|
| 1 | Table office clerk steel (FD-84/1003,1004 ) |
| 2 | S & F following components of Table office cleark steel including dismantling unservicable one all as specified and as directed.Drawer made of 1mm CRCA sheet including painting with synthetic enamel paint of approved shade & quality over a coat of primer both inside and outside including preparation of surfaces and repairing inter locking system and providing new lock 6 lever to top drawer. |
| 3 | Leg/stiffener 25 x 25 x 1.6mm thick MS squire pipe duly welded to the frame and painted with one coat of synthetic enamel paint over a coat of primer |
| 4 | Lock of 4 levers with duplicate keys (Make- Link,Lico,Harrison,Godrej) |
| 5 | S&F new top of 18/19mm prelaminated MDF board of exterior grade with 4mm thick half round beading all round of table office clk steel top as per drg & directed. |
| 6 | PVC shoe |
| 7 | Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of synthetic enamel paint of approved shade & quality both inside and outside complete all as specified and as directed (Make-Asian,Berger,Shalimar,MRF) |
| 8 | Table office officer Steel (FD-84/1003,1004 ) |
| 9 | S & F following components of Table office officer steel including dismantling unservicable one all as specified and as directed.Drawer made of 1mm CRCA sheet including painting with synthetic enamel paint of approved shade & quality over a coat of primer both inside and outside including preparation of surfaces and repairing inter locking system and providing new lock 6 lever to top drawer. |
| 10 | Leg/stiffener 25 x 25 x 1.6mm thick MS squire pipe duly welded to the frame and painted with one coat of synthetic enamel paint over a coat of primer |
| 11 | Lock of 4 levers with duplicate keys (Make- Link,Lico,Harrison,Godrej) |
| 12 | Side panel made of 1mm CRCA sheet including painting with synthetic enamel paint of approved shade of approved quality over a coat of primer both inside and outside including preparation of surfaces. |
| 13 | S&F new top of 18/19mm prelaminated MDF board of exterior grade with 4mm thick half round beading all round of table office clk steel top as per drg & directed. |
| 14 | PVC shoe |
| 15 | Preparation of old painted steel surfaces by scraping with emary paper, cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of synthetic enamel paint of approved shade & quality both inside and outside complete all as specified and as directed(Make-Asian,Berger,Shalimar,MRF) |
| 16 | Charpoy GI pipe ( Drg No FD-220) |
| 17 | S & F in repairs long rail made of 32 mm dia GI tubing medium grade ISI marked 1.88 metre long, threaded at both ends and fixing to 3 way 32 mm dia GI elbow of charpoy.Make : Jindal/Ravindra/Tata |
| 18 | Conversion of 32 mm dia long rail obtained from item No 3.01 above two short rail after cutting and one short rail threading both ends and fixing to 3 way 32 mm dia existing elbow. Note : Count one short rail each for this item |
| 19 | Conversion of 32 mm dia short rail obtained from item No 3.02 above two leg after cutting and one leg threading one ends fixing to 3 way 32 mm dia existing elbow at one end threaded and cover the other end with hard rubber/PVC shoe.Note : Count one leg each for this item |
| 20 | S & F in repairs 3 way 32 mm dia GI elbow ISI marked complete as per specified. |
| 21 | S & F in repairs check nuts of 32 mm dia ISI marked complete as per specified. |
| 22 | S & F in repairs 12 mm BWR phenol bonded commercial plywood of existing size including providing 50mm wide strip made out of 6mm thick plywood for filling gap between plywood sheet and short rails including replacement of bolts and nuts for fixing of plywood. Make - Archid Ply/Green Ply/CenturyPly |
| 23 | S & F in repairs MS flat of size 40x4mm with two Nos nut & bolts as stiffner shall be fitted for support of plywood. |
| 24 | S&F FMN Holder duley welded and dismenteling the unsv one |
| 25 | Almirah steel large (FD-67/1031) |
| 26 | S & F Lock 7 lever with duplicate keys components of Almirah steel med including dismantling unservicable one all as specified and as directed(Make of Lock- Harrison,Link,Lico,Godrej) |
| 27 | S & F Handle 100 mm size chromium plated Heavy components of Almirah steel med including dismantling unservicable one all as specified and as directed |
| 28 | S & F 3 way locking device with necessary fittings and painted with one coat of synthetic enamel paint of approved shade & quality over a coat of primer. |
