Tender For Repair And Maintenance Of Furniture Of Officers Md Accn At Ge Ima Dehradun., Dehradun-Uttarakhand

TDR : 56077392

Tender Notice
BOQ

18 Days Left

Dehradun , Uttarakhand

Tender Brief : Tender For Repair And Maintenance Of Furniture Of Officers Md Accn At Ge Ima Dehradun.

Document Fees
₹ 500 /-

EMD
₹ 50000.0 /-

Tender Value
₹ 25 Lakhs /-

Submission Date
10-07-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Bed hard steel (FD/E6/MA/P/08)
2	S & F following components of Bed hard steel including dismantling unservicable one all as specified and as directed. 12mm thick BWR phenol bonded commercial plywood on top of the bed. Make : Greenply/Archid Ply/Century Ply
3	Head Board 18mm thick prelaminated particle board including 04mm PVC beading one edge of head board.
4	Foot Board 18mm thick prelaminated particle board including 04mm PVC beading on edge of foot board.
5	Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coat of Black synthetic enamel paint including four Nos of hard rubber shoes (Make of paint- Asian/Berger/MRF/Shalimar)
6	S$F FMN Set duly welded for as directed by Engr-in-Charge
7	Repair/Replacement of following U/S parts of \\"Computer chair revolving/high back and med back\\" with suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge Drg( FD/E6/MAP/01)
8	S&F suitable new 12 mm thick hot pressed plywood complete to match the original seat as shown on drg.
9	S&F suitable new fabric & moulded polyurethane foam of 50mm thick with 32 density for seat.
10	S&F suitable new tapestry cloth/leatherite rexine (cloth/rexine shall not be less than 350/- per RM) alongwith PVC lipping all round the seat fixing as exesting
11	S&F suitable new 12 mm thick hot pressed plywood for back as shown on drg.
12	S&F suitable new fabric & moulded polyurethane foam of 50mm thick with 32 density for back.
13	S&F suitable new tapestry cloth/leatherite rexine (cloth/rexine shall not be less than 350/- per RM) alongwith PVC lipping all round the back.
14	S&F suitable new armrest made of black integral skin polyurethane & hardness with nuts & bolts.
15	S&F suitable hydraulic system with droplift mechanism of backrest adjusted as per existing shape & size.
16	S&F suitable MS bearing of existing shape & size of various type chair revolving steel.
17	S&F new wheeled 4/5 prong base of existing shape & size with nut & bolts to chair revolving steel of various types.
18	S&F suitable caster wheels of existing shape & size with nut & bolts.
19	M&L for Two or more coat painting of synthetic enamel paint on frame of Chair computer with high class finishing including necessary welding and smoothness of surface.
20	S&F in renewal of following u/s parts of \\"Chair dining MAP Officer\\" with suitable new parts (teak wood) of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge (FD/MAP-II/04)
21	S&F of new front legs.
22	S&F of new rear legs.
23	S&F of new stiffeners.
24	S&F in renewal of old torn u/s cloth of seat with new synthatic tapestry cloth of best quality not less than Rs. 450/mtr as approved by GE, along with new markin cloth of matching colours as per drg or as directed.
25	S&F in renewal of u/s plywood of seat with 6mm new comercial plywood.
26	S&F in renewal of u/s foam of seat with new foam of 75mm thick with 40 density and fixing it with seat as per drg or as directed.
27	S&F of new Buffers
28	Tightening of complete chair by suitable size Bambo Skewers & wood corner as directed by Engr-in-Charge on site.
29	M&L one or more coat walnut wooden/teak wood polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
30	S&F in renewal of following u/s parts of \\" Table bed side MAP\\" with suitable new parts of existing shape & size complete to match the original as shown on drg and all directed by Engr-In-Charge. (FD/E6/MAP/15)
31	S&F new top of existing size made of 18mm thick prelaminated MDF board with 4mm thick teak wood half round beading all round of table top.
32	S&F different new parts of small drawers : Top/Side/Bottom of existing shape and size made of 18mm thick prelaminated MDF board & 12 mm thick commercial ply wood with 4mm thick teak wood half round beading.
