Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 2 | M & L brick work with fly ash bricks, Straight or curved onplan exc 6m mean radius,built in 1:6 in cement mortar all as Specified and Directed |
| 3 | M & L for brick work with sub class \\"B\\" brick (old size) straight or curved on plan to any radius in half brick thick walls built in CM 1:4 to any radius complete all as specified and directed. |
| 4 | Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 5 | M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surface of wall and to be finished even and smooth with out using extra cement complete all as specified and directed |
| 6 | M&L for rendering 15mm thick in CM 1:6 on other than fair faces of brick work or concrete surface of wall and to be finished even and smooth with out using extra cement complete all as specified and directed |
| 7 | M&L for Preparation of Newly Plastered surfaces of Wall and applying Two coats of Oil Bound Distemper over a coat of primer all as specified and directed. |
| 8 | M&L for preparation of newly plastered surfaces of wall applying two coat of white wash over a coat of primer all as specified and directed. |
| 9 | M&L for preparation of old distempered surfaces of walls and applying one coat of oil bound distemper on walls all as specified and directed. |
| 10 | M&L for Preparation of old surfaces of Wall and applying One coat of Cement Base Paint on walls all as specified and directed by Engineer-in-Charge. |
| 11 | M&L for Complete Removal of existing treatment including preparation of old treated surface and applying Two coat of oil bound distemper over 3 mm thick wall care putty including preparation all as specified and directed. |
| 12 | M&L applying two coats of acrylic exterior weather proof emulsion paint over a coat of exterior primer on newly plastered wall surfaces/ old decorated wall surfaces, in case of old decorated wall surfaces includes complete removal of existing wall finish of any type with wire brush, brooming, dusting & finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc complete all as specified and directed. |
| 13 | M&L preparation of old decorated Steel painted surfaces of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 14 | M&L preparation of old decorated wooden painted surfaces of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 15 | M & L for two coats of distempering with 1st quality washable plastic acrylic distemper (ready mixed) having VOC content less than 50gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification after preparation of plastered surface including a coat of primer on prepared surfaces including, rubbing with sand paper and applying and including 2 mm putty and old painting removal all as directed by Engr-in-Charge. |
| 16 | M&L for preparation of old decorated wall panelling, railing and as per site requirement etc and applying one coats of wooden french polish with gloss finish all as specified and as directed by Engr-in-charge. |
| 17 | M&L for preparation of existing sunken floor treatment incl plaster and removal of all debris with the following specification and sequence complete all directed by Engr-In-Chrg (a) Cleaning internal surface areas of sunken thoroughly to remove all dirt & loose materials by various mechanical/manual means.(b) Providing and making fillets at the junction of the walls and the slabs using CM 1:4. (c) Laying protection plaster 15mm th. in CM 1:4 on floor and wall with integral water proofing compound (d) Applying two coats of Epoxy resin polymer modified cementitious coating like brushbond of FOSROC/ Dr. Fixit Fastflex/ Bostic Powermix both on floor and wall of sunken. |
| 18 | M&L for Making corner fillets, Grating, Nahani trap, Gully trap with Polymer modified cementitious (PMC) mortar (PMC:C:M :: 1:2:4 by weight) at all joints of horizontal and vertical surface and doing bore packing with PMC mortar complete. And M&L for application of one coat of Acrylic Polymer Modified Cementitious (APMC) slurry (APMC:C :: 1:2 by weight) coating over the RCC slab surface and carried upto finished floor level on vertical portion (walls) complete and also including new any dia, size, PVC Pipe, grating, NT, GT, ETC as site requirement all as specified and directed all as directed by Engr-in-Charge. |
| 19 | Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed. |
| 20 | M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base flooring 100 mm thick complete all as specified and directed. |
| 21 | M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring 25 mm thick surface finished even and rough to receive the topping layer complete all as specified and directed. |
| 22 | M&L for Machine cut kota stone slab flooring mirror finished 18-20 mm thick (each slab not less than 0.25 Sqm) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab with 15 mm thick screed bed or bedding layer in cement mortar 1:6, including rubbing and polishing complete all as specified and directed. |
| 23 | M&L for Machine cut kota stone in riser of steps, skirting, dado and pillar mirror finished 18-20 mm thick over cement base rendering laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab with 10 mm thick screed bed or bedding layer in cement mortar 1:4, including rubbing and polishing complete all as specified and directed. |
| 24 | M& L Grinding and polishing mirror-ploished laidover with coloured wax for kota stone flooring complete all as specified and directed by Engr-in-Charge. |
