Tender For special Repair To Open Drain In 339 (I) Sup Asc Pl At Timarpur And Other Sanction Work Under Ge (North) Delhi Cantt-10
Tender Value
42.27 Lakhs
Estimated cost
Bid Submission
10 Jul 2026
0 days left
EMD
85000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Open Drain In 339 (I) Sup Asc Pl At Timarpur And Other Sanction Work Under Ge (North) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | S&F Framed work such as grills, gratings, chowkhats of angle/channel section etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; gates, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete, all as specified and directed |
| 2 | M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth over one coat of red oxide, zinc chrome complete all as specified and directed . |
| 3 | Demolition of brick work built in cement mortar incl all quoins, arches, pillars etc complete all as specified and as directed. |
| 4 | M&L for brick work with sub class 'B' bricks old size bricks strainght or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed. |
| 5 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified. |
| 6 | M&L for Rendering 10mm thick (1:6) on fair faces of brick work or concrete surfaces mixed with water proofing for Internal Wall finished even and fair without using extra cement complete all as specified and directed. |
| 7 | M&L for Rendering 15mm thick (1:4) on fair faces of brick work or concrete surfaces External Wall finished even and fair without using extra cement complete all as specified and directed. |
| 8 | M&L for preparation of newly plastered surfaces and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces all as specified and directed. |
| 9 | Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for including cutting of reinforcement as required to facilliate demolition complete all as specified and directed. |
| 10 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for including cutting of reinforcement as required to facilliate demolition complete all as specified and directed. |
| 11 | M&L for reinforced cement concrete (nominal mix) type B 0 1:2:4 (12.50mm graded crushed stone aggregate) as in landings, cover slab, wall supported slabs and the like complete all as specified and directed. |
| 12 | M&L Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality all as specified and directed. |
| 13 | M&L Mild steel TMT bars 5 to 10mm,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality as in stirrups all as specified and directed. |
| 14 | Use & Waste of formwork to Chajjas, slab ,chullah hoods, troughs and similar items including edges rough finished surfaces complete all as specified and directed. |
| 15 | S&F Pre- painted galvalume aluminum zinc coating GI based steel sheet of approved profile of corrugation, 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and directed by Engr-in-Charge. |
| 16 | Dismantling structural steel/iron work including doors, gates, posts, purlins but excluding framed truss etc. all as specified and directed. |
| 17 | Surface excavation in soft/loose soil, not exceeding 30cm deep and averaging 15cm deep and getting out, complete all as specified and directed. |
| 18 | Excavating in post holes (or similar holes) each in soft/loose soil n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified. |
| 19 | M&L for cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete |
| 20 | M&L for plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate, as in surface channels and drains incl necessary formwork complete all as specified and directed. |
| 21 | M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed. |
| 22 | M&L for hard core of gauge n.exc.63mm hand broken bricks,spread and levelled in layer n exc.15cm thick watering and rammed to a true surface complete all as specified and directed. |
| 23 | M&L for broken brick bats of gauge n.exc.63mm hand broken bricks,spread and levelled in layer n exc.15cm thick watering and rammed to a true surface complete all as specified and directed. |
| 24 | M&L for 100 mm thick cement concrete type D-2 1:4:8 (40mm graded agg) as in sub floor; complete all as specified and directed. |
| 25 | M&L for 75 mm thick cement concrete type B-2 1:2:4 (40mm graded agg) as in sub floor; complete all as specified and directed. |
| 26 | M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade with Grey cement and pigment complete all as specified and directed. |
| 27 | M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade with Grey cement and pigment complete all as specified and directed. |
| 28 | M&L Sand filling under floors or in foundations including watering and consoilidation complete all as specified and directed. |
| 29 | M&L for cement concrete 1:2:4 type B-0, using 12.5mm graded stone aggregate as in coping, benching, kerbstone and similar work incl necessary form work to obtain a smooth finishes complete all as specified and as directed. |
| 30 | Returning, filling in, including spreading, levelling, watering and well ramming in layers n. exc 25 cm in hard dense soil. |
| 31 | Removing excavated material n. exc. 50m and depositing where directed at a level n. exc. 1.5m above the starting point. |
| 32 | M&L for providing WPC Jalli 24mm thick including fixing materials and frame work complete all as specified and directed. |
| 33 | S&F Mild steel, plain black sheet 0.80mm thick in wall cladding, steel gates & similar work, cut to size, holes punched; including round headed screws, clout nails or rivets & fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed. |
| 34 | M&L for factory made PCC kerb stone if size 600x325x150mm thick including fixing in cement morter 1:4 and packing with PCC 1:2:4 Type B1 using 20mm graded stone aggregate including two coats of synthetic enamel paint complete all as specified and directed by Engr-in-Charge |
| 35 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified. |
| 36 | M&L RCC 1:2:4 type B1 Foundations, including raits, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete uing type (using 20mm graded) stone aggregate complete all as specified. |
| 37 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified. |
| 38 | M&L RCC 1;2:4 type B1 in Columns, pillars, piers, posts and struts uing type (using 20mm graded) stone aggregate complete all as specified. |
| 39 | M&L Ready Mix Plaster 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) complete as specified. |
| 40 | M&L for applying two coats of cement base paint, white or tinted on new wall surface including preparation of surface complete as |
| 41 | S&F Rolled mild steel Framed work as in doors or gates of angle or Kgother section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering. running rails & guides) & hanging; also fastening & fixing complete GDE Fe410-0 or Fe 310-O complete as specified. |
| 42 | S&F Steel work in tubular trussles, purlins, rafters, tubler column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washers etc. complete using ERW or induction butt welded tubes confirming to Fe 410W grade E 250 quality B, etc complete all as specified and directed. |
| 43 | M&L for using mechinical means or manual method to clean the existing drain of any size or depth to clean such that free from any soil, dirt or building material including demolition of any existing foreign material , complete all as directed by Engr-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender