Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Preparation and submission of Detailed Design Documents & GFC drawings (Architectural, Structural, MEP, Interior, Furnitures) for all stages of work for Miscellaneous Civil, Interior and MEP Works for Office Facilities at High Court Terminal of Kochi Water metro project including all expenses towards the submission of reports, documentation, salary, administrative expenses including consumables, overheads, all as per the scope of works.Payment shall be made as followsOn approval of Architetural design & Layout - 10% On submission of all Architechural GFC Drawings- 10%On approval of all Architectural GFC Drawings - 10%On approval of all Civil & Strutural drawings - 10%On submission and Approval of SLD,Load, Earthing drawing & Equipment sizing calculation - 5%On Approval of Lighting details - 5%On Approval of HVAC drawings - 10%On Approval of Plumbing and fire fighting drawings - 10%On obtaining initial sceme EIG approval - 5%On obtaining the FIRE NOC - 5%On obtaining KSEB service connection - 5%On submission of Contractual documents like O&M manual, Warrenty certificate, Supply of Spare & Trainning - 10%On approval of As-Built drawings - 5% |
| 2 | Works at Hight Court OCC |
| 3 | Demolishing brick/solid block work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar |
| 4 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates,boltd, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. |
| 5 | Dismantling tile/granite work in floors and roofs laid in cement mortar/adhesive including stacking material within 50 metres lead. For Block work and race way works |
| 6 | Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge. |
| 7 | Engaging labour for miscellaneous work for dismantling works of existing Handrail and stacking as per the Engineer requirement |
| 8 | Assistant Fitter or 2nd class fitter |
| 9 | Coolie |
| 10 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. |
| 11 | Laying old cement concrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost.) |
| 12 | Providing and laying autoclaved aerated cement blocks masonry with AAC blocks in super structure above floor 2 level up to floorV level in cement mortar 1:4 (1 cement :4 coarse sand). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work. |
| 13 | 12 mm cement plaster finished with a floating coat of neat cement of mix:1:4 ( 1 cement : 4 fine sand) |
| 14 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 15 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer |
| 16 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 17 | Providing & Fixing 100mm thick solid partition consisting of 50mm thick Gypsteel ULTRA® Closed Stud partition which includes outer layer of tapered edge 12.5mm thick Gyproc® Board, screw fixed to Closed Stud on either side of framework 34x48x34x0.6mm Gypsteel ULTRA® Closed Stud (Material – IS513 CR1 Grade; Y/S-260Mpa Finish-Galvanized 120GSM as per IS277) placed at 610mm c/c in 32x50x32x0.5mm Gypsteel ULTRA® floor and ceiling channel (Material – IS513 CR1 Grade; Y/S-260Mpa Finish - Galvanized 120GSM - IS277). Floor & ceiling channel is anchored to the floor & True ceiling using Gyproc® Rawl plug Ø8x45mm{Material-IS 513 CR1 grade, Zinc coating, Pull Out Load 7.5kN for M20 concrete grade} /Hilti XGN20MX anchor fasteners at 600mm c/c . Floor channel to be wrapped with 70μ Self Adhesive LDPE moisture barrier film to further improve corrosion resistance performance. A Gypsteel ULTRA® noggin channel (Closed Stud) {Material-IS 513 CR1 grade /S-260 Mpa, Finish-Galvanized 120GSM as per IS277) of 34x48x34x0.6mm (576mm length) has to provided at the horizontal joints of the two boards & fixed with GI-L Angle 30x45x30x1m. Gyproc® Boards to be screw fixed with Gyproc® drywall screws of 25mm & 35mm length at minimum spacing of 300mm at centre and 150mm at periphery. 50 mm - shall be placed in metal framework. Insulation holding clip should be used to hold polyfill / synth slab in its position. Finally square and tapered edges of the board are to be jointed and finished to have a flush look which includes filling and finishing with Gyproc® Pro-Fill Jointing compound, Gyproc® Joint Paper tape or Fibre tape. Note: the gypsum board along with the frame work of the partition goes upto bottom of roof slab. Acoustic sealant to be provided at the junction of wall and slab. In case ofMode of measurement upto true ceiling height. Including additional backsupports for TV units/any other installation as required |
| 18 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 19 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) |
| 20 | Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Design Concrete of M30 grade with minimum cement content of 380 kg /cumAll work upto plinth level |
| 21 | Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Design Concrete of M30 grade with minimum cement content of 380 kg /cumAll work above plinth level upto floor V level |
| 22 | Providing and laying in position machine batched and machine mixed design mix M-35 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Concrete of M35 grade with minimum cement content of 400 kg /cumAll work upto plinth level |
| 23 | Providing and laying in position machine batched and machine mixed design mix M-35 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Concrete of M35 grade with minimum cement content of 400 kg /cum |
| 24 | Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete |
| 25 | Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers |
| 26 | Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform |
| 27 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 28 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 29 | Providing and fixing glazing in aluminium doors,windows,ventilator shutters,partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directon of Engineer-in-Charge at all levels,with 12mm thick toughened glass |
| 30 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With 8 mm thickness toughned glass |
| 31 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) |
| 32 | For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 33 | Supplying and fixing sets of levers for locks with follower Studio Classic ,AL silver anod (F150) |
| 34 | Supplying and fixing DEC 6 Plus 6 Pin Euro Profile Double Cylinder withBoth side Key operation Under Master Key System.Total Length = 70mm (35mm+35mm)Change Keys - 3 NosFinish - Nickel Plated |
| 35 | Supplying and fixing door Stop half dome 45 mm dia |
| 36 | Providinng and fixing pair of handle of model TGDIH 450 x 25, Length: 450mm, CTC: 350mm, D - 25mm, SS 316Finish : Satin |
| 37 | Supplying and fixing handle of type NLH 101 Lever Handle with 6621 Roses, 6679 Escutcheons,8mm Spindle with Fixing Screws for door thickness 35-55mm,SS 304, Finish : Satin |
| 38 | Supplying and fixing 3090F2 - WD Size : 4x3x3mm Hinge with Wooden Screws SS304,Finish SSS |
| 39 | Providing and fixing 271a Sash Lock Backset - 55mm, Centre to Centre - 72mm, 20mm Square Forend, Strike plate, SS 304,Finish : SSS |
| 40 | Providing and fixing 278a Dead Lock Backset - 55mm, 20mm Square Forend, Strike plate,SS 304,Finish : SSS. Fire Rated- Escutcheons for Wooden doors to be ordered Separately- Escutcheons and Through bolts for Metal doors to beordered Separately |
| 41 | Providing and fixing handle type TGDID 300x22, CTC - 300mm, D - 22mm, SS 316, Finish : Satin 8 2 |
| 42 | Proving and fixing DORMA HUPPE ACOUSTIC OPERABLE PARTITION –VARIFLEX SOLID 100 (MANUAL) as per the drawing and technical specification required by the Employer. All inclusives of labour material leading. |
| 43 | Providing and fixing silver colour finsh rack and pinion door closer, with std. arm and with two independent closing valves and latching speed adjustable by arm as per EN 1154 aluminium die cast body tubular type universal hydraulic door closer of approved make with necessary accessories and screws etc complete as directed by the Engineer in charge at all levels. |
| 44 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS: 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors including cost of cutting floors, embeding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer -in- Charge.With stainless steel cover plate minimum 1.25 mm thickness |
| 45 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of crosssection 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. |
| 46 | 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge. |
| 47 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Alumini um sheets (each0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. ACP warrenty of 10 Years |
| 48 | Providing and fixing of standard duty hollow metal doors confirming to IS 16074 & IS 4351 made of pressed galvanized steel confirming to IS: 277 with the following specification: Doors shall be with vision glass as a part of complete assembly. Colour of the door unit shall be RAL 7040.a. Door frame shall be single rebate ground profile of size 120 x 60mm made out of minimum 1.15mm (18 gauge) thick galvanized steel sheet. Frames shall be mitered only. Frames shall be field assembled with self-tabs. Bolted & butted joints are not acceptable. All provision should be mortised, drilled and trapped for receiving approximate hardware. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. b. Door leaf shall be 46mm thick fully flush double skin door, with or without vision lite. Door leaf shall be manufactured from minimum 0.8mm (22gauge) thick galvanized steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware of approved make. The infill material shall be Rockwool or resin bonded honeycomb core. The edge should be interlocked with a bending radius of 1.4mm. For pair of doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable should be provided as per manufactures recommendation with a clip-on arrangement. The vision lite wherever applicable should be 5 or 6mm clear toughened glass as per manufactures recommendation with a clip on minimum 50 microns of approved color powder coat finish. |
| 49 | c. Door frames and shutters to have all hardware preparation pre-punched at the factory for flush fixing of hardware at site. Door shutters to be fixed on two frames with fire rated stainless steel double ball bearing butt hinges of dimensions 100 x 75 x 3mm. Double shutters shall have overlapping astragals applied to opposite faces of both shutters. Inactive shutters to be provided with concealed flush bolts of size 250x10mm long along with dust proof socket of approved Make or as approved by engineer in charge.d. The rate shall include the cost and conveyances of all materials, Fasteners, labor charges, lead, lift and necessary hardware like• SS ball bearing hinges of size 100x75x3mm. Minimum 03Nos for 2100mm height. In each panel,• Hydraulic door closer (1 No per each panel).• Door stopper (1 No per each panel) • Mortise sash lock with SS liver handles (1 set for each panel) side key operation• Concealed flush bolt of size 250mmx10mm with dust proof socket are required for double door leaf.complete as directed by the engineer - in- charge at all levels. All SS fixtures shall be of 304 Grade unless otherwise mentioned. All hardware’s shall be provided GEZE brand or equivalent fittingse. Supplying and fixing non fire rated steel door with clear vision panel of size 200x300mm. |
| 50 | Size 1500x2400 mm |
| 51 | Size 1100 x 2400 mm |
| 52 | Size 1800 x 2400 mm |
| 53 | Providing and fixing of standard duty hollow metal doors confirming to IS 16074 & IS 4351 made of pressed galvanized steel confirming to IS: 277 with the following specification: Doors shall be with vision glass as a part of complete assembly. Colour of the door unit shall be RAL 7040.f. Door frame shall be single rebate ground profile of size 120 x 60mm made out of minimum 1.15mm (18 gauge) thick galvanized steel sheet. Frames shall be mitered only. Frames shall be field assembled with self-tabs. Bolted & butted joints are not acceptable. All provision should be mortised, drilled and trapped for receiving approximate hardware. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. g. Door leaf shall be 46mm thick fully flush double skin door, with or without vision lite. Door leaf shall be manufactured from minimum 0.8mm (22gauge) thick galvanized steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware of approved make. The infill material shall be Rockwool or resin bonded honeycomb core. The edge should be interlocked with a bending radius of 1.4mm. For pair of doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable should be provided as per manufactures recommendation with a clip-on arrangement. The vision lite wherever applicable should be 5 or 6mm clear toughened glass as per manufactures recommendation with a clip on minimum 50 microns of approved color powder coat finish. |
| 54 | h. Door frames and shutters to have all hardware preparation pre-punched at the factory for flush fixing of hardware at site. Door shutters to be fixed on two frames with fire rated stainless steel double ball bearing butt hinges of dimensions 100 x 75 x 3mm. Double shutters shall have overlapping astragals applied to opposite faces of both shutters. Inactive shutters to be provided with concealed flush bolts of size 250x10mm long along with dust proof socket of approved Make or as approved by engineer in charge.i. The rate shall include the cost and conveyances of all materials, Fasteners, labor charges, lead, lift and necessary hardware like• SS ball bearing hinges of size 100x75x3mm. Minimum 03Nos for 2100mm height. In each panel,• Hydraulic door closer (1 No per each panel).• Door stopper (1 No per each panel) • Mortise sash lock with Panic Bar key operation• Concealed flush bolt of size 250mmx10mm with dust proof socket are required for double door leaf.complete as directed by the engineer - in- charge at all levels. All SS fixtures shall be of 304 Grade unless otherwise mentioned. All hardware’s shall be provided GEZE brand or equivalent fittingsj. Supplying and fixing non fire rated steel door with clear vision panel of size 200x300mm.Size 1200x2400 mm |
| 55 | Providing and installing counters of MS(with primer and 2 coats of enamel paint) with 18mm thk polished and moulded granite top with all cut outs/openings including providing and fixing over 12mm thk plywood & with laminte lipping all complete of approved quality as per specification and approved drawings(Plan area shall be measured for payment.Steel work shall be paid seperately) |
| 56 | Supply and installation of Carpet tiles suitable for use of soft coverings in both office and retail areas shall be made of tufted cut and loop pile of dimensions 50cm x 50cm of total minimum thickness 6.2mm(+/- 10%). Carpet Pile height shall be 3.5mm +/- 0.5mm. Carpet Pile weight shall be 700gsm +/- 10%. Conforming to the relevant statutory regulations the primary backing shall be made of polyester and secondary backing shall be made of modified bitumen and polyester fleece. The carpet tile shall be hard wearing able to withstand castor chair use with a minimum R value of >/= 2.4. It shall have a dimensional stability of |
| 57 | Providing and fixing 300 mm raised floor system as per below mentioned specification :PANELS : 35mm Thick Access Floor panel of size 600 x 600 mm shall be all steel welded construction with an enclosed bottom pan of hemispherical cones and the top plain sheet is fuse-welded at 144 locations to form a panel. The hollow panels post manufacturing shall be pretreated on an Automated Pre treatment line and further coated with electrostatically deposited epoxy raisin paint 60 - 80 micron thick on all the exposed sides of the panel. Post-coating the hollow core of the panel is injected with a lightweight, fire retardant, non-combustible cementitious compound at high pressure to ensure support of not less than 90% of the top surface area of the panel. The panel is then laminated with floor grade Antistatic Laminate on a semi-automated lamination line to ensure maximum bonding to the steel surface. The edges of the laminated panel should be an Integral trim without beeding.The Panel should have a Low Flange Width of not les than 8.00mm on all four sides and beam width of the panel should not be less than 19.50mm.The panel resting on the pedestal head should have a minimum footprint area of not less than 730.355 sq mm and corner Radius of the panel should not be less than 15.00mm & with reduced cantilever flange edge not less than 19.60mm. |
| 58 | SUB STRUCTURE -PEDESTAL ASSEMBLY : Substructure installed to support the panel shall be suitable to achieve a minimum finished floor height of 300 mm from the existing floor level. Pedestal design shall confirm speedy assembly and removal for relocation and maintenance. The assembly shall provide easy adjustment of levelling and accurately align panels for a maximum ± 25 mm in the vertical direction. Pedestals shall support an axial load without permanent deflection and an ultimate load as laid out in System Performance requirement. The Pedestal head assembly shall consist of embossed head mechanically riveted to a rolled formed stud and 2 check nuts for level adjustment and arresting vertical movement. The pedestal head shall consist of an anti-vibrational conductive cap with inbuilt isolating spacers for Panel and stringer location. The Pedestal Base assembly shall consist of pipe mechanically locked on a press for perpendicularity and then mechanically welded to a base plate with stiffening folds for enhanced strength & excellent grip to glue. The substructure assembly shall be suitably anchored to the floor with suitable adhesive or fastener as recommended by the consultant/manufacturer. All steel components shall be Hot Dip Galvanized. |
| 59 | STRINGERS : The stringer shall be Continuous Box type, hot dipped galvanized steel cold rolled construction for strength, lateral stability, and for enhanced rolling loads performance and to support the panels on all four sides for alignment without leaving any gap at the pedestal head preventing air leakage. The stringer to have countersunk holes at both ends to accommodate bolting of M6 machine screws to the pedestal head assembly.The Panels shall confirm to Class O & Class 1 Fire Ratings tested as per BS 476 Part 6 (Fire Propagation) & 7 (Surface spread of flame) as also ASTM E84 1998 (Flammability) and ASTM E136 (Combustibility ) Electrical Resistivity shall be as per ASTM F150/ NFPA 99 / ANSI S7.1 / CEI 61340 but modified for the surface to ground. To place one electrode on the Access floor Panel surface and to attach the other electrode on the pedestal. Resistanc 1. Conductive range : 2.5x104 – 1x 106 Ohms (surface to ground)e to be tested at 100/500 volts 2. Static dissipative range : 1x106 – 1x109 Ohms (surface to ground) 3. Anti static range : 1x109 – 2x1010 Ohms (surface to surface) |
| 60 | 75 mm dia. Heavy Guage PVC grommets with rotating cover and passage as required for cables in pre-cut openings. The edges of the openings to be properly polished to prevent any injuries etc complete all works at all level in correct line and level as per drawing and as directed by Engineer-in-Charge .The rate is including cost and conveyance of all materials,labour charges for above mentioned work in line and level to the frame work and provision for grommets etc complete as per drawing and as directed by the Engineer-in-Charge at all levels. |
| 61 | Providing and fixing 450 mm raised floor system as per below mentioned specification :PANELS : 35mm Thick Access Floor panel of size 600 x 600 mm shall be all steel welded construction with an enclosed bottom pan of hemispherical cones and the top plain sheet is fuse-welded at 144 locations to form a panel. The hollow panels post manufacturing shall be pretreated on an Automated Pre treatment line and further coated with electrostatically deposited epoxy raisin paint 60 - 80 micron thick on all the exposed sides of the panel. Post-coating the hollow core of the panel is injected with a lightweight, fire retardant, non-combustible cementitious compound at high pressure to ensure support of not less than 90% of the top surface area of the panel. The panel is then laminated with floor grade Antistatic Laminate on a semi-automated lamination line to ensure maximum bonding to the steel surface. The edges of the laminated panel should be an Integral trim without beeding.The Panel should have a Low Flange Width of not les than 8.00mm on all four sides and beam width of the panel should not be less than 19.50mm.The panel resting on the pedestal head should have a minimum footprint area of not less than 730.355 sq mm and corner Radius of the panel should not be less than 15.00mm & with reduced cantilever flange edge not less than 19.60mm. |
| 62 | SUB STRUCTURE -PEDESTAL ASSEMBLY : Substructure installed to support the panel shall be suitable to achieve a minimum finished floor height of 4500 mm from the existing floor level. Pedestal design shall confirm speedy assembly and removal for relocation and maintenance. The assembly shall provide easy adjustment of levelling and accurately align panels for a maximum ± 25 mm in the vertical direction. Pedestals shall support an axial load without permanent deflection and an ultimate load as laid out in System Performance requirement. The Pedestal head assembly shall consist of embossed head mechanically riveted to a rolled formed stud and 2 check nuts for level adjustment and arresting vertical movement. The pedestal head shall consist of an anti-vibrational conductive cap with inbuilt isolating spacers for Panel and stringer location. The Pedestal Base assembly shall consist of pipe mechanically locked on a press for perpendicularity and then mechanically welded to a base plate with stiffening folds for enhanced strength & excellent grip to glue. The substructure assembly shall be suitably anchored to the floor with suitable adhesive or fastener as recommended by the consultant/manufacturer. All steel components shall be Hot Dip Galvanized. |
| 63 | STRINGERS : The stringer shall be Continuous Box type, hot dipped galvanized steel cold rolled construction for strength, lateral stability, and for enhanced rolling loads performance and to support the panels on all four sides for alignment without leaving any gap at the pedestal head preventing air leakage. The stringer to have countersunk holes at both ends to accommodate bolting of M6 machine screws to the pedestal head assembly.The Panels shall confirm to Class O & Class 1 Fire Ratings tested as per BS 476 Part 6 (Fire Propagation) & 7 (Surface spread of flame) as also ASTM E84 1998 (Flammability) and ASTM E136 (Combustibility ) Electrical Resistivity shall be as per ASTM F150/ NFPA 99 / ANSI S7.1 / CEI 61340 but modified for the surface to ground. To place one electrode on the Access floor Panel surface and to attach the other electrode on the pedestal. Resistanc 1. Conductive range : 2.5x104 – 1x 106 Ohms (surface to ground)e to be tested at 100/500 volts 2. Static dissipative range : 1x106 – 1x109 Ohms (surface to ground) 3. Anti static range : 1x109 – 2x1010 Ohms (surface to surface) |
| 64 | 75 mm dia. Heavy Guage PVC grommets with rotating cover and passage as required for cables in pre-cut openings. The edges of the openings to be properly polished to prevent any injuries etc complete all works at all level in correct line and level as per drawing and as directed by Engineer-in-Charge .The rate is including cost and conveyance of all materials,labour charges for above mentioned work in line and level to the frame work and provision for grommets etc complete as per drawing and as directed by the Engineer-in-Charge at all levels. |
| 65 | Providing and laying full body vitrified tile(1200x600) flooring (any shade), 10-12 mm thick with water absorbtion less than 0.08% of first quality confirming to IS:15622 with each tile having abrasion resistance less than 144 cubic mm,breaking strength greater than or equal to 1500N, scratch hardness minimum 6, which is stain resistant and chemical resistant of approved make, shade and pattern laid with cement based high polymer modified quickset adhesive conforming to IS:15477, in minimum 6mm thickness (as per manufactures' specification) having spacers 3mm with spacer filling with resin based epoxy grout with high degree of resistance to chemical attack,abrasion and resistance confirming to British Standards 5980:1980 ,including cost and conveyance of all materials, labour charges,lead, lift, curing, etc, complete and tile protection till handover as directed by Engineer-in-Charge at all levels. The above work shall be carried out by an agency having sufficient experience in flooring and only skilled and experienced persons shall be employed for this purpose. |
| 66 | Providing and laying full body vitrified tile skirting/dadoing (1200x600) mm,10-12mm thick of approved make,shade,and pattern with water absorbtion less than 0.08% of first quality confirming to IS:15622 (2017)with each tile having abrasion resistance minimum PEI III confirming to IS 15622(2017),breaking strength greater than or equal to 1300 N, scratch hardness minimum 5, which is stain,frost resistant resistant and chemical resistant of approved make, shade and pattern laid with cement based high polymer modified quickset adhesive confirming to IS:15477(2017), in minimum 6mm thickness (as per manufactures' specification) having spacers 3mm with spacer filling with resin based epoxy grout with high degree of resistance to chemical attack,abrasion and resistance confirming to British Standards 5980:1980, including cost and conveyance of all materials, labour charges,lead, lift, curing, etc, complete as directed by Engineer-in-Charge at all levels.The rate includes cutting the sharp edges of tiles with specialised machinery wherever required .The above work shall be carried out by an agency having sufficient experience in flooring and only skilled and experienced persons shall be employed for this purpose. |
| 67 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvillinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing,edge moulding etc. all complete as specified and as directed by the Engineer-in-charge. a. Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 68 | Providing and fixing stainless steel (Grade 316) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) |
| 69 | Fixing existing dismantled railing stainless steel (Grade 316) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) |
| 70 | Providing and fixingnon perforated Aluminium powder coated ceiling manufactured of approved colour consisting of panel size 600mm wide x 600mm deep. Aluminium Panels will be powder coated with min 60microns on the exposed surface. Panel to be connected using fasteners to the primary Steel carrier of 30 mm wide x 30 mm high x 2 mm thick with module option of Holes @ 25mm C/C. Primary steel carrier shall be suspended by means of threaded rod at a distance of 1.00 mtr c/c. System Module will be 300mm c/c.as per the architect/engineer in charge specified. The end caps need to be powder coated with wood finish as same as Panel. The system shall be fixed to already erected structural members at maximum 1200mm c/c by means M8 bolts and nuts with washers . |
