|
| 1 | Surface Excavation n exc 30 cm deep and averaging 15 Cm deep and getting out in any type of soil. |
| 2 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed. |
| 3 | Excavation over area n.exc 1.5m deep and getting out in any type of soil complete all as specified. |
| 4 | Excavating over areas, exc 1.5m but n exc 3.0m deep & getting out in any type of soil complete all as specified. |
| 5 | Excavating over areas, exc 3.0m but n exc 4.5m deep & getting out in any type of soil complete all as specified. |
| 6 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified. |
| 7 | Removing excavaed material (soil) n.exc. 150m and depositing where directed at a level n exc 1.5m above the starting point. |
| 8 | Demolition of cement concrete or lime concrete (unreinforced) in ground floors and Pavings not exc 15 cm thick (below or above ground level ) and removing the debris outside from defence land complete all as specified and directed . |
| 9 | M&L for Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 10 | M&L for providing, cement concrete type B-0 1:2:4 (using 12.5mm graded crushed stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clearspan, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed |
| 11 | M&L for PCC 1:2:4 type B-1 (using 12.5mm graded crushed stone aggregate) in copings, kerbs, channels, water trough and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed |
| 12 | M&L for Cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) in foundations, filling and mass-concrete, complete all as specified and as directed. |
| 13 | M&L for PCC in foundations, filling and mass-concrete type D-2 (1:4:8) using 40 mm graded crushed stone aggregate complete all as specified. |
| 14 | M&L for RCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate ) in beams, bands, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and directed. |
| 15 | M&L for precast reinforcement cement concrete 1:2:4, type B-1 using 20mm graded crushed stone aggregate, in cover slabs( for manholes etc.) chulla hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar (1:6) including providing 5nos 20 mm dia perforations, complete all as specified and directed. (Reinforcement shall be measured and paid separately). |
| 16 | M&L for Mild steel TMT bar 6 to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 17 | M&L for TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS (annealed) wire not less than 0.90mm dia complete all as specified and directed. |
| 18 | M&L for mild steel TMT bars but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, complete all as specified and directed. |
| 19 | Formwork to edges of concrete flats, treads, break in floors, windows cill, concrete railings, openings in concrete walls , floors and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, Horizontal or slopping and Similar Work exc 10cm but n exc 20 cm wide for finished fair and smooth surfaces, omplete all as specified and directed. |
| 20 | Demolition of brick work or stone/ boulder masonry built in cement mortar or cement lime mortar including all quions, wall, arches, pillars, man-holes, drain etc complete all as specified and directed. |
| 21 | M&L for brick work with sub class 'B' brick straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified & directed. |
| 22 | M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:4 complete all as specified. |
| 23 | M&L for brickwork with sub class B bricks 1:4 cement mortar straight or curved on plan n.exc 6m mean radius including making 100mm dia weep holes (8Nos) for recharge pit/septic tank/soakwell etc complete all as specified. |
| 24 | M&L for half brick work with burnt clay brick work with sub-class 'B' bricks having crushing strength not less than 75 Kg/Sqm, straight or curved on plan exceeding 6 m mean radius with old size bricks built in cement mortar 1:4, complete all as specified and as directed. |
| 25 | M&L for brick work with fly ash old size brick, straight or curved on plan exc 6.0 m mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 26 | M&L for brick work 'except brick' straight or curved on plan exc 6 m mean radius build in CM 1:6 all as specified. |
| 27 | Taking down cement plaster of any description and thickness on walls/ceilings etc including racking out joints, hacking for key, scrubbing down with water etc including necessary scaffolding up to four storeys height of bldgs if required and removing of debris out of MoD land complete all as specified and as directed. |
| 28 | M&L for rendering 10mm thick on fair faces of brickwork or cement surface in CM 1:4 finished even & smooth complete all as spd & directed. |
| 29 | M&L for rendering 15mm thick in CM 1:4 in two layers with backing coat 10mm thick and second coat of 5mm thick WPC (as per manufacturer’s instructions) on fair faces of brick work ,concrete surface of wall, fin, facia, chajjas, parapet and similar article finished surface even and smooth without using extra cement complete all as specified and as directed.(Note:- WPC shall be measured and paid separately) |
| 30 | Supply only Liquid Water Proofing Compound complete all as specified and as directed . |
| 31 | M&L for extra for forming fair finished drain or drain channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitred stopped ends etc, complete all as specified. |
| 32 | M&L for filling of brick bats/brokem bricks of size 40-80 mm in recharge pit, complete all as specified and directed |
| 33 | M&L for filling of stone aggregate of stone grit size 40-50 mm in recharge pit complete all as specified and directed |
| 34 | M&L for filling of stone aggregate of pea gravel size 5 to 10 mm in recharge pit, complete all as specified and directed |
| 35 | M&L for filling of course sand of size 2 to 4mm in recharge pit, complete all as specified and directed |
| 36 | Dismantling wrought iron or mild steel work of any description not otherwise provided for including grills, door, truss, gate, rafters, purlins etc |
| 37 | S&F MS framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410-W (Gde-E-250) quality-A complete all as specified and directed. |
| 38 | S&F MS work as in post and struts in fencing including cutting top to shape as directed, drilling wholes, noching for wire, embeded in concrete etc including all necessary drilling, bolting and welding with existing old structure etc and similar work |
| 39 | S&F galvanized to strands, steel brabed wire 2.24mm dia barbed with 2mm dia barbes at 75mm spacings and straining and fixing to any type of standard rails including securing or taying at croses with and provision of galvanized mild steel wire. |
| 40 | M&L preparation of new steel surface of any descripion over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.. |
| 41 | M&L for drilling/boring vertical bores with reverse rotary rig or any other suitable method as per latest engineering technology practice without casing pipe with 202mm dia bit to a depth upto existing water table or 8 to 10m deep (whichever is less) including all necessary work required for boring complete all as specified and directed. Note: (i) depth of boring shall be measured from depth of recharge pit. |
| 42 | M&L for uPVC perforated drainage pipe 200 mm dia placed in bores of recharge pit including putting inverted earthen pot at top, complete all as specified and directed. |
| 43 | M&L for earth filling, spreading and levelling in layers .exc. 25cm thick, well ramming including watering as required complete all as specified and directed. |
| 44 | M&L for reinforced concrete pipes, class NP-2, 150 mm dia laid in trenches and jointed complete with collars, complete all as specified and as directed. |
| 45 | Labour only for removing MS cage on recharge pit by demolition of bed blocks to carry out cleaning activities of pit and refixing painted MS cage with bed blocks and removing the debris outside from defence land, complete all as specified and as directed. |
| 46 | M&L for preparation of old painted steel surface of any description over 10cm in width or grith not otherwise described for and apply one coat of synthetic enamel paint, complete all as specified and directed. |
| 47 | Labour only cleaning of vegetation & desilting of reacharge pits including replace filter media layers of sand/pebbles/gravels to restore precolation, clear leaves and waste from the collection chamber and clean all inlet pipes, gutters to make ready to receive rain water and removing the debris outside from defence land, complete all as specified and as directed by Engr-in -charge. (Note- Measurement of filter media are measured & paid separately.) |
| 48 | Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 3,250.00 and any other reduction if any from quoted amount. Please Enable Macros to View BoQ information |
