|
| 1 | Demolition of Cement concrete (unreinforced) of any description and in any position, surface channels not otherwise specifically provided for complete all as specified and directed |
| 2 | M&L for 75mm thick cement concrete type C-2, ( 1:3:6) (40 mm graded aggregate) as in plinth protection finished fair and even without using extra cement etc complete all as specified and as directed. |
| 3 | M&L for 40mm thick cement concrete type B-1, ( 1:2:4) (20 mm graded aggregate) finished even and smooth without using extra cement etc complete all as specified and as directed. |
| 4 | M&L for 100mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) finished fair and smooth without using extra cement etc complete all as specified and as directed. |
| 5 | Dismantling of stone slabs & tiles of any description or thickness (except ceramic tiles) in floors, aprons etc laid bedded & pointed in any mortar complete all as specified and directed. |
| 6 | Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out in soft soil complete all as specified and as directed. |
| 7 | M&L for Hardcore using broken stone or boulders nexc 63 mm deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface all as specified and as directed. |
| 8 | M&L 75mm thk Cement concrete Type D2 1:4:8 (40 mm graded aggregate) in footpath/Hard standing complete all as specified and directed. |
| 9 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. |
| 10 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed. |
| 11 | Dismantling floor, hearth or wall tilling including cement mortar bedding (but not hacking) removing serviceable tiles to stores and rubbish off premises complete all as specified and as directed. |
| 12 | M&L Non Skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 in floors etc complete all as specified and as directed. |
| 13 | M&L for 450x350x7mm thick glazed coloured ceramic tiles in vertical surfaces set and jointed in neat cement slurry pointed in coloured cement to match over rendering 10mm thick on fair faces of brick work in CM (1:4) complete all as specified and directed. |
| 14 | M&L chequered Cement concrete tiles 20cm x 20cm x25mm thick, with grey cement and pigment set, jointed and pointed in neat cement slurry in floors, inluding Screed bed or bedding layer of mortar 15mm thick in CM (1:4) for laying floor finishes complete all as specified and directed. |
| 15 | M&L vitrified ceramic tiles with dark shade 10mm thick (Square/rectangular) area of each tile not exceeding 0.36 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match inluding Screed bed or bedding layer of mortar 15 mm thick in CM 1:4 for laying floor finishes complete all as specified. |
| 16 | All as per item Sl No 15.00 above but in vertical surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match including backing coat of 10mm thick in CM 1:4 on brickwalls for skirting/DADO complete all as specified and as directed. |
| 17 | Taking down cement plaster of any description on bricks walls etc, including racking out joints, hacking for keys, scrubbing down with water etc, complete all as specified and as directed. |
| 18 | Demolition of brick work or stone/boulder masonry, built in cement or lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 19 | Material and labour for Brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 20 | M&L for rendering 15mm thick in (CM 1:4) with WPC on fair faces of brick work or concrete surfaces and to be finished fair and even complete all as specified and as directed. Note: WPC shall be measured paid separately. |
| 21 | Supply only integral water proofing compound complate all as specified and directed. |
| 22 | M/L for two coats of white wash on new walls including preparation of new treated plaster surfaces complete all as specified and as directed. |
| 23 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exe 1.5Sqm but n exe 4Sqm each and removing to stores etc complete all as specified and as directed. |
| 24 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) n exe 1.5Sqm each and removing to stores etc complete all as specified and as directed. |
| 25 | Resecuring existing door/window shutter, easing, adjusting after taking down and refixing in the same opening, of any description n.exc 1sqm each complete all as specified and as directed. |
| 26 | Resecuring existing door/window shutter, easing, adjusting after taking down and refixing in the same opening, of any description exc 1sqm but n exc 2sqm each complete all as specified and as directed. |
| 27 | S&F powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows and ventilators with one or more rebates including joining cleat for fixing etc.complete all as specified. |
| 28 | S&F powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium door shutters with aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed. |
| 29 | S&F powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed |
| 30 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as per requirement and direction of Engineer-in-charge. |
| 31 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 32 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing. |
| 33 | Supply and Fix aluminium anodised barrel tower bolts 100mm size of extruded section complete all as specified and as directed. |
| 34 | Supply and fix aluminium handles Cast type anodized 100mm size etc complete all as specified and as directed. |
| 35 | S&F 100mm mild steel butt hinges medium weight including screws all as spefied and as directed. |
| 36 | Supply and fix 5.5mm thick ordinary Sheet glass fixed with clips and putty completed in squares in exc 0.5 sq.m in each pane complete all as specified and as directed. |
| 37 | Supply and fix aluminium wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. Please Enable Macros to View BoQ information |