| 71 | Structural steel work riveted, bolted or welded in built up sections,trusses and framed work including cutting, hoisting, fixing in position and applying two coats of aliphatic acrylic PU paint(DFT 2x35 microns) over one coat of epoxy MIO(Micaceous Iron Oxide) coating intermediate(DFT 100 microns), over one coat of epoxy mastic primer(DFT 100 microns), etc. including cost and conveyance of all materials,labour charges ,lead,lift etc complete as directed by Engineer in Charge at all levels. |
| 72 | Steel work in built up tubular sections YST 310 grade as per IS: 4923 including cutting, hoisting, fixing in position, welded and bolted including special shaped washers etc. complete with electric resistance or induction butt welded tubes including painting with two coats of aliphatic acrylic PU paint(DFT 2x35 microns) over one coat of epoxy MIO(Micaceous Iron Oxide) coating intermediate(DFT 100 microns), over one coat of epoxy mastic primer(DFT 100 microns), etc. closing all the open ends properly with same material cost and conveyance of all materials, labour, etc., complete as directed by the Engineer-in-Charge at all levels. |
| 73 | Providing fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Rockwool conforming to IS:8183, density 75 Kg/m3, 50 mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3mm) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building. |
| 74 | Providing and supplying heavy duty injection adhesive for rebar fixing using Epoxy resin of 330/500ml HILTI HIT-RE 500V3/or equivalent for rebar fixing with 12 mm. Embedment depths of 120mm as mentioned from the Structural consultants, including supplying of two component system consisting of resin and hardener in 3:1 ratio; filling above mentioned mortar with standard dispenser before inserting rebar strictly as per the manufacturers recommendations.The installation and the setting instructions should be strictly followed as per the manufacturers recommendations.The chemical anchor shall carry ETA, COLA and DIBT approval and fire approval. Application can be done in both wet & dry concrete condition, corrosion tested. The chemical shall be having approval to be installed in hammer drill, diamond coring holes , including cost and conveyance of all materials, labour charges,tool rental charges, lead,lift etc complete as directed by Engineer-in-Charge at all levels. |
| 75 | Providing and supplying heavy duty injection adhesive for rebar fixing using Epoxy resin of 330/500ml HILTI HIT-RE 500V3/or equivalent for rebar fixing with 20mm. Embedment depths of 200mm as mentioned from the Structural consultants, including supplying of two component system consisting of resin and hardener in 3:1 ratio; filling above mentioned mortar with standard dispenser before inserting rebar strictly as per the manufacturers recommendations.The installation and the setting instructions should be strictly followed as per the manufacturers recommendations.The chemical anchor shall carry ETA, COLA and DIBT approval and fire approval. Application can be done in both wet & dry concrete condition, corrosion tested. The chemical shall be having approval to be installed in hammer drill, diamond coring holes, including cost and conveyance of all materials, labour charges,tool rental charges, lead,lift etc complete as directed by Engineer-in-Charge at all levels. |
| 76 | Providing and applying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg /sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/ sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry,cost and conveyance of all materials,labour charges,lead,lift etc complete as directed by the Engineer in charge.(The above work shall be carriedout by an agency having sufficient experience in membrane water proofing and should ensure a guarantee of 5 years. Only skilled and experienced persons shall be employed for this purpose.) |
| 77 | Providing and applying 2 coats an acrylic polymer modified elastomeric cementitious water proof coating on roof slab , gutter ,OHT,SUMP etc which shall be mixed as per manufacture's technical specification, after thoroughly cleaning the surface by mechanical means to making it free of any loose mortar,unsound substrate,\\"V\\" grooves cut along the construction joints, cracks and joints of slab/wall on the external face and the same shall be filled with polymermodified mortar( CM 1:3 mixed with approved water proofing compound in the proportion recommended by the manufacturers), cracks in the slab (if any), pressure grouting wherever necessary by injecting mixed with approved expanding agent using pressure grouting pump with a pressure of 3 to 4kg/sqm ,strictly maintaining the coverage specified by the manufacturer, including cost and conveyance of all materials,labour charges etc complete as directed by the Engineerin- Charge .(The above work shall be carriedout by an agency having sufficient experience in membrane water proofing and should ensure a guarantee of 5 years. .Only skilled and experienced persons shall be employed for this purpose.) |
| 78 | Decorative and Privacy Frosted film for window glass suitable for glazing and window graphics and architectural signage shall be provided having a visual frosted effect shall be provided on vertical glass face in the locations as indicated in the drawings. The film shall have a minimum thickness of 80 micron cast vinyl film with frosted glass appearance. The film shall be self-adhesive which shall be of permanent acrylic. The backing shall be one side coated bleached Kraft paper of 140gsm. It shall have an outdoor and indoor application life of up to 7 years for use on outside and inside the external windows respectively. It shall have an indoor application life of 9 years on internal glass partitions and windows. The film shall be hard wearing and possess good dimensional stability, excellent adhesion and excellent UV, temperature, humidity and salt spray resistance.Size – Shall be provided for an area (Overall Length) x 2.4mColour & Graphics – Colour and Web Graphics as per Employer’s design |
| 79 | Providing and fixing PVC Vinyl flooring of thickness minimum 1 mm on the floor pasting with proper adhesive after cleaning the floor compltely from the dest.Contractor to ensure provision to be provided for any service on floor. Design and colour of the material as per the Employer's reqirement. |
| 80 | Room SignageProviding and fixing rooms signages using brush finish Aluminium Composite Panel(ACP) with overall thickness of 3mm comprising of 0.25mm thick aluminium foil on both sides.Size of signages shall be 400mmx100mm.Artwork shall be made of LG solid colour Vinyl sheet fixed with 3M double sided clear tape. Font size :Person name and Room names are to be 30mm & Designation to be 20mm, Font : Calibri |
| 81 | Evacaution SignageProvidinf and fixing evacuation signage plan of size 450mmx600mm complete with design and high resolution printing and sandwiched between 4mmm thk white acrylic on both sides with neat bevelled edges.Contents are to be printed on photo luminescent Vinyl printing to be done with HP latex.Final covering with Mat Lamination fixed with 3M double sided tape and SS 24mm mirror screws |
| 82 | Fire ExitProviding and Fixing the Fire Exit Signage's of size 300mm x 100mm made up of Rigid integral PVC Cladded with Photo luminescent (Glow in Dark) material with computer cut vinyl lettering on it. Double sided and Single sided fixed with SS screws |
| 83 | LOGO:KMRL LOGO of size 1000mm x 400mm made with brush finished 1.2mm solid stainless steel sheet with 3D projections of 40mm made of brush finished 1.2mm solid stainless steel sheetLetter: KOCHI WATER METRO LIMITED of size 140mm ht x 2750mm wide made with brush finished 1.2mm solid stainless steel sheet with 3D projections of 40mm made of brush finished 1.2mm solid stainless steel sheet |
| 84 | Providing and fixing -illuminated signs including all operations from fabrication to installation all complete as per relevant drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in-Charge.>>LogoProviding and fixing Logo mounted on Sinage structure MS square box100x100x5mm welded to base plate anchored toterrace floor level / fixed to ceiling side, made out of 3 mm thick Aluminium sheet white color(as specified) folded to required size and shape as per drawing and fixing to Wall. The Front facia to be made out of 8mm thick Acrylic (Milky White 040) with Transluscent Vinyl as per Pantone shade to be pased on front surface of Acrylic. Providing the LED lighting insice the 3D Logo with proper illunination, and providing all the necessay Power controls, Wiring etc. All corners and hairline joints of sign face shall be finished and filled neat wigh white/clear silicon sealent. Cost includes all the necessary arrangement like templates, props, scaffolding, and parfect alignment and placement of the sign as specified and approved by the Engineer-incharge.Name Panel LettersProviding and fixing 3D Channel letter Sinage structure MS square box100x100x5mm welded to base plate anchored toterrace floor level / fixed to ceiling side, made out of 3 mm thick Aluminium sheet white color(as specified) folded to required size and shape as per drawing and fixing to Wall. The Front facia to be made out of 8mm thick Acrylic(Milky White 040) with Transluscent Vinyl as per Pantone shade to be pased on front surface of Acrylic. Providing the LED lighting insice the 3D Channel Letters with proper illunination, and providing all the necessay Power controls, Wiring etc. All corners and hairline joints of sign face shall be finished and filled neat wigh white/clear silicon sealent. Cost includes all the necessary arrangement like templates,props, scaffolding, and parfect alignment and placement of the sign as specified and approved by the Engineer-in-charge.Accessories: Providing and fixing all accessories such as nut-inserts, screws , rivets, bolts, washers, nuts, etc.Sign Mounting : The 3D Channel Letters should be fixed on the MS Box Structure, which is to be fixed on Ceiling/roof frame work /roof beam/pelmet/ pedastal and foundation with expansion Bolts(Hilty) and necessary support work . Overhead station name (OPERATION and CONTROL CENTRE) signages are mounted with ACP cladding and frame. Complete mounting including PU painted to match GreyG2 of approved make and duly approved by Engineer-in-Charge(REFER Corresponding drawing for location), Including staging, shuttering etc complete as per the instruction of engineer - in - charge.LED module : Rishang 1.2 W 3 lens LED module of 5 year warranty from the date of purchase, Drive ADS indoor & outdoor steek drive with 5 warrenty from the date of purchace. ACP of 10 year Warrenty |
| 85 | Providing & fixing 6 mm thick (exterior grade) cement fibre board panels in required profile over existing wall / Aluminium framework to a height up to 10 m using brass crews and additional adhesive for extra caution . (Aluminium framework will be measured and paid separately under relevant items) . Cement fibre board shall be finished with 2 or more coats of emulsion paint of approved shade over 2 coats of cement primer . Screw heads shall match the same finish and colour of the board with putty and paint /powder coating. The rate shall include cost and conveyance of all materials ,labour,scaffolding ,lead ,lift etc complete at all levels as directed by the Engineer- in-Charge .(Painting will be measured and paid separately under relevant items) |
| 86 | Providing and fixing wooden polymer composite Baffle ceiling at all levels.Works includes taking supports from the existing celing for supporting the metal keel to fix baffle tube with required pattern. SS Suspension road of 10 mm should be provide with 1500 c/c with anchor fasterns, metal keel connected with suspension rod with baffle clip. The baffle tube connected to the metal keel with required design and pattern. |
| 87 | Supply and installation of File compactor of 3 unit set. Rate inclusing of all material, fixing and leading in charge. The details as per drawing and technical specification as approved by Engineer. |
| 88 | Floor polishing on existing Vitrified tile including all cost of machinery & consumables. |
| 89 | Providing corrugate G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete ( up to any pitch in horizontal / vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.1.00 mm thick with zinc coating not less than 275 gm/m2 |
| 90 | Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shadeArea of slab over 0.50 sqm |
| 91 | Works at Vyttila terminal |
| 92 | Demolishing brick/solid block work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar |
| 93 | Providing and laying autoclaved aerated cement blocks masonry with AAC blocks in super structure above floor 2 level up to floorV level in cement mortar 1:4 (1 cement :4 coarse sand). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work. |
| 94 | 12 mm cement plaster finished with a floating coat of neat cement of mix:1:4 ( 1 cement : 4 fine sand) |
| 95 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 96 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer |
| 97 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 98 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.Concrete of M30 grade with minimum cement content of 350 kg /cumAll work above plinth level upto floor V level |
| 99 | Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers |
| 100 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 101 | Providing and fixing of standard duty hollow metal doors confirming to IS 16074 & IS 4351 made of pressed galvanized steel confirming to IS: 277 with the following specification: Doors shall be with vision glass as a part of complete assembly. Colour of the door unit shall be RAL 7040.f. Door frame shall be single rebate ground profile of size 120 x 60mm made out of minimum 1.15mm (18 gauge) thick galvanized steel sheet. Frames shall be mitered only. Frames shall be field assembled with self-tabs. Bolted & butted joints are not acceptable. All provision should be mortised, drilled and trapped for receiving approximate hardware. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. g. Door leaf shall be 46mm thick fully flush double skin door, with or without vision lite. Door leaf shall be manufactured from minimum 0.8mm (22gauge) thick galvanized steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware of approved make. The infill material shall be Rockwool or resin bonded honeycomb core. The edge should be interlocked with a bending radius of 1.4mm. For pair of doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable should be provided as per manufactures recommendation with a clip-on arrangement. The vision lite wherever applicable should be 5 or 6mm clear toughened glass as per manufactures recommendation with a clip on minimum 50 microns of approved color powder coat finish. |
| 102 | h. Door frames and shutters to have all hardware preparation pre-punched at the factory for flush fixing of hardware at site. Door shutters to be fixed on two frames with fire rated stainless steel double ball bearing butt hinges of dimensions 100 x 75 x 3mm. Double shutters shall have overlapping astragals applied to opposite faces of both shutters. Inactive shutters to be provided with concealed flush bolts of size 250x10mm long along with dust proof socket of approved Make or as approved by engineer in charge.i. The rate shall include the cost and conveyances of all materials, Fasteners, labor charges, lead, lift and necessary hardware like• SS ball bearing hinges of size 100x75x3mm. Minimum 03Nos for 2100mm height. In each panel,• Hydraulic door closer (1 No per each panel).• Door stopper (1 No per each panel) • Mortise sash lock with Panic Bar key operation• Concealed flush bolt of size 250mmx10mm with dust proof socket are required for double door leaf.complete as directed by the engineer - in- charge at all levels. All SS fixtures shall be of 304 Grade unless otherwise mentioned. All hardware’s shall be provided GEZE brand or equivalent fittingsj. Supplying and fixing non fire rated steel door with clear vision panel of size 200x300mm. |
| 103 | Size 1200x2100 mm |
| 104 | Size 1500x2400 mm |
| 105 | 500 kVA 11kV Unitised Substation(outdoor IP54)Design, fabrication,Supply, installation, testing and commissioning of outdoor type Unitized Substation enclosure consisting of 11 KV, 800A, 26.3kA for 3 sec VCB with fully encapsulated vacuum interrupter panel , 500 kVA, 11kV/433V 3 Ph, 50 Hz, vector Dyn -11, dry type, Transformer with IP54 enclosure, winding temperature alarm and trip on transformer compartment and LV chamber suitable for termination of cable, complete with all standard fittings and accessories etc including necessary louvers and as per specifications attached in all respects as required. It shall includes all necessary control cabling for alarm, tripping & indication, all internal cabling as required. The rate shall be inclusive of all materials, lead, lift etc. complete as per single line diagram & technical specification.HT Compartment:11KV, 26.3kA for 3 sec, 800A motorised VCB, 800 Amp continously rated Cu busbar Self powered microprocessor based three over current and one earth fault relay with protection CT's - 1 setMaster trip relay, winding temperature relay and all accessories complete as required, Power pack - 1 set, Provision for padlocking for open, close, earth and test position, Enclosure with Bidirectional Trivector meter with 0.2 class PT and CT-1NoTransformer Compartment: 500 kVA, 11kV/433V 3 Ph, 50Hz, dry type, vector Dyn -11 Transformer, copper wound, Class F insulation, indoor distribution Transformer with forced ventilation. Losses shall be as per ECBC guidlines amended upto date. The transformer shall have Delta on HV side and Star on LV side with off load tap changer range: + 5% to -10% in steps of 2.5%. The transformer shall have suitable enclosure for providing neutral CT of 100/5A 15VA 5P10 on earthed star point with connector for connection Earth Fault relay in HT/LT panel as per SLDLV Chamber: Suitable for termination of LT cable. 1000A, FP ACB 50kA Thermal-magnetic based- 1 Nos. Foundation for the panel shall be measured and paid seperately. |
| 106 | OCC LT Main Panel: Supply, Installation, Testing & Commissioning of Panel, cubicle type,Top entry, totally enclosed, IP54 form 4b, free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for 3 phase , 415 V, 50Hz AC system with busbars , internal wiring,etc., including following components as per drawing and technical specifications.Incomer & Bus Coupler: 1000A, TPN ACB 50kA Microprocessor based, RS 485- 3 No, Instruments(incomer): AMF Relay-1No, 4A MCB - 3 Nos, RYB indication lamp, LED type - 1 set, ON-OFF-TRIP indicator -1set, Digital Multi function meter with Acc Cl1 with RS485-1no, (0-500)V voltmeter, Acc. class 1 with 90 deg defl. scale - 1 Nos, (0-600)A ammeter Acc. class 1 with 90 deg defl. scale - 3 Nos, 600/5A 15VA class 1 resin cast CT -1set, 6A 3 pole voltmeter selector switch - 1No, Surge Protection Devices Class B & Class C- 1 setBusbar: 1000A,50kA TPN busbar chamber with copper busbarOutgoings:MCCB with adjustable thermal magnetic release with OL & SC protection, with RS 485.40A,TP+NL, 50kA- 5No, 100A,TP+NL, 50kA, - 4Nos, 125A,TP+NL, 50kA, - 2Nos, 350A,TP+NL, 50kA, - 2NosInstruments(outgoing):ON-OFF-TRIP indicator-13 set, 4A MCB - 13 Nos, 3phase digital kwh meter Acc Cl 1 and having RS485 - 13no, 40/5A 15VA Class 1 resin cast CT-5 set, 100/5A 15VA class 1 resin cast CT-4set, 125/5A 15VA class 0.5 resin cast CT-2set,350/5A 15VA class 0.5 resin cast CT-2set |
| 107 | AC PANEL-OCC: Supply, Installation, Testing & Commissioning of AC-Panel-OCC, cubicle type,Top entry, totally enclosed, IP54 form 4b, free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for 3 phase , 415 V, 50Hz AC system with busbars , internal wiring,etc., including following components as per drawing and technical specifications.Incomer: 250A, TPN MCCB 50kA Thermal-magnetic based, RS 485- 1 No, Instruments(incomer):4A MCB - 3 Nos, RYB indication lamp, LED type - 1 set, ON-OFF-TRIP indicator -1set, Digital Multi function meter with Acc Cl1 with RS485-1no, (0-500)V voltmeter, Acc. class 1 with 90 deg defl. scale - 1 Nos, (0-250)A ammeter Acc. class 1 with 90 deg defl. scale - 3 Nos, 250/5A 15VA class 1 resin cast CT -1set, 6A 3 pole voltmeter selector switch - 1No.Busbar: 250A,50kA TPN busbar chamber with Aluminium busbarOutgoings:MCCB with adjustable thermal magnetic release with OL & SC protection, with RS 485.100A,TP+NL, 50kA- 2No.,63A,TP+NL, 50kA- 5No.Instruments(outgoing): ON-OFF-TRIP indicator-7set, 4A MCB - 7 Nos. |
| 108 | Shifting, Installation, Testing and Commissioning of 40kVA (2x40KVA) with 40KVA Servo Voltage stabilizer, three phase input, Three Phase output, true on-line UPS system with 1hr back up at full load, output isolation transformer, including all accessories, SMF batteries VRLA type with powder coated CRCA cabinet including all accessories such as output panel required for ups parellel operation, cabling etc as required complete having following specification.The UPS system consist of two numbers of UPS unit and two set of battery bank . The UPS shall be suitable for parellel operation.Fully digital controlled based on DSPPower factor corrected from end > 0.9Pure sine wave output.Full time output voltage & frequency regulationAuto regulation of battery end voltageIntelligent interface with LED/LCD displayStatic bypass switch / manual by pass switchAuto temperature compensation, Remote Management Interphase (Shit |
| 109 | Supply, installation, Testing & commisioning of 40kVA(2x40kVA) with Lithium battery bank as per the technical specifictaion & drawing and as instructed by Engineer in Charge. |
| 110 | Shifting, Installation, Testing and Commissioning of 400 kVA prime rated D.G Set with acoustic enclosure and Control panel ,protection and digital metering,controls and interlocks, CTs and transducers for all metering and protection and suitable FP MCCB etc. , including antivibration mountings, exhaust silencer and exhaust pipe conforming to latest environment protection regulations for emission and noise levels complete with , water/ coolant cooled, (radiator type) four stroke, electric start conforming to BS: 5514 400 kVA prime rating, brushless, self excited, self regulated and suitable for continuous operation at 1500rpm, generating 415 V+/-5% Volts at 0.8 p.f (lag), 50Hz,3 phase, 4 wire system generally conforming to BS: 2613 & IS: 4722. Both Engine and Alternator shall be mounted on common channel iron base frame, and with standard accessories such as lead acid batteries and engine driven battery charger along with leads,battery stand, necessary control wiring with control cables, first fill of lubricating oil, and earthing as per standards Fuel tank for 8 hours suitable continous ooperation, fuel piping from fuel tank to Engine, Residential silencer, suitable size Cable termination box with extended Alternator terminal with bus bars etc as required and as per specifications.Rate shall be inclusive of all the civil work including RCC foundation. The work should be as per Electrical Inspectorate/ Central Pollution control board standards applicable at the time of delivery.All works as per specification & scope of work and advised by the Engineer |
| 111 | Shifting, Installation, Testing and Commissioning of 160 kVA prime rated D.G Set with acoustic enclosure and Control panel ,protection and digital metering,controls and interlocks, CTs and transducers for all metering and protection and suitable FP MCCB etc. , including antivibration mountings, exhaust silencer and exhaust pipe conforming to latest environment protection regulations for emission and noise levels complete with , water/ coolant cooled, (radiator type) four stroke, electric start conforming to BS: 5514 400 kVA prime rating, brushless, self excited, self regulated and suitable for continuous operation at 1500rpm, generating 415 V+/-5% Volts at 0.8 p.f (lag), 50Hz,3 phase, 4 wire system generally conforming to BS: 2613 & IS: 4722. Both Engine and Alternator shall be mounted on common channel iron base frame, and with standard accessories such as lead acid batteries and engine driven battery charger along with leads,battery stand, necessary control wiring with control cables, first fill of lubricating oil, and earthing as per standards Fuel tank for 8 hours suitable continous ooperation, fuel piping from fuel tank to Engine, Residential silencer, suitable size Cable termination box with extended Alternator terminal with bus bars etc as required and as per specifications.Rate shall be inclusive of all the civil work including RCC foundation. The work should be as per Electrical Inspectorate/ Central Pollution control board standards applicable at the time of delivery. All works as per specification & scope of work and advised by the Engineer |
| 112 | DG Panel Supply, Installation, Testing & Commissioning of DG panel,cubicle type,totally enclosed,top entry, IP 65 form 4b, free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3ph, 415V, 50Hz AC system with busbars, including internal wiring with suitable size wires/cable, interconnection, duly powder coated etc., including following components as per drawing and technical specifications.Incomer: 800A, TPN MCCB 50kA Thermal-magnetic based, RS485 communication facility- 1No,Instruments(incomer): 4A MCB - 3 nos, RYB indication lamp, LED type - 1set, ON-OFF-TRIP indicator -1set, Digital Multi function meter with Acc Cl-1 with RS485 communication - 1no, (0-500)V voltmeter, Acc. class 1 with 90 deg defl. scale -1Nos, (0-320)A ammeter Acc. class 1 with 90 deg defl. scale - 3Nos, 320/5A 10VA class 1 resin cast CT -1set, 6A 3 pole voltmeter selector switch - 1No.Busbar: 800A ,50kA TPN busbar chamber with Aluminium busbarOutgoings:MCCB of following rating with adjustable thermal magnetic release with OL & SC protection, with RS 485 communication facility. 200A,TP+NL,36kA- 1No,100A,TP+NL, 36kA-1Nos, 63 A,TP+NL, 36kA - 3Nos.Instruments (Outgoing):200/5A 15VA class 1 resin cast CT -1set, 100/5A 15VA class 1 resin cast CT -1set, 63/5A 15VA class 1 resin cast CT -2set, Three phase digital kwh meter Acc Cl-1 and having RS485communication -3nos, Three phase digital TOD meter Acc Cl-1 and having RS485 communication -1nos, RYB indicator-4set, ON-OFF-TRIP indicator -4 set |
| 113 | APFC PANELSupply, Installation, Testing and Commissioning of totally enclosed, top/bottom entry, free standing, floor mounting, dust and vermin proof,form 3 b construction, cubicle type capacitor panel board of total 25 KVAR capacity to be fabricated out of 2mm thick CRCA sheet steel Powder coated with provision for capacitor mounted inside the panel with adequate number of louvers and powder coated with approved shade and having following specific componentsIncomer:63A, FP MCCB 36kA Thermal-magnetic based, RS 485 communication facility- 1NoInstruments(incomer):4A MCB - 3 nos, RYB indication lamp, LED type - 1 set, Digital Multi function meter with Acc Cl-1 with RS485 communication-1no, (0-500)V voltmeter, Acc. class 1 with 90 deg defl. scale -1Nos,(0-63)A ammeter Acc. class 1 with 90 deg defl. scale - 3Nos, 63/5A 15VA class 1 resin cast CT-1set, 6A 3 pole voltmeter selector switch - 1No, Auto/Manual Selector Switch-1 Set, Microprocessor based intelligent, 6 step IPFC relay with PF display - 1 No.Busbar:100A ,50kA TPN busbar chamber with Aluminium busbarOutgoings32A,TP+NL, 36kA, MCCB with adjustable thermal magnetic release with OL&SC protection, with RS485 communication facility-5NosInstruments (Outgoing):RYB indicator -5 set, ON-OFF-TRIP indicator -5 set10kVAr capacitor duty contactor(AC6B) with illuminated ON- OFF push buttons (LED type)- 1No5kVAr capacitor duty contactor(AC6B) with illuminated ON- OFF push buttons (LED type)- 3Nos10kVAr,415 V,50 Hz heavy duty dry type capacitor(APP-H) with 7 %Series reactor- 1No5kVAr,415 V,50 Hz heavy duty dry type capacitor(APP-H) with 7 %Series reactor- 3Nos |
