|
| 1 | Working Charges |
| 2 | 2.31:Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared |
| 3 | 2.32:Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 4 | 50.2.33.5:Cutting branches of trees overhanging above any structures of girth between 40cm to 60cm including stacking of serviceable materials and disposal of unserviceable material, cost of labour, hire charges of rope and pully etc without making any damages to nearby structures etc complete. |
| 5 | 15.12.2:Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area beyond 3 sq. metres |
| 6 | 15.10.2:Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually / by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge:In cement mortar |
| 7 | 15.23.2:Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles above 25 mm and up to 40 mm |
| 8 | 15.3:Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge. |
| 9 | 15.5:Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work ( Payment shall be made on the cross sectional area of R.C.C. or R.B work) as per direction of Engineer-in-charge. |
| 10 | 50.6.7.1:Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for foundation and basement including all cost of materials, labour charges etc. |
| 11 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 12 | 14.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand) |
| 13 | 13.80:Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 14 | 13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer |
| 15 | 13.82.2:Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture including applying additional coats wherever required, to achieve even shade and colour.Two coats |
| 16 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 17 | 9.119:Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos. of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door fame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer-in Charge. |
| 18 | 9.120.1:Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and sized of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of whicj 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5mm thick, 95 mm wide PVC sheet out of which75 mm shall be tapered in 45 degree on th inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mmx2) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded /sealed to the styles & rails with 7 mm (5 mm + 2 mm ) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer -in-charge, manufacture's specification & drawing.30 mm thick plain PVC door shutters |
| 19 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) |
| 20 | 21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 21 | 21.3.3:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm) |
| 22 | 21.13:Providing and fixing Brass100 mm mortice latch and lock with 6 levers without pair of handles ( best make of approved quality ) for aluminum doors including necessary cutting and making good etc. complete |
| 23 | 21.16.2:Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in-Charge.Powder coated minimum thickness 50 micron aluminium |
| 24 | 14.34:Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete |
| 25 | 21.19.2:Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structuralnon sag elastomeric PU sealant over backer rod of approved quality as perarchitectural drawings and direction of Engineer-in-charge complete,complying to ASTM C920, DIN 18540-F & ISO 11600Upto 10 mm depth and 10 mm width |
| 26 | 100.9.5:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 50 mm nominal outside diameter pipes. |
| 27 | 100.9.9:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 110 mm nominal outside diameter pipes. |
| 28 | 100.98.233:Supply of PVC Pipe, 10kg/cm2, 50mm Dia. |
| 29 | 100.98.237:Supply of PVC Pipe, 10kg/cm2, 110mm Dia. |
| 30 | 17.3.1:Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid |
| 31 | 17.35.1.1:Providing and fixing soil, waste and vent pipes:100 mm diaSand cast iron S & S pipe as per IS : 1729 |
| 32 | 17.7.5:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Angle back wash basin size 600x480 mm with single 15 mm C.P. brass pillar tap |
| 33 | 11.46.2:Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm |
| 34 | OD333838/2025-2026:Providing bio compost bin (3 bin composter) including all materials and labour charges |
| 35 | OD333834/2025-2026:Providing and fixing sanitary napkin incinerator |
| 36 | OD333836/2025-2026:Providing and fixing good quality roller blind curtains of the color of blue/ivory/ash/brown ofequivalent color as per the direction of the engineer in charge. The cost includes labor, materialall other incidental charges if any. |
| 37 | OD333837/2025-2026:Supplying, testing and commissioning 3KVA/72VDC online sine wave UPS exide EL and necessary specifications.3+3 nos Batteries of 100AH with inter connecting nut bolts and battery cabinet bed. |
| 38 | 50.17.1.4:Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge. |
| 39 | OD346413/2025-2026: Providing and fixing false ceiling 12.5 mm Gyproc gypsum board, GI (ultra and equivalent) channel 80*26*05 mm) ultra intermediate channel (45x15x15x0.91mm) ultra perimeter channel (20x27x30x05mm) ultra ceiling angle (25x10x0.5mm), wall partition and paneling work 120 cm height all round wall paneling 9mm marine ply wood backing,3 mm veneer,,electrical work for ceiling lights and projector ,AC , ceiling and wall 2 coat putty,primer,2 coat emulsion , veneer polish 2 coat sealer and PU Matt etc for Superintending engineer office- cabin interior work - |
| 40 | OD346424/2025-2026:Providing and fixing Blue star 2TR INV 5* split AC -2 NOS, V guard stabilizer5kv -2 nos, out door stand for 2TR-2 NOS, COPPER refrigerant piping (totaline) Superintending engineer office- cabin interior work - |
| 41 | OD54130/2026-2027:3% for PVC specials |
| 42 | OD54134/2026-2027:supplying and fixing water purifier infront of bill counter |
| 43 | Electrical Work |
| 44 | OD333863/2025-2026:Supplying 20mm best quality wiring pipe including all cost of materials , conveyance etc complete |
| 45 | OD333841/2025-2026:supply and provide 1sqmm FRLS 2core copper wire |
| 46 | OD333844/2025-2026:Supply and provide good quality 2.5 Sq mm FRLS copper wire |
| 47 | OD333853/2025-2026:Supply and provide 1.5 sq mm FRLS copper wire |
| 48 | OD333847/2025-2026: Supplying Tube light with best quality including all cost of materials , conveyance etc complete |
| 49 | OD333942/2025-2026:Supply and provide modular type one way switch 6 A |
| 50 | OD333866/2025-2026:Supplying ceiling rose etc..complete |
| 51 | OD333843/2025-2026:Supplying round block, etc..complete |
| 52 | OD333869/2025-2026:Supplying 2 way switch etc..complete |
| 53 | OD333867/2025-2026:Supplying 5 amps 3 pin socket |
| 54 | OD333865/2025-2026:Supplying 1 way junction BOX |
| 55 | OD333851/2025-2026:Supplying 2 way junction box |
| 56 | OD333856/2025-2026:Supplying 3 way junction box |
| 57 | OD333861/2025-2026:Supplying 32 amps 3 pin socket |
| 58 | OD333850/2025-2026:Supplying 16 amps switch |
| 59 | OD333868/2025-2026:Supplying power plug |
| 60 | OD333864/2025-2026:Engaging Electrician |
| 61 | OD333857/2025-2026:supply P V C wall plug 20 mm metal clamp SS screw |
| 62 | OD333855/2025-2026:Supply best Quality wiring pipe bend 20 mm |
| 63 | OD333848/2025-2026:Supply and provide good quality 2 MD Electronic step Regulator |
| 64 | OD333842/2025-2026:Supply and provide good Quality 12 M D Plate |
| 65 | OD333845/2025-2026:Supply and Provide Surface box ,12 MD |
| 66 | OD333852/2025-2026:Supply and provide 6 MD open box |
| 67 | OD333859/2025-2026:Supply and provide best quality 6 M D plate |
| 68 | OD333860/2025-2026:Supply and provide best quality ceiling fan |
| 69 | OD333862/2025-2026:Charges Supplying 8 MD Surface box and surface plate |
| 70 | OD333854/2025-2026:Supplying and fixing 3 MD Switch box 3MD Surface box including all cost of materials , conveyance etc complete |
| 71 | OD333849/2025-2026:supply good quality Exhausted fan |
| 72 | OD333969/2025-2026:Charges for supplying LED ceiling panel light Please Enable Macros to View BoQ information |