33	S&F different new parts of large drawers : Top/Side/Bottom of existing shape and size made of 18mm thick prelaminated MDF board & 12 mm thick commercial ply wood with 4mm thick teak wood half round beading.
34	S&F suitable size new back/base of table bed side, made out of 6 mm thick commercial ply wood duly screwed as shown on drg as directed.
35	S&F suitable size new sides of table bed side, made out of 18mm thick prelaminated MDF board duly screwed as shown on drg as directed.
36	S&F of new heavy duty mild steel ball bearing slides/telecscopic channel for smooth functioning of drawer as approved by GE.
37	S&F of new handle for drawer of table bed side MAP as approved by GE.
38	S&F of new hard rubber shoes (black) to legs of table bed side MAP as approved by GE.
39	S&F in renewal of old u/s front legs of table bed side with new front legs made out of 18mm MS square pipe (18 gauge) as shown on drg as directed.
40	S&F in renewal of old u/s rear legs of table bed side with new front legs made out of 18mm MS square pipe (18 gauge) as shown on drg as directed.
41	Tightening of complete table by suitable size nails & screw as directed by Engr-in-Charge on site.
42	M&L for two or more coats walnut/lacquer polish for all beading and view portion of table Bed Side match with MDF grains and synthetic enamel black paint on wooden/steel frame surface with high class finish including necessary rubbing, denting, welding and smoothness surfaces all as directed.Make of paint- Asian/Berger/Shalimar/MRF)
43	S&F in renewal of following U/S parts of \\"Table Dressing (Gents)\\" with suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge (FD/E6/MAP/16)
44	S&F suitable new 5mm thick looking mirror (Make- Saint Gobin/ Modi Guard) with back supported by 06mm plywood of existing shape & size with suitable nut & bolts.
45	S&F suitable new 12mm thick back ply of box .
46	S&F new top/base of table dressing made out of 18/19mm thick prelaminated MDF board ,one side teak finish and other side white.
47	S&F new side planks of table dressing made out of 18/19mm thick prelaminated MDF board ,one side teak finish and other side white.
48	S&F of new 05 mm thick plain glass self in table dressing as shown on drg.
49	S&F complete new beading of 4mm thick and fixed with headless nail.
50	Tightening of complete table by suitable size nails as directed by Engr-in-Charge on site.
51	M&L for two or more coats walnut/lacquere polish for all beading and view portion of table dressing match with grains
52	S&F in renewal of following U/S parts of \\"Table Dressing (ladies) with Stool \\" with suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. (FD/MAP-II/07)
53	S&F suitable new electro copper plated mirror of polished sheet glass of first class quality ISI marked size 1220x380x5mm thick as approved by GE.
54	S&F different new parts of drawers : Top/Side/Bottom of existing shape and size made of 18mm prelaminated MDF board & 12 mm thick ply wood with 4mm thick teak wood half round beading as per drg & directed.
55	S&F suitable new frame of first class hard wood (Teak) including 6mm thick ply wood for back side of mirror duly fixed with frame as per drg and as directed by Engr-in-Charge
56	S&F suitable new top of table dressing ladies (box) of prelaminated MDF board of 18/19mm thick with 4mm thick half round teak wood beading.
57	S&F suitable new side planks of table dressing (box) of prelaminated MDF board of 18mm thick with 4mm thick half round teak wood beading.
58	S&F suitable new door plank of table dressing (box) of prelaminated MDF board of 18mm thick with 4mm thick half round teak wood beading.
59	S&F suitable new bottom (box) of 12mm thick plywood as shown on drg.
60	S&F suitable new stainless steel piano hinges and one nos magnetic catcher as shown on drg.
61	S&F of new heavy duty mild steel telecscopic channel for smooth functioning of drawer as approved by GE.
62	S&F suitable new 50 mm long 'D' shaped stainless steel handle as approved by GE.
63	S&F suitable new 75 mm long 'D' shaped stainless steel handle as approved by GE.
