Tender For Repair And Maintenance Of Certain Map And Other Furniture At Ge Ima Dehradun., Dehradun-Uttarakhand

TDR : 56077432

Tender Notice
BOQ

18 Days Left

Dehradun , Uttarakhand

Tender Brief : Tender For Repair And Maintenance Of Certain Map And Other Furniture At Ge Ima Dehradun.

Document Fees
₹ 500 /-

EMD
₹ 50000.0 /-

Tender Value
₹ 25 Lakhs /-

Submission Date
10-07-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Repair/Replacement of following U/S parts of \\"Chair Dining Special \\" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed . Drg PN/F/26
2	S&F of new Front legs
3	S&F of new Rear legs
4	S&F of new Front / rear rail (including holes for caning)
5	S&F of new Side rail (including holes for caning)
6	S&F of new Arm/handle
7	S&F of new Stiffener
8	Buffers
9	Canning of Seat of Chair Dining Spl before final coat of lacqure polish
10	Tightening of complete chair by suitable size nails & wood corner as directed by Engr-in-Charge on site.
11	M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
12	Reapir of Teapoy Verandah MAP ( FD/E6/MAP/17)
13	Repair/repalcement of old UNSV front/rear legs Teapoy verandah adjoing with exesting rails and mesh with new front/rear legs made out of 18mm MS square pipe (18 gauge) as shown on drg as directed.
14	Rubber shoes
15	Top made of 18mm thick pre-laminated MDF board one side teak face including provision of 4mm thick teakwood beading all around complete as dircetd by Engr-in Charge
16	Preparation of steel tubular frame surfaces with emery paper and applying two coat of synthetic enamel paint of approved shade & quality.
17	Charpoy OR steel FD/E6/MAP-II/01 FD- 220R
18	Removing old unserviceable plywood of sleeping charpoy and S & F new marine plywood of 12 mm thick BWR grade in both frame, ISI marked, Make: Archid ply/ century ply/ Green ply including fixing in position all as shown on drg with suitable size screws & cup washers all as specified and shown on drg and directed by Engineer-in-Charge
19	Removing old unserviceable long rail and S & F new Long Rail of existing size, shape all as specified and shown on drg with All Joints duly welded/screwed as per Drgs complete directed by Engineer-in-Charge
20	Removing old unserviceable Short Rail rail and S & F new Short Rail of existing size shape all as specified and shown on drg with All Joints duly welded/screwed as per Drgs complete directed by Engineer -in- Charge
21	Removing old unserviceable Legs and S & F legs converstion from Short Rail item No.3.02 of existing size shape all as specified and shown on drg with All Joints duly welded/screwed as per Drgs complete directed by Engineer-in-Charge
22	Preparation of old painted outer steel sufaces by scraping with emary paper, cleaning, dusting and applying Two coat of spray painting of approved shade of approved quality paint
23	Bed hard steel (FD/E6/MA/P/08)
24	S & F following components of Bed hard steel including dismantling unservicable one all as specified and as directed.12mm thick BWR phenol bonded commercial plywood on top of the bed.Make : Greenply/Archid Ply/Century Ply
25	Head Board 18mm thick prelaminated particle board including 04mm PVC beading.
26	Foot Board 18mm thick prelaminated particle board including 04mm PVC beading.
27	Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coat of Black synthetic enamel paint including four Nos of hard rubber shoes.
28	S/F FMN Set duly welded as per directed by Engr-in-Charge
29	Repair/Replacement of following U/S parts of \\"Computer chair revolving/high back and med back\\" with suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge Drg( FD/E6/MAP/01)
30	S&F suitable new 12 mm thick hot pressed plywood complete to match the original seat as shown on drg.
31	S&F suitable new fabric & moulded polyurethane foam of 50mm thick with 32 density for seat.
32	S&F suitable new tapestry cloth/leatherite rexine (cloth/rexine shall not be less than 350/- per RM) alongwith PVC lipping all round the seat fixing as exesting
33	S&F suitable new 12 mm thick hot pressed plywood for back as shown on drg.
34	S&F suitable new fabric & moulded polyurethane foam of 50mm thick with 32 density for back.