| 25 | M/L Vitrified Ceramic tiles 10 mm thick (square/ rectagular) dark/light colour shade polished,area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floors over 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 26 | M&L Vitrified Ceramic tiles 10 mm thick on vertical surface of wall of size not exceeding 0.36 sqm,as in dado/skitting including 10 mm thick rendering in CM 1:4 complete all as specified and directed |
| 27 | M&L for Non skid ceramic coloured tiles of design as approved by GE 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed. |
| 28 | M&L for Non skid ceramic coloured tiles vertical surfaces area of each tile exceeding 0.06 sq m but not exceeding 0.11 sqm as skirting non skid ceramic tiles ncluding 10 mm thick rendering in CM 1:4 complete all as specified and directed. |
| 29 | M&L for Non skid ceramic coloured tiles of design as approved by GE 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed. |
| 30 | M&L for Non skid ceramic coloured tiles vertical surfaces area of each tile exceeding 0.11 sq m but not exceeding 0.16 sqm as skirting non skid ceramic tiles ncluding 10 mm thick rendering in CM 1:4 complete all as specified and directed. |
| 31 | M&L for 10 mm thick Double Charged Light shade vitrified ceramic tiles in floors, tiles size 600 mm x 1200 mm set & jointed in neat cement slurry and pointed in coloured cement to match as in floors over 20mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 32 | M&L for 10 mm thick Double Charged Light shade vitrified ceramic tiles on vertical surface of wall of size 600mm x 1200mm as in dado/skitting including 10 mm thick rendering in CM 1:4 complete all as specified and directed |
| 33 | M&L for anti non skid ceramic coloured tiles matt finish of design as approved by GE 10 mm thick (square) area of each tile size 600mm x 600 mm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 20 mm thick screed bed in cement mortor 1:6 complete all as specified and directed. |
| 34 | M&L for glazed ceramic coloured tiles size 600mm x 450mm x 10 mm thick on vertical surface such as dado /skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including rendering 10 mm thick in cement mortor 1:4 complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment. |
| 35 | M&L for glazed ceramic coloured tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm thick coloured on vertical surface such as dado /skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including rendering 10 mm thick in cement mortor 1:4 complete all as specified and directed. |
| 36 | M&L for 20 mm thick granite (of any type & colour) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms/shelves incl screed bed 15 mm th. in CM (1:6) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 37 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations |
| 38 | Taking up & down GI steel tubing & connections including cleaning for refixing or removal to store for 15mm bore of pipe complete all as specified and directed. |
| 39 | Taking up & down GI steel tubing & connections including cleaning for refixing or removal to store 20mm bore of pipe complete all as specified and directed. |
| 40 | Taking up & down GI steel tubing & connections including cleaning for refixing or removal to store 25mm bore of pipe complete all as specified and directed. |
| 41 | Refixing old steel tubing and connections in new or old position (wall, floor, ceiling etc) of 15 mm bore of pipe complete all as specified and directed. |
| 42 | Refixing old steel tubing and connections in new or old position (wall, floor, ceiling etc) of 20 mm bore of pipe complete all as specified and directed. |
| 43 | Refixing old steel tubing and connections in new or old position (wall, floor, ceiling etc) of 25 mm bore of pipe complete all as specified and directed. |
| 44 | Supplying and laying of 20mm bore dia, CPVC pipes SDR 11 & plain and brass CPVC SDR 11 fittings incl all brass reducers,unions,Tee fixed on walls/ceiling or laid in floors, etc, complete all as specified and directed. |
| 45 | Supplying and laying of 25mm bore dia, CPVC pipes SDR 11 & plain and brass CPVC SDR 11 fittings, incl all brass reducers,unions,Tee fixed on walls/ceiling or laid in floors, etc, complete all as specified and directed. |
| 46 | Dismantling PVC water tanks exc 250 ltr but not exc 500 ltr capacity and removing to store |
| 47 | Dismantling PVC water tanks exc 500 ltr but not exc 1000 ltr capacity and removing to store |
| 48 | S&F 500 ltr capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I |
| 49 | S&F 1000 ltr capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I |
| 50 | Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete. |
| 51 | Taking down bib tap/wash basin pillar tap/ stop cock/mixture tap and refixing the same after repair/replacement of spindles for 15 mm bore size complete all as specified and directed. |
| 52 | S&F in repair bib tap cast copper alloy chromium plated with crutch or butterfly handle fixed to 15 mm dia GI tube/CPVC pipe all as specified and directed. Make : Shakti, Parryware, hindware or equivalent. |
| 53 | S&F in repair bib tap cast copper alloy chromium plated with crutch or butterfly handle fixed to 15 mm dia GI tube/CPVC pipe all as specified and directed. Make : Jquar, Kohler, cera or equivalent. |
