|
| 1 | Supply of LT 1.1 kV grade , XLPE insulated, Aluminium conductor,Armoured cable of size: 400 sq.mm/ 4C (ISI marked) conforming to IS:7098 (Part-I) with upto date amendments and as per pecifications attached. |
| 2 | Laying of XLPE insulated LT 1.1 KV grade cable of size 400 Sqmm./4C direct in ground including excavation, sand cushioning, protective covering & refilling the trench as per specifications |
| 3 | Laying of Additional XLPE LT 1.1 KV grade cable of size 400 Sqmm./4C direct in ground including excavation, sand cushioning, protective covering & refilling the trench as per specifications |
| 4 | Handling/Laying of XLPE insulated LT 1.1 KV grade cable of size 400 Sqmm./4C which are not necessarily laid in ground but part of it going up to panel, transformer & part in the building in open trench or otherwise. |
| 5 | Drawing of XLPE insulated LT 1.1 KV grade cable of size 400 Sqmm./4C in existing RCC/HDPE Pipe, closed duct, subway or Sub Station. ) |
| 6 | Road cut of any thickness (metalled/concrete) for one cable RoadBerm/Stone/Brick footpath/C.CSlab/Approach gate |
| 7 | Road cut of any thickness (metalled/concrete) for additional HT cable Road Berm/Stone/Brick footpath/C.CSlab/Approach gate |
| 8 | Supply and laying HDPE pipes ISI marked PN-4 class of size 125 mmdia (OD) across Road/Service Road by Trench less Technology invarious Roads/Service Road/Main Gate in NDMC area. |
| 9 | Supplying & making straight through joint with heat shrinkable kitincluding ferrules and other jointing materials for the LT cable of size 400sqmm/4C of PVC Insulated and PVC Sheathed/XLPE aluminium conductore cable of 1.1KV grade as required .[ MAKE : 3M / Cabseal / Raychem/Denson ] |
| 10 | Supplying and making end termination for L.T. XLPE 1.1 KV cable ofsize 400 sq.mm/4C[ MAKE : 3M / Cabseal / Raychem/Denson ] |
| 11 | Ground Penetration Radar Survey (GPRS) for laying of cable |
| 12 | Supply & Fixing of RCC Cable Route Markers and joint Markersincluding inscription duly engraved as per site requirement |
| 13 | Supply, Installation, Testing and Commissioning of General SupplyFeeder Pillar along with Bus Bars, HRC Fuses etc. with all accessories and fitments complete in all respect as per site requirement and as per specifications attached |
| 14 | Supply, Installation & Testing of Maintenance Free chemical Earthingas per specifications attached |
| 15 | Providing & fixing 25mm X 5 mm GI strip on surface or in recess forconenctions etc as required for feeder pillar |
| 16 | Add GST@18% Please Enable Macros to View BoQ information |