35	S&F suitable new tapestry cloth/leatherite rexine (cloth/rexine shall not be less than 350/- per RM) alongwith PVC lipping all round the back.
36	S&F suitable new armrest made of black integral skin polyurethane & hardness with nuts & bolts.
37	S&F suitable hydraulic system with droplift mechanism of backrest adjusted as per existing shape & size.
38	S&F suitable MS bearing of existing shape & size of various type chair revolving steel.
39	S&F new wheeled 4/5 prong base of existing shape & size with nut & bolts to chair revolving steel of various types.
40	S&F suitable caster wheels of existing shape & size with nut & bolts.
41	Two or more coat painting of synthetic enamel paint on frame of Chair computer with high class finishing including necessary welding and smoothness of surface. (Make of paint- Asian/Berger/Shalimar/MRF)
42	Repair/Replacement of following u/s parts of \\"Chair dining MAP Officer\\" with suitable new parts (teak wood) of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge (FD/MAP-II/04)
43	S&F of new front legs.
44	S&F of new rear legs.
45	S&F of new stiffeners.
46	Replacement of old torn u/s cloth of seat with new synthatic tapestry cloth of best quality not less than Rs. 350/mtr as approved by GE, along with new markin cloth of matching colours as per drg or as directed.
47	Repair/Replacement of u/s plywood of seat with 8mm new comercial plywood.
48	Replacement of u/s foam of seat with new foam of 75mm thick with 40 density and fixing it with seat as per drg or as directed.
49	S&F of new Buffers
50	Tightening of complete chair by suitable size Bambo Skewers & wood corner as directed by Engr-in-Charge on site.
51	M&L one or more coat walnut wooden/teak wood polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
52	Repair/replacement of following u/s parts of \\" Table bed side MAP\\" with suitable new parts of existing shape & size complete to match the original as shown on drg and all directed by Engr-In-Charge. (FD/E6/MAP/15)
53	S&F new top of existing size made of 18mm thick prelaminated MDF board with 4mm thick teak wood half round beading all round of table top.
54	S&F different new parts of small drawers : Top/Side/Bottom of existing shape and size made of 18mm thick prelaminated MDF board & 12 mm thick commercial ply wood with 4mm thick teak wood half round beading.
55	S&F different new parts of large drawers : Top/Side/Bottom of existing shape and size made of 18mm thick prelaminated MDF board & 12 mm thick commercial ply wood with 4mm thick teak wood half round beading.
56	S&F suitable size new back/base of table bed side, made out of 6 mm thick commercial ply wood duly screwed as shown on drg as directed.
57	S&F suitable size new sides of table bed side, made out of 18mm thick prelaminated MDF board duly screwed as shown on drg as directed.
58	S&F of new heavy duty mild steel ball bearing slides/telecscopic channel for smooth functioning of drawer as approved by GE.
59	S&F of new handle for drawer of table bed side MAP as approved by GE.
60	S&F of new hard rubber shoes (black) to legs of table bed side MAP as approved by GE.
61	Repair/repalcement of old u/s front legs of table bed side with new front legs made out of 18mm MS square pipe (18 gauge) as shown on drg as directed.
62	Repair/repalcement of old u/s rear legs of table bed side with new front legs made out of 18mm MS square pipe (18 gauge) as shown on drg as directed.
63	Tightening of complete table by suitable size nails & screw as directed by Engr-in-Charge on site.
64	M&L for two or more coats walnut/lacquere polish for all beading and view portion of table Bed Side match with MDF grains and synthetic enamel black paint on wooden/steel frame surface with high class finish including necessary rubbing, denting, welding and smoothness surfaces all as directed.
65	Repair/Replacement of following U/S parts of \\"Table Dressing (Gents)\\" with suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge (FD/E6/MAP/16)
66	S&F suitable new 5mm thick looking mirror (Make- Saint Gobin/ Modi Guard) with back supported by 06mm plywood of existing shape & size with suitable nut & bolts.