64	S&F suitable new bottom of 06mm thick plywood for stool dressing (box) as shown on drg.
65	S&F suitable new 12mm th ply openable shutter for stool dressing (box) as shown on drg.
66	S&F new cushion foam of 75mm thick and 40 density for seat of stool dressing (box) as shown on drg.
67	S&F new leatherite cloth for seat of stool dressing (box) as shown on drg as approved by GE.
68	S&F suitable new heavy duty revolving nylon double wheels for stool dressing (box) as shown on drg.
69	S&F suitable new front plank for stool dressing (box) of prelaminated MDF board of 18/19mm thick with 4mm thick half round teak wood beading.
70	S&F suitable new back plank for stool dressing (box) of prelaminated MDF board of 18/19mm thick with 4mm thick half round teak wood beading.
71	S&F suitable new wooden battern (1\\" x 1\\")
72	S&F suitable size new side plank for stool dressing (box) of prelaminated MDF board of 18mm thick with 4mm thick half round teak wood beading.
73	Tightening of complete table dressing by suitable size nails and screw as directed by Engr-in-Charge on site.
74	M&L for two or more coats walnut/lacquere polish for all beading and view portion of table dressing match with grains
75	Repair and re canning of \\"Chair varandha\\" as per existing shape & size complete to match the original as per drg and all directed by Engr-In-Charge. FD-256
76	S & F in repair MS conduit 20mm bore,1.6mm thick, upto 30cm length, made to shape, duly welded components of Chair verandah all as specified and as directed.
77	Tuck welding to broken legs and frames of chair verandah
78	S&F of new PVC shoes 20mm dia at bottom of legs.
79	Preparation of steel tubular frame surfaces with emery paper and applying two coat of synthetic enamel paint of white colour of approved quality and recaning the chair fully both seat and back with new plastic cane, white, half round of size 4mm wide including providing new suitable PVC shoes of approved quality and colour. (Make of paint- Asian/Berger/Shalimar/MRF)
80	Re-canning of chair verandah both seat and back with 4/5mm wide and half round superior quality white plastic cane as approved by GE
81	Repair/Relacement of following U/S parts of \\"Chair Writing MAP/Chair Visitor\\" with suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge.FD/E6/MAP/12
82	S&F suitable new12 mm thick hot pressed plywood for seat.
83	S&F suitable new moulded polyurethane foam of 50mm thick with 32 density for seat.
84	S&F suitable new synthetic tapestry/leatheritte raxine cloth as approved by GE (Cloth shall not be less than 300/- per RM) alongwith PVC lipping all round the seat.
85	S&F suitable 12 mm thick hot pressed plywood for back.
86	S&F suitable fabric & moulded polyurethane foam cushion 50mm thick & 32 mm density for back
87	S&F suitable new synthetic tapestry/leatheritte raxine cloth as approved by GE (Cloth shall not be less than 300/- per RM) alongwith PVC lipping all round the back
88	S&F suitable new armrest made of black integral skin polyurethane & hardness with nuts & bolts.
89	S&F suitable new rubber stopper.
90	Two or more coat painting of synthetic enamel paint on frame of chair writing/chair visitor with high class finishing including necessary scrapping / welding and smoothness of surface. (Make of paint- Asian/Berger/Shalimar/MRF)
91	REPAIR TO TABLE CENTRE(FD-235, 274):
92	Removing of old U/S existing top from table and S&F new top of size as per drg. Top shall be 18 mm thick preliminated MDF board BWR exterior grade as approved by GE conforming to IS-12823 Grade-I type-II duly screwed. Edging all round the top shall be of 4mm teakwood.
93	Removing of old U/S leg and S&F new leg of seasoned shisham/teak wood as per drg including french polishing to repaired portion only to match the existing surfaces of the item.
94	Removing of old U/S Rails and S&F new Rails of seasoned shisham/teak wood as per drg match the existing surfaces of the item.
95	M&L one or more coat walnut wooden/teak wood polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
96	S&F Buffers
97	REPAIRS TO SIDE BOARD FD-371, 4241
98	Removing of unserviceable drawer and supply & fixing new drawer as per drawing as to match with exesting