| 114 | Supply of following sizes of XLPE insulated PVC sheathed, FRLS earthed Aluminium conductor armoured power cable of 11 KV grade conforming to IS 7098 amended upto date.3C X 300 sq.mm. |
| 115 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 120 sq. mm and upto 400 sq. mm |
| 116 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Above 120 sq. mm and upto 400 sq. mm |
| 117 | Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required3C X 300sq.mm. |
| 118 | Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required:3C X300sq.mm. |
| 119 | Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, FRLS armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date. |
| 120 | 3.5C 300 Sq. mm Al |
| 121 | 3.5C 240 Sq. mm Al |
| 122 | 3.5C 185 Sq. mm Al |
| 123 | 3.5C 120 Sq. mm Al |
| 124 | 3.5C 70 Sq. mm Al |
| 125 | 3.5C 35 Sq.mm Al |
| 126 | 4C 16 Sq.mm Al |
| 127 | 3.5C 25 Sq.mm Cu |
| 128 | 4C 10 Sq.mm Cu |
| 129 | 4C 6 Sq.mm Cu |
| 130 | 4C 4 Sq.mm Cu |
| 131 | 4C 2.5 Sq.mm Cu |
| 132 | 3C 4 Sq.mm Cu |
| 133 | 3C 2.5 Sq.mm Cu |
| 134 | 2C 4 Sq.mm Cu |
| 135 | Supplying and making end termination with brass compression gland and aluminium/Copper lugs for following size of XLPE insulated PVC sheathed aluminium/copper conductor cable of 1.1 kV grade as required. |
| 136 | 3.5C 300 Sq. mm Al |
| 137 | 3.5C 240 Sq. mm Al |
| 138 | 3.5C 185 Sq. mm Al |
| 139 | 3.5C 120 Sq. mm Al |
| 140 | 3.5C 70 Sq. mm Al |
| 141 | 3.5C 35 Sq.mm Al |
| 142 | 4C 16 Sq.mm Al |
| 143 | Supplying and making end termination with brass compression gland and aluminium/Copper lugs for following size of XLPE insulated PVC sheathed aluminium/copper conductor cable of 1.1 kV grade as required. |
| 144 | 3.5C 25 Sq.mm Cu |
| 145 | 4C 10 Sq.mm Cu |
| 146 | 4C 6 Sq.mm Cu |
| 147 | 4C 4 Sq.mm Cu |
| 148 | 4C 2.5 Sq.mm Cu |
| 149 | 3C 4 Sq.mm Cu |
| 150 | 3C 2.5 sq.mm Cu |
| 151 | 2C 4 Sq.mm Cu |
| 152 | Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size on wall surface as required. |
| 153 | Cable size upto 35sq mm |
| 154 | Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp) |
| 155 | Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp) |
| 156 | Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp) |
| 157 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. |
| 158 | Cable size upto 35sq mm |
| 159 | Above 35 sq.mm upto 95 sq.mm |
| 160 | Above 95 sq. mm and upto 185 sq. mm |
| 161 | Above 185 sq. mm and upto 400 sq. mm |
| 162 | Laying of one number additional PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required. |
| 163 | Cable size upto 35sq mm |
| 164 | Above 35 sq.mm upto 95 sq.mm |
| 165 | Above 95 sq. mm and upto 185 sq. mm |
| 166 | Above 185 sq. mm and upto 400 sq. mm |
| 167 | Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size on cable tray as required. |
| 168 | Upto 35 sq. mm (clamped with 1mm thick saddle) |
| 169 | Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp) |
| 170 | Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp) |
| 171 | Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp) |
| 172 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. |
| 173 | Cable size upto 35sq mm |
| 174 | Above 35 sq.mm upto 95 sq.mm |
| 175 | Above 95 sq. mm and upto 185 sq. mm |
| 176 | Above 185 sq. mm and upto 400 sq. mm |
| 177 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. |
| 178 | Upto 35 sq. mm |
| 179 | Above 35 sq. mm and upto 95 sq. mm |
| 180 | Above 95 sq. mm and upto 185 sq. mm |
| 181 | Above 185 sq. mm and upto 400 sq. mm |
| 182 | Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required |
| 183 | 50 mm |
| 184 | 100 mm |
| 185 | Providing, laying and fixing following dia RCC pipe NP 2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc. as required. |
| 186 | 100 mm dia |
| 187 | 150 mm dia |
| 188 | 250 mm dia |
| 189 | Supply of ISI marked HDPE pipes with following size of 10 kgf/cm2 conforming to as per IS 4984,1985 PE-100 including all fittings and specials such as tees, elbows, bends, reducers, end caps,complete so as to withstand the internal design pressure of 10 fkg/cm2 as directed by Engineer -in-Charge. |
| 190 | 63 mm dia (OD) |
| 191 | 120 mm dia (OD) |
| 192 | Laying, jointing and hydrostatically testing ISI marked HDPE pipes with following size of 10 kgf/cm2 conforming to as per IS 4984,1985 PE-100 with saddles, plugs,coupling, MTA etc.including cost of all jointing materials, bolts, nuts, rubber washers, ferrule, pipe supports, hire of tools, cutting and finishing of HDPE pipe at every 20 mtr spacing near street light pole in the elevated bridge etc.as required. a)63 mm dia (OD), b)120 mm dia (OD) |
| 193 | Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. |
| 194 | 150 mm width X 50 mm depth X 1.6 mm thickness |
| 195 | 300 mm width X 62.5 mm depth X 2.0 mm thickness |
| 196 | Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray “bends” (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. |
| 197 | 150 mm width X 50 mm depth X 1.6 mm thickness |
| 198 | 300 mm width X 62.5 mm depth X 2.0 mm thickness |
| 199 | Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray “Tee” (galvanisation not less than 50microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required |
| 200 | 150 mm width X 50 mm depth X 1.6 mm thickness |
| 201 | 300 mm width X 62.5 mm depth X 2.0 mm thickness |
| 202 | Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray “Cross members” (galvanisation not less than 50microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required |
| 203 | 150 mm width X 50 mm depth X 1.6 mm thickness |
| 204 | 300 mm width X 62.5 mm depth X 2.0 mm thickness |
| 205 | Supplying and installing following size of perforated Hot DippedGalvanised Iron cable tray “REDUCERS” (galvanisation not less than 50microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required |
| 206 | 150 mm width X 50 mm depth X 1.6 mm thickness |
| 207 | 300 mm width X 62.5 mm depth X 2.0 mm thickness |
| 208 | Supply, fabricating and installing MS items such as Tees/ angles/ channels etc. on floor/ ceiling/ wall including necessary civil work such as grouting, finishing etc. and painting with two coats of zinc chromate primer and two coats of enamel paint of approved make. |
| 209 | Supply & fixing of 100 x 38 x 1.6 mm 2 compartment GI under floor trunking made out of 1.6mm pre-galvanised sheet metal with zinc coated steel sheet double folded and arc welded including all accessoires like jointing sleeve,vertical and horizontal bends, end cover etc required for the complete installation of the trunking system including cutting the floor if required and making good the same as required. |
| 210 | 100x38X1.6 mm 2 compartment GI under floor trunking |
| 211 | Jointing sleeve suitable for 100x38x1.6 mm 2 compartment GI underfloor trunking |
| 212 | Junction box of size 100x100X65 mm |
| 213 | Supply & fixing of 225 x 38 x 1.6 mm 2 compartment GI under floor trunking made out of 1.6mm pre-galvanised sheet metal with zinc coated steel sheet double folded and arc welded including all accessoires like jointing sleeve,vertical and horizontal bends, end cover etc required for the complete installation of the trunking system including cutting the floor if required and making good the same as required. |
| 214 | 225x38X1.6 mm 2 compartment GI under floor trunking |
| 215 | Jointing sleeve suitable for 225x38x1.6 mm 2 compartment GI underfloor trunking |
| 216 | Junction box of size 225x225X65 mm |
| 217 | Supply & fixing of 300 x 38 x 1.6 mm 2 compartment GI under floor trunking made out of 1.6mm pre-galvanised sheet metal with zinc coated steel sheet double folded and arc welded including all accessoires like jointing sleeve,vertical and horizontal bends, end cover etc required for the complete installation of the trunking system including cutting the floor if required and making good the same as required. |
| 218 | 300x38X1.6 mm 2 compartment GI under floor trunking |
| 219 | Jointing sleeve suitable for 300x38x1.6 mm 2 compartment GI underfloor trunking |
| 220 | Junction box of size 300x300X65 mm |
| 221 | Providing & fixing Fire Barrier mortar with minimum 2 hours fire rating when tested in accordance with BS 476 part 20 and UL 1479 for horizontal openings in fire rated floors or slabs and vertical openings in walls for passing service shafts. The service lines could be of various types like electrical cables trays, metal pipes, GI Ducts for AC, etc.The mortar shall have minimum hardened density of 0.8 g/cm3 and It should have a compressive strength of 2.9N/Sq mm . The product shall be Smoke & Air Seal and 30 years Age tested as per Dafstb and DIBT standards. The product shall be tested and approved by third party agencies such as UL and FM. The mortar should be tested in accordance with IEC 60068-2-57:1999-11 (Environmental Testing) as per Part 2-57: Test for Vibration-Time-history method and VERTEQII for seismic zone 4. The product shall bear the UL and FM approval logo on the packing where applicable. |
| 222 | Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required. |
| 223 | Supply & Fxing of Steel sections/frame work as support for fixing the cable tray including cutting hoisting, fixing in position by rivetted/bolted/welded and applying two coats of aliphatic acrylic PU paint(DFT 2x35 microns) over one coat of epoxy MIO(Micaceous Iron Oxide) coating intermediate(DFT 100 microns), over one coat of epoxy mastic primer(DFT 100 microns), etc. including cost and conveyance of all materials, labour, lead,lift etc. complete as directed by Engineer- in-Charge at all levels. |
| 224 | Supply & fixing Computer points with 3 nos 3 pin 5/6A socket with 2no.5/6A switch with modular front plate and cover on surface/recess, including proving and fixing suitable size GI boxs, its interconnections etc as required complete. (Note: 2 nos 5/6A socket fixed at 60cm above FFL and 2 nos 6A switch with 1no 5/6A socket at 1m above FFL) |
| 225 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.(Group C) |
| 226 | Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.. (Note:The total distance from the DB/switch box to the point will not exceed 5mtr, incase if length increases above 5 metres, the wiring shall be measured under item Circuit wiring) |
| 227 | Group controlled light point with 1.5 sq. mm wire - Wiring for Group controlled light point (from one point to another point) with 3X 1.5 sq. mm PVC insulated, (FRLS), copper conductor cable in surface/recessed mounted rigid medium class 20mm PVC conduit with all accessories as required.. The total distance from one point to another point will not exceed 5meters. In case if the total length increases 5meters. The distance from DB to 1st point will be measured under item point wiring.(Group C) |
| 228 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required |
| 229 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 230 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 231 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 232 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 233 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings). |
| 234 | Supplying and fixing following modular switch/ socket with modular plate & cover on surface or in recess, including proving and fixing suitable size GI box,inter connection etc as required complete. |
| 235 | 6 pin 15/16 amp socket outlet |
| 236 | 15/16 amp switch |
| 237 | Bell push |
| 238 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required. |
| 239 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 240 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 241 | 20 mm |
| 242 | 25 mm |
| 243 | 32 mm |
| 244 | Supplying and fixing following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 160 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB’s, with provision of 125/160 amps TP 16 KA MCCB as incomer, interconnection between incomer MCCB and bus bars (but without MCB’s/ MCCB) as required . (Note :Vertical type MCB TPDB is normally used where 3 phase outlets are required.) |
| 245 | 8 Way |
| 246 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required. |
| 247 | 8 way (8+24), Double door |
| 248 | 6 way (8+18), Double door |
| 249 | 4 way (8+12), Double door |
| 250 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). |
| 251 | 8 way, Double door |
| 252 | 6 way, Double door |
| 253 | 4 way, Double door |
| 254 | Supplying and fixing following way,Transparent Lid, flexi distribution board, 415 volts, on surface/ recess, complete with neccessary earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)4 Row 48Modules (4X12 Module). Make:-L&T DBROW228GD or Legrand 5077 11 or equivalent approved make |
| 255 | Supply and fixing of following rating residual current circuit breaker with MCB having earth leakage and overload protection (RCCB+MCB) as per specification as required |
| 256 | 4 pole 63 amps. (415 Volts)100mA sensitivity. |
| 257 | 4 pole 63 amps. (415 Volts),30mA sensitivity. |
| 258 | 4 pole 40 amps. (415 Volts),100mA sensitivity. |
| 259 | 4 pole 32 amps. (415 Volts),30mA sensitivity. |
| 260 | 4 pole 25 amps. (415 Volts),100mA sensitivity. |
| 261 | 2 pole32 amps. (230 Volts),30mA sensitivity. |
