|
| 1 | S&F for post top lantern LED light fitting 10 watts (Bollard) with cast aluminium spigot lid cover and clear acrylic cover with IP65 protection complete with all accessories including fixing arrangement on top surface of boundary wall or on pillar by providing GI pipe of suitable size and length as per site requirement and making good the distrubed portion to match with existing surface complete as in repair all as specified and directed. (Make:- Havells, Cat Part No. CONEBLS8WLED830PSYMTOPC with warm light /Crompton greaves, Cat No LBLSR-10-CDL with warm light or equivalent in Philips)(Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings to the Engineer-In-Charge.(b) Warranty certificate shall be submitted for LED light fitting as per standered format for minimum 50000 Hrs to the Engineer-In-Charge.(c) LED light fitting and drivers shall be of same make.(d) Material required for safety harness, ladder and T&P etc will be provided by the contractor without any extra cost. (e) Original purchas voucher & TC having GST No of LED light fitting complete with 1x 10 watts shall be submitted by the contractor to Engineer-in-Charge before taking any payment.) |
| 2 | M&L for MCB, FP capacity 32 Amps to 63 Amps, 240 volts with rupturing capacity 10 KA, 'C' series including providing thimble for out going cables complete all as specified and directed. |
| 3 | M&L for 40mm dia street light bracket made out of galvanized iron tubing (medium grade) of 1.5mtr long with complete all fittings such as nuts & bolts, washers as required, welding and flanges etc, fixed on steel tubular pole/PCC poles including taking down of old unserviceable bracket complete all as specified and directed. |
| 4 | M&L for 25mm dia street light bracket made out of galvanized iron tubing (medium grade) of 1.5mtr long with complete all fittings such as nuts & bolts, washers as required, welding and flanges etc, fixed on steel tubular pole/PCC poles including taking down of old unserviceable bracket complete all as specified and directed. |
| 5 | M&L for cable junction box with IP 66 protection (halogen free and weather proof) for outdoor installations of size 260 x 210 x 116 mm with terminals including SP, MCB of 6 Amp gland for cable, FI clamp of size 20x3 mm, nuts, bolts, washers, provision of connectors for connection of cables etc complete or all including taking down as specified or directed. |
| 6 | S&F for PVC insulated and PVC round sheathed, copper conductor (flexible) industrial cable 2.5 sqmm, three core 2 Run and 1.5 sqmm earthing cable in and including through GI tube of light grade of 15mm bore dia for connection of street light on pole / wall from over head conductor / junction box / DB including termination clip etc all as specified including taking down as directed by Engr-in-Charge. (Note :-Original purchase voucher of the item shall be submitted by the contractor before taking any payment duly verified and defeced by the Engr-in-Charge ) |
| 7 | Supply,laying, jointing and testing, XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 10 sqmm 4 core laid in trenches/ on wall, ducts, pipes, on poles and connection with necessary cables lugs, glands, suitable for mild steel saddle clips (were cable laid in ceilings/wall without cable duct) nut bolts complete after taking down old unserviceable cable including bricks etc. all as specified and directed.(Note :-(a) Excavation of earth work, removing, returning filling in, sand cushioning, concrete cable cover and protection GI pipe shall be measured and paid separately and length of cable shall be one length unless otherwise as directed by GE. (b) Original purchase voucher of the item shall be submitted by the contractor before taking any payment duly verified and defeced by the Engr-in-Charge ) . |
| 8 | S&F for flexible trailing XLPE insulated heavy duty eletric power cable with multi stranded copper conductor 1100 volts grade of size 2.5 sqmm 5 core trails alongside equipment like high mast , light cranes etc. after taking down old unserviceable cable complete. all as specified and directed. (Note :-Original purchase voucher of the item shall be submitted by the contractor before taking any payment duly verified and defeced by the Engr-in-Charge ) |
| 9 | Supply,laying, jointing and testing, XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 16 sqmm 4 core laid in trenches/ on wall, ducts, pipes, on poles and connection with necessary cables lugs, glands, suitable for mild steel saddle clips (were cable laid in ceilings/wall without cable duct) nut bolts complete after taking down old unserviceable cable including bricks etc. all as specified and directed.(Note :-(a) Excavation of earth work, removing, returning filling in, sand cushioning, concrete cable cover and protection GI pipe shall be measured and paid separately and length of cable shall be one length unless otherwise as directed by GE. (b) Original purchase voucher of the item shall be submitted by the contractor before taking any payment duly verified and defeced by the Engr-in-Charge ) |