| 54 | S&F in repair bib tap 2 in 1 type cast copper alloy chromium plated with crutch or butterfly handle fixed to 15 mm dia GI tube/CPVC pipe all as specified and directed. Make : Shakti, Parryware, hindware or equivalent. |
| 55 | S&F in repair bib tap 2 in 1 type cast copper alloy chromium plated with crutch or butterfly handle fixed to 15 mm dia GI tube/CPVC pipe all as specified and directed. Make : Jquar, Kohler, cera or equivalent. |
| 56 | S&F in repair 15 mm fancy type pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered ‘Hot’ or ‘cold’ with long screwed shanks and fly nuts . |
| 57 | S&F in repair 15 mm fancy type pillar taps chromium plated cast copper alloy of long swan neck type & quarter turn type with or without lettered ‘Hot’ or ‘cold’ with long screwed shanks and fly nuts . |
| 58 | S & F in repairs CP brass center hole mixer for wash basin for mixing hot and cold water screwed down for iron pipe and fixed for 15 mm bore pipe size complete all as specified and directed Make : Jquar, Kohler, cera or equivalent. |
| 59 | S & F in repairs brass CP wall mixer for mixing hot & cold water with provision for over head shower with arm and long bend pipe and wall flanged screwed down for iron pipe of 15 mm bore size complete all as specified and directed. Make : Jquar, Kohler, cera or equivalent. |
| 60 | S & F in repairs brass CP kitchen sink mixer for mixing hot & cold water with provision screwed down for iron pipe of 15 mm bore size complete all as specified and directed. Make : Jquar, Kohler, cera or equivalent. |
| 61 | S&F in repair chromium plated wall mixer 3-in-1 system telephonic, connecting legs and wall flange complete all as specified and directed. Make : Jquar, Kohler, cera or equivalent. |
| 62 | S&F in repair 15 mm fancy type stop valve/angle valve cast copper alloy chromium plated screwed high pressure with crutch or butter fly handle screwed both ends for iron or union and fixed to 15 mm GI tube complete all as specified and directed by Engineer-in-Charge. Make : Shakti, Parryware, hindware or equivalent. |
| 63 | S&F in repair 15 mm fancy type stop valve/angle valve cast copper alloy chromium plated screwed high pressure with crutch or butter fly handle screwed both ends for iron or union and fixed to 15 mm GI tube complete all as specified and directed by Engineer-in-Charge.Make Jquar, Kohler, cera or equivalent. |
| 64 | S & F in repairs stinless steel tie hangers, fixed to wall and including all accessories and complete all as specified and directed by Engr-in-Charge. |
| 65 | S & F in repairs glass brush stand size 150mm x150mm, fixed with wall and including all accessories and complete all as specified and directed by Engr-in-Charge.Make : Jquar, Kohler, cera or equivalent. |
| 66 | S & F in repairs stainless steel towel rack dual foldable any shape and any size as required for ground/bath as directed by Engr-in-Charge to fixed with and including all accessories.Make : Jquar, Kohler, cera or equivalent. |
| 67 | S & F PVC bath cabinet with looking mirror overall size 450 x 650 mm all as specified and as approved fixed to wall complete. |
| 68 | S&F in repair 20mm dia ball Brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipes or brass ferrule and fixed as in PVC Service tanks all as directed. |
| 69 | S&F in repair 25mm dia ball Brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipes or brass ferrule and fixed as in PVC Service tanks all as directed. |
| 70 | S & F in repairs 20mm bore gun metal gate valves with iron wheel head screwed both ends for iron pipe and fixed. |
| 71 | S & F in repairs 25mm bore gun metal gate valves with iron wheel head screwed both ends for iron pipe and fixed. |
| 72 | S&F in repairs PVC connection 15mm size with PTMT nuts, of 450mm length complete all as specified and directed. |
| 73 | S & F in repairs, vitreous china wash basin, white, flat back, size 550x400mm with brackets, inc.cutting for fixing & pinning in ends of brackets complete all as directed by Engr-in-Chrg |
| 74 | S&F vitreous pedestal china for WHB as per suilable for WHB size as per site requirement complete all as specified and directed. |
| 75 | S & F in repairs, vitreous china wash basin oval type, white, for fixing in shelves standard size inc.cutting for fixing & pinning in ends of brackets complete all as directed by Engr-in-Chrg |
| 76 | S&F WHB table top or under counter-type any shape and any size including coupling complete all as specified and directed by Engr-in-Charge. |
| 77 | S&F in repairs viterious china squatting pan orissa pattern size 580x440mm white integal foot rest including concrete bedding & including P or S trap 100mm complete all as directed by Engr-in-Charge. |
| 78 | S & F in repairs, vitreous china wash down water closet pan (pedestal pattern), white, incl 'P' or 'S' trap and plastic water closet seat, black, closed pattern with flat bottom and cover & MS chromium plated or aluminised hinging device, complete all as directed by Engr-in-Charge. |
| 79 | S & F in repair Europian WC floor mounted cascade pattern vitreous china with dual core flushing cistern incl all fitting flush pipe etc complete all as specified and directed. Make-Jaquar cat FSS-WHT-29853S300UFSM or equivalent. |
| 80 | S & F in repair Vitreous china rimless wall hung pedestal pattern water closet incl seat cover, rack bolts hinges incl all accessories incl slim type flushing cistern wall hung 08 to 10 Ltr Capacity compatible with 39mm drainage pipe complete all as directed |
