|
| 1 | Civil Work |
| 2 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 5km for all lifts, complete as per directions of Engineer-in-charge.harge. (Ref:-1.1.18) |
| 3 | Providing and fixing 35mm thick wire gauze shutters using galvanised M.S. wire gauze of average width of aperture 1.4 mm with wire of dia. 0.63 mm for doors, windows and clerestory windows including ISI marked bright finished or/ and black enamelled M.S. butt hinges along with 150mm long MS handle with necessary screws. |
| 4 | 35 mm thick shutters |
| 5 | With ISI marked M.S. pressed butt hinges bright finished of required size |
| 6 | Kiln seasoned and chemically treated Hollock wood.(Ref:-9.27.1.1.2) |
| 7 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm pressed, mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: |
| 8 | Profile C |
| 9 | Fixing with adjustable lugs with split end tail to each jamb(Ref:-10.14.2.1) |
| 10 | 12mm Thick cement plaster of mix : |
| 11 | 1:6 (1 cement: 6 fine sand) (Ref:-13.1.2) |
| 12 | Distempering with oil bound washable distemper of approved brand and manufacture to give |
| 13 | New work (two or more coats) over and including priming coat with cement primer. (Ref:-13.41.1) |
| 14 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 15 | New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) (Ref:-13.46.1) |
| 16 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (Ref:-13.80) |
| 17 | White washing with lime to give an even shade. |
| 18 | Old work (two or more coats) (Ref:-13.87.1) |
| 19 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 20 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: |
| 21 | One or more coats on old work. (Ref:-13.99.1) |
| 22 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge . (Ref:-15.2) |
| 23 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 24 | 1:4:8 or leaner mix (Ref:-15.2.2) |
| 25 | Demolishing brick work maually / by machincal means including stacking of serviceable material and disposal of unserviceable material with in 50 metres lead as per direction of Engineer In -Charge |
| 26 | In Cement Mortar (Ref:-15.7.4) |
| 27 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres. (Ref:-15.56) |
| 28 | Pointing on tile brick work with cement mortar 1:3 ( cement :3 fine sand): |
| 29 | Flush/ Ruled/ Struck or weathered pointing (Ref:-13.32.1) |
| 30 | Public Health Work |
| 31 | Providing and fixing Ist quality ceramic glazed wall tiles (200mmx300mm)conforming to IS : 15622 of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (Ref:-11.36) |
| 32 | Providing and laying Ceramic glazed floor tiles 300x300 mm of 1st quality conforming to IS : 15622 of approved make in all colours, shades, except White, Ivory, Grey, Fume Red Brown laid on 20mm thick bed of Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigments etc., complete. |
| 33 | 12 mm cement plaster of mix : |
| 34 | 1:6 (1 cement: 6 fine sand) (Ref:-13.1.2) |
| 35 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. |
| 36 | New work (two or more coats) over and including priming coat with cement primer. (Ref:-13.41.1) |
| 37 | Providing appling white cement based putty (Ref:-13.80) |
| 38 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 39 | 1:4:8 or leaner mix (Ref:-15.2.2) |
| 40 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: |
| 41 | Of area 3 sq. metres and below (GF and FF) (Ref:-15.13.1) |
| 42 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : |
| 43 | 15 mm to 40 mm nominal bore (Ref:-15.44.1) |
| 44 | Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes, lead at site within 50 metre lead as per direction of Engineer-in-charge: |
| 45 | Up to 150 mm diameter(GF and FF) (Ref:-15.45.1) |
| 46 | Dismantling of flushing cistern of any size including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.(GF and FF) (Ref:-15.52) |
| 47 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (Ref:-15.56) |
| 48 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required |
| 49 | White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. (Ref:-17.1.1) |
| 50 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (Ref:-17.31) |
| 51 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm with fittings, standard size C.P. brass flush pipe, spreaders with waste fitting Complete (Ref:-N.S.) |
| 52 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm pressed, mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:(Ref:-10.14) |
| 53 | Providing and fixing door piece, insertion rubber washer 3mm thick, bolts & nuts complete : |
| 54 | 100 mm |
| 55 | Sand cast iron S&S as per IS - 3989 (Ref:-17.55.1.2) |
| 56 | 75 mm |
| 57 | Sand cast iron S&S as per IS - 3989 (Ref:-17.55.2.2) |
| 58 | Providing and fixing collar: |
| 59 | 100 mm |
| 60 | Sand cast iron S&S as per IS - 3989 (Ref:-17.57.1.2) |
| 61 | 75 mm |
| 62 | Sand cast iron S&S as per IS- 3989 (Ref:-17.57.2.2) |
| 63 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : |
| 64 | 100 mm inlet and 75 mm outlet |
| 65 | Sand cast iron S&S as per IS - 3989 (Ref:-17.60.2.1) |