| 262 | 2 pole 25 amps. (230 Volts),30mA sensitivity. |
| 263 | Supply and fixing of following rating, 10 KA, Miniature Circuit Breakers as required. |
| 264 | 40A to 63A TP MCB, C-CURVE |
| 265 | 6 A to 32 A SP MCB, C-CURVE |
| 266 | 40A to 63A TP MCB, D-CURVE |
| 267 | 6 A to 32 A TP MCB, D-CURVE |
| 268 | Supply and fixing of following rating, 10 KA, Miniature Circuit Breakers as required. |
| 269 | 6A to 32A, SP, B/C-CURVE |
| 270 | 6 A to 32 A TP MCB, C-CURVE |
| 271 | Providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. |
| 272 | 125A TP MCCB 16kA |
| 273 | 100A TP MCCB 16kA |
| 274 | 100A FP MCCB 30kA |
| 275 | 125A FP MCCB 36kA |
| 276 | Supply and Installation of following rating isolators mounted on suitable thermo plastic type box of IP 65 protection. The enclosure shall be mounted suitably on wall / plate / pedestal mounting (Make Hensel KV PC 8104 or equivalent approved make) Scope shall be complete with necessary minor civil works,grouting etc. |
| 277 | 100A FP |
| 278 | 63A FP |
| 279 | 32A FP |
| 280 | Supply and Installation of following DIN rail mounted kWH meter and accessories mounted on exisitng DB. DIN Rail mounted digital 3ph kWH meter Cl 1 with RS 485 communication and push to push consumption facility. Make : (L&T 4000 Series WD4000103OOO kWH meter+WD400010RSOO RS Communication module) or equivalent in approved make. |
| 281 | Supply, Installation, Testing & Commissioning of following in suitable CRCA steel enclosure duly painted with powder coated finishing on surface including all the mounting accessories, internal wiring, etc as required complete. Enclosure : Siemens 8GB32100RC08 or Legrand 5077 94 or equivalent approved makeDIN Rail mounted digital 3ph kWH meter Cl 1 with RS 485 communication and push to push consumption facility. Make : (L&T 4000 Series WD4000103OOO kWH meter+WD400010RSOO RS Communication module) or equivalent in approved make. |
| 282 | Supply, Installation, Testing & Commissioning of following Time switches with contactors in suitable CRCA steel enclosure duly painted with powder coated finishing on surface including all the mounting accessories, internal wiring etc as required complete. |
| 283 | Single channel digital time switch with auto-manual option+ 25A power contactor Make: Timer: L&TAUTS02DIG00 + Modular Contactor:L&T Power contactors AUMC1002501 or equivalent approved make . Enclosure : Siemens 8GB32100RC04 or L&T DBENC004SD or equivalent approved make |
| 284 | Digital time switch with auto-manual option+ 40A power contactor. Make: Timer: L&TAUTS02DIG00 + Modular Contactor:L&T Power contactors AUMC3004003 or equivalent approved make . Enclosure : Siemens 8GB32100RC06 or L&T DBENC006SD or equivalent approved make |
| 285 | Supply, installation & commissioning of programmable recess/surface mounted PIR occupancy sensor with in built day light sensor with passive photocell. The sensor shall have adjustable off delay timer, sensitivity level adjustment etc prewired complete with all required accessories. Make: Honeywell K5017 or equivalent approved make(6mm Dia and 2.5mtr mounting height) |
| 286 | Supply, installation & commissioning of programmable recess/surface mounted PIR occupancy sensor with in built day light sensor with passive photocell. The sensor shall have adjustable off delay timer, sensitivity level adjustment etc prewired complete with all required accessories. Make: Honeywell LS3200RMBSM or equivalent approved make(9mm Dia and 4.5mtr mounting height) |
| 287 | Supply installation, testing and commissioning of DOL starter upto 5HP,3ph motor including auxilliary contactors, capacitors ,SinglePhasePrevention ,short circuit and overload protection and all necessary accessories as required complete.Make:siemens 3TW72911A.xx or equivalent approved make |
| 288 | Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth,IP 66 enclosed plug top alongwith 20 amps \\"C\\" curve, SP, MCB, in the IP66 enclosure, on surface or in recess,complete with connections, testing and commissioning etc. as required. Make: Hensel TR 119 306 TS or equivalent approved make |
| 289 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 290 | 12 way, Double door |
| 291 | 8way, Double door |
| 292 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. |
| 293 | Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 294 | 63amps |
| 295 | 40amps |
| 296 | Supply of indoor surface mounted LED Batten with Extruded aluminium housing and Polycarbonate Diffuser ,along with driver,system wattage of 20+/-2 Watts (single lamp) ,lumen output of lamp not less than 1900 lumen, power factor >= 0.9,rated life of L70 @ 50,000 hours, system efficacy greater than or equal to 95 lumen/watt, cool day light and including all the necessary accessories as required complete.Make:- Cat No: Philips Astra BN150W LED20S-6500 PSE OD GR or LT Wand WO1857S000 or Wipro LL20-281-XXX-65AL1 or equivalent approved make |
| 297 | Supply of indoor surface / suspended Well glass LED fixture with Pressure die cast aluminium housing and Diffuser ,along with driver,system wattage of 40+/-5 Watts (single lamp) ,lumen output of lamp not less than 3500 lumen, power factor >= 0.9,rated life of L70 @ 50,000 hours, system efficacy greater than or equal to 80 lumen/watt, CRI 70,5700K and including all the necessary accessories as required complete.Make:- Cat No: LT ETERNE E04057ID00 or equivalent approved make |
| 298 | Supply of indoor suspended LED Linear fitting with Extruded aluminium housing and Diffuser along with driver. The fixture shall have system wattage of 40+/-4 Watts,rated life of L70 @ 50,000 hours, lumen output of lamp greater than 3200 lumen, power factor >= 0.9, system efficacy not less than 90 lumen/watt, cool daylight and including all the necessary accessories as required complete.Make:- Cat No: LT Cane Pendent STD C04357PS00 or Crompton Greaves Trend I surface mountable LCLP75-43-CDL or equivalent approved make. |
| 299 | Supply of industrial surface mounted LED batten and lamp with Poly Carbonate Body and PolyCarbonate Diffuser, along with driver , surge protector,system wattage of 40+/-4 Watts,lumen output of lamp greater than 3600 lumen, power factor >= 0.9, system efficacy greater than 95lumen/watt,cool day light and including all necessary accessories as required complete.Make:- Cat No: Crompton IPFC112LT-8-16 housing+ 2nos of LTT8-20 LED or Wipro Capsule LED LE20-491-XXX-57-XX or LT Slick 1997013750 or equivalent approved make |
| 300 | Supply of 2x2 LED recess mounted fixture with housing made of metallic CRCA powder coated body or pressure die cast Aluminium body with a high efficiency diffuser along with driver,system wattage 34+/-4 Watts,lumen output of lamp greater than 3500 lumens, power factor >= 0.9,rated life of L70 @ 50,000 hours, system efficacy greater than 95 lumen/watt, Cool day light fixture ,with suitable driver and including all necessary accessories as required complete.Make:- Cat No: Philips Smart Glow RC383B LED 36S-6500 PSU OD WH PIR or LT Illusion I03657R000 or equivalent approved make. |
| 301 | Supply of LED outdoor lighting luminaire. The fixture shall be of IP66 protected, pressure die cast aluminium housing body with optimal heat sink, with system wattage less than 40 (+/-5)W with rated life of L70 @ 50,000 hours, CRI greater than or equal to 70 & with system lumens greater than 2300 lumen and system efficacy greater than or equal to 95%.Make Wipro skyline LR02-451-XXX-57-G1 or equivalent approved make |
| 302 | Supply of LED landscape focus light with IP65 rating, made of extruded aluminium body, along with driver,system wattage of maximum 5 W, power factor >= 0.9,rated life of L70 @ 50,000 hours, system efficacy greater than 80 lumen/watt, and including all necessary accessories as required complete.Make:-KLITE TRIOSCAPE BRACKET 1x3W - or equivalent approved make) |
| 303 | Supply of LED Power Factor ≥ 0.9, Power Consumption 86w ± 5%, Luminous Flux 5000 Lm ± 5%, LED Lights Source SMD, Color Rendering Index ( CRI) ≥ 80, Beam Angle 120°, Luminous Efficacy 60-70 Lm/w, Dimension L : 8 FEET, W: 50mm, H: 70mm, Mounting Type HANGING TYPE, LED Rated Life > 50,000 Hours, IP Rating IP20, Powder Coated Aluminium Body with PC Diffuser Body Color White / Black, Surge Protection Upto 4KV (luker lpl 70502.4M or equivalent make ) |
| 304 | Supply of LED Power Factor ≥ 0.9,Power Consumption 43w ± 5%,Rated Luminous Flux 2500 Lm ± 5%,LED Lights Source SMD,Color Rendering Index ( CRI) ≥ 80,Beam Angle 120°,Luminous Efficacy 60-70 Lm/w,Dimesnsion L : 4 FEET, W: 50mm, H: 70mm,Mounting Type HANGING TYPE,LED Rated Life > 50,000 Hours,IP Rating IP20,Powder Coated Aluminium Body with PC DiffuserBody Color White / Black,Surge Protection Upto 4KV(luker lpl 70501.2M or equivalent make ) |
| 305 | Supply of LED Power Factor ≥ 0.95, Power Consumption 12w ± 5%, Luminous Flux 1200 Lm ± 5%, LED Lights Source COB, Color Rendering Index ( CRI) ≥ 80, Dimesnsion Dia : 83mm, H: 81mm Ceiling Cutout Dia : 73mm, Mounting Type Recess Mount, LED Rated Life 50,000 Hours, IP Rating IP20, Surge Protection Upto 4KV,hDie Cast Aluminium Body with igh-efficiencyhigh efficiency Aluminium Reflector Optics, Beam Angle 38°, LED Luminous Efficacy 100 Lm/w ± 5%(luker lagrcob 12 or equivalent make ) |
| 306 | Supply of LED Power Factor ≥ 0.95, Power Consumption 12w ± 5%, Rated Luminous Flux 1200 Lm, LED Lights Source SMD, Color Rendering Index ( CRI) ≥ 80, Beam Angle 120°, LED Luminous Efficacy 100 Lm/w, Dimension L : 173mm, W: 173mm, H: 20mm Ceiling Cutout L : 153mm, W: 153mm, Recessed Mount, LED Rated Life 50,000 Hours, IP Rating IP20, Aluminium Body with PC Diffuser, Surge Protection Upto 4KV(luker lnps12 or equivalent make ) |
| 307 | Supply of LED Power Factor ≥ 0.9,Power Consumption 40w ± 5%, Rated Luminous Flux 3600 ± 5%,LED Lights Source SMD, Beam Angle 120°,Luminous Efficacy 90-100 LM/W, Dimesnsion L: 595mm , W: 595mm, H: 35mm, Mounting Type Recess Mounted,LED Rated Life 50,000 Hours, IP Rating IP20,Aluminium Body with PC Diffuser, Surge Protection Upto 2.5KV(luker lpsfl2240or equivalent make ) |
| 308 | Supply of LED Power Factor ≥ 0.95, Power Consumption 12w ± 5%, Luminous Flux 1200 Lm ± 5%, LED Lights Source COB, Color Rendering Index ( CRI) ≥80, Beam Angle 45°, LED Luminous Efficacy 100 Lm/w ± 5%, Dimesnsion Dia : 76mm, H: 100mm, Surface Mounted, Rated Life 50,000 Hours, IP Rating IP20, Die Cast Aluminium Body with Specular Finish Al.Reflector, Surge Protection Upto 4KV(luker lcobsrr12 or equivalent make ) |
| 309 | Supply of LED Power Factor ≥ 0.9, Power Consumption 14.4W ± 5% / 0.6M, Profile Strip Used LPLS120 (120 LED/M), Luminous Flux 850 Lm ± 5%, LED Lights Source SMD, Color Rendering Index ( CRI) ≥ 80, Beam Angle 120°, Luminous Efficacy 60-70 Lm/w, Dimension L : 0.6 MTR, W: 50mm, H: 70mm, Mounting Type HANGING TYPE LED, Rated Life > 50,000 Hours, IP Rating IP20, Powder Coated Aluminium Body with PC Diffuser Body Color White / Black, Surge Protection Upto 4KV(luker lpl 70500.6m or equivalent make ) |
| 310 | Supply of LED Input Voltage Range AC 220V -240 V Power Factor ≥ 0.9 Power Consumption 29w ± 5% Frequency 50 Hz Rated Luminous Flux 1750 Lm ± 5%Dimesnsion L: 1.2M , W: 50mm, H: 70mm Color Rendering Index ( CRI) > 80 Beam Angle 120° Luminous Efficacy 60-70 Lm/w ± 5% Colour Temperature NW Working Temprature 0° c to 45°c Mounting Type Hanging Mount LED Rated Life 50,000 HoursIP Rating IP20 Luminaire Body & Finish Powder Coated Aluminium Body with PC DiffuserBody Color BlackShort Circuit Protection YesOpen Circuit Protection YesSurge Protection Upto 4KV Over Voltage Protection Yes(luker 70501.2m or equivalent make ) |
| 311 | Supply of LED Input Voltage Range AC 220V -240 V Power Factor ≥ 0.9 Power Consumption 43w ± 5% c Dimesnsion L: 0.6M in Each Side, W: 50mm, H: 70mm Color Rendering Index ( CRI) > 80 Beam Angle 120°Luminous Efficacy 60-70 Lm/w ± 5%Frequency 50 Hz Short Circuit Protection Yes Open Circuit Protection Yes Surge Protection Upto 4KVLuminaire Body & Finish Powder Coated Aluminium Body with PC Diffuser Body Color Black Over Voltage Protection Yes Mounting Type Hanging Mount LED Rated Life 50,000 Hours IP Rating IP20 Colour Temperature NW Working Temprature 0° c to 45°(luker lpl7050 or equivalent make ) |
| 312 | Supply of Input Voltage Range AC 220V -240 V Power Factor ≥ 0.9 Power Consumption 29w ± 5% Frequency 50 Hz Rated Luminous Flux 1750 Lm ± 5% Dimesnsion L: 1.2M , W: 50mm, H: 70mm Color Rendering Index ( CRI) > 80 Beam Angle 120° Luminous Efficacy 60-70 Lm/w ± 5% Colour Temperature NW Working Temprature 0° c to 45°c Mounting Type Hanging Mount LED Rated Life 50,000 HoursIP Rating IP20 Luminaire Body & Finish Powder Coated Aluminium Body with PC DiffuserBody Color BlackShort Circuit Protection YesOpen Circuit Protection YesSurge Protection Upto 4KV Over Voltage Protection Yes( Luker LPL70501.2M BK(29W) or equivalent model) |
| 313 | Supply of LED outdoor floodlight luminaire. The fixture shall be of IP66 protected, pressure die cast aluminium housing body with optimal heat sink, with system wattage less than 100 (+/-5)W with rated life of L70 @ 50,000 hours, CRI greater than or equal to 70 & with system lumens greater than 10000 lumen and system efficacy greater than or equal to 95%.Make Wipro LF20-122-060-57-XX or equivalent approved make |
| 314 | Supply of LED recess mounted down light made of die cast aluminium, along with driver,system wattage of 10+/-2 Watts,lumen output of lamp greater than 900 lumens, power factor >= 0.9,rated life of L70 @ 50,000 hours, system efficacy greater than 90 lumen/watt ,cool daylight and including all necessary accessories as required complete.Make:- Philips DN192B LED9S 6500 PSU WH S1 or equivalent approved make) |
