|
| 1 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 2 | Dismantling timber scantlings 40 sq. cm and over in section, in any position as in framed work, complete all as specified and directed . |
| 3 | Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing specified complete all as specified and directed. |
| 4 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft loose of soil complete all as specified and directed. |
| 5 | Excavating over areas exc 1.5 mtr wide & n.exc 1.5 mtr deep and getting out in soft/loose soil complete all as specified and directed. |
| 6 | Returning, filling in, including spreading levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed. |
| 7 | Removing excavated material n exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed. |
| 8 | S & F 0.50 mm thick pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 9 | S & F 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 10 | M & L for scantling of second class soft wood, clean sawn timber framed and fixed in complete all as specified and directed. |
| 11 | M&L for Preparation of wood or wood based materials new or old of any description and girth and treated with two coat of creosote complete all as specified and directed. |
| 12 | M & L for non - skid ceramic tiles, (first quality of approved class, colour and design/shade) 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sq m but not exceeding 0.18 Sq m, as in floor surfaces etc. over & including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed. |
| 13 | M & L for glazed ceramic tiles (coloured) 300x600 x 7mm thick on vertical surfaces such as dado, skirting etc., with dark border in middle set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10 mm thick rendering as backing coat in cement mortar 1:4, complete all as specified and as directed. |
| 14 | M&L for precast cement concrete block masonry with solid blocks exc 10 cm in width with PCC (1:3:6), type C-1, (using 20mm graded crushed stone aggregate) and setting in CM(1:6) complete all as specified and as directed. |
| 15 | M & L for walling of random rubble, uncoursed well bonded, bedded and solidly hearted, built in CM 1:6 complete all as speicifed and directed. |
| 16 | Extra for hammer dressing to face stones with maximum depression on face from a straight edge not exc 40mm and dressing face beds and joints as specified to random rubble, uncoursed walling complete all as specified and directed. |
| 17 | M & L for External angles (for quoins and jambs) in facings for walling of random rubble uncoursed or brought up to coursed complete all as specified and directed. |
| 18 | M & L for raised pointing to random or polygonal rubble, uncoursed or brought upto courses in CM 1:4 complete all as specified and directed. |
| 19 | M & L for PCC 1:4:8 Mix, Type D2 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concretecomplete all as specified and directed. |
| 20 | M & L for Plain cement concrete 1:2:4 Mix, type B1 (using 20 mm graded crushed stone aggregate) as in coping including necessary form work complete all as specified and directed. |
| 21 | M & L for Plain cement concrete 1:3:6Mix, type C1 (using 20 mm graded crushed stone aggregate) as bond stone for stone walling (of any section indicated), with plain fair faces, including chamfers, weatherings, thorating etc and setting in mortar 1:6 complete with joints to match complete all as specified and directed. |
| 22 | M & L for loose filling with aggregates of gauge 80 to 150 mm in soakage pits, soakage wells, retaining wall back filling complete all as specified and directed. |
| 23 | S & F 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 24 | M & L for 75 mm thick plain cement concrete 1:3:6 Mix, type C2, (using 40 mm graded crushed stone aggregate) as in plinth protection finished even and smooth without using extra cement and making 50 mm deep joints at every 3 metre interval and at every corner and filling the joints with bitumen of grade 85/25 and sand mixture 1:3 complete all as specified and directed. |
| 25 | M & L for 40 mm thick Cement concrete type B-1, 1:2:4 Mix, (using 20mm graded crushed stone aggregate) as in topping and finishing cement concrete surface even and smooth using extra cement complete all as specified and directed. |
| 26 | Forming Contraction (Dummy) joints 40mm deep x 10mm wide, filled with grade 'A' sealing compound complete all as specified and directed. |