| 10 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth not exceeding 10sqm on plan for laying of cable and foundation of poles stays and getting out in any type of soil complete all as specified and directed. |
| 11 | Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm (soil) thickness all as specified and directed. |
| 12 | Removing of excavated material (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed. |
| 13 | M&L for dry sand cushioning to underground cable, provided with a layer 8 cm thick before and 15 cm deep after laying and stretching jointing and testing the cable complete all as specified and as directed.(Note: Punned thickness of sand shall be measured and paid). |
| 14 | M&L for brick covering with width equal to length of brick as mechanical protection to cable using sub class ‘B’ bricks laid flat, size 230mm x 115mm x 75mm, complete all as specified and as directed. |
| 15 | M&L for PCC (1:3:6) (nominal mix) type C-2 (using 20mm graded crushed stone aggregates) as in all around the pole and including necessary formwork complete all as specified and directed. |
| 16 | M&L for PCC (1:2:4) type B2 using 20mm graded for padestal coping incl necessary formwork finished fair using extra cement with two coat of white wash after demolation/breaking of the existing defective/broken coping of any kind of street light complete all as specified and directed. |
| 17 | M&L for boring of holes under road, pavement, hard standing by trenchless technology/manual excavation as necessary including machine, tools etc as per site requirement complete all as specified and directed. |
| 18 | M&L for 40mm dia galvanized steel tubing (light grade) with complete all fittings such as elbow, unions, nipples, tees, bends, short pieces, connections, check-nuts, caps, plugs, diminishing pieces and flanges etc as in pole, crossing of roads, laid in trenches, fixed on walls for cable protection complete as in repair all as specified and directed. |
| 19 | M&L for steel tubular swaged poles errected to truly vertical position with 6mm thick mild steel base plate of size 300mm x300mm, welded to Pole, B-118 finial taper plug, bolts, nuts and screws, poles made out of ERW MS tubing conforming to IS-2713 Part-II, type 410-SP-22 (8.5m long) including drilling of holes of required size for fixing of cross arms, painting the exposed surfaces of pole with two coats of aluminum paint over a coat of red oxide zinc chrome primer and with two coats of black bituminous paint internally and portion embedded in concrete, making five black and white bands at lower portion of pole each 300mm wide at 300mm spacing alternately and marking pole number. with black paint at suitable height including taking down old unserviceable broken steel pole of 9 mtr long complete all as specified and directed.(Note :-(a) Necessary excavation of earth work, removing, returning filling in, PCC foundations of poles, coping etc shall be measured and paid separately. (b) Original purchase voucher of the item shall be submitted by the contractor before taking any payment duly verified and defeced by the Engr-in-Charge ) |
| 20 | M&L for preparation of old painted steel surface of LT Poles of height 8.5 / 9 mtrs height of LT OH line or street light steel tubular poles above ground level coping including cross arm channels, flat iron clamp in LT OH line by scrapping with wire brush and applying two coats of aluminium paint including pole numbering complete all as specified and directed by Engineer-in-Charge.(Note:- Numbering of LT/HT Steel tubular poles by writting letters of figures (Block, Roman, Italic or Indian) not exc. 10 cm hight. The numbering to be painted with high quality white paint on black colour base painted surface with round shape of dia 10 cm and cost of the same included in this item.) |
| 21 | M&Lfor preparation of old distempered / white wash / painted RCC Poles upto 11/9 mtrs height of street light poles above ground level incl coping with two coat of existing or as directed distemper including two coat of aluminium paint over iron surfaces such as cross arms, channels, Flat iron clamp, nuts, bolts, washers etc in LT OH line including writing pole numbers with black paint complete all as specified and directed by Engineer-in-Charge.(Note:- Numbering of LT/HT Steel tubular poles by writting letters of figures (Block, Roman, Italic or Indian) not exc. 10 cm hight. The numbering to be painted with high quality white paint on black colour base painted surface with round shape of dia 10 cm and cost of the same included in this item.) |