| 66 | Providing And Fixing white vitreous chinaware pedestal type water closet (European type W.C.pan ) with seat and lid, 10 litre low level white P.V.C flushing cistren with manually controlled device ( handle lever), conforming to IS: 7231, with all fittings and fixtures complete including cuting and making good the walls and floors wherever requried: |
| 67 | W.C. pan with ISI marked white solid plastic seat and lid (Ref:-7.2.2) |
| 68 | Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall |
| 69 | 15 mm dia nominal bore (Ref:-18.11.1) |
| 70 | 20 mm dia nominal bore (Ref:-18.11.2) |
| 71 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. |
| 72 | 25 mm dia. nominal bore(In DucT) (Ref:-18.12.4) |
| 73 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : |
| 74 | 25 to 40 mm nominal bore (Ref:-18.13.1) |
| 75 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete |
| 76 | 20 mm nominal bore (Ref:-18.18.2) |
| 77 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 78 | 30 cm length |
| 79 | 15 mm nominal bore/GF and FF (Ref:-18.21.1.1) |
| 80 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : |
| 81 | 15 mm nominal bore. (Ref:-18.47.1) |
| 82 | 20 mm nominal bore. (Ref:-18.47.2) |
| 83 | 25 mm nominal bore. (Ref:-18.47.4) |
| 84 | Cutting holes upto 30x30 cm in walls including making good the same: |
| 85 | With F.P.S. bricks (Ref:-18.76.1) |
| 86 | Providing & Fixing factory manufactured commercial flush shutter 30 mm thicked lipped all around including hillock wood chowkats size 60mm x 90mm and stainless steel fittings i.e. handles 5\\" hinges 4 to 5 tower bolt 8 and 6\\" stopper etc. Complete in all respect asper instruction of the Engineer-in-Charge. (Ref:-N.S.) |
| 87 | Providing and fixing CP Bottle Trap for Wash basin and sink. complete in all respect to the entire satisfaction of the engineer in-charge. (Ref:-N.S.) |
| 88 | Providing and fixing uplasticised PVC connection pipe with brass unions (Ref:-N.S.) |
| 89 | Providing and fixing in position C.P. Towel rail (size 25 mm dia, length 18\\" long) with bracket fixed to wooden cleats with C.P. Brass screws., complete in all respect to the entire satisfaction of the engineer-in-charge. (Ref:-N.S.) |
| 90 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet |
| 91 | 100 mm diameter (Ref:-N.S.) |
| 92 | Providing and fixing in position 15mm C.P. Brass long body bib tap, complete in all respect to the entire satisfaction of the engineer-in-charge. (Ref:-N.S.) |
| 93 | Providing and fixing in position 15mm i/d C.P. Brass short body with S.S. flange bib cock, complete in all respect to the entire satisfaction of the engineer-in-charge. (Ref:-N.S.) |
| 94 | Providing and fixing in position 15mm i/d C.P. Brass angle cock with S.S. flange bib cock, complete in all respect to the entire satisfaction of the engineer-in-charge. (Ref:-N.S.) |
| 95 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (Ref:-N.S.) |
| 96 | 20 mm dia. nominal bore |
| 97 | 25 mm dia. nominal bore |
| 98 | 25 mm dia. nominal bore |
| 99 | Providing and fixing wash Oval Shape basin with, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : |
| 100 | White Vitreous China Oval Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps.GF and FF (Ref:-N.S.) |
| 101 | Providing and fixing soil, waste and vent pipes : |
| 102 | 100 mm dia. |
| 103 | Centrifugally cast (spun) iron socketed pipe as per IS: 3989. (Ref:-N.S.) |
| 104 | 75 mm diameter : |
| 105 | Centrifugally cast (spun) iron socketed pipe as per IS: 3989. (Ref:-N.S.) |
| 106 | Removal of W.C chinaware from toilets complete in all respects to the entire satsfaction of the engineer- in charge (Ref:-N.S.) |
| 107 | Removal of W.H. basin toilets .Complete in all respects to the entire satsfaction of the engineer- in charge(Ref:-N.S.) |
| 108 | Cement concrete 1:8:16 with stone ballast 32mm guage in foundation and plinth. Complete respect to the entire satisfaction of the Engineer-in-charge.(Ref:-N.S.) |
| 109 | Removal of malba from site of work to out side of building and out side the campus complete in all respect to the entire satisfaction of the engineer-in charge(Ref:-N.S.) |
| 110 | Providing and fixing in position 15mm C.P. Brass nipples. Complete as per entire satisfaction of the engineer-in-charge.(Ref:-N.S.) |
| 111 | P/f 32 mm GI waste pipe to disposal of water.compleate in all respect(Ref:-N.S.) |
| 112 | Providing and fixing 4mm thick wired glass panes with putty or beading. (Ref:-N.S.) |
| 113 | Providing & fixing in position double layer polyethylene PVC water storage tank with cover & suitable locking arrangement including necessary holes for inlet, outlet, overflow pipes. (Make: Diplast/Sintex ISI marked) The work includes tank based support of 9” brick work (height of base as per site) in any form and base filled with sand, final top layer with 25mm thick concrete of 1:2:4 ratio duly plastered with 12mm thickness all around the tank including cement coating. Complete including the necessary G.I. fittings/tank nipple of required size to tank in all respect to the entire satisfaction to the Engineer-in-charge. (Ref:-N.S. Please Enable Macros to View BoQ information |