| 29 | S & F leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of approved shade & quality over a coat of primer. |
| 30 | S & F door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with 7 lever lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of directed shade by Engr-in-Charge over a coat of primer inside and outside Two coat of spray painting of Hammertone paint (pattern of hammer tone shall be 0.06 gram silicon/kg) shall apply after preparation of surface all as specified and shown on drawing.Note for steel painting;- All steel surface shall be done with spray painting)(Make of Lock- Harrison,Link,Lico,Godrej) |
| 31 | S & F shelves made of 1mm thick CRCA sheet welded/riveted and painted with one coat of synthetic emamel paint of directed shade by Engr-in-Charge over a coat of primer. |
| 32 | Preparation of old painted inner steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed.Note: Paint shall be make of Asian/Berger/Shalimar/MRF and shade of colour as per direction of Engr-in-Charge. |
| 33 | Preparation of old painted outer steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) of approved quality including dents/bends all as specified and as directed.(Make- Asian/Berger/Shalimar/MRF)Note Paint shall be make of Asian/Berger/Shalimar/MRF Vapcoure and shade of colour as per direction of Engr-in-Charge. |
| 34 | Repair/Replacement of following u/s parts of \\"Table tublar/Allwyn steel\\" with suitable new parts of existing shape & size complete to match the original and directed by Engr-In-Charge.FD-119 |
| 35 | S&F new top of 18/19mm prelaminated MDF board of exterior grade size 1220LX610WX760H with 4mm thick half round beading all round of table Tublar/Allwyn steell top as per drg & directed. |
| 36 | S&F New lock of 4lever with duplicate key of approved quality. (Make of lock : Godrej/Harrison/Link/Lico) |
| 37 | Repair of u/s drawer as shown on drg and directed by Engr-In-Charge. |
| 38 | S&F of Rubber Caps |
| 39 | M&L for two or more coat spray painting of synthetic enamel paint on old painted surface with high class finish, including necessary scrapping, denting/welding and leveling with filling paste as specified & directed by Engr-In-Charge. (Make of lock: Asian/ Berger/ Salimar/MRF). |
| 40 | Almirah steel med (FD 67/1032) |
| 41 | S & F Lock 7 lever with duplicate keys components of Almirah steel med including dismantling unservicable one all as specified and as directed(Make of Lock- Godrej/Harrison/Link/Lico) |
| 42 | S & F Handle 100 mm size chromium plated Heavy components of Almirah steel med including dismantling unservicable one all as specified and as directed. |
| 43 | S & F 3 way locking device with necessary fittings and painted with one coat of synthetic enamel paint of approved shade & quality over a coat of primer. |
| 44 | S & F leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of approved shade & quality over a coat of primer. |
| 45 | S & F door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with 7 lever lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of directed shade by Engr-in-Charge over a coat of primer inside and outside Two coat of spray painting of Hammertone paint (pattern of hammer tone shall be 0.06 gram silicon/kg) shall apply after preparation of surface all as specified and shown on drawing.Note for steel painting;- All steel surface shall be done with spray painting)(Make of lock : Godrej/Harrison/Link/Lico) |
| 46 | S & F shelves made of 1mm thick CRCA sheet welded/riveted and painted with one coat of synthetic emamel paint of directed shade by Engr-in-Charge over a coat of primer. |
| 47 | Preparation of old painted inner steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed.Note: Paint shall be make of (Make of lock: Asian/ Berger/ Salimar/MRF). and shade of colour as per direction of Engr-in-Charge. |
| 48 | Preparation of old painted outer steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) of approved quality including dents/bends all as specified and as directed.Note Paint shall be make of (Make of Paint: Asian/ Berger/ Salimar/MRF). Vapcoure and shade of colour as per direction of Engr-in-Charge. |
| 49 | Chair steel tubular with/ without arms (FD-75 M) |