99	Removing of unserviceable knobs/Handle and S&F new Handle/knobs as directed by Engr-in Charge
100	Removing of unserviceable top and S&F new top of 18/19 mm thick pre laminated MDF board exterior Gde I, type II confirming to IS-12823 as per drg.
101	Removing of old unserviceable plywood of back side and S&F of new 4mm thick commercial plywood ISI marked as per drg.
102	Removing of old unserviceable side supplied and fix new side pre limanited MDF board 18 mm thick as per drg and as directed by Engr-in Charge
103	Removing of old broken/unserviceable doors and S&F of new door made of 18 mm MDF board one side teak face & 4mm thick teak wood beading alround duly fitted with piano type hinges, all as directed by Engineer-in-Charge.
104	M&L one or more coat walnut wooden/teak wood polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
105	Table Dining 6 Person 1500x900(Drawing no.FD/MAP-II/03)
106	S&F following components of Table including dismantling unservicable one all as specified and as directed.Leg Shall be made of first class teak wood
107	Top made of 18mm thick pre-laminated MDF/Particle board one side teak face including provision of 4mm thick teakwood beading all around complete.
108	Short Rail shall be made of first class teak wood as directed
109	Long Rail shall be made of first class teak wood as directed
110	M&L one or more coat walnut wooden/teak wood polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
111	Buffers
112	Repair/Replacement of following U/S parts of \\"Stool Dressing\\" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge.FD 252, 282
113	S&F of new Legs
114	S&F of new Stiffeners
115	S&F of new Side rails (including holes for caning)
116	Buffers
117	Tightening of complete chair by suitable size nails & wood corner as directed by Engr-in-Charge on site.
118	M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
119	Canning of Seat of Stool dressing before final coat of lacqure polish
120	Almirah steel med 1/2 Hanging ,1/2 Shelves (FD 1034)
121	S & F Lock 7 lever with duplicate keys components of Almirah steel med including dismantling unservicable one all as specified and as directed(Make of Lock- Harrison/Lico/Godrej/Link)
122	S & F Handle 100 mm size chromium plated Heavy components of Almirah steel med including dismantling unservicable one all as specified and as directed.
123	S & F 3 way locking device with necessary fittings and painted with one coat of synthetic enamel paint of approved shade & quality over a coat of primer.
124	S & F leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of approved shade & quality over a coat of primer.
125	S & F door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with 7 lever lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of directed shade by Engr-in-Charge over a coat of primer inside and outside Two coat of spray painting of Hammertone paint (pattern of hammer tone shall be 0.06 gram silicon/kg) shall apply after preparation of surface all as specified and shown on drawing.Note for steel painting;- All steel surface shall be done with spray painting) Make of Lock- Harrison/Lico/Godrej/Link)
126	Preparation of old painted inner steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed.Note: Paint shall be make of Asian/Berger/MRF/Shalimar and shade of colour as per direction of Engr-in-Charge.
127	Preparation of old painted outer steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) of approved quality including dents/bends all as specified and as directed.Note Paint shall be make of Asian/Berger/MRF/Shalimar Vapcoure and shade of colour as per direction of Engr-in-Charge.
128	Rack shoe steel (FD/E6/Map/02 ®
129	S&F new wire mesh of 3 mm of duly wleded/fitted in tube frame of rack shoes steel
130	Change of tubler frame of exesting size and replace the exesting one
131	Rubber Shoes
132	Spray Painting two or more coats of synthetic enamel of black shade paint on old painted surface (Make of paint- Asian/Berger/MRF/Shalimar)
133	Repair/Relacement of following u/s parts of \\"Almirah large steel 1/2h x 1/2s\\" with suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge.FD-1033
