|
| 1 | M&L for attending complaints pertaining to essential cleaning of RCC/Sail-glazed stoneware drain pipes sewage line upto 200mm dia through day to day maintenance by rodding/auger rods/drain pipe machine as required from manhole to manhole including gully trap with and including dewatering of contaminated waste effluent & getting out the sludge if required by using suitable method during cleaning process from any size of manholes & gully traps before & after cleaning process of RCC sewage line and well flushing using clean water through water bowser pipe of any capacity (arranged by the Contractor) and removing the sludge etc to a distance n.exc 250m and burying the same underground by digging pit of suitable size from habitant area and returning & filling with excavated materials upto ground level including removal of surplus soil to a distance n. exc 250m with and including taking off manholes/gully trap covers and re-fixing the same after cleaning process complete all as specified and directed. Note :- The measurement of Each Job will be covered the length between one manhole to another manhole including manholes. The rate quoted against this item shall includes all M&L for and T&P. |
| 2 | M&L for attending complaints pertaining to essential cleaning/taking off of sludge of any state (like solid/semi solid & other similar materials etc) through day to day maintenance from manhole of any size including gully trap having depth upto 4.00m by using machinary or manually as required and removing the same to a distance n.exc 250m and burying the same underground by digging pit of suatible size from habbatient area and returning & filling with excavated materials upto ground level including removal of surplus soil to a distance 250m with and includig taking off manholes/gully trap covers and re-fixing the same after cleaning process complete all as specified and directed.Note : The rate quoted against this item shall includes all M&L for and T&P. |
| 3 | M&L for attending complaints pertaining to essential opening/cleaning of blocked WC of any type, traps and CI/PVC drain pipe including fittings (i.e. access door bends/tee etc) of any size at any position through day to day maintenance with and including taking down of CI/CP/PVC grating and refixing the same at position with appropriate materials/fittings i.e. white cement, solvent, nuts & bolts etc and well flushing, pressure pumping, taking out all residue materials etc and removing the same to distance not exc 250 mtr, burried the same underground by digging pit of suatible size from habbatient area and covering same wrt the earth level including removal of surplus soil to a distance 250m, complete all as specified and directed. Note : The rate quoted against this item shall includes all M&L for and T&P. |
| 4 | Supply and fix in repair factory made SRFC precast RCC manhole cover with suitable size of frame fixed with manhole chamber top in CM 1:3 to receive manhole cover as required round/square/rectangular shape and thickness approx 100mm for heavy duty for manhole/drain cover, edge of manhole cover locked with pre-painted 1mm thick MS sheet complete all as specified and directed.(Note : Size of manhole will be provided to the contractor during execution of work by the Engr-in-Charge as per site requirement). |
| 5 | Supply and fix in repair factory made SRFC precast RCC manhole cover with suitable size of frame fixed with manhole chamber top in CM 1:3 to receive manhole cover as required round/square/rectangular shape and thickness approx 75mm for medium duty for manhole/drain cover, edge of manhole cover locked with pre-painted 1mm thick MS sheet complete all as specified and directed.(Note : Size of manhole will be provided to the contractor during execution of work by the Engr-in-Charge as per site requirement). |
| 6 | Supply and fix in repair factory made SRFC precast RCC manhole cover with suitable size of frame fixed with manhole chamber top in CM 1:3 to receive manhole cover as required round/square/rectangular shape and thickness approx 50mm for medium duty for manhole/drain cover, edge of manhole cover locked with pre-painted 1mm thick MS sheet complete all as specified and directed.(Note : Size of manhole will be provided to the contractor during execution of work by the Engr-in-Charge as per site requirement). |
| 7 | Re-fixing cast iron pipe 75mm bore with all fittings/connections & MS clamps/clips and necessary screwing as reqd in new or old position as fixed with walls with and including taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 8 | Re-fixing cast iron pipe 100mm bore with all fittings/connections & MS clamps/clips and necessary screwing as reqd in new or old position as fixed with walls with and including taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 9 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 10 | S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with necessary MS/PVC clamps and necessary screwing complete all as specified and directed. |
| 11 | S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with necessary MS/PVC clamps and necessary screwing complete all as specified and directed. |
| 12 | S&F 110 mm PVC (SWR) access door bends any radius complete all as specified and directed. |
| 13 | S&F 75 mm PVC (SWR) access door bends any radius complete all as specified and directed. |
| 14 | S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal provided with access door complete all as specified and directed. |
| 15 | S&F 110mm PVC PVC (SWR) vent cowl complete all as specified and directed. |
| 16 | Demolition of reinforced cement concrete of any descritption and in any position not otherwise speccifically provided for complete all as specified and directed. |
| 17 | M&L for precast RCC 1:2:4 Type-B1 (using 20mm graded crushed stone aggregate) as in manhole and drain cover slab and similar article with plain/semi perforated faces, top, side edge etc, set in cement 1:4 with and including necessary use and waste formwork complete all as specified and directed. |
| 18 | S&F TMT Mild Steel bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, less than 0.9mm dia or securing with clips. |
| 19 | Demolition of Brickwork or stone/boulder masonry/precast cement concrete block masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 20 | M&L for brick work with sub class 'B' bricks (old size) straight or curved in plan exc 6 mtr mean radius built in CM (1:6) using old size bricks complete all as specified and directed. |
| 21 | M&L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:5:8) grade D-5 and setting in CM 1:6 including demolition of brick or stone/boulders masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work and precast concrete articles complete all as specified and directed. |
| 22 | Taking down cement or lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 23 | M&L for rendering 15 mm thick in CM 1:3 with and including mixing of liquid WPC of approved make @ 200ml per bag of cement on brick/concrete/stone wall surfaces of any description, and finishing the surfaces even and fair complete all as specified and directed. |
| 24 | Material & Labour for preparing surfaces newly plastered or unplastered surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces complete all as specified and directed. |