| 50 | S & F of suitable size new synthetic foam of 75mm thick with 32 density for seat duly coverd with synthteic tepastry/leatheratte raxine of approved shade and quality fitted on 12 mm BWR Plywoood in lieu of old Seat frame of Chair steel tubular with/ without Hnadle fixed with screws 4 Nos and nuts to the chair frame alongwith MS flat (whereever required)complete all as per drawing. including dismantling unservicable one all as specified and as directed. |
| 51 | S & F of suitable size new synthetic foam of 75mm thick with 32 density for seat & Back duly coverd with synthteic tepastry/leatheratte raxine of approved shade and quality fitted on 12 mm BWR Plywoood in lieu of old Seat frame of Chair steel tubular with/ without Hnadle fixed with screws 4 Nos and nuts to the chair frame alongwith MS flat (whereever required)complete all as per drawing. including dismantling unservicable one all as specified and as directed. |
| 52 | S & F Handle made of Teak wood duly paint of approved shade and quality synthetic enameled and fixed to the chair tubular with arms with screws of suitable size complete all as per drawing including dismantling unservicable one all as specified and as directed. |
| 53 | S & F MS Flat 4mm thick welded/Screwed at four corner at bottom of the seat only to support and screwed with the seat at two places complete all as per drawing. including dismantling unservicable one all as specified and as per direction of Engr-in-Charge. |
| 54 | M&L for preparation of sufaces and painting with synthetic enamel paint BL Greay colour/apporoved shade to chair steel tubular with without arms including 04 Nos of PVC bushes to the bottom of the chair frame and 02 Nos of PVC caps on the top of the frame complete all as specified and directed. (Make of Paint: Asian/ Berger/ Salimar/MRF) |
| 55 | Almirah large 1/2 H 1/2S steel (FD 67) FD-243 |
| 56 | S & F Lock 7 lever with duplicate keys components of Almirah steel med including dismantling unservicable one all as specified and as directed(Make of lock - Link,Lico,Harrison,Godrej) |
| 57 | S & F Handle 100 mm size chromium plated Heavy components of Almirah steel med including dismantling unservicable one all as specified and as directed. |
| 58 | S & F 3 way locking device with necessary fittings and painted with one coat of synthetic enamel paint of approved shade & quality over a coat of primer. |
| 59 | S & F leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of approved shade & quality over a coat of primer. |
| 60 | S & F door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with 7 lever lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of directed shade by Engr-in-Charge over a coat of primer inside and outside Two coat of spray painting of Hammertone paint (pattern of hammer tone shall be 0.06 gram silicon/kg) shall apply after preparation of surface all as specified and shown on drawing.Note for steel painting;- All steel surface shall be done with spray painting)(Make of lock - Link,Lico,Harrison,Godrej) |
| 61 | S & F shelves made of 1mm thick CRCA sheet welded/riveted and painted with one coat of synthetic emamel paint of directed shade by Engr-in-Charge over a coat of primer. |
| 62 | Preparation of old painted inner steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed.Note: Paint shall be make of (Make of Paint: Asian/ Berger/ Salimar/MRF)and shade of colour as per direction of Engr-in-Charge. |
| 63 | Preparation of old painted outer steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) of approved quality including dents/bends all as specified and as directed.Note Paint shall be make of (Make of Paint: Asian/ Berger/ Salimar/MRF) Vapcoure and shade of colour as per direction of Engr-in-Charge. |
| 64 | Almirah steel med 1/2 Hanging ,1/2 Shelves (FD 1034) |
| 65 | S & F Lock 7 lever with duplicate keys components of Almirah steel med including dismantling unservicable one all as specified and as directed(Make of lock - Link,Lico,Harrison,Godrej) |
| 66 | S & F Handle 100 mm size chromium plated Heavy components of Almirah steel med including dismantling unservicable one all as specified and as directed. |
| 67 | S & F 3 way locking device with necessary fittings and painted with one coat of synthetic enamel paint of approved shade & quality over a coat of primer. |
| 68 | S & F leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of approved shade & quality over a coat of primer. |
| 69 | S & F door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with 7 lever lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of directed shade by Engr-in-Charge over a coat of primer inside and outside Two coat of spray painting of Hammertone paint (pattern of hammer tone shall be 0.06 gram silicon/kg) shall apply after preparation of surface all as specified and shown on drawing.Note for steel painting;- All steel surface shall be done with spray painting)(Make of lock - Link,Lico,Harrison,Godrej) |
| 70 | Preparation of old painted inner steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed.Note: Paint shall be make of (Make of Paint: Asian/ Berger/ Salimar/MRF) and shade of colour as per direction of Engr-in-Charge. |
| 71 | Preparation of old painted outer steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) of approved quality including dents/bends all as specified and as directed.Note Paint shall be make of (Make of Paint: Asian/ Berger/ Salimar/MRF) Vapcoure and shade of colour as per direction of Engr-in-Charge. |
| 72 | Repair/Relacement of following u/s parts of \\"Almirah glazed steel \\" with suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. FD 104(M) |
| 73 | S&F New lock of 6 lever with duplicate key of approved quality. (Make: Godrej/Harrison/Link/Lico) |
| 74 | S&F new shelves made out of 1.00 mm thick MS sheet fixed and welded where required. |
| 75 | S&F new Chromium Plated handles complete with nut and bolt as approved by GE. |
| 76 | S&F new hinges (75mm). |
| 77 | S&F of new legs made out of 1.00 mm thick MS sheet to match the original as shown on drg and directed by Engr-In-Charge. |
| 78 | S&F of suitable pattern MS clamps for holding of almirah shelves. |
| 79 | S&F of new glasses of existing shape & size as shown on drg and directed by Engr-In-Charge. |
| 80 | S&F new bush (chakri) of suitable pattern for the locking system. |
| 81 | S&F new locking device with plunger rod of suitable pattern to the locking system of Almirah steel. |
| 82 | Preparation of old painted inner steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed.Note: Paint shall be make of (Make of Paint: Asian/ Berger/ Salimar/MRF) and shade of colour as per direction of Engr-in-Charge. |
| 83 | Preparation of old painted outer steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) of approved quality including dents/bends all as specified and as directed.Note Paint shall be make of (Make of Paint: Asian/ Berger/ Salimar/MRF) Vapcoure and shade of colour as per direction of Engr-in-Charge. |
| 84 | Repair/Relacement of following u/s parts of \\"Book Case glass front steel\\" with suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge.FD-90(m) FD-1028 |
| 85 | S&F New lock of 4 lever (set of 4 lock) with duplicate key of approved quality. (Make: Godrej/Harrison/Link/Lico) |
| 86 | S&F new CP handles complete with nut and bolt of standard size. |
| 87 | Repair of u/s sliding shutter as shown on dry |
| 88 | S&F of new glasses of 4mm thick best quality ISI marked as specified & directed. |
| 89 | Preparation of old painted inner steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed.Note: Paint shall be make of (Make of Paint: Asian/ Berger/ Salimar/MRF) and shade of colour as per direction of Engr-in-Charge. |
| 90 | Preparation of old painted outer steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) of approved quality including dents/bends all as specified and as directed.Note Paint shall be make of (Make of Paint: Asian/ Berger/ Salimar/MRF) Vapcoure and shade of colour as per direction of Engr-in-Charge. |
| 91 | Locker Bed Side Steel (FD-1029, FD-257) |
| 92 | S & F Hasp and Staple of 100 mm size chromium plated Heavy components of Locker steel including dismantling unservicable one all as specified and as directed. |
| 93 | S & F Hasp & stapple chromium plated components of Locker steel including dismantling unservicable one all as specified and as directed. |
| 94 | S & F leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of approved shade & quality over a coat of primer. |
| 95 | S & F door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size, Haps and Staple of approved quality, painting with one coat of synthetic enamel paint shade as directed by Engr-in-Charge over a coat of primer inside and outside and Two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) shall be applied after preparation of surface all as specified and shown on drawing.Note:- All steel surface shall be done with spray painting andMake of Lock- Harrison/Rina/Link |