| 22 | S&F for replacement Astronomical Street Light time Switch alongwith suitable Power Contactor, MCB and Support Terminals should be enclosed in pole/wall mountable Enclosure made of Rust Proof, Electric Shock Proof, Termite proof and FR grade special moulding compound (Sintex make SMC Junction box) conforming to IP54.The Contactor, MCB and Circuit Wiring should suitable enough to take load of 12 kW load equally distributed over 3-phase .Contactor Rating: 40.Amps (4-pole).MCB (4-pole) Rating: 40.Amps (3 nos.)Make : Hager/ Siemens/ Schneider). (Note:- Original purchase voucher of the item shall be submitted by the contractor before taking any payment duly verified and defeced by the Engr-in-Charge ) |
| 23 | S&F for LED street light fitting 90 watts, made in pressure diecast housing with eppoxy power coated dark graphite grey colour finish, parismatic polycarbonate cover with individual LED lense with IP 65 complete with all accessories and necessary fixing arrangement on wall at any height including three core 0.5 sqmm copper cable from connector to fitting and after taking down old unserviceable light fittings of any type complete as in repeir all as specified and directed.(Make:- Crompton, Model No TRP-425-90-57-HL2-LM-NBK or Havells, Cat No UNDOWNBRIGHTSL90WLED757PASYBOPC or equivalent in Philips)(Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings to the Engineer-In-Charge.(b) Warranty certificate shall be submitted for LED light fitting as per standered format for minimum 50000 Hrs to the Engineer-In-Charge.(c) LED light fitting and drivers shall be of same make.(d) Material required for safety harness, ladder and T&P etc will be provided by the contractor without any extra cost. (e) Original purchas voucher & TC having GST No of LED light fitting complete with 1x 90 watts shall be submitted by the contractor to Engineer-in-Charge before taking any payment.) |
| 24 | S&F for LED street light fitting 70 watts, made in pressure diecast housing with eppoxy power coated dark graphite grey colour finish, parismatic polycarbonate cover with individual LED lense with IP 65 complete with all accessories and necessary fixing arrangement on wall at any height including three core 0.5 sqmm copper cable from connector to fitting and after taking down old unserviceable light fittings of any type complete as in repeir all as specified and directed. (Make:- Crompton, Model No TRP-421-70-57-SL-LM-NBK or Havells, Cat No UNDOWNBRIGHTSL70WLED757PASYBOPC or equivalent in Philips)(Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings to the Engineer-In-Charge.(b) Warranty certificate shall be submitted for LED light fitting as per standered format for minimum 50000 Hrs to the Engineer-In-Charge.(c) LED light fitting and drivers shall be of same make.(d) Material required for safety harness, ladder and T&P etc will be provided by the contractor without any extra cost. (e) Original purchas voucher & TC having GST No of LED light fitting complete with 1x 70 watts shall be submitted by the contractor to Engineer-in-Charge before taking any payment.) |
| 25 | S&F for LED building security luminaire fitting 30 watts, made in aluminium PDC housing with eppoxy power coated dark graphite grey colour finish, toughened glass cover cover with individual LED lense with IP 65 complete with all accessories and necessary fixing arrangement on wall at any height including twin core 0.5 sqmm copper conductor cable from connector to fitting and after taking down old unserviceable light fittings of any type complete all as specified and directed. (Note: Material required for safety harness, ladder and T&P etc will be provided by the contractor without any extra cost). (Make:- Crompton, Model No TRP-421-30-57-SL-LM-NBK or Havells, Cat No UNDOWNBRIGHTSL30WLED757PASYBOPC or equivalent in Philips)(Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings to the Engineer-In-Charge.(b) Warranty certificate shall be submitted for LED light fitting as per standered format for minimum 50000 Hrs to the Engineer-In-Charge.(c) LED light fitting and drivers shall be of same make.)(d) Material required for safety harness, ladder and T&P etc will be provided by the contractor without any extra cost. (e) Original purchas voucher & TC having GST No of LED light fitting complete with 1x 30 watts shall be submitted by the contractor to Engineer-in-Charge before taking any payment.) |
| 26 | S&F for LED Driver of existing 30/35/45/60/70 Watt LED Street light/ Security light/Perimeter light fitting as per existing make of LED fitting including Surge protection device (SPD) complete as in repair all as specified and directed. (Note : Original purchase voucher of the item shall be submitted by the contractor before taking any payment duly verified and defeced by the Engr-in-Charge ) |