67	S&F suitable new 12mm thick back ply of box .
68	S&F new top/base of table dressing made out of 18/19mm thick prelaminated MDF board ,one side teak finish and other side white.
69	S&F new side planks of table dressing made out of 18/19mm thick prelaminated MDF board ,one side teak finish and other side white.
70	S&F of new 05 mm thick plain glass self in table dressing as shown on drg.
71	S&F complete new beading of 4mm thick and fixed with headless nail.
72	Tightening of complete table by suitable size nails as directed by Engr-in-Charge on site.
73	M&L for two or more coats walnut/lacquere polish for all beading and view portion of table dressing match with grains
74	Repair/Replacement of following U/S parts of \\"Table Dressing (ladies) with Stool \\" with suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. (FD/MAP-II/07)
75	S&F suitable new electro copper plated mirror of polished sheet glass of first class quality ISI marked size 1220x380x5mm thick as approved by GE.
76	S&F different new parts of drawers : Top/Side/Bottom of existing shape and size made of 18mm prelaminated MDF board & 12 mm thick ply wood with 4mm thick teak wood half round beading as per drg & directed.
77	S&F suitable new frame of first class hard wood (Teak) including 6mm thick ply wood for back side of mirror duly fixed with frame as per drg and as directed by Engr-in-Charge
78	S&F suitable new top of table dressing ladies (box) of prelaminated MDF board of 18/19mm thick with 4mm thick half round teak wood beading.
79	S&F suitable new side planks of table dressing (box) of prelaminated MDF board of 18mm thick with 4mm thick half round teak wood beading.
80	S&F suitable new door plank of table dressing (box) of prelaminated MDF board of 18mm thick with 4mm thick half round teak wood beading.
81	S&F suitable new bottom (box) of 12mm thick plywood as shown on drg.
82	S&F suitable new stainless steel piano hinges and one nos magnetic catcher as shown on drg.
83	S&F of new heavy duty mild steel telecscopic channel for smooth functioning of drawer as approved by GE.
84	S&F suitable new 50 mm long 'D' shaped stainless steel handle as approved by GE.
85	S&F suitable new 75 mm long 'D' shaped stainless steel handle as approved by GE.
86	S&F suitable new bottom of 06mm thick plywood for stool dressing (box) as shown on drg.
87	S&F suitable new 12mm th ply openable shutter for stool dressing (box) as shown on drg.
88	S&F new cushion foam of 75mm thick and 40 density for seat of stool dressing (box) as shown on drg.
89	S&F new leatherite cloth for seat of stool dressing (box) as shown on drg as approved by GE.
90	S&F suitable new heavy duty revolving nylon double wheels for stool dressing (box) as shown on drg.
91	S&F suitable new front plank for stool dressing (box) of prelaminated MDF board of 18/19mm thick with 4mm thick half round teak wood beading.
92	S&F suitable new back plank for stool dressing (box) of prelaminated MDF board of 18/19mm thick with 4mm thick half round teak wood beading.
93	S&F suitable new wooden battern (1\\" x 1\\")
94	S&F suitable size new side plank for stool dressing (box) of prelaminated MDF board of 18mm thick with 4mm thick half round teak wood beading.
95	Tightening of complete table dressing by suitable size nails and screw as directed by Engr-in-Charge on site.
96	M&L for two or more coats walnut/lacquere polish for all beading and view portion of table dressing match with grains
97	Repair/replacement of following u/s parts of \\"Computer table\\" with suitable new parts of existing shape & size complete to match the original as shown on drg and all directed by Engr-In-Charge (FD/E6/MAP/03 GE/PN/23)
98	S&F new top of 18mm thick prelaminated MDF board with 1mm thick PVC beading.
99	S&F new side plank of 18mm thick prelaminated MDF board as shown on drg.
100	S&F new mouse tray of 18mm thick prelaminated MDF board with both side sliding arrangement, including beading.
101	S&F new keypad tray of 18mm thick prelaminated MDF board including beading.
102	S&F of new heavy duty mild steel ball bearing slides/telecscopic channel for smooth functioning of key board drawer as approved by GE.
103	S&F new drawer of 18mm thick prelaminated MDF board with both side sliding arrangement including beading.
104	S&F of new bottom shelf of 18mm thick pre- laminated MDF board including beading .
105	S&F of new hard rubber shoes (black)
106	Tightening of complete table by suitable size nails & screw as directed by Engr-in-Charge on site.
107	M&L for two or more coats synthetic enamel black paint on steel frame surface with high class finish including necessary rubbing, denting, welding and smoothness surfaces all as directed by engr in charge.(Make of paint- Asian/Berger/MRF/Shalimar)
108	Repair/Replacement of following u/s parts of \\"TV trolly\\" with suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge.FD/E6/MAP/04( R )
109	S&F of new top of 18 mm thick prelaminated MDF board including 4mm thick teak wood half round beading all round of top as directed.
110	S&F of new bottom / side planks of 18 mm thick prelaminated MDF board including 4mm thick teak wood half round beading as shown on drg as directed.
111	S&F of shutters shall be of plain glass 5.5 mm thick duly fitted with stainless steel hinges of reqd length as per drg or as directed by Engr-in-charge.
112	S&F of magnetic catcher shall be provided as shown on drg as directed.
113	S&F of coasters made of stainless steel body with hard rubber roller as shown on drg as directed.
114	Tightening of complete trolly by suitable size nails & screw as directed by Engr-in-Charge on site.
115	M&L for two or more coats walnut/lacquere polish for all beading and view portion of table dressing match with grains
116	Replacement of old torn u/s Mattress cover with new required size cover of best quality cloth, cloth should not be less then Rs 150/- per meter, including a long side TKK chain fixed properly on the mattress as approved by GE. (TP)
117	Replacement of old torn u/s Pillow cover with new required size cover of best quality cloth (white), cloth should not be less then Rs 200/- per meteras approved by GE.(TP)
118	Repair/Replacement of following U/S parts of \\"Chair Easy DC/Chair Easy with DRC\\" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. DB-3972 & DB-4089
119	S&F of new Front legs
120	S&F of new Rear legs
121	S&F of new Front /back rails (including holes for caning)
122	S&F of new Side rails (including holes for caning)
123	S&F of new Arm/Handles
124	S&F of new Stiffeners
125	Buffers
126	S&F new 8mm Plywood of Seat & Back of Chair Easy DC after final coat of lacqure polish.
127	Tightening of complete chair by suitable size nails & wood corner as directed by Engr-in-Charge on site.
128	M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
129	Canning of Seat of Chair Easy DC before final coat of lacqure polish
130	Canning of back of Chair Easy DC before final coat of lacqure polish
131	Repair/Replacement of following U/S parts of \\"Stool Dressing\\" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge.FD 252, 282
132	S&F of new Legs
133	S&F of new Stiffeners
134	S&F of new Side rails (including holes for caning)
135	Buffers
136	Tightening of complete chair by suitable size nails & wood corner as directed by Engr-in-Charge on site.
137	M&L one or more coat walnut wooden/teak wood polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
138	Canning of Seat of Stool dressing before final coat of lacqure polish
139	Repair and re canning of \\"Chair varandha\\" as per existing shape & size complete to match the original as per drg and all directed by Engr-In-Charge. FD-256
140	S & F in repair MS conduit 20mm bore,1.6mm thick, upto 30cm length, made to shape, duly welded components of Chair verandah all as specified and as directed.
141	Tuck welding to broken legs and frames of chair verandah
142	S&F of new PVC shoes 20mm dia at bottom of legs.
143	Preparation of steel tubular frame surfaces with emery paper and applying two coat of synthetic enamel paint of white colour of approved quality and recaning the chair fully both seat and back with new plastic cane, white, half round of size 4mm wide including providing new suitable PVC shoes of approved quality and colour(.Make of paint- Asian/Berger/Shalimar/Godrej)