| 315 | Supply of LED surface mounted down light with IP65 rating, made of extruded aluminium body, along with driver,system wattage of 20+/-2 Watts,lumen output of lamp greater than 1700 lumens, power factor >= 0.9,rated life of L70 @ 50,000 hours, system efficacy greater than 83 lumen/watt, colour temperature at 6000K and including all necessary accessories as required complete.Make:-Wipro LD-52-301-040-060-XX or equivalent approved make) |
| 316 | Supply of 10+/-2w LED Bulkhead fitting with die cast aluminium housing, PC diffuser and IP65 Protection suitable for operation on 230V 50Hz AC, wall / ceiling including giving connections with required length of 16/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire and making good the surface as required. (Make: Philips :WT202W led6s cw psu s2 PC or Crompton LBH-10-CDL or equivalent approved make) |
| 317 | Supply of following sizes of 1200 mm sweep. 5 star rated ceiling fan, with double ball bearing, Aluminium pressure die cast body with Aluminium blades, canopies, hanging shackle, 30 cm down rod and without speed regulator suitable for 240V 50 HZ, AC supply confirms to IS 374/1979 as required complete. (Make crompton-ENTRUST50 or equivalent approved make). |
| 318 | Supply of 450 mm size wall mounting oscillating type fan having three speed control, oscillation control at bottom and suitable for operation on single phase 230 volt, 50Hz AC supply complete with continuous duty motor, chrome plated front and rear gaurds and all accessories as required complete.(Make: CG Vortex air circulator 450mm or equivalent approved make). |
| 319 | Supply of 450 mm sweep,900 rpm heavy duty exhaust fan in metal body with louvers working on 230 V AC supply complete with all accessories as required. (Crompton EXHD 450 -6-1 or equivalant approved make) |
| 320 | Supply of 250 mm sweep,900 rpm light duty exhaust fan in plastic body with self opening louvers working on 230 V AC supply complete with all accessories as required. (Crompton Brisk Air or equivalant approved make) |
| 321 | Installation, testing and commissioning of LED down lighter fittings on ceiling/false ceiling with all mounting accessories as required complete including interconnections using 3 runs of 1.5 sqmm FRLS PVC insulated stranded copper conductor as required. |
| 322 | Installation, testing and commissioning of LED fittings with chain and copper wiring - Installation testing and commissioning of prewired fluorescent fittings of all types including LED complete with all accessories, lamps etc. on false ceiling including supplying and fixing of GI chain and hook arrangement, upto 60cm length, and wiring using 3 runs of 1.5 sqmm FRLS PVC insulated stranded copper conductor cable as required. |
| 323 | Installation, testing and commissioning of High bay/Mid bay/LED/ FLOOD type fittings on wall/Column/truss/false ceiling using suitable MS clamps, nuts, bolts/ 20mm heavy duty GI chain/ pipe (upto 50cm)etc including connections with 3C 1.5 Sq.mm PVC insulated flexible copper conductor cable as required. |
| 324 | Installation, testing and commissioning of Wall fan, exhaust fan including all the supports as required and wiring using 3 runs of 1.5 sqmm FR PVC insulated stranded copper conductor etc complete. |
| 325 | Installation, testing and commissioning of pre-wired, LED/ fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 326 | Installation, testing and commissioning of ceiling fan, including fixing the regulator, wiring using down rod of 100cm length using 3 runs of 1.5 sqmm FR PVC insulated stranded copper conductor etc. as required. |
| 327 | Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored) |
| 328 | Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.Upto 450 mm sweep |
| 329 | Supply and installation of Electric Pedestal Type Fan and Regulator 400 Adjustable height, Min. 900 mm Max. 1050 mm (for 400 mm size fan)LUKERR |
| 330 | Numbering of ceiling fan / exhaust fan/ fluorescent fitting as required. |
| 331 | Supply,installation ,testing and comissioning of maintenance free earthing using 4 mtrs length,20mm dia 250 microns molecularly copper bonded steel rod, stainless stell connectors and fasteners for connecting earth strip.The earth electrode shall be filled with earth enhancing compound (12.5 kg mineral compound / 22.6 kg low resistivity graphite compound).FRP (UFE FRP)Earth electrode inspection chamber with heavy duty cover should be used to cover the Earth Rod. The dimension shall be 300mmx 300mmx 300mm with a weight bearing capacity of 15KN.The item shall be inclusive of installation charges,including digging bore,providing all required accessories like terminal connector,screw for fixing earth pit cover etc. |
| 332 | Providing and fixing GI/Cu strip/wire on surface or in recess for connections etc. as required. |
| 333 | 50mmX6mm GI |
| 334 | 25mm x 6 mm GI |
| 335 | 25mm x 3 mm Cu |
| 336 | 3.15mm Cu (10 SWG) |
| 337 | Supplying and laying following GI or copper strip(tinned at the points of contacts) / wire at 0.6m below ground level including excavation and refilling for conductor earth electrode including welding etc as required. |
| 338 | 50mmX6mm GI |
| 339 | 25mm x 6 mm GI |
| 340 | 25mm x 3 mm Cu |
| 341 | 3.15mm Cu (10 SWG) |
| 342 | Supply and fixing outdoor type START/STOP (2way) push button station (IP65) including all the necessary accessories as required complete with suitable mounting arrangement.(Cat No Hensel-PBS 0201 or equivalent approved make) |
| 343 | Supply and fixing anodised aluminum glass framed shock treatment chart. |
| 344 | Supply and fixing of First aid box |
| 345 | Supply of Rubber hand gloves suitable for 11 KV. |
| 346 | Supply and fixing of of fire retardant/extinguishing electrical insulated synthetic mat of 2m x 1m x 2 mm for 3.3kV grade thick, +/- 10% confirming to BIS: DOC No. ET-02 (5440) meeting requirements of IS:15652:2006 (with upto date amendment), suitable for 3.3kV voltage and having minimum width of 1000mm +/- 20mm and including supply of required quantity of adhensive / compound . |
| 347 | Supply and fixing of fire retardant/extinguishing electrical insulated synthetic mat of 2m x 1m x 2.5 mm for 11kV grade thick, +/- 10% confirming to BIS: DOC No. ET-02 (5440) meeting requirements of IS:15652:2006 (with upto date amendment), suitable for 11kV voltage and having minimum width of 1000mm +/- 20mm and including supply of required quantity of adhensive / compound . |
| 348 | Supply and fixing single line diagram, schematic diagrams etc. of A0 size on suitable Aluminium sheet including lamination etc. as required complete on wall. |
| 349 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. (but without charcoal/ coke and salt ) as required. |
| 350 | Providing and fixing H.T. danger notice plate of 250 mm X 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. |
| 351 | Supply and fixing of 8 mm Aluminum Round Conductor as horizontal air terminal for parapet wall/terrace with the required mounting clamps , cross connectors , expansion piece and other accessories required as per IEC 62305-3 |
| 352 | Supply and fixing of 8 mm Aluminum Round Conductor as down conductor with the required mounting clamps , cross connectors , expansion piece and other accessories required as per IEC 62305-3 |
| 353 | Providing and fixing of test joint suitable for hot dipped galvanized steel tape 30 mm x 3mm and 8mm dia solid round aluminium conductor made of stainless steel SS 304 grade. Conforms to the requirements according to (IS/IEC 62305).with an outdoor glass-fibre reinforced polycarbonate enclosure having minimum inner dimension of 75mm x 75 mm x 50 mm. |
| 354 | Providing and laying hot dipped galvanized steel tape 30 mm X3 mm from earth electrode directly in ground as required. |
| 355 | Design. Supply, installation, testing and commissioing of Energy Monitoring system including desktop, related softwares,HMI, hardwares, cables, license etc. |
| 356 | Liasioing with EIG/KSEB and getting necessary approval partially/fully (more than one time) including drawing correction, report submission getting final approval etc. |
| 357 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil |
| 358 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. |
| 359 | Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved |
| 360 | Soling with soling stone of size 150 to 75 mm brokenstone and binding materials, including hand packing and wedging them tightly so that the whole is formed as a solid mass, spreading binding material in 12mm thick layers and sweeping the same to fill the voids,watering profusely and consolidating with hand rammer/ plate vibrator etc complete as per the direction of Engineer-in - Charge. |
| 361 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) |
| 362 | Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M-30 grade conforming to IS 456 or IS 10262 for reinforced cement concrete structural elements such as footing,grade beam,columns etc,using coarse sand conforming to IS 383 and 20mm nominal size graded hard granite broken stones, excluding the cost of centering, shuttering, finishing and reinforcement including admixtures in proportion of 0.5% of weight of cement (asper IS 9103) to accelerate,retard setting of concrete improve workability without impairing strength and durability as per the direction of Engineer-in-charge.Cement content 380 Kg/m3 as per the approved design mix to achieve the specified target strength.No extra cost shall be paid for additional cement. All work upto plinth level. |
| 363 | Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete |
| 364 | Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. |
| 365 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 366 | Design,Manufacturing,Supply,Installation,Testing & Commissioning of elevator system including all freight and landing charges,insurance in country of origin and in India,all as per the Technical freight and landing charges,insurance in country of origin and in India,all as per the Technical specification,scope of work and approved drawings.10 Pax (680 Kg) |
| 367 | Supplying & erecting telephone cable 2 pair with 0.5 mm dia. laid in provided PVC casing / conduit |
| 368 | Supply and erection of 150/150 pairs MDF Box. |
| 369 | Supply and erection of Digital EPABX |
| 370 | Supplying and erecting modular type RJ11 Tel Socket( including switch board, modular switches and concealed switchbox and modular plate.) |
| 371 | Supply & erection of Cat 6+ UTP Cable in provided PVC casing / conduit |
| 372 | Supplying and erecting modular type 1 RJ45 outlet duly erected on and including plate and box of suitable Module(including concealed box and modular plate.) |
| 373 | Supplying and erecting FR grade, PVC armoured multimode Optical Fibre Cable with 12 fibres on wall/ceiling or laid in provided pipe/trench. |
| 374 | Supply & installation of 24 port Fibre Optic Ethernet Switch. |
| 375 | Supply and installation of 24 Port Fibre Optic Patch Panel |
| 376 | Supply & installation of 24 port Cat-6 Ethernet Switch. |
| 377 | Supply & installation of 48 port Cat-6 Ethernet Switch. |
| 378 | Supply and installation of 24 Port Cat-6 Patch Panel |
| 379 | Supply and installation of 48 Port Cat-6 Patch Panel |
| 380 | U Rack of required size and configuration |
| 381 | WORKS AT VYTILLA OCCShifting, Installation, Testing and Commissioning of 6 kVA (1+!) Single phase input, Single Phase output, true on-line UPS system with 1hr back up at full load, output isolation transformer, including all accessories, SMF batteries VRLA type with powder coated CRCA cabinet including all accessories such as output panel required for ups parellel operation, cabling etc as required complete having following specification.The UPS system consist of two numbers of UPS unit and two set of battery bank . The UPS shall be suitable for parellel operation.The above work include some additional auxiliary work as per the site condition, scope of work. |
| 382 | Supply,Installtion , Testing and Commisioning of HVAC VRF system for the entire first floor as per the scope and technical specification . The System includes all necessary works including outdoor units, duct work , thermal insulation and air distribution system |
| 383 | Fire Fighting Works |
| 384 | Supply, Installation, Testing and Commissioning of MS(Heavy C' Class) pipe IS:1239/ IS: 3589 marked including all fittings and accessories such as elbows, flanges, tees, reducers etc. conforming to IS standards complete including painting, welding, jointing and neoprene gaskets, nuts, bolts etc. as required. (for fire hydrant and sprinkler system). The pipe shall be painted with one coat of primer & two coats of post office red enamel paint. The pipe shall fixed on ceiling, walls, columns, truss etc for all heights with suitbale hangers/ supports and fasteners etc including cutting the walls/means etc and making good the same complete as required as per the technical specification. MAKE-JINDAL/TATA/SAIL/ZENITH |
| 385 | Dia - 100 mm |
| 386 | Dia - 65 mm |
| 387 | Dia - 50 mm |
| 388 | Dia - 25 mm |
| 389 | Supply, installation, testing and commissioning of sprinkler heads of the following type, complete in all respects as per technical specifications-Standard response, standard coverage pendant sprinkler ;1/2\\" NPT, K-5.6, Chrome Finish; operating temperature at 68 deg. C., including the cost of rosette plate.Make - NEWAGE/TYCO/RELIABLE/HD FIRE/VIKING |
| 390 | Supply, installation, testing and commissioning of 1.0 m unbraided flexible drop to position the sprinkler head in desired location in suspended ceilings. The unit must be complete with stainless steel flexible drop with nipple, reducer, square bar and brackets etc complete in all respect as per technical specification. Make - NEWAGE/TYCO/RELIABLE/HD FIRE/VIKING |