| 27 | M & L for laying Synthetic Acrylic flooring in 8 layers as given below (i) to (iv):-(i) Applying a coat of 0.2-0.3mm thick pure acrylic primer mixed with portable water at the ratio of 1:2 by using a roller or squeegee wiper at the rate of 700 to 900 gms/sqm to prevents delaminating and seals minor cracks and pores. Allow the primer is completely dry at least 2 hours before applying the resurfacer to ensure proper adhesion and a durable finish.(ii) Applying two layers of 0.2-0.3mm thick each acrylic resurfacer mixed with fine silica sand, cement and portable water in the ratio of 1:0.75:1.30 by using a squeegee wiper at the rate of 350 to 550 gms/sqm for a layer to fill minor cracks and imperfections, improves surface uniformity, enhances durability and prepares the base for cushioning. Allow for a minimum of 24 hours of curing time under good drying conditions before allowing second layer and second layer should be applied at a 90-degree angle to the first.(iii) Applying two layers of 0.2-0.3mm thick each acrylic cushion coating mixed with coarse rubber particles and portable water in the ratio of 1:0.25:0.75 by using a squeegee wiper at the rate of 600 to 750 gms/sqm for a layer to adds resilience and flexibility. Allow each layer to be dry at least 3 hours before allowing second layer and second layer should be applied at a 90-degree angle to the first.(iv) Applying two layers of 0.3-0.5mm thick each acrylic color mixed with silica sand and portable water in the ratio of 1:1.30:0.50 by using a squeegee wiper at the rate of 250 to 350 gms/sqm for a layer to provide high durability and excellent grip. Allow each layer to be dry at least 1 hour before allowing second layer and second layer should be applied at a 90-degree angle to the first(v) Applying finial coat of 0.2-0.3mm thick acrylic cushion coating mixed with fine rubber particles and portable water in the ratio of 1:0.25:0.75 by using a squeegee wiper at the rate of 600 to 750 gms/sqm to adds resilience and flexibility. |
| 28 | M & L for line marking of the basketball court using acrylic line marking primer, after masking tape has been laid, to seal voids between masking tape and court surface to prevent bleed-under when line paint is applied then apply a minimum of 2 coats of acrylic line paint in accordance with manufacturer’s instructions. The width of Line must be 40 mm wide complete all as specified and directed. |
| 29 | M & L for 15 mm thick rendering in cement mortar 1:4 fair faces of brick work or concrete surfaces finished even and smooth without using extra cement all as specified and as directed. |
| 30 | Preparing newly plastered surfaces of wall and applying with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) over 1 mm thick wall care putty complete all as specified and directed. |
| 31 | M & L for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed. |
| 32 | M & L for providing edge moulding to 18-20 mm thick granite stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc complete all as specified. |
| 33 | S & F powder coated (min thickness of powder coating 50 micron) anodised aluminium frame for doors, windows , ventilators plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified and as directed. |
| 34 | S & F laying and testing 16 mm dia (normal bore) of CPVC pipes SDR 11 & Plain CPVC SDR 11 and including all CPVC fitting such as unions, reducer sockets, socket reducing bends, elbows, tee, check nuts, caps, plugs etc. fixed complete to walls & ceiling or laid in floors concealed or exposed, complete all as specified and directed. |
| 35 | S & F laying and testing 20 mm dia (normal bore) of CPVC pipes SDR 11 & Plain CPVC SDR 11 and including all CPVC fitting such as unions, reducer sockets, socket reducing bends, elbows, tee, check nuts, caps, plugs etc. fixed complete to walls & ceiling or laid in floors concealed or exposed, complete all as specified and directed. |
| 36 | M & L for cutting chases, pinning in for concealed water tubing, not exc 10 cm girth and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc, complete all as specified and directed. |
| 37 | S & F of ring fit PVC (SWR) pipe of 110 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end as self socketed with an integral groove to hold the rubber gasket, with and incl rubber tighten gaskets, ringfit sockets etc, complete pipe duly laid in trenches or in floors, complete all as specified and directed. |
| 38 | S & F of ring fit PVC (SWR) pipe of 75 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end as self socketed with an integral groove to hold the rubber gasket, with and incl rubber tighten gaskets, ringfit sockets etc, complete pipe duly fixed to wall, complete all as specified and directed. |
| 39 | S & F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed. |
| 40 | S & F 75 mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 41 | S & F PVC (SWR) bends 110 mm dia complete all as specified and as directed |
| 42 | S & F PVC (SWR) bends 75 mm dia complete all as specified and as directed |
| 43 | S & F 28 mm dia drapery rod stainless steel in any length, including a pair of brackets, complete all as specified and directed. |
| 44 | S&F Decorative finals stainless steel in matching colour of rod, fixed in repairs complete all as directed. |