| 25 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over old surfaces with and including complete removal of existing treatment of any layer of wall and prepariing complete all as specified and directed. |
| 26 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 27 | Dismantling stone slabs/tiles of any description or thickness laid bedded & pointed in cement mortar in floors, hard standing, Apron etc. complete all as specified and directed. |
| 28 | M&L for 75mm thick PCC Type D- 2, 1:4:8 (40mm graded aggregate) as in sub base of flooring complete all as specified and directed. |
| 29 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; ® complete all as specified and directed. |
| 30 | All as per srl item No.29 above above but except tiles complete all as specified and directed. |
| 31 | M&L for factory made chamfered edge cement concrete chequered tiles of size 300 x 300mm x 20mm thick conforming to IS-1237 (2006) with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over including screed bed 15mm thick in CM (1:6) complete all as specified and directed. |
| 32 | All as per srl item No.31 above but except tiles complete all as specified and directed. |
| 33 | M&L for factory made kerb stone of M-25 grade cement concrete, laying at or near ground level in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (Thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete all as specified and directed. |
| 34 | Excavation in trenches, n exec 1.5m wide and n exc 1.5m in depth for foundation in soft & loose/hard & dense soil/mud including PCC hardstanding/any type of flooring work inclding road cutting etc complete all as specified and directed. |
| 35 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm by using excavated materials from site complete all as specified and directed. |
| 36 | Removing excavated material exc. 1.50km but n exc. 5.00km and depositing where directed at a level n. exc 1.5m above the starting point complete all as specified and directed. |
| 37 | M&L for plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregates as in foundation, filling in mass concrete for manholes & drains complete all as specified and directed.. |
| 38 | M&L for plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregates as in foundation, filling in mass concrete for manholes & drains complete all as specified and directed. |
| 39 | M&L for plain cement concrete 1:2:4 Type B1 using 20 mm graded aggregate as in benching and surface channel/drain etc complete all as specified and directed. |
| 40 | M&L for plain cement concrete 1:3:6, type C-1 using 20mm graded stone aggregate as in coping with including use waste of form work etc complete all as specified and directed. |
| 41 | Extra forming fair finished drain or channel 30cm/45cm/60cm inner girth in cement concrete using extra cement including, forms mould, mitred/stopped ends etc complete all as specified and directed. |
| 42 | Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar of 300mm bore dia complete all as specified and directed. |
| 43 | Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar of 200mm bore dia complete all as specified and directed. |
| 44 | M&L for 300mm bore dia reinforced concrete drain pipes class NP-3 confirming to IS laid in trenches and jointed in CM 1:2 with collars all as specified and as directed . |
| 45 | M&L for 200mm bore dia reinforced concrete drain pipes class NP-3 confirming to IS laid in trenches and jointed in CM 1:2 with collars all as specified and as directed . |
| 46 | M&L for cement concrete 1:4:8, type D-2 for bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 300mm bore dia pipe complete all as specified and directed. |
| 47 | M&L for cement concrete 1:4:8, type D-2 for bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 200mm bore dia pipe complete all as specified and directed. |
| 48 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 49 | Dismantling posts or struts (Wood, Steel or RCC) of any section embedded in concrete, brick work etc. including taking out embedded portion and making good disturbed ground complete all as specified and directed. |
| 50 | Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out from soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25cm, watering, and removing surplus soil to a distance not exc 50 m and making good surface complete all as specified and directed. |
| 51 | M&L for plain cement concrete 1:2:4, type B-2 (using 40mm graded crushed stone aggregetes) as in foundations, filling and mass concrete, complete all as specified and directed. |
| 52 | S&F mild steel work in Posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed. |
| 53 | Dismantling of fencing wire mesh any type complete all as specified and directed. |
| 54 | Supply only Chain link MS galvanised fencing of any size or any type complete all as specified and directed. |
| 55 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc. including provision of binding wire complete all as specified and directed. |
| 56 | S&F in repairs galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc complete all as specified and directed. (Note : Each line of wire to be measured.) |
| 57 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long and Diameter of neck in 5 to10mm complete all as specified and directed. |
| 58 | S&F Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con-forming to Fe 290.Gde-E-165 complete all as specified and directed. |
| 59 | S&F framed work as in doors or gates of tube section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Door etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guide) and hanging, also fastening and decorative cast iron artical etc complete all as specified and directed. |
| 60 | S&F in repairs 5mm thick best quality hollow polycarbonate sheets or any other type as used in roofing/view cutter (plain or corrugated etc) fixed with coach screw and washer/self tapping screws etc complete all as specified and directed. |
| 61 | M&L for preparation of new or previously untreated steel surfaces of any description not otherwise described over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide or zink chrome primer complete all as specified and directed. |
| 62 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete all as specified and directed. |
| 63 | Providing edge moulding to 18-20mm thick granite stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and directed. |
| 64 | M&L for preparation and applyig two coats painting on old/new brick, stone, concrete, asbestos cement or plaster surfaces over a coat of primer complete all as specified and directed. |
| 65 | Cleaning of choked storm water drains of any bore of pipe by roding or mechanical means and well flushing with water taking out waste materials any quantity and depositing where as directed including covering the same with at least 30cm thick layer of soil complete all as specified and directed. |
| 66 | Taking up or down drain cover slabs of any description for cleaning of storm water drains width not exc 45cm and depth not exc 60cm by roding or mechanical means and well flushing with water taking out waste materials any quantity and depositing where as directed including covering the same with at least 30cm thick layer of soil and refixing the cover slabs in same position with cement mortor complete all as specified and directed. Please Enable Macros to View BoQ information |