134	S&F New lock of 6 lever with duplicate key of approved quality. (Make: Godrej/Harrison/Link/Lico/Godrej)
135	S & F shelves made of 1mm thick CRCA sheet welded/riveted and painted with one coat of synthetic emamel paint of directed shade by Engr-in-Charge over a coat of primer.
136	S & F Handle 110 mm size chromium plated Heavy components of Almirah steel med including dismantling unservicable one all as specified and as directed
137	S & F 3 way locking device including all mechanism with necessary fittings and painted with one coat of synthetic enamel paint of approved shade & quality over a coat of primer.
138	S & F leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of approved shade & quality over a coat of primer.
139	S & F door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 110mm size -01 No, 3 way locking device with 7 lever lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of directed shade by Engr-in-Charge over a coat of primer inside and outside Two coat of spray painting of Hammertone paint (pattern of hammer tone shall be 0.06 gram silicon/kg) shall apply after preparation of surface all as specified and shown on drawing.Note for steel painting;- All steel surface shall be done with spray painting) (Make: Godrej/Harrison/Link/Lico/Godrej)
140	S&F of suitable pattern MS clamps for holding of almirah shelves.
141	S&F new chromium plated 20 mm dia hanging rod of existing shape and size.
142	Preparation of old painted inner steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed.Note: Paint shall be(Make of paint- Asian/Berger/MRF/Shalimar) and shade of colour as per direction of Engr-in-Charge.
143	Preparation of old painted outer steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) of approved quality including dents/bends all as specified and as directed.Note Paint shall be (Make of paint- Asian/Berger/MRF/Shalimar) Vapcoure and shade of colour as per direction of Engr-in-Charge.
144	Repair/replacement of following u/s parts of \\"Computer table\\" with suitable new parts of existing shape & size complete to match the original as shown on drg and all directed by Engr-In-Charge (FD/E6/MAP/03 GE/PN/23)
145	S&F new top of 18mm thick prelaminated MDF board with 1mm thick PVC beading.
146	S&F new side plank of 18mm thick prelaminated MDF board as shown on drg.
147	S&F new mouse tray of 18mm thick prelaminated MDF board with both side sliding arrangement, including beading.
148	S&F new keypad tray of 18mm thick prelaminated MDF board including beading.
149	S&F of new heavy duty mild steel ball bearing slides/telecscopic channel for smooth functioning of key board drawer as approved by GE.
150	S&F new drawer of 18mm thick prelaminated MDF board with both side sliding arrangement including beading.
151	S&F of new bottom shelf of 18mm thick pre- laminated MDF board including beading .
152	S&F of new hard rubber shoes (black)
153	Tightening of complete table by suitable size nails & screw as directed by Engr-in-Charge on site.
154	M&L for two or more coats synthetic enamel black paint on steel frame surface with high class finish including necessary rubbing, denting, welding and smoothness surfaces all as directed by Engr- in -charge. (Make of paint- Asian/Berger/MRF/Shalimar)
155	Reapir of Teapoy Verandah MAP ( FD/E6/MAP/17)
156	Repair/repalcement of old u/s f legs Teapoy verandah adjoing with exesting rails and mesh with new front legs made out of 18mm MS square pipe (18 gauge) as shown on drg as directed.
157	Rubber shoes
158	Top made of 18mm thick pre-laminated MDF board one side teak face including provision of 4mm thick teakwood beading all around complete as dircetd by Engr-in Charge
159	Preparation of steel tubular frame surfaces with emery paper and applying two coat of synthetic enamel paint of approved shade & quality. (Make of paint- Asian/Berger/MRF/Shalimar)
160	Sofa Set 5 Seater(1+3+1) with cushioned.(Drawing no.FD/MAP-II/02)