| 45 | S & F single handle wash basin mixer, pillar tap CP for mixing hot & cold water screwed down for iron pipe and fixed with out popup waste system made of cast copper alloy, chromium plated fancy type, suitable for 15 mm dia bore pipe, complete all as specified and directed. |
| 46 | S & F angular stop cock 15 mm dia with wall flange, fancy type, made of cast copper alloy, chromium plated, screwed down, screwed for iron pipe or for brass ferrule, ISI marked, complete all as specified and directed. |
| 47 | S & F 15 mm dia two way bib cock, 15 mm dia with wall flange, fancy type, made of cast copper alloy, chromium plated, screwed down, screwed for iron pipe or for brass ferrule, ISI marked, complete all as specified and directed. |
| 48 | S & F in repairs 3-in-1 wall mixer with provision for overhead Shower with 115 mm long bend pipe on upperside, connecting legs & wall flanges, made of cast copper alloy, chromium plated fancy type, complete all as specified and directed. |
| 49 | S & F PVC connection of 600 mm length, suitable for 15 mm bore pipe with PTMT nuts complete all as specified and directed. |
| 50 | S & F PVC flexible waste pipe, 40 mm dia, suitable for WHBs/Urinals including threaded PVC socket suitable for shank of waste coupling complete all as specified and directed. |
| 51 | S & F waste coupling, chromium plated (half or full threaded), 40 mm dia size, complete all as specified and directed. |
| 52 | S & F Grating square fitting of size 150mm made in two parts for smell and mosquito proofing with hole for waste pipe complete all as specified and directed. |
| 53 | S & F Corner glass shelf assembly with bracket complete all as specified and as directed. |
| 54 | S & F toilet paper holder with flat recessed type stainless steel fixed to walls with chromium plated brass screws, complete all as specified and as directed. |
| 55 | S & F hand shower (Health faucet) with 1 Mtr flexible tube with wall hook bracket etc, complete set of superior quality complete all as specified and directed. |
| 56 | S & F Aluminium Hat and coat hooks, solid body, 175mm to 250 mm complete all as specified and directed |
| 57 | S & F brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed. |
| 58 | S & F PVC cabinet mirror of size 450x175x450 fixed in wall with screw complete all as specified and directed. |
| 59 | M & L for 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 60 | M & L for 100 mm dia cast iron nahani trap, including jointing to soil pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 61 | S & F vitreous china wash basin white,flat back of size 630x450 mm excluding taps,waste pipe,chain and plug and procelain stopper but including brackets complete all as specified and directed. |
| 62 | S & F vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed. |
| 63 | S & F plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 64 | S & F PVC valveless syphonic action type flushing cistern (Low or high level) of 10 litre capacity, white/coloured with inlet ball valve, float, handle including fixing brackets and 32 mm bore PVC flush pipe etc complete all as specified and directed. |
| 65 | S & F Brass chromium plated shower rose 125mm size with shower arm 15 mm size, 195mm long with bend of 45degree with flange of stainless steel complete all ,as specified and directed. |
| 66 | M & L for framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. n exc 10 kg each brackets, conforming to Fe-290, Gde-E-165 complete all as specified and directed. |
| 67 | S & F triple layered WHITE COLOUR 1000 Ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 2 Nos 25 mm dia tank nipple and 1 No 32 mm dia drain plug and cover of tank all as specified in SSR Part I complete all as specified and directed. |
| 68 | S & F in repairs 20 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed with 25 mm bore pipe complete all as specified and directed. |
| 69 | S & F in repairs 20 mm bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 70 | Taking down chowkhats with shutters (without taking off shutters from the frame) area not exc 1.5 sqm each including cutting holes in brick/ stone wall built in cement / lime mortar, embedded portion exc half brick but n.exc one brick for inserting new hold fast and making good the disturbed portion/surfaces, in CM 1:3 complete all as specified and directed. |
| 71 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in Soft/disintegrated soil complete all as specified and directed. |
| 72 | M & L Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per sqm of surface area complete all as per specified and directed. |
| 73 | M & L Treating the top surface of filled at the rate of 5 litres of emulsion per sqm of surface area complete all as per specified and directed. |
| 74 | M & L for precast cement concrete solid (1:3:6) type C-1 using 20mm graded stone aggregate building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in mortar (1:6), complete, in walls complete all as specified and directed. |