| 27 | S&F for LED Driver of existing 90/100/120 Watt LED Street light/Security light/Perimeter light fittings as per existing make of LED fitting including Surge protection device (SPD) complete as in repair all as specified and directed. (Note : Original purchase voucher of the item shall be submitted by the contractor before taking any payment duly verified and defeced by the Engr-in-Charge ) |
| 28 | S&F for LED Driver of existing 150/200/500 Watt LED Flood light/ Security light/Perimeter light fittings as per existing make of LED fitting including Surge protection device (SPD) complete as in repair all as specified and directed. (Note : Original purchase voucher of the item shall be submitted by the contractor before taking any payment duly verified and defeced by the Engr-in-Charge ) |
| 29 | S&F for 400 watt LED flood light luminaire with secondary optics made in pressure die cast housing and heat sink in aluminium of IP-66 protection complete with all accessories duly prewired and including fixing arrangement at different hanger area upto height of 24 mtr by providing clamps, nuts, bolts, and washers etc after taking down old unserviceable flood light fitting of any type duly disconnecting the electric supply complete all as specified and directed. (Make:- Crompton, Model No CFS-512-400-57-30D-HL3-GL-NGG or Havells Cat No. JETAMONOSNEOFL400WHELED757WBTOTG or equivalent in Philips) (Note: (i) Contractor shall ensure all safety aspects of menpower who are working at site duly proper insurance of the individual (ii) All necessary tools and plants for fixing and taking down of lamp fittings light boom ladder with safety equipment etc shall be provided by the contractor(iii) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings to the Engineer-In-Charge.(iv) Warranty certificate shall be submitted for LED light fitting by the contractor and also company warranty certificate submitted as per standard format for minimum 50000 Hrs from the date of install the light fittings to the Engineer-In-Charge before payment.(v) LED light fitting and drivers shall be of same make.(vi) Material required for safety harness, ladder and T&P etc will be provided by the contractor without any extra cost. (vii) Original purchas voucher & TC having GST No of LED light fitting complete with 1x 400 watts shall be submitted by the contractor to Engineer-in-Charge before taking any payment.) |
| 30 | S&F for 500 watt LED flood light luminaire with secondary optics made in pressure die cast housing and heat sink in aluminium of IP-66 protection complete with all accessories duly prewired and including fixing arrangement at different high mast by providing clamps, nuts, bolts, and washers etc after taking down old unserviceable flood light fitting of any type duly disconnecting the electric supply complete all as specified and directed. (Make:- Crompton, Model No CFS-513-500-57-60D-SL-GL-NSG or Havells Cat No. JETAMONOSNEOFL500WHELED757WBTOTG or equivalent in Philips)(Note: (i) Contractor shall ensure all safety aspects of menpower who are working at site duly proper insurance of the individual (ii) All necessary tools and plants for fixing and taking down of lamp fittings light boom ladder with safety equipment etc shall be provided by the contractor(iii) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings to the Engineer-In-Charge.(iv) Warranty certificate shall be submitted for LED light fitting by the contractor and also company warranty certificate submitted as per standard format for minimum 50000 Hrs from the date of install the light fittings to the Engineer-In-Charge before payment.(v) LED light fitting and drivers shall be of same make.(vi) Material required for safety harness, ladder and T&P etc will be provided by the contractor without any extra cost. (vii) Original purchas voucher & TC having GST No of LED light fitting complete with 1x 500 watts shall be submitted by the contractor to Engineer-in-Charge before taking any payment.) |
| 31 | S&F for 200 watt LED circular high bay light luminaire with secondary optics made in pressure die cast housing and heat sink in aluminium of IP-66 protection complete with all accessories duly prewired and including fixing arrangement at different high mast by providing clamps, nuts, bolts, and washers etc after taking down old unserviceable flood light fitting of any type duly disconnecting the electric supply complete all as specified and directed. (Make:- Crompton, Model No CIP-326-200-57-60D-HL2-LM-NSG or Havells Cat No. SAUCERGENXADVHBP200WLED757NBBBORL or equivalent in Philips)(Note: (i) Contractor shall ensure all safety aspects of menpower who are working at site duly proper insurance of the individual (ii) All necessary tools and plants for fixing and taking down of lamp fittings light boom ladder with safety equipment etc shall be provided by the contractor(iii) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings to the Engineer-In-Charge.(iv) Warranty certificate shall be submitted for LED light fitting by the contractor and also company warranty certificate submitted as per standard format for minimum 50000 Hrs from the date of install the light fittings to the Engineer-In-Charge before payment.(v) LED light fitting and drivers shall be of same make.(vi) Material required for safety harness, ladder and T&P etc will be provided by the contractor without any extra cost. (vii) Original purchas voucher & TC having GST No of LED light fitting complete with 1x 400 watts shall be submitted by the contractor to Engineer-in-Charge before taking any payment.) |