144	Re-canning of chair verandah both seat and back with 4/5mm wide and half round superior quality white plastic cane as approved by GE
145	Repair/Relacement of following U/S parts of \\"Chair Writing MAP/Chair Visitor\\" with suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge.FD/E6/MAP/12
146	S&F suitable new12 mm thick hot pressed plywood for seat.
147	S&F suitable new moulded polyurethane foam of 50mm thick with 32 density for seat.
148	S&F suitable new synthetic tapestry/leatheritte raxine cloth as approved by GE (Cloth shall not be less than 450/- per RM) alongwith PVC lipping all round the seat.
149	S&F suitable 12 mm thick hot pressed plywood for back.
150	S&F suitable fabric & moulded polyurethane foam cushion 50mm thick & 32 mm density for back
151	S&F suitable new synthetic tapestry/leatheritte raxine cloth as approved by GE (Cloth shall not be less than 450//- per RM) alongwith PVC lipping all round the back
152	S&F suitable new armrest made of black integral skin polyurethane & hardness with nuts & bolts.
153	S&F suitable new rubber stopper.
154	Two or more coat painting of synthetic enamel paint on frame of chair writing/chair visitor with high class finishing including necessary scrapping / welding and smoothness of surface.(Make of paint- Asian/Berger/Shalimar/MRF)
155	TABLE CENTRE 2 TIER FD-375
156	10 mm thick Plate Tinted Glass duly edging with for FD-375 note Glass edge must be polished and smooth .(Smoke/Black Colour)
157	S & F PVC Shoe
158	Vaccum Rubber Shoe
159	REPAIRS TO SIDE BOARD FD-371, 4241
160	Removing of unserviceable drawer and supply & fixing new drawer as per drawing as to match with exesting
161	Removing of unserviceable knobs/Handle and S&F new Handle/knobs as directed by Engr-in Charge
162	Removing of unserviceable top and S&F new top of 18/19 mm thick pre laminated MDF board exterior Gde I, type II confirming to IS-12823 as per drg.
163	Removing of old unserviceable plywood of back side and S&F of new 4mm thick commercial plywood ISI marked as per drg.
164	Removing of old unserviceable side supplied and fix new side pre limanited MDF board 18 mm thick as per drg and as directed by Engr-in Charge
165	Removing of old broken/unserviceable doors and S&F of new door made of 18 mm MDF board one side teak face & 4mm thick teak wood beading alround duly fitted with piano type hinges, all as directed by Engineer-in-Charge.
166	M&L lacquer polishing with high class finish to complete side board whereever requred as to match with grains of MDF boards.
167	Table Dining 6 Person 1500mmx900mm(Drawing no.FD/MAP-II/03)
168	S&F following components of Table including dismantling unservicable one all as specified and as directed.Leg Shall be made of first class teak wood
169	Top made of 18mm thick pre-laminated MDF/Particle board one side teak face including provision of 4mm thick teakwood beading all around complete.
170	Short Rail shall be made of first class teak wood as directed
171	Long Rail shall be made of first class teak wood as directed
172	M&L one or more coat walnut wooden/teak polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
173	Buffers
174	Sofa Set 5 Seater(1+3+1) with cushioned.(Drawing no.FD/MAP-II/02)
175	M&L for removing the old worn/torn out cushion from sofa sets 5 seats and tapesty cloth from seat and back of sofa and providing new cushion of 32 density cool foam of size 545 x 530x110mm thick including provision tapesty cloth of approved shade & quality Make : sleepwell/Feather foam
176	M&L for removing the old worn/torn out tapesty cloth cover from seat foam and back foam of sofa from sofa sets 5 seats and providing new tapestry cloth cover of approved shade & quality (cost of tapestry cloth shall be more than Rs. 350/- per metre) with zip on one side of cover for easy removing/closing purposes etc to cover the foam of size 545 x 530x110mm thick complete all as directed.
177	M&L for removing unserviceable/ broken Front Legs of Sofa Set 5 Seater(1+3+1) with cushioned.and S&F New Front Legs to match the original complete all as specified and directed.