161	M&L for removing the old worn/torn out cushion from sofa sets 5 seats and tapesty cloth from seat and back of sofa and providing new cushion of100 mm thick & 40 density cool foam of size 545 x 530x110mm thick including provision tapesty cloth of approved shade & quality Make : sleepwell/Feather foam
162	M&L for removing the old worn/torn out tapesty cloth cover from seat foam and back foam of sofa from sofa sets 4/5 seats and providing new tapestry cloth cover of approved shade & quality (cost of tapestry cloth shall be more than Rs. 350/- per metre) with zip on one side of cover for easy removing/closing purposes etc to cover the foam of size 545 x 530x110mm thick complete all as directed.
163	M&L for removing unserviceable/ broken Front Legs of Sofa Set 5 Seater(1+3+1) with cushioned.and S&F New Front Legs to match the original complete all as specified and directed.
164	M&L for removing unserviceable/ broken rear legs of Sofa Set 5 Seater(1+3+1) with cushioned. and S&F new rear leg to match the original complete all as specified and directed.
165	M&L for removing unserviceable seat plywood of Sofa Set 5 Seater(1+3+1) with cushioned. and S&F new plywood of 12 mm BWR to match the original complete all as specified and directed.
166	M&L for removing unserviceable back plywood of Sofa Set 5 Seater(1+3+1) with cushioned. and S&F back plywood of 12 mm BWR to match the original complete all as specified and directed.
167	M&L for removing unserviceable/ broken back rail for three seater of Sofa Set 5 Seater(1+3+1) with cushioned. and S&F new back rail to match the original complete all as specified and directed.
168	M&L for removing unserviceable/ broken front rail for three seater of sofa set 5 seater and S&F new front rail to match the original complete all as specified and directed.
169	M&L for removing unserviceable/ broken hand rest of Sofa Set 5 Seater(1+3+1) with cushioned. and S&F New hand rest to match the original complete all as specified and directed.
170	M&L one or more coat walnut wooden/teak wood polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
171	S&F Buffers
172	Repair/Relacement of following U/S parts of \\"Peg Table\\" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge.FD 277
173	S&F new top of 18/19mm prelaminated MDF board of exterior grade size 450x300mm with 4mm thick half round beading all round of table top as directed.
174	Long rails
175	Short rails
176	Stiffeners
177	Buffers
178	Tightening of complete table by suitable size nails made of bamboo & wood corner(whereever required) as directed by Engr-in-Charge on site.
179	M&L one or more coat walnut wooden/teak wood polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
180	Repair/Relacement of following U/S parts of \\"Teapoy\\" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. FD-232 /278/382
181	S&F new top of 18/19mm prelaminated MDF board of exterior grade size 600x400mm with 4mm thick half round beading all round of table top as directed.
182	Long rails
183	Short rails
184	Stiffeners
185	Buffers
186	Tightening of complete table by suitable size nails made of bamboo & wood corner(whereever required) as directed by Engr-in-Charge on site.
187	M&L one or more coat walnut wooden/teak polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
188	Repair/Relacement of following U/S parts of \\"Table Writing FD/Med\\" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge FD-33, 249, 275
189	S&F new top of 18/19mm prelaminated MDF board of exterior grade size 1145x600mm with 4mm thick half round beading all round of table top as directed.
190	Leg (35x35x760mm)
191	Long rails
192	Short rails
193	S&F of new sides of box made of 18/19mm thick MDF board as per drg and directed by Engr-In-Charge.
194	S&F of new door made of 18mm thick MDF board fixed with suitable piano type hinges alongwith 04mm thick teak wood beading & knob / handle as per drg and directed by Engr-In-Charge.
195	S&F of new self of 18/19mm thick MDF board as per drg and directed by Engr-In-Charge.
196	S&F of new central leg (150 to 200mm long) of teak wood as per directed by Engr-In-Charge.
197	S&F suitable new knobs / handle of approved quality.
198	Buffers