| 96 | Removing the existing worn out side holder with 20mm dia aluminium conduit pipe of locker bed side steel and S & F new side holder with 20mm alluminium conduit pipe as per existing. Shape and size shown on drawing all as specified and directed by Engr-in-Charge.FD-1029 |
| 97 | Removing the existing unserviceable legs & providing & fixing new legs made out of 1mm thick MS black sheet duly painted with Two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) shall after preparation of surface all as specified and shown on drawing directed by Engr-in-Charge. |
| 98 | Preparation of old painted inner steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed.Note: Paint shall be make of (Make of Paint: Asian/ Berger/ Salimar/MRF) and shade of colour as per direction of Engr-in-Charge. |
| 99 | Preparation of old painted outer steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) of approved quality including dents/bends all as specified and as directed.Note Paint shall be make of (Make of Paint: Asian/ Berger/ Salimar/MRF) Vapcoure and shade of colour as per direction of Engr-in-Charge. |
| 100 | Locker Bed Side Steel( SKD-562 ) |
| 101 | Removing the existing unserviceable legs & providing & fixing new legs made out of 1mm thick MS black sheet duly painted with Two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) shall after preparation of surface all as specified and shown on drawing directed by Engr-in-Charge.SKD-562 |
| 102 | Removing the existing unserviceable handle and S & F new handle chromium plated 100mm in Heavy patteren all as specified and directed by Engr-in-Charge.SKD-562 |
| 103 | 3 way locking device with necessary fittings and painted with one coat of synthetic enamel paint of approved shade & quality over a coat of primer. |
| 104 | Removing the existing worn out side holder and hanging conduit pipe of locker steel and S & F of new side holder and hanging conduit pipe as per existing shape and size shown on drawing and all as directed by Engr-in-Charge.SKD-562 |
| 105 | Taking down old unserviceable existing lock of locker steel and S & F new lock 7 lever duplicate key all as specified and directed by Engr-in-Charge. SKD-562(Make of lock - Link,Lico,Harrison,Godrej) |
| 106 | Removing the existing unseviceable hinges and S & F new hinges duly welded as per existing shape and size all as specified and directed by Engr-in-Charge.SKD-562 |
| 107 | S & F door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with 7 lever lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of directed shade by Engr-in-Charge over a coat of primer inside. And outside Two coat of spray painting of Hammertone paint ( pattern of hammertone shall be 0.06gr silicon/kg) Shall after preparation of surface complete all as specified and shown on drawing.Note :- All steel surface shall be done with spray painting and (Make of lock - Link,Lico,Harrison,Godrej) |
| 108 | Preparation of old painted inner steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed.Note: Paint shall be make of (Make of Paint: Asian/ Berger/ Salimar/MRF) and shade of colour as per direction of Engr-in-Charge. |
| 109 | Preparation of old painted outer steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) of approved quality including removal of dents/bends all as specified and as directed.Note:- Paint shall be make of (Make of Paint: Asian/ Berger/ Salimar/MRF) Vapcoure and shade of colour as approved by Engr-in-Charge. |
| 110 | Table 3'X2' Steel with/without drawar (FD-1008-1007) |
| 111 | S&F new top of 18/19mm prelaminated MDF board of exterior grade with 4mm thick half round beading all round of table office clk steel top as per drg & directed. |
| 112 | S&F Drawer made of 1mm CRCA sheet including painting with synthetic enamel paint of approved shade & quality over a coat of primer both inside and outside including preparation of surfaces and repairing inter locking system and providing new lock 4 lever to drawerand dismenteling of unsv one.(Make of lock - Link,Lico,Harrison,Godrej) |
| 113 | Removing old unserviceable frame/Leg and S & F New Frame/leg of existing size, shape complete all as specified and shown on drg and directed by Engr-in-Charge shape complete all as specified and shown on drg .All Joints duly welded/Screwed as per Drgs |