| 81 | S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed. |
| 82 | S&F Bottle trap chromium plated for WHB/urinal etc as per approved quality all as per specified and directed |
| 83 | S&F Vitreous China urinals, full stall type urinal, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement including waste pipe complete all as specified and directed. |
| 84 | S & F in repairs Vitreous China urinals, bowl type flat back size of 465 x 355 x 265 mm white (minimum) with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement etc complete all as sapecified and directed. |
| 85 | S&F in repair PVC low level flushing cistern (white) 10 Ltrs capacity with inlet, ball valve, float and handle internal fitting, push button operated type with and including brackets etc complete. |
| 86 | S/F in repair CP health faucet with flex pipe and hand shover ,the length of hose 1.50 mtr fitted to the tap.complete all as specified. Make : Shakti, Parryware, hindware or equivalent. |
| 87 | S/F in repair CP health faucet with flex pipe and hand shover ,the length of hose 1.50 mtr fitted to the tap.complete all as specified. Make Jquar, Kohler, cera or equivalent. |
| 88 | S&F in repairs EWC seat cover of any pattern including cover and Mild steel chromium plated hinging devices of any colour all as specified and directed. Make : Shakti, Parryware, hindware or equivalent. |
| 89 | S&F in repairs EWC seat cover of any pattern including cover and Mild steel chromium plated hinging devices of any colour all as specified and directed. Make Jquar, Kohler, cera or equivalent. |
| 90 | S&F Iin repair CP Grating doom 75 mm dia with PVC (SWR) nahani/floor trap incl jointing with solvent cement complete all as specified and directed. |
| 91 | S&F in repair CP brass towel rail `D’ type 60Cm long fixed to wall all as spd and directed by Engr-in-Charge. Make : Shakti, Parryware, hindware or equivalent. |
| 92 | S&F in repair CP brass towel rail `D’ type 60Cm long fixed to wall all as spd and directed by Engr-in-Charge. Make Jquar, Kohler, cera or equivalent. |
| 93 | S&F Chromium plated Towel Ring fixed with and including Chromium plated brass screws and wooden/plastic cleats(Minimum weight 90 gms). Make : Shakti, Parryware, hindware or equivalent. |
| 94 | S&F Chromium plated Towel Ring fixed with and including Chromium plated brass screws and wooden/plastic cleats(Minimum weight 90 gms). Make Jquar, Kohler, cera or equivalent. |
| 95 | S&F in repair soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and directed. Make : Shakti, Parryware, hindware or equivalent. |
| 96 | S&F in repair soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and directed. Make Jquar, Kohler, cera or equivalent. |
| 97 | S&F Looking mirror 5.5 mm thick of selected quality glass of size 600 x 450 mm bevelled edge ,mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plug with chromium plated brass screw and cup washers including aluminium anodized frame complete all as specified and directed. |
| 98 | S & F in repair bevelled edge Looking mirror of any size without frame of selected quality glass mounted on wall with chromium plated stainless screws complete all as specified and directed |
| 99 | S&F in repair brass shower rose 125 mm dia any type fixed to plugs with chromium plated brass screws complete all as specified and directed |
| 100 | S&F in repair stainless steel overhead shower rose square type 150/200 mm with CP arms 400/350 mm long as per ground requriment etc complete all as specified and directed by Engr-in-Charge. Make Jquar, cera or equivalent. |
| 101 | S&F as in repair glass shelf assembly consisting of 5.5mm thick sheet 12cm wide with chromium plated bracket guard railing 60cm long complete all as specified and directed |
| 102 | S&F as in repair glass shelf assembly consisting of 5.5mm thick sheet 12cm wide with chromium plated bracket guard railing 60cm long complete all as specified and directed. Make Jquar, cera or equivalent. |
| 103 | S&F as in repair cornner glass shelf of size 9\\"*9\\" shelf and frond,circle in design fixed over chromium plated brackets of heavy duty with frond linings with glass fixed in wall with necessary screws complete all as specified and directed. |
| 104 | S&F as in repair cornner glass shelf of size 9\\"*9\\" shelf and frond,circle in design fixed over chromium plated brackets of heavy duty with frond linings with glass fixed in wall with necessary screws complete all as specified and directed. Make Jquar, cera or equivalent. |
| 105 | S & F in repair Toilet paper holder, S S box type complete all as specified and directed |
| 106 | S & F in repair LId of water tank capacity of 500/1000/2000 Ltrs including necessary cleats/clamps complete all as specified and directed. |
| 107 | M&L for cleaning of water storage tank of capacity upto 500 ltrs mountred on roof incl removal of all vegetation if any, loose dirt and all other materials with help of tank cleaning motor jet pressure machine and pouring bleaching powder @0.25 kg per tank with date of cleaning clearly written over tank incl Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in positional and also including white enamel paint for writing letters 20 cm high TANK CLEANED AS ON DATE all specified and directed by Engr-in-Chrge. |