199	S&F different new parts of drawers : Top/Side/Bottom of existing shape and size made of 18mm prelaminated MDF board & 12 mm thick commercial ply wood with 4mm thick teak wood half round beading as per drg & directed.
200	S&F of new back ply of 6mm thick as per drg and as directed by Engr-In-Charge.
201	Tightening of complete table by suitable size nails made of bamboo & wood corner(whereever required) as directed by Engr-in-Charge on site.
202	M&L one or more coat walnut wooden/teak wood polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
203	Repair/Relacement of following U/S parts of \\"Hat Stand\\" with suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge FD-23, 233, 362
204	S&F 4mm thick teak face decorative plywood fixed with fevicol tipped with teak wood edging all round size 1330x710 mm as per drg and as directed by Engr-in-Charge.
205	S&F of Mirror of size 300x440x5.5mm thick as per drg.
206	S&F of Aluminium Peg set 120 mm with ISI mark.
207	M&L for two or more coat french polish with high class finishing.
208	Repair/Relacement of following U/S parts of \\" Sofa Set 4 Seater\\" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge.FD 258,281, 373
209	Front/Rear legs
210	Side rails
211	Front/rear side long rails
212	Arm/Handles
213	Wooden battens
214	Buffers
215	Tightening of complete sofa set by suitable size screw ,Bambo Skewers & wood corner wherever required as directed by Engr-in-Charge on site.
216	For 4 Seater M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
217	Polishing with French/lacqure polish (two coat) to under mentioned items of furniture article with high class finishing (after rubbing/scrapping/smoothness and filling) to complete side (inside and outside) as existing shape and size in drg as directed..
218	Chair dining Map
219	Table bed side Map
220	Table Dressing Ladies Map
221	Table Dressing Gents Map
222	Table Centre
223	Side Board
224	Table Dining 6 Person 1500x900
225	Sofa Set 5 Seater(1+3+1) with cushioned.
226	Peg Table
227	Teapoy
228	Table Writing FD
229	Hat Stand
230	Chest of drawer
231	Chair Writing FD
232	Chair easy FD
233	Repair/Replace of following U/S parts of \\"Table Bed Side\\" with suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. SK-572 FD-248 FD-276
234	S&F new side planks of size 230x510mm, made out of 18/19mm prelaminated MDF board of exterior grade ,one side teak finish and other side white with 4mm thick half round teak wood beading as per drg.
235	S&F new top of size 230x450mm, made out of 18/19mm prelaminated MDF board of exterior grade ,one side teak finish and other side white with 4mm thick half round teak wood beading as per drg.
236	S&F new 6mm thick back ply of size 510x450mm as per drg.
237	S&F different new parts of drawers : Top/Side/Bottom of existing shape and size made of 18mm prelaminated MDF board & 12 mm thick commercial ply wood with 4mm thick teak wood half round beading as per drg & directed.
238	S&F new shelf made out of 18/19mm prelaminated MDF board of exterior grade ,one side teak finish and other side white with 4mm thick half round teak wood beading as per drg.
239	S&F new knobs for drawers as approved by GE.
240	Buffers
241	Tightening of complete table bed side by suitable size nails as directed by Engr-in-Charge on site.
242	M&L for two or more coat french/lacqure polish with high class finishing as directed by Engr-in-Charge on site
243	Repair/Replacement of following U/S parts of \\"Chair Writing FD\\" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. FD -202,250, 280
244	S&F of new Front legs
245	S&F of new Rear legs
246	S&F of new Front/ back rails (including holes for caning)
247	S&F of new Side rails (including holes for caning)
248	S&F of new Arm/Handles
249	S&F of new Stiffeners
250	Rubber shoes
251	Tightening of complete chair by suitable size nails & wood corner as directed by Engr-in-Charge on site.
252	M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
253	Canning of Seat of Chair Writing before final coat of lacqure polish
254	Repairs to Bin Soiled linen small/large
255	Canning of Right & Left side of Bin Soiled LinenSmall/Large before final coat of lacqure polish