178	M&L for removing unserviceable/ broken rear legs of Sofa Set 5 Seater(1+3+1) with cushioned. and S&F new rear leg to match the original complete all as specified and directed.
179	M&L for removing unserviceable seat plywood of Sofa Set 5 Seater(1+3+1) with cushioned. and S&F new plywood of 12 mm BWR to match the original complete all as specified and directed.
180	M&L for removing unserviceable back plywood of Sofa Set 5 Seater(1+3+1) with cushioned. and S&F back plywood of 12 mm BWR to match the original complete all as specified and directed.
181	M&L for removing unserviceable/ broken back rail for three seater of Sofa Set 5 Seater(1+3+1) with cushioned. and S&F new back rail to match the original complete all as specified and directed.
182	M&L for removing unserviceable/ broken front rail for three seater of sofa set 5 seater and S&F new front rail to match the original complete all as specified and directed.
183	M&L for removing unserviceable/ broken hand rest of Sofa Set 5 Seater(1+3+1) with cushioned. and S&F New hand rest to match the original complete all as specified and directed.
184	M&L one or more coat walnut wooden/teak wood polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
185	SOFA SET Single Seater (TP) M&L for removing the old worn/torn out cushion from SOFA SET Single Seater (TP) and tapesty cloth from seat and back of sofa and providing new cushion of 32 density cool foam of size 560 x 530x110mm thick including provision tapesty cloth of approved shade & quality Make : sleepwell/Feather foam
186	M&L for removing the old worn/torn out tapesty cloth cover from seat foam and back foam of sofa from SOFA SET 5 SEATER Special (TP) and providing new synthetich tapestry cloth cover of approved shade & quality (cost of tapestry cloth shall be more than Rs. 500/- per metre) with tapering as existing
187	M&L for removing unserviceable/ broken Front Legs of SOFA SET 5 SEATER Special (TP) and S&F New Front Legs to match the original complete all as specified and directed.
188	M&L for removing unserviceable/ broken rear legs of SOFA SET 5 SEATER Special (TP)and S&F new rear leg to match the original complete all as specified and directed.
189	M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
190	Repair/replacement of following u/s parts of \\"Chairs steel tubular with arms / without arms\\" with suitable new parts of existing shape & size complete to match the original as shown on drg and all directed by Engr-In-Charge
191	S&F of new seat & back of chair tubular steel with arm of 1st class hard wood (shisham), duly canned with best quality cane alongwith black shade french/lacquer polish.
192	S&F new handle of teak wood size 452x50x25mm for chair steel tubular with arms duly polished with French polish of black shade.
193	S&F of Rubber shoes
194	M&L for provide 02Nos flat iron (25x5mm) support to each chair under bottom of seat welded with frame complete all as specified and directed.
195	Tightening of complete chair by suitable size nails and screw as directed by Engr-in-Charge on site.
196	M&L for two coats of spray painting with synthetic enamel paint as required on steel/iron surface with high class finishing including necessary rubbing, denting/welding and smoothness surfaces all as directed by engr in charge.
197	File Cabinet 4 drawer (TP)
198	S&F New lock of 4lever with duplicate key of approved quality. (Make: Godrej/Harrison/Link/Lico)
199	Preparation of old painted inner steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed.Note: Paint shall be make of Asian/Berger/Shalimar/MRF and shade of colour as per direction of Engr-in-Charge.
200	Preparation of old painted outer steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed.Note: Paint shall be make of make of Asian/Berger/Shalimar/MRF and shade of colour as per direction of Engr-in-Charge.
201	Repair/Relacement of following U/S parts of \\"Charpoy folding steel\\" with suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge
202	S&F suitable new 12mm thick BWR phenol bonded commercial ply of size 1800x900mm, fitted in two pieces with suitable nut & bolt. (Make-Century/Archid/Greenply)