| 108 | M&L for cleaning of water storage tank of capacity exc 500 ltr but not exc 1000 ltrs ,size,type etc.mountred on roof incl removal of all vegetation if any, loose dirt and all other materials with help of tank cleaning motor jet pressure machine and pouring bleaching powder @0.25 kg per tank with date of cleaning clearly written over tank ncl Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in positional and also including white enamel paint for writing letters 20 cm high TANK CLEANED AS ON DATE all specified and directed by Engr-in-Chrge. |
| 109 | S & F in repair LDPE waste pipe for WHB, sink, urinal etc. pipes of pressure rating 6 kgf/sq. cm complete. |
| 110 | S & F in repair HDPE waste pipe 32 mm dia for EWC,Flushing cistern etc. pipes of pressure rating 6 kgf/sq. cm complete. |
| 111 | S & F in repair HDPE pipe 40 mm dia of pressure rating 6 kgf/sq. cm complete. |
| 112 | S & F in repair 32mm dia Bottle trap of PTMT having minimum water seal of 25 mm all as spd. |
| 113 | S & F in repair 32mm dia bore Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc.with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed as in repairs |
| 114 | Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete,PVC ) set in cement mortor for any size & type complete all as specified and directed. |
| 115 | M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls or in floors of 75 mm bore of pipe etc complete all as specified and directed. |
| 116 | M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls or in floors of 110 mm bore of pipe etc complete all as specified and directed. |
| 117 | S&F PVC (SWR) bends any radius of 75 mm bore with out access door complete all as specified and directed. |
| 118 | S&F PVC (SWR) bends any radius of 110 mm bore with out access door complete all as specified and directed. |
| 119 | S&F PVC (SWR) bends any radius of 75 mm bore with access door complete all as specified and directed. |
| 120 | S&F PVC (SWR) bends any radius of 110 mm bore with access door complete all as specified and directed. |
| 121 | S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and directed. |
| 122 | S&F PVC (SWR) vent cowl 100 mm bore complete all as specified and directed. |
| 123 | Taking down chowkhat or frames n exc 1.50 Sqm each with shutters (without taking off shutters from the frame) and removing to or from store complete all as specified and directed |
| 124 | Taking down chowkhat or frames exc 1.50 Sqm and n exc 4 Sqm each with shutters (without taking off shutters from the frame) and removing to or from store complete all as specified and directed |
| 125 | S & F for solid PVC door frame of size 50x47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplied and fixing in opening as specified and shown on drawing made on section 8 of SSR 2010 Part-II complete all as specified and directed |
| 126 | S & F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, S & F in the frame as per specifications and shown on drawing in section 8 of SSR-2010 Part-II complete all as specified and directed |
| 127 | S&F 100 mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised type B-21 complete all as specified and directed. |
| 128 | S&F 150 mm size extruded aluminium alloy handles fabricated type anodised of complete all as specified and directed. |
| 129 | S&F 150 mm long aluminium,anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 130 | S&F in repair 100 mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised type B-21 complete all as specified and directed. |
| 131 | S&F in repair 150 mm size extruded aluminium alloy handles fabricated type anodised of complete all as specified and directed. |
| 132 | S&F in repair 150 mm long aluminium,anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 133 | S&F in repair 300 mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 134 | S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4 mm fixed with stainless steel wire staples or with necessary beads complete all as specified and directed. |
| 135 | S&F in repair fancy type heavy duty easy-to-fit wall-to-bracket holder for for 20/25mm dia stainless steel curtain rod, as per site requuirement approved by Engr-in-Charge complete all as specified and directed |
| 136 | S&F in repair for 25mm dia Stainless Steel Curtain Rod with brackets on both ends incl T/D of any type old curtain rods and making good disturbed surfaces with cement mortar or putty complete all as specified and directed |
| 137 | S&F in repairs 18/19 mm thick high density PVC/ WPC solid fibre board with prelaminated PVC sheet as Kitchen cupboard and frame including taking down the old cupboard shutters and removing to store complete all as specified and directed. |
| 138 | M&L in repair 6 mm thick ACP sheet, fixed with screws to aluminium door frame work incl taking down old aluminium doors etc. complete all as specified and directed. |
| 139 | M&L in repair 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work incl taking down old cupboards etc. complete all as specified and directed. |
| 140 | S&F 6 mm thick teak wood liping 18/19 mm width prelaminated particle board fixed with screws complete all as specified and directed. |
| 141 | S & F in repair Continuous (piano) hinges, 40 mm width of mild steel, bright finish or electrogalvanisd complete all as specified and directed. |
| 142 | S&F in repaur Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed. |
| 143 | S&F 100 mm long Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws |
| 144 | S & F magnetic catcher catcher with nut and screw of mild steel bright finish all as specified and directed. |
| 145 | S & F 40 mm dia cupboard knobs fixed with nuts screw and washer of mild steel bright finish complete all as specified and directed. |
| 146 | Hacking out old broken glass (any thickness, size quality or description) form wooden frames or stone, concrete or brick surrounds glazed with oil putty or fixed with beads complete all as specified and directed. |
| 147 | S&F 3 mm thick sheet glass ordinary quality and gazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed. |
| 148 | S&F 3 mm thick figured glass pin headed type and gazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed. |
| 149 | S&F in repairs aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed. |
| 150 | S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, over all length of cover plate 140 mm with hard drawn steel spring fixed in door etc complete all as specified and directed. |
| 151 | S&F in repair 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed |
| 152 | S & F in repair stainless steel SC-Premium Dual Edge - 8 PIN cloth hanger bathroom wall door Hooks, complete all as specified and directed. |
| 153 | S&F in repairs door seal with aluminium beading and 50 mm wide rubber seal complete fixed to aluminium/ Wooden doors complete all as specified and directed. |
| 154 | Taking down shutter of any description not exceeding 1 sqm each leaf and refixing, in same opening after easing and adjusting building hard ware etc complete all as specified and directed |
| 155 | Taking down shutter of any description exceeding 1 sqm but not exiding 2 Sqmeach leaf and refixing, in same opening after easing and adjusting building hard ware etc complete all as specified and directed |
| 156 | S&F 2nd class hardwood Beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc., and removing old beads to Store |
| 157 | M&L Mild steel framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings,frame work of watertanks and similar work conforming to Fe -290 Gde E-165 complete all as specified and directed. |
| 158 | S&F in repairs Aluminium Mortice lock 2 lever, vertical type, size 100 mm with escutcheon plates and two keys complete all as specified and directed. |
| 159 | S&F in repairs Aluminium Mortice lock 4 lever, vertical type, size 100 mm with escutcheon plates and two keys complete all as specified and directed. |
| 160 | S&F in repair floor door stopper of brass body and tongue, anodised, over all length of cover plate 140 mm with hard drawn brass spring fixed in door etc complete all as specified and directed. |
| 161 | S&F in repair 250 mm long brass, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, brass extruded section and fixing bolts and sliding bolts of extruded section brass complete all as specified and directed |
| 162 | S&F in repair 100 mm long butt hinges brass with galvanised mild steel hinge pin anodised type B-21 complete all as specified and directed. |
| 163 | S&F in repair 150 mm size extruded brass handles fabricated type anodised of complete all as specified and directed. |
| 164 | S&F in repair 150 mm long Brass barrel tower bolts of extruded section complete all as specified and directed. |
| 165 | S&F in repair floor door stopper of stainless steel body and tongue, anodised, over all length of cover plate 140 mm with hard drawn stainless steel spring fixed in door etc complete all as specified and directed. |
| 166 | S&F in repair 250 mm long stainless steel, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, brass extruded section and fixing bolts and sliding bolts of extruded section stainless steel complete all as specified and directed |
| 167 | S&F in repair 100 mm long butt hinges stainless steel with galvanised mild steel hinge pin anodised type B-21 complete all as specified and directed. |
| 168 | S&F in repair 150 mm size extruded stainless steel handles fabricated type anodised of complete all as specified and directed. |
| 169 | S&F in repair 150 mm long stainless steel barrel tower bolts of extruded section complete all as specified and directed. |
| 170 | Dismantling of wall and ceiling boards (fibre,pulp,insulation,etc)or insulation boards/slabs/blankets,any thickness,including cover fillets. complete alll as specified and directed |
| 171 | S&F 12 mm thick plain Gypsum Board False Ceiling with GI frame including all necessary drilling cutting to fix electric items complete all as specified and directed with following:- (a) GI Grid channel 30x25x20 mm of 24 gauge fixed with rawl plug and screw 450 mm centre to centre alongwith perimeter walls. (b) GI channel made to shape 50x40x40 mm of 24 gauge placed @ 600 mm centre to centre from perimeter at wall except long wall (in one span). (c) GI intermediate runners of size 45x10x10 mm of 24 gauge fixed @ 1200 mm centre to centre leaving frame of one side walls (in other span). (d) GI sheet 25 mm wide and 20 mm gauge suspended fixed with steel fastner to roof ceiling and 1200 mm centre to centre including pluging of RCC Slab/GI based shed/truss/purleen. (e) 12 mm thick gypsum board filling joints with POP and finishing complete with two coat of plastic emulsion paint over one coat of primer on ceiling and including 2mm thickness putty. |