256	Removing of unserviceable top and S&F new top of 18/19 mm thick pre laminated MDF board exterior Gde I, type II confirming to IS-12823 as per drg.
257	Removing of old unserviceable plywood of back side and S&F of new 4mm thick commercial plywood ISI marked as per drg.
258	Removing of old unserviceable side supplied and fix new side pre limanited MDF board 18 mm thick as per drg and as directed by Engr-in Charge
259	M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
260	Repair/Replacement of following U/S parts of \\"Chair Easy FD\\" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. FD-229
261	S&F of new Front/Rear legs
262	S&F of new Side rails (including holes for caning)
263	S&F of new Front/Rear rails (including holes for caning)
264	S&F of new Arm/Handles
265	S&F of new Stiffeners
266	Buffers
267	Tightening of complete chair by suitable size nails/ Screw and bamboo Skewers & wood corner as directed by Engr-in-Charge on site.
268	M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
269	Canning of Seat of Chair Easy before final coat of lacqure polish
270	Canning of back of Chair Easy before final coat of lacqure polish
271	Repairs to Chest of drawer F-57
272	Removing of unserviceable drawer and supply & fixing new drawer as per drawing as to match with exesting
273	Removing of unserviceable knobs/Handle and S&F new Handle/knobs as directed by Engr-in Charge
274	Tightening of completeChest of drawer by suitable size nails/ Screw and bamboo Skewers & wood corner as directed by Engr-in-Charge on site.
275	M&L one or more coat walnut wooden polish of approved shade and quality and two coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
276	Repair/Relacement of following U/S parts of \\"Bed Hard with ply top\\" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge.FD-21, 246, 247, SK-
277	S&F 04 mm thick both side teak face ply all over the head rest of bed including teak wood beading.
278	S&F 04 mm thick both side teak face ply all over the foot rest of bed including teak wood beading .
279	Removing old unserviceable head board and supply & fixing new head board made out of Ist class hard wood (Sisham/teak) frame including 4 mm thick one side teak face ply ISI marked for both sides and complete teak wood beading shall be provided all around as per drg. Exposed to view wooden, ply surfaces shall be french polished with high class glossy finish. Note:- Playwood shall be make of Archid Ply/Green Ply/Century Ply
280	Removing old unserviceable foot board and supply and fixing new foot board made out of Ist class hard wood (Sisham/teak) frame including 4 mm thick one side teak face ply ISI marked for both sides and complete 4mm thick teak wood beading shall be all around provided as per drg. Exposed to view wooden, ply surfaces shall be french polished with high class glossy finish. Note Playwood shall be make of Archid Ply/Green Ply/Century Ply
281	S&F new long rail made out of teak wood size1800x90x35mm as per drg and directed by Engr in charge.
282	S&F new short rail/center stiffner made out of teak wood size 900x90x35mm as per drg .
283	S&F new clamps for holding of MNF set as per drg and directed by Engr in charge.
284	S&F new 12mm thick BWR phenol bonded commercial plywood of size 1800x900mm , fitted with suitable nut & bolt complete to match the existing shape and size.Playwood shall be (Make of Archid Ply/Green Ply/Century Ply)
285	Tightening of complete bed by suitable size nails & wood corner as directed by Engr-in-Charge on site.
286	M&L for two or more coat Lacquer polish with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge. Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents
5	Click here to download tender document	Tender Documents

Also Visit

Tenders

Uttarakhand Tenders

Furniture Tenders

Furniture Items Tenders

Furnitures Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Repair And Maintenance Of Furniture Of Officers Md Accn At Ge Ima Dehradun., Dehradun-Uttarakhand

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Repair And Maintenance Of Furniture Of Officers Md Accn At Ge Ima Dehradun., Dehradun-Uttarakhand

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us