| 114 | Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coat of Olive green synthetic enamel paint including four Nos of hard rubber shoes. Paint should be Make of (Make of Paint: Asian/ Berger/ Salimar/MRF) approved by Engr-in-Charge. |
| 115 | Table steel 3' x 1½' examination (covered with 1mm thick black sun mica) FD -GE/PN/F-4 |
| 116 | Removing the existing unserviceable top of Table and S & F the same made of 18mm thick pre laminated MDF board of exterior grade both side teak finish duly as specified and as directed. |
| 117 | Removing old unserviceable frame/Leg and S & F New Frame/leg of existing size, shape complete all as specified and shown on drg and directed by Engr-in-Charge shape complete all as specified and shown on drg .All Joints duly welded/Screwed as per Drgs |
| 118 | Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coat of Olive green synthetic enamel paint including four Nos of hard rubber shoes. Paint should be Make of (Make of Paint: Asian/ Berger/ Salimar/MRF) approved by Engr-in-Charge. |
| 119 | Repair/Relacement of following U/S parts of \\" Form Without Back/Form with Back \\" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge.FD-77,FD 1027 |
| 120 | S&F new Seat of first class hard wood teak duly polished and fixed as per drg and directed. |
| 121 | S&F new Back of first class hard wood teak duly polished and fixed as per drg and directed. |
| 122 | S & F new Seat Frame of Exesting size made from 1.5mm thick 25 mm M/S tube as exestingduly welded |
| 123 | S & F new Legs of Exesting size made from 1.5mm thick 25 mm M/S tube as exestingduly welded |
| 124 | Tightening of complete form without back by suitable size nails & screw as directed by Engr-in-Charge on site. |
| 125 | M&L for two or more coats of spray painting and walnut polish on steel & wooden surface of form without back with high class finish, including necessary rubbing, denting and smoothness surfaces all as directed by engr in charge.(Make of Paint: Asian/ Berger/ Salimar/MRF) |
| 126 | Table computer Steel 1220x610x750 |
| 127 | S&F new top of 18/19mm prelaminated MDF board of exterior grade with 4mm thick half round beading all round of table office clk steel top as per drg & directed. |
| 128 | S&F new side plank of 18mm thick prelaminated MDF board as shown on drg. |
| 129 | S&F new keypad tray of 18mm thick prelaminated MDF board including beading. |
| 130 | S&F of new heavy duty mild steel ball bearing slides/telecscopic channel for smooth functioning of key board & drawer as approved by GE. |
| 131 | S&F of new bottom shelf of 18mm thick pre- laminated MDF duly of exterior grade both side teak finish as specified and as directed |
| 132 | S&F of new hard rubber shoes (black) |
| 133 | Tightening of complete table by suitable size nails & screw as directed by Engr-in-Charge on site. |
| 134 | M&L for two or more coats synthetic enamel BL Greay paint on steel frame surface with high class finish including necessary rubbing, denting, welding and smoothness surfaces all as directed by engr in charge.(Make of Paint: Asian/ Berger/ Salimar/MRF) |
| 135 | Rack steel large 6 Tier FD-129(M)/1038 |
| 136 | S & F following components of Rack steel 6 tier including dismantling unservicable one all as specified and as directed. MS angle iron of size 30 x 30 x 3mm thick, 1905mm long including painting with one coat of synthetic enamel paint od approved shade & quality over a coat of primer. |
| 137 | Shelves of size 760 x 915mm made of 1mm CRCA sheet including painting with one coat of synthetic enamel paint of approved shade & quality over a coat of primer. |
| 138 | Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat or more coat of synthetic enamel paint of approved shade & quality both inside and outside complete all as specified and as directed (Make of Paint: Asian/ Berger/ Salimar/MRF) |
| 139 | Book Shelf Open Steel Small /Large ( FD 69) |
| 140 | S & F following components of Book Shelf Open Steel Large and Small including dismantling unservicable one all as specified and as directed. MS angle iron of size 30 x 30 x 3mm thick, 1905mm long including painting with one coat of synthetic enamel paint of approved shade & quality over a coat of primer. |
| 141 | Shelves of size 760 x 915mm made of 1mm CRCA sheet including painting with one coat of synthetic enamel paint of approved shade & quality over a coat of primer. |