| 172 | M&L 4 mm thick non asbestos fibre cement board fixied to GI/Aluminium framework with screws fixed in ceilings of size 600 x 600mm board incl anodised aluminium snap grid frame work for false ceiling all as specified and directed by Engr-In-Charge |
| 173 | S&F solid PVC wall lining consisting of 5mm thick single side prelam PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame and including 5 mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and also including dismantling of wall panels and directed by Engr-in-Charge. |
| 174 | S&F 12mm thick Toughned glass as in hinged doors, partitions automatic doors, windows and similar work etc including cutting to shape, drilling holes required completed and also including SS handles requried dia, size and shape all as specified and directed as in Engr-in-Charage. |
| 175 | M&L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 176 | Supply and fixing factory made UPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), UPVC extruded glazing beads of appropriate dimension,including Pinhead Glass with thickness of 4mm required for fixing & louvers strips, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc.Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Note: For UPVC frame, sash and mullion extruded profiles minus 5% tolerance in imension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made and 4mm thick glazing with selected quality glass and including taking down aluminium/wooden/steel/uPVC ventilator (Note: The unit rate quoted by contractor include cost of glass and includes all other connected accessories). |
| 177 | Supply and fixing factory made uPVC white colour casement door with 3D hinges made of (big series) frame 67 x 64 mm & ash 67 x 110 mm both having wall thickness of 2.3+ or - 0.2 mm and sinle glazing bead/double glazing bead of appropriate dimension. (area of ddor up to 2.00 Sqm) comprising of uPVC multi-chambered frame, sash and million (where ever required) ex truded rofiles duly reinforced with 1.60+ or - mm thick galvanied mild steel section made from roll forming process of requied length (shape & size according to UPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, Zinc alloy white powder coated 3D higes and one handle on each side of panels along with zick plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, GI fasterners 100 x 8 size for fixing frame to finished wall and necessary stainless stell screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and draingage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete and including WPC/PVC board as required size and thickness and 4 mm thickness glass and including taking down aluminium/wooden/steel/uPVC door all as secified and directed by Engr-in-Charge. |
| 178 | Providing and fixing factory made uPVC white colour casement (Openable) window made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 4mm thick glazing with selected quality glass or tinted glass. (Note: The unit rate quoted by contractor includes cost of glass and includes all other connected accessories and including taking down aluminium/uPVC/wooden/steel windows/ventilator all as directed by Engr-in-Charge. |
| 179 | Supply and fixing factory made UPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. and provided with Clear glass of Saint Gobain / Modiguard make with thickness of 4mm and stainless steel wire cloth of 0.19mm nominal dia. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified.Note: For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made and 4mm thick glazing with selected quality glass (Note: The unit rate quoted by contractor include cost of glass and includes all other connected accessories and taking down aluminium/wooden/steel/uPVC windows) all as directed by Engr-in-Charge. |
| 180 | Supply and fixing factory made uPVC white colour/selected colour (Jali door) frame 67 x 64 mm & ash 67 x 110 mm both having wall thickness of 2.3+ or - 0.2 mm and sinle glazing bead/double glazing bead of appropriate dimension. (area of ddor up to 2.00 Sqm) comprising of uPVC multi-chambered frame, sash and million (where ever required) ex truded rofiles duly reinforced with 1.60+ or - mm thick galvanied mild steel section made from roll forming process of requied length (shape & size according to UPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, Zinc alloy white powder coated 3D higes and one handle on each side of panels along with zick plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, GI fasterners 100 x 8 size for fixing frame to finished wall and necessary stainless stell screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and draingage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete, including taking down all as secified and directed by Engr-in-Charge. |
| 181 | S&F in repair door closer hydraulically regulated designation No 2, universal type, suitable for door shutter of weight not more than 60 Kg of aluminium (extruded section body) complete all as specified and directed. |
| 182 | S&F 7 mm thick aluminium grills of god quality surrounded by aluminium 'C' channel with mesh size 75 X 75mm incl taking down old grills of any type complete all as specified and directed. |
| 183 | Excavation of trenches in any type of soil n.exc 1.5 M wide and n.exc 1.5 M in depth for taking out/laying of pipe lines and getting out forming bottom surfaces to required gradients complete all as specified and as directed. |
| 184 | Returning, filling in and including spreading, leveling, watering and well ramming in layers n.exc 25 cm thick complete all as specified and directed |
| 185 | Removing excavated surplus materials to a distance not exceeding 50 Mtrs and deposited where directed at a level not exceeding 1.5 Mtr. Above starting point complete all as specified and directed. |
| 186 | M& L for MS/CI/DI fittings up to 150mm bore such as collar, bends (any type radius, any angle, double end socketted or double flanged or spigot & socket, tail pieces (all socketed or all flanged with an equal & other end tapering bellmouth or flanged plates, connecting pieces straight (both end flanged or socketed of socket & flanged & spigot ends or bellmouth tailpieces ( one end flanged & other end spigot or socket or tapering as bell mouth or flanged ) caps blank flanges heavy duty suitable for mechanical joint/flanged joint with and incl taking down old fitting of any type and any size complete all as specified and directed. |
| 187 | Supply , laying, jointing & testing of 200 mm dia DI Type K-7 pipe with flange ends, with cement morter zinc coated out side as per IS 8329/2000 in standard length suitable for and including gasket and fastners, laid in trenches complete all as specified and directed by Engr in charge. Make: Jindal/TATA STEEL/Electro steel.(Excavation and earth work, DI specials will be measured and paid seperately) |
| 188 | Description all as per Srl item No 187 above but Bore of pipe 150 mm dia |
| 189 | Description all as per Srl item No 187 above but Bore of pipe 100 mm dia |
| 190 | Description all as per Srl item No 187 above but Bore of pipe 80 mm dia |
| 191 | M & L for mechanical type joint made of MS sheet of size 6/8 mm thick along with rubber gasket nuts bolts and washers suitable for 80 mm bore dia of CI/DI pipe. Including Taking up or down old u/s joint all as specified and directed. |
| 192 | All as per item No 191 above but 100 mm bore dia |
| 193 | All as per item No 191 above but 150 mm bore dia |
| 194 | All as per item No 191 above but 200 mm bore dia |
| 195 | S&F in replacement of sluice valve 200 mm bore class PN - 1.6 with flanged and iron wheel head ,shut and open directed cast on it and including jointing materials,rubber gasket suitable size nut bolts and washer etc complete all as specified and directed. Make :Upadhay/Zoloto/Kirloskar or equivalent |
| 196 | All as per Item No. 195 above but 150 mm bore. |
| 197 | All as per Item No. 195 above but 100 mm bore. |
| 198 | All as per Item No. 195 above but 80 mm bore. |
| 199 | Supply only Brass spindle suitable for 100 mm dia sluice valve all as specified and as directed by Engineer In Charge |
| 200 | Supply only Brass spindle suitable for 150 mm dia sluice valve all as specified and as directed by Engineer In Charge |
| 201 | Supply only Brass spindle suitable for 200 mm dia sluice valve all as specified and as directed by Engineer In Charge |
| 202 | S&F foot valve 150 mm dia CI/GI/DI with complete fittings including taking out old unsv complete all as specified and directed. |
| 203 | S&F foot valve 100 mm dia CI/GI/DI with complete fittings including taking out old unsv complete all as specified and directed. |
| 204 | S&F foot valve 80 mm dia CI/GI/DI with complete fittings including taking out old unsv complete all as specified and directed. |
| 205 | S&F in replacement of NON return valve 100 mm bore class PN - 1.6 with flanged including jointing materials,rubber gasket suitable size nut bolts and washer etc complete all as specified and directed. Make :VAG(Resiliant sealed) Zoloto/Kirloskar or equivalent |
| 206 | All as per Item No. 205 above but 80 mm bore. |
| 207 | S&F in replacement of Air release valve 150 mm bore class PN - 1.6 with flanged including jointing materials,rubber gasket suitable size nut bolts and washer etc complete all as specified an d directed. Make :VAG(Resiliant sealed) Zoloto/Kirloskar or equivalent |
| 208 | All as per Item No. 207 above but 100 mm bore. |
| 209 | All as per Item No. 207 above but 80 mm bore. |
| 210 | Taking down 0ld unserviseable Run lead joint and M&L for run lead joint of size 80 mm dia complete all as specified and directed |
| 211 | All as per Item No 210 above but 100 mm bore. |
| 212 | All as per Item No 210 above but 150 mm bore. |
| 213 | All as per Item No 210 above but 200 mm bore. |
| 214 | All as per Item No 210 above but 300 mm bore. |
| 215 | All as per Item No 210 above but 400 mm bore. |
| 216 | All as per Item No 210 above but 450 mm bore. |
| 217 | Supply and fix Stainless steel nut bolt 10 mm,12 mm,16 mm complate all as specified and as directed. |
| 218 | Supply and fix Gland Rope 8 mm,10 mm,12 mm complate all as specified and as directed. |
| 219 | Dismantling of old unserviceable and M & L for Construction of Brick masonry valve chamber of size 900x900x900mm (internal dimension) chamber depth to be reckoned from the top of PCC foundation to top of brick wall, including PCC1:4:8 type D2 in foundation PCC 1:2:4 type B1 in coping, brick work in cm 1:4, plaster 15 mm thick in CM 1:4 flush pointing externally as the work proceeds, MS Sheet cover 3.00 mm thick with handle and locking arranging and angle iron frame of size (25 x 25 x 5 mm) including painting with two coats of synthetic enameled paint over a coat of red oxide primer complete all as specified and directed |
| 220 | All as per Item No 219 above but for 600*600*600 mm Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
