|
| 1 | Taking down unserviceable rolling shutters/sliding gates for repairang including necessary greasing and replacement of UNSV portion like anchoring road, ball bearing, shutter etc and re fixing in the same opening complete all as specified and directed. Note:- Spare parts required shall be measured and paid separately under relevant item as Supply only. |
| 2 | Dismantling structural steel work including doors, gates but excluding framed truss etc wherever required complete all as specified and directed. |
| 3 | M&L mild steel round bars Fe 410-W (Gde-E- 250) quality-A, in available lengths complete all as specified and directed. |
| 4 | Supply only Ball bearing for rolling shutter as per existing size complete all as specified and directed |
| 5 | S&F steel rolling shutters of 1.25 mm thick without ball bearing as specified including top cover, anchoring rod, hasp & staple and one shop coat of primer; erected in position as indicated push pull or manual type complete all as specified and directed. |
| 6 | S&F safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed. |
| 7 | M&L for preparing new or previously untreated steel surface of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 8 | S&F Mild steel, plain, black sheet, 1.25 mm thick in wall cladding,steel gates and similar work, cut to size, holes punched; including round headed screws, nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed. |
| 9 | S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming to Fe-290 (Gde E-165) complete all as specified and directed. |
| 10 | S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachement conforming to Fe-290 (Grade E-165) complete all as specified and directed. |
| 11 | Taking down cement plaster of any description on bricks walls etc, including racking out joints, hacking for keys, scrubbing down with water etc, complete all as specified and as directed. |
| 12 | Demolition of brick work or stone/boulder masonry, built in cement or lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 13 | Material and labour for Brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 14 | M&L for rendering 15mm thick in (CM 1:4) with WPC on fair faces of brick work or concrete surfaces and to be finished fair and even complete all as specified and as directed. Note: WPC shall be measured paid separately. |
| 15 | Supply only integral water proofing compound complete all as specified and as directed. |
| 16 | M&L for Preparation of new plastered surface on wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces in camouflage pattern complete all as specified and as directed. |
| 17 | Demolition of Cement concrete (unreinforced) of any description and in any position, surface channels not otherwise specifically provided for complete all as specified and directed |
| 18 | M&L for providing cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate as in coping, surface channnel of drains,bed plates including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 19 | M&L for 75mm thick cement concrete type C-2, ( 1:3:6) (40 mm graded aggregate) as in plinth protection finished fair and even without using extra cement etc complete all as specified and as directed. |
| 20 | M&L for 40mm thick cement concrete type B-1, ( 1:2:4) (20 mm graded aggregate) finished even and smooth without using extra cement etc complete all as specified and as directed. |
| 21 | Dismantling of Plain or corrugated steel sheeting, of any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed. |
| 22 | Dismantling Asbestos cement (corrugated and semi-corrugated etc sheet) in roof coverings complete all as specified and directed. |
| 23 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed. |
| 24 | S&F prepainted galvalume aluminium zinc coating GI based plain sheet 0.5mm thk of any colour having tensile strength of 550MPa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 25 | S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed. Please Enable Macros to View BoQ information |