| 75 | M & L for rendering 10 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 76 | M & L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper over a coat of chalk whitening primer over 1 mm thick wall care putty complete all as specified and directed. |
| 77 | M & L for structural steel work in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including welding to existing steels and distance pieces, cleats etc conforming to Fe 410-W(Gde-E- 250) quality-A complete all as specified and directed. |
| 78 | M & L for preparing surface of steel & iron work of any description exc 10 cm width or girth & applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 79 | S & F 4 mm thick E-board non asbestos fibre cement building boards false ceiling (Classic) including galvanised colour coated snap grid frame for false ceiling, size of grid 605 X 605mm fixed with 1.6 mm dia GI wire suspenders one end tied to roof members and other end connected to main tee of grid framework by means of 4mm dia adjustable \\"J\\" hook consisting of two Nos washers and two nuts at 1.2 mtr centres, size of main tee 38mm X 25mmX 1.4mm, cross tee 38 mm X 25 mm X 1.4mm, angle along walls 38 mm X 25mm X 2.0 mm etc complete all as specified and directed. |
| 80 | M & L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite & including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and as directed. |
| 81 | Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and directions. |
| 82 | M & L for solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed. |
| 83 | S & F aluminium guide rail three track having two PVC wheel 50 mm dia for smooth functioning of cupboard/door shutter complete all as specified and directed. |
| 84 | S & F compacted recessed handle of size 150 mm suitable for sliding door as specified and directed |
| 85 | M & L for 4.80 mm thick sheet glass ordinary quality and glazing fixed to aluminium frame exc 0.50 sqm in each pane complete all as specified and as directed. |
| 86 | S & F galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with tinned tacks, or galvanised wire staples including etc complete all as specified and directed. |
| 87 | S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grain printed PVC sheet and matching edges, reinforced with MS square tube, as specified in SSR Part-II 2010 (Section 8, on Page no - 175), complete all as specified and directed. |
| 88 | S & F 30 mm thick factory made solid PVC moulded door shutter (Stiles) with 2, 4 or 6 raised panel design with 2 mm thick Wooden texture moulded PVC sheet on the front face and 2 mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification and drawing, complete all as specified and directed. |
| 89 | S & F 100 mm long butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed. |
| 90 | S & F 150 mm long aluminium, anodised, barrel tower bolt (ISI marked) of extruded section and fixed complete all as specified and directed. |
| 91 | S & F 150 mm size extruded aluminium alloy handle, (ISI marked) fabricated type anodised fixed complete all as specified and directed. |
| 92 | M & L for hardcore of broken stone or boulders gauge n exc 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed. |
| 93 | M & L for 100 mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base and finishing cement concrete surface even and rough complete all as specified and directed. |
| 94 | M & L for concrete bed 100 mm thick PCC 1:4:8 type D-2 ( using 40 mm graded stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 110 mm bore pipe complete all as specified and directed. |
| 95 | Supply only integral water proofing compound ISI Marked complete all as specified and directed. |
| 96 | M & L for plain cement concrete 1:2:4, type B-1 using 20 mm graded aggregate as in surface channels and drains complete all as specified and directed. |
| 97 | M & L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms moulds mitred/stopped ends etc complete as specified and directed. |
| 98 | M & L for mild steel work as in handles of cover slab and rungs and similar small articles conforming to Fe-415-0o or Fe-310-06 complete all as specified and directed. |
| 99 | M & L for cover to manhole cover etc. made out of 1 mm thick mild steel, plain, black sheet, cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as specified and directed. |
| 100 | M & L for cutting into existing manholes for connecting new drains 150 mm dia making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete all as specified and directed. NOTE FOR ALL ITEMSIn case in BOQ any item found repeated and contractor quotes different rate for the same, the rate quoted on lesser side shall only be applicable for payment and no claim whatsoever on this account shall be entertained by the Department. Please Enable Macros to View BoQ information |