| 32 | S&F for 1000 watt Sodium Lamp E40 High Pressure Sodium Lamp IP-66 protection complete with all accessories duly prewired and including fixing arrangement by providing clamps, nuts, bolts, and washers etc after taking down old unserviceable Sodium Lamp E40 High Pressure Sodium Lamp fitting of any type duly disconnecting the electric supply complete all as specified and directed. (Make:- Philips, Model No SON-T 1000W E E40 1SL/4 or equivalent of Havells/Crompton as approved by GE) Dimentions of Lamp Dia=66mm And Length=390mm. (Note: (i) Contractor shall ensure all safety aspects of menpower who are working at site duly proper insurance of the individual (ii) All necessary tools and plants for fixing and taking down of lamp from light fittings boom ladder with safety equipment etc shall be provided by the contractor(iii) Warranty certificate shall be submitted for LED light by the contractor and also company warranty certificate submitted as per standard format for minimum 50000 Hrs from the date of install the light to the Engineer-In-Charge before payment.(iv) Material required for safety harness, ladder and T&P etc will be provided by the contractor without any extra cost. (v) Original purchas voucher having GST No of Sodium Lamp complete with 1x 1000 watts shall be submitted by the contractor to Engineer-in-Charge before taking any payment.) |
| 33 | S&F for 1000W HPSV Electronic Ignitor for 1000 watts Sodium Lamp E40 High Pressure Sodium Lamp IP-66 protection complete with all accessories duly prewired and including fixing arrangement by providing clamps, nuts, bolts, and washers etc after taking down old unserviceable 1000W HPSV Electronic Ignitor fitting of any type duly disconnecting the electric supply complete all as specified and directed. (Make: Philips/ Havells /Crompton) (Note : Original purchase voucher of the item shall be submitted by the contractor before taking any payment duly verified and defeced by the Engr-in-Charge ) |
| 34 | S&F for Capacitor (72uF +/- 5% ) of 250 VAC for 1000 watts Sodium Lamp E40 High Pressure Sodium Lamp IP-66 protection complete with all accessories duly prewired and including fixing arrangement by providing clamps, nuts, bolts, and washers etc after taking down old unserviceable 72uF +/- 5% Capacitor fitting of any type duly disconnecting the electric supply complete all as specified and directed. (Make: Philips/ Havells /Crompton) (Note : Original purchase voucher of the item shall be submitted by the contractor before taking any payment duly verified and defeced by the Engr-in-Charge ) |
| 35 | S&F for SON 1000W TYPE C8 391X/00 BALLAST for 1000 watt Philips Sodium Lamp E40 High Pressure Sodium Lamp IP-66 protection complete with all accessories duly prewired and including fixing arrangement by providing clamps, nuts, bolts, and washers etc after taking down old unserviceable SON 1000W TYPE C8 391X/00 BALLAST fitting of any type duly disconnecting the electric supply complete all as specified and directed. (Make:- Philips, Model No SON-T 1000W E E40 1SL/4 or equivalent of Havells/Crompton as approved by GE ) Dimentions of Lamp Dia=66mm And Length=390mm (Note : Original purchase voucher of the item shall be submitted by the contractor before taking any payment duly verified and defeced by the Engr-in-Charge ) Please Enable Macros to View BoQ information |
| 36 | S&F for SON 1000W TYPE C8 391X/00 BALLAST for 1000 watt Philips Sodium Lamp E40 High Pressure Sodium Lamp IP-66 protection complete with all accessories duly prewired and including fixing arrangement by providing clamps, nuts, bolts, and washers etc after taking down old unserviceable SON 1000W TYPE C8 391X/00 BALLAST fitting of any type duly disconnecting the electric supply complete all as specified and directed. (Make:- Philips, Model No SON-T 1000W E E40 1SL/4 or equivalent of Havells/Crompton as approved by GE ) Dimentions of Lamp Dia=66mm And Length=390mm (Note : Original purchase voucher of the item shall be submitted by the contractor before taking any payment duly verified and defeced by the Engr-in-Charge ) Please Enable Macros to View BoQ information |