203	Tightening of complete charpoy by suitable size nut & bolt as directed by Engr-in-Charge on site.
204	S&F suitable size new PVC shoes as approved by GE.
205	Two or more coat painting of synthetic enamel paint on charpoy folding steel frame with high class finishing including necessary scrapping/ welding and smoothness of surface.
206	Repair/Replacement of following U/S parts of \\"Chair Dining JCO's /ORs\\" with suitable new parts (teak wood) of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge(FD/MAP-II/05)
207	S&F of new 4mm thick PVC seat with holes & is not less than 0.500 kgs alongwith wooden support in the middle as directed by Engr-in-Charge. (Make-Amko/Cello)
208	S&F of new Buffers
209	S&F of new Front leg (teak wood)
210	S&F of new Rear legs (teak wood)
211	S&F of new Front/rear rail (teak wood)
212	S&F of new Stiffeners.
213	Tightening of complete chair by suitable size bamboo skewers & wood corner as directed by Engr-in-Charge on site.
214	M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
215	Repair/Replacement of following U/S parts of \\"Couch CB with Cushioned\\" with suitable new parts (teak wood) of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge(FD-(18)M
216	S&F suitable new 12 mm thick plywood complete match the original Seat as per existing shape and size in drg as directed by Engr-in- charge.
217	S&F suitable size new synthetic foam of 75mm thick with 32 density for seat.
218	S&F suitable new leatherised rexine of approved shade texture and quality of existing shape & size complete to match the original seat . (rexine shall not be less than 350/- per RM).
219	S&F suitable new synthetic foam of 50mm thick with 28 density for back.
220	S&F suitable new 12 mm thick plywood complete match the original back as per existing shape and size in drg as directed by Engr-in- charge.
221	S&F suitable new leatherised rexine of approved shade texture and quality of existing shape & size complete to match the original back . (rexine shall not be less than 350/- per RM).
222	S&F suitable size new ply & foam for handle as per existing shape and size, covered with thick matching colour rexine as shown on drg.
223	S&F suitable handrestr/Arms of teak wood .
224	S&F suitable front/rear leg of teak wood .
225	S&F Buffers
226	Tightening of complete table by suitable size nails made of bamboo & wood corner(whereever required) as directed by Engr-in-Charge on site.
227	M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
228	Repair/Replacement of following U/S parts of \\"All rows chair for VIP Seating \\" with suitable new parts (teak wood) of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge(TP)
229	S&F of new of 18/19 mm thick prelaminated MDF board including 4mm thick teak wood half round beading all round of Chair for VIP seating Writing pad as directed.
230	S&F suitable new moulded polyurethane foam of 50mm thick with 32 density for seat.
231	S&F suitable new synthetic tapestry/leatheritte raxine cloth as approved by GE (Cloth shall not be less than 450/- per RM) alongwith PVC lipping all round the seat.
232	S&F suitable 12 mm thick hot pressed plywood for back.
233	S&F suitable fabric & moulded polyurethane foam cushion 50mm thick & 32 mm density for back
234	S&F suitable new synthetic tapestry/leatheritte raxine cloth as approved by GE (Cloth shall not be less than 450//- per RM) alongwith PVC lipping all round the back
235	Two or more coat painting of synthetic enamel paint on frame of chair writing/chair visitor with high class finishing including necessary scrapping / welding and smoothness of surface. Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents
5	Click here to download tender document	Tender Documents

Also Visit

Tenders

Uttarakhand Tenders

Furniture Tenders

Furniture Items Tenders

Furnitures Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Repair And Maintenance Of Certain Map And Other Furniture At Ge Ima Dehradun., Dehradun-Uttarakhand

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Repair And Maintenance Of Certain Map And Other Furniture At Ge Ima Dehradun., Dehradun-Uttarakhand

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us