| 142 | Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat or more coat of synthetic enamel paint of approved shade & quality both inside and outside complete all as specified and as directed for Book Shelf Open Large(Make of Paint: Asian/ Berger/ Salimar/MRF) |
| 143 | Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat or more coat of synthetic enamel paint of approved shade & quality both inside and outside complete all as specified and as directed for Book Shelf Open Small(Make of Paint: Asian/ Berger/ Salimar/MRF) |
| 144 | Revolving chair with hand rest (TP) |
| 145 | S&F suitable new 12 mm thick hot pressed plywood complete to match the original seat as shown on drg. |
| 146 | S&F suitable new fabric & moulded polyurethane foam of 50mm thick with 32 density for seat. |
| 147 | S&F suitable new tapestry cloth/leatherite rexine (cloth/rexine shall not be less than 450/- per RM) alongwith PVC lipping all round the seat fixing as exesting |
| 148 | S&F suitable new 12 mm thick hot pressed plywood for back as shown on drg. |
| 149 | S&F suitable new fabric & moulded polyurethane foam of 50mm thick with 32 density for back. |
| 150 | S&F suitable new tapestry cloth/leatherite rexine (cloth/rexine shall not be less than 450/- per RM) alongwith PVC lipping all round the back. |
| 151 | S&F suitable hydraulic system with droplift mechanism of backrest adjusted as per existing shape & size. |
| 152 | S&F suitable MS bearing of existing shape & size of various type chair revolving steel. |
| 153 | S&F new wheeled 4/5 prong base of existing shape & size with nut & bolts to chair revolving steel of various types. |
| 154 | S&F suitable caster wheels of existing shape & size with nut & bolts. |
| 155 | Two or more coat painting of synthetic enamel paint on frame of Chair revolving with high class finishing including necessary welding and smoothness of surface. (Make of Paint: Asian/ Berger/ Salimar/MRF) |
| 156 | Charpoy OR steel FD- 220R |
| 157 | Removing old unserviceable plywood of sleeping charpoy and S & F new marine plywood of 12 mm thick BWR grade in both frame, ISI marked, Make: Archid ply/ century ply/ Green ply including fixing in position all as shown on drg with suitable size screws & cup washers all as specified and shown on drg and directed by Engineer-in-Charge |
| 158 | Removing old unserviceable long rail and S & F new Long Rail of existing size, shape all as specified and shown on drg with All Joints duly welded/screwed as per Drgs complete directed by Engineer-in-Charge |
| 159 | Removing old unserviceable Short Rail rail and S & F new Short Rail of existing size shape all as specified and shown on drg with All Joints duly welded/screwed as per Drgs complete directed by Engineer -in- Charge |
| 160 | Removing old unserviceable Legs and S & F legs converstion from Short Rail item No. 34.02 of existing size shape all as specified and shown on drg with All Joints duly welded/screwed as per Drgs complete directed by Engineer-in-Charge |
| 161 | Preparation of old painted outer steel sufaces by scraping with emary paper, cleaning, dusting and applying Two coat of spray painting of approved shade of approved quality paint (Make of Paint: Asian/ Berger/ Salimar/MRF) |
| 162 | S&F of uphlostray of aprroved quality and shade and letheratte raxine of Sofa Set double Seat(TP), Sofa Set Single Seat(TP) , Sofa Set 2 Seater SK-577 Sofa set 05 Seater make of Godrej including minor surface reparing whereverey required and polishing with lacquer polish for smoothness of surface as exesting and directed by Engr-in-charge. |
| 163 | Spray Painting two or more coats of synthetic enamel of approved shade paint on old painted surface to under mentioned items of steel furniture with high class finishing including necessary scrapping, denting ,welding and smoothness surfaces as shown on drg and directed by Engr-in-charge.(Make of Paint: Asian/ Berger/ Salimar/MRF) |
| 164 | Chair CBA special with hand rest. |
| 165 | Locker six door steel |
| 166 | Metal shelving Rack adjustable type small |
| 167 | Metal shelving rack adjustable type large |
| 168 | MNF frame all type |
| 169 | Rack side steel with four tray |
| 170 | Rack adjustable six tiers |
| 171 | Steel Cup board |
| 172 | Trestle store room Iron |
| 173 | Almirah steel med 1/2 Hanging ,1/2 Shelves Please Enable Macros to View BoQ information |
