NOTE: Reinforcement will be Measured and Paid separately under appropriate Items. |
| 4 | M&L TMT Bars 10mm dia and overcut to length, bent to shape required including cranking, bending spirally for Columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and as directed. |
| 5 | M&L two coats of cement base paint over a coat of primer on new wall surface including preparation of surface, complete all as specified and directed |
| 6 | M&L preparation of old surface of wall and applying one coat of cement base paint, complete all as specified and directed |
| 7 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion & making good disturbed ground embedded in Concrete, brick work, masonry, etc, complete all as specified and directed |
| 8 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in & raming earth/ broken rubble mixed with earth around, in layers n. exc. 25cm, watering, & removing surplus soil to a distance n exc 50m & making good surface in soft/loose soil, complete all as specified and directed |
| 9 | M&L PCC in foundations, filling and mass-concrete type B2 (1:2:4) using 40 mm graded stone aggregate, complete all as specified and directed |
| 10 | S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 including necessary prepration of surface and applying a coat of red oxide zinc chrome primercomplete all as specified and directed. |
| 11 | Material and Labour for mild steel round bars 6mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping columns, hooking ends and binding with welding for securing chain link fencing etc conforming to Fe-290,Gde-E-165, complete all as specified and directed. |
| 12 | M&L applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome |
| 13 | M&L preparation new iron and steel surfaces of any description, not exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chromr primer complete all as specified and directed. |
| 14 | M&L Preparing surface of ends of post, steel & iron work, new or old & treated with tar or coal tar black paint, area tarred exc 0.1 sq. m. but n exc 0.5 sq. m each, treating ends of posts, backs of chowkats, etc. |
| 15 | All as per item No.15 above herein before but not exceeding 10cm wide or girth. |
| 16 | M&L for mild steel work for securing of chain link fencing and similar small articles etc confirming to IS:15911 all as specified and directed. |
| 17 | S&F in repairs for galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at cross with and provision of galvanised mild steel wire, staples or steel pins etc all as specified and directed. |
| 18 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire, complete all as specified and directed |
| 19 | Supply only PVC Coated Chain link MS galvanised fencing, any size or type, complete all as specified and directed |
| 20 | Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing confirming to FE 410, E-250 Quality A including dismantling wrought or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 21 | Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness. (Below or above ground level), complete all as specified and directed |
| 22 | M&L for PCC 1:3:6 type C2 using 40MM graded aggregate as in Foundations, Filling, sub base and Mass Concrete including use and waste Formwork as ordered/required at Site, complete all as specified and directed |
| 23 | S&F 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand including dismantling existing unserviceable paver block complete all as specified and directed. |
| 24 | S&F in repair 450mm bore Reinforced concrete pipes, class NP2, laid and jointed complete with collars including Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required, complete all as specified and directed |
| 25 | M&L for cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) Concrete bed to drain pipes 450mm bore including packing under and completely surrounding pipes with concrete after they are laid and tested in complete all as specified and directed. |
| 26 | M&L for providing precast cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate set in cement mortar 1:4 in kerb stone with plain fair faces complete all specified and directed |
| 27 | Taking down cement plaster on wall & ceiling of any description including racking out joints, hacking for key and scrubbing down with water etc complete including removing debries of the site complete all as specified and as directed. |
| 28 | M&L 15mm thick plaster of cement mortar (1:4) rendering on fair faces of brick work mixed with and including water proofing compound as per manufacturer's instructions, finishing the surface even and smooth without using extra cement complete all as specified and as directed.(Note:- WPC shall be measured and paid separately). |
| 29 | Supply only integral water proofing compound complete all as specified and directed. |
| 30 | M&L Preparation new plastered surfaces of wall and applying two coat of cement base paint using roller paint brush etc. complete all as specified and as directed. Please Enable Macros to View BoQ information |