| 391 | Supply and installation of ISI marked ABC Stored pressure type Fire Extinguisher 6 Kgs Capacity Mono Ammonium Phosphate based Dry Chemical Powder for Fighting ABC Class of Fire, stored Pressure type of Mild steel body pressurized by Nitrogen Gas. The Extinguisher shall have pressure gauge for indicating inside pressure with opening and closing lever of squeeze grip type with tamper proof seal, complete with wall bracket as per the technical specification.Make - MINIMAX/SAFEX/SAFEGUARD/LINTEX/BHARATH/ CEASE FIRE/SUPREMEX |
| 392 | Supply, installation, testing and commissioning of First-aid Hose Reel with MS construction spray painted in Post office Red, |
| 393 | Supply, installation, testing and commissioning of 63 mm dia, 15 mtr. Long RRL hose pipe with 63 mm dia Male and Female Gun metal couplings duly binded with wire |
| 394 | Supply, installation, testing and commissioning of Addressable type Manual Call Point Re-setable type via special key |
| 395 | Supply, installation, testing and commissioning of loop powered wall sounder beacon at different locations complete for both audio and visual |
| 396 | Supply, Installation, Testing & Commissioning of 16 bit intelligent Addressable Fire Alarm Control Panel |
| 397 | Supply and laying of 2x 1.5sq.mm armoured Copper FRLSZH cable |
| 398 | Supply, installation, testing and commissioning of public address and talk back system |
| 399 | Supply, installation, testing and commissioning of wall mounted talk back unit |
| 400 | Supply and installation of glow signage (photoluminescent) of \\"3M\\" or equivalent Make such as Emergency Exit/Fire Exit signage etc. of standard size as per conventional design/ colour code on 4 mm thick foam sheet. The signage shall be either fixed on the wall with the help of screws/double tape or hanged from the false ceiling with the help of chain & screws etc. complete as required as per the technical specification. |
| 401 | PLUMBING AND SANITARYWARES |
| 402 | Providing and fixing white vitreous Back to walll type water closet (European type) with seat and lid, Concealed flushing cistern, with actutor nobe including fittings & overflow arrangement with specials of standard make of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with Campbell plus slim soft close seat cover ( Price rage of WC of Rs.10500 to Rs.12000 , Excluding cost of concealed flush tank & other accessories)Make: Jaquar,Kohler,Cera |
| 403 | Providing & fixing of star white vitreous china under counter wash basin of approved size and make, C P brass waste assembly, CP brass bottle trap with extension piece 450mm long connections pipes wall flanges and rubber adapters for waste connection, CP brass angle valve, CP brass pillar cock, complete including CI/MS brackets duly painted, nuts, washers, etc. complete, testing and commissioning ,cost and conveyance of all materials,labour charges ,cutting, making good the walls, floors, slab wherever required, lead, lift, etc as per the direction of Engineer in Charge at all levels. (Price range of Rs.8500 to Rs.9500) Thin Rim Table Top Wash Basin505 x 385 x 135 mm Make: Jaquar,Kohler,Cera |
| 404 | Providing and fixing Korian sink of 2 no set (each sqaure sink 600 mm x600 mm) with counter of required size as per drawing and specification with drain board, 40mm CP brass bottle trap, CP brass waste coupling , CP brass sink cock(table mounted), CP brass angle valve etc per IS: 13983 with C.I. brackets & stainless steel plug, including painting of fittings and brackets, cutting and making good the walls ,floors,slab wherever required,testing and commissioning ,including cost and conveyance of all materials, labour charges, lead,lift etc complete as directed by the Engineer in charge at all levels. |
| 405 | Providing and fixing 600 x 450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 406 | Supplying, fixing, testing and commissioning of Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. |
| 407 | 25mm nominal dia |
| 408 | 20mm nominal dia |
| 409 | Providing and fixing gun metal gate valve with C.I. Wheel of approved quality (screwed end) including cost and conveyance of all materials, labour charges, sundries etc complete as directed by the Engineer- in-Charge at all levels |
| 410 | 25mm dia |
| 411 | 20mm dia |
| 412 | Supplying, laying, jointing, testing and commissioning to the satisfaction of Engineer in charge of hard PVC pipes with PVC specials such as tees, bends, door bend, door tee, elbows,unions, etc. with clamps including cutting and making good the walls,testing the lines rectifying any leakages or defects,etc. complete for soil, waste, rain water,drains, vent pipe, etc. concealed or open at all levels including cost and conveyance of all materials, labour charges, sundries etc complete for concealed work as directed by the Engineer- in-Charge. |
| 413 | 110mm OD (6 kg/cm2) |
| 414 | 75mm OD(6 kg/cm2) |
| 415 | Providing and fixing SS floor trap of 110mm outer dia including SS cockroach free floor grating with cup, PVC multitrap etc. complete, testing and commissioning ,cost and conveyance of all materials,labour charges ,cutting, making good the walls,floors,slab wherever required ,lead,lift,etc as per the direction of Engineer in Charge levels. |
| 416 | Providing and fixing CP brass hand spray with lever control (health faucet) of approved make 1meter long flexible tube and CP brass wall hook,CP brass angle valve and all fittings etc. complete, testing and commissioning,cost and conveyance of all materials,labour charges ,cutting, making good the walls wherever required ,lead,lift,etc as per the direction of Engineer in Charge levels. Models-Health Faucet-Jaquar (ALD CHR-563)/Kohler(98100IN-CP)/Grohe (26352000)/QUEO (Q503192520) or equivalent,Angle Valve-Jaquar(0PP-CHR-15053PM)/Grohe (A-4400)/Kohler(80158IN-9-CP)/ Queo(Q503191120)or equivalent |
| 417 | Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately. |
| 418 | Supplying and fixingof LINEAR WORKSTATION for the room 6,11 & 13SIZE: 1200X 600D X 750HT TABLE TOP AND 350HT SCREENS as per the drawing and technical Specifications (Price range of Rs.11,000 to Rs.12,000) |
| 419 | Supplying and fixing of LINEAR WORKSTATION with curvature profile for the room 18SIZE: 1200X 600D X 750HT TABLE TOP AND 350HT SCREENS as per the drawing and technical Specifications (Price range of Rs.19,000 to Rs.20,000) |
| 420 | Supplying and fixing of L SHAPE WORKSTATION for the section 19SIZE: 1500W X1500X 600D X 750HT TABLE TOP AND 350HT SCREENS as per the drawing and technical Specifications (Price range of Rs.15,000 to Rs.16,000) |
| 421 | Supplying and fixing of PLB OPENABLE SHUTTERS STORAGE( BETWEEN THE WORKSTATION)SIZE: 1500W X 600D X 7500MM HT as per the drawing and technical Specifications (Price range of Rs.25,000 to Rs.27,000) |
| 422 | Supplying and fixing AIN TABLE: 1950W X 750D X 750HT TABLE TOPSIDE COMP STORAGE : 1050W X 450D X 750HTfor Cabin (room 26) as per the drawing and technical Specifications (Price range of Rs.27,000 to Rs.28,000) |
| 423 | Supplying and fixing MEETING TABLESIZE: 2400W X 1200D X 750MM HT TABLE TOP for room 24 as per the drawing and technical Specifications (Price range of Rs.20,000 to Rs.22,000) |
| 424 | Supply and fixing of CONFERENCE TABLESIZE: 3600W X 1200D X 750MM HT TABLE TOP as per the drawing and technical Specifications (Price range of Rs.29,000 to Rs.31,000) |
| 425 | Supply and fixing of CONFERENCE TABLESIZE: 4500W X 1500D X 750MM HT TABLE TOP for room 12 as per the drawing and technical Specifications (Price range of Rs.58,000 to Rs.60,000) |
| 426 | Supply and fixing of CONFERENCE TABLESIZE: 3000W X 900D X 750MM HT TABLE TOP for room 3 &4 as per the drawing and technical Specifications (Price range of Rs.24,000 to Rs.25,000) |
| 427 | Supply and fixing of CABIN TABLE -EBJ-01D24 : Main Table: W 2400 x D 900 x H 760mmExtention: W 1900 x D 600 x H 620mm for the room 5 & 10 as per the drawing and technical specification (Price range of Rs.2,05,000 to Rs.2,15,000) |
| 428 | Supply and fixing of RECEPTION-3 2400L x 750D x 1050H for area 2 as per the drawing and technical specification (Price range of Rs.78,000 to Rs.80,000) |
| 429 | Supply and fixing of Square table for Panty (room 23) CAFÉ CHROME :800L x 800D x 750H. With ISO Top as per the drawing and technical specification (Price range of Rs.8,000 to Rs.9,000) |
| 430 | Supply and fixing of Square table for Training Hall (room 27) CAFÉ CHROME :914 dia x 750H. With ISO Top as per the drawing and technical specification (Price range of Rs.10,000 to Rs.11,000) |
| 431 | Supply and fixing of VMT1575 WITH RETURN TABLE + PEDESTAL as per the drawing and technical specification (Price range of Rs.20,000 to Rs.22,000) |
| 432 | Round Discussion table able top: METROPLUS Made of 25mm thick prelaminated particle board of approved shade confirming to E1 norms. All the edges of workstation surface shall be provided with machine pressed 2mm thick imported PVC lipping glued with hotmelt Eva glue free from any VOC. LEGS PERFORM LEGS 50X50 |
| 433 | ISO TOP TABLE-800 X 800 +FRAME FOLDABLE 800 WITH WEL |
| 434 | Supply and fixing of MOBILE PEDESTAL 2D1FSIZE: 400W X 450D X 600HT as per the drawing and technical specification (Price range of Rs.4,500 to Rs.5,000) |
| 435 | Supply and arranging of High Back Mesh Chair for the room 5 & 10 as per the drawing and technical specification.*FP Optima High Back Mesh Chair *Optima Mesh Standard (black)* With Headrest* Multilock With Seat Sliding Mechanism* Three Way – Height Adjustable Armrests (Height) with 2D pad (Left/Right & Front/Back)* Chrome Magna Base* Fabric Upholstered Cushion Seat(Price range of Rs.24,000 to Rs.25,000) |
| 436 | Supply and arranging of Medium Back Mesh Chair for the room 26,3,4,12, 24 & 23 as per the drawing and technical specification.* Amaze Medium Back Mesh Chair * AN 70 Mesh*With Headrest* Self Calibrating Multilock Mechanism* Adjustable Lumbar Support* One Way Adjustable Arms (Height)* Nylon Base * Fabric Upholstered Cushion Sea(Price range of Rs.11,000 to Rs.12,000) |
| 437 | Supply and arranging of Medium Back Mesh Chair with head set for the room 19 as per the drawing and technical * Astro Medium Back Mesh Chair* Headrest* AC 60 Mesh* Single Lock Synchro Mechanism* Adjustable Lumbar Support* One Way Adjustable Arms (Height)* Nylon Base * Fabric Upholstered Cushion Seat(Price range of Rs.9,000 to Rs.10,000) |
| 438 | Supply and arranging of Medium Back Mesh Chair for the room 1 ,2+,4 ,13,18&16 as per the drawing and technical * Astro Medium Back Mesh Chair* AC 60 Mesh * Single Lock Synchro Mechanism* Adjustable Lumbar Support* One Way Adjustable Arms (Height) * Nylon Base * Fabric Upholstered Cushion Seat(Price range of Rs.8,000 to Rs.9,000) |
| 439 | Supply and arranging of Low Back Mesh Visitor chair for Cabin and Trainning hall as per the drawing and technical (Price range of Rs.6,000 to Rs.6,200) |
| 440 | Supply and arranging of chair for training hall (Price range of Rs.6000 to Rs. 7,000)* Magna Flip Cushion Seat* Plastic Back* Fxied Arms* Collapsible Writing Desk - Small* Powdercoted 4 Legs with Castor |
| 441 | Supply and arranging following chair (Price range of Rs.15,500 to Rs. 16,500)ARCTIC - ALUMINIUM POLISHED BASE* Lounge Single Seater Sofa* Fabric / Leatherette Upholstered Cushion Seat & Back* Aluminium Base |
| 442 | Supply and arranging of Cushioned Seat & Plastic Back without Arms & with Powdercoated Legs with Bushes for cabins visitor chair ((Price range of Rs.2,500 to Rs.3,500) |
| 443 | Supply and arranging chair for room 23 as per drawing and techical specification*Cafeteria Stackable Chair* Polypropylene Seat & Back* Powdercoated Sledge Legs Colour : Black , White , Red, Orange & Green(Price range of Rs.3,500 to Rs 4,000) |
| 444 | Supply and setting of CARSYN ROUND COFFEE TABLE 114/109 as per drawing and technical specification(Price range of Rs.8,500 to Rs.9,500) |
| 445 | Supply and setting of DINNING CHAIR /GREY SEAR/WALNUT BACK/LEGS BLAC as per drawing and technical specification (Price range of Rs.11,000 to Rs.12,000) |
| 446 | Supply and setting of LIFT CHAIR /RECLINER as per drawing and technical specification (Price range of Rs.53,000 to Rs.55,000) |
| 447 | Supply and setting for chair as per drawing and technical specification CLARA 'PC' 4 LEGS * Lounge Single Seater Sofa* Fabric / Leatherette Upholstered Cushion(Price range of Rs.16,000 to Rs.18,000) |
| 448 | Supply and setting of Leatherrette / Fabric/ Wooden Frame & metal Legs - One Seat as per drawing and technical specification(Price range of Rs.18,500 to Rs.19,500) |
| 449 | Supply and setting of Leatherrette / Fabric/ Wooden Frame & metal Legs - Three Seat as per drawing and technical specification(Price range of Rs.40,000 to Rs.42,000) |
| 450 | Floor mounted Storage racks up to 1200mm height Providing and fixing 600 mm deep Storage Units constructed from 19mm thick BWP 710 Grade ply as top and carcass with necessary hardwood strengthening. The shutters to be factory finished, made of 19mm BWP 710 Grade ply thick shutters with 1.5mm thick laminate outside & 1mm thk laminate on the inside.The shutters to have matching edge banding.Laminated Internal partitions & fixed shelves shall be provided. Cost shall include lock sets, self-closing hinges, all cabinet hardware of approved make as approved by the Architect. Hardware - Hettich, Hafele or equivalent. |
| 451 | Size 900x600x1200mm (Price range of Rs.21,000 to Rs.22,000) |
| 452 | Size 600x300x1200mm (Price range of Rs.15,000 to Rs.16,000) |
| 453 | Work station 1600x800mmx1200mm+1490x800x1200mm as per drawing (Price range of Rs.75,000 to Rs.76,000) |
| 454 | Providing and fixing custom designed TV unit with 3\\" thik platform bottom, storage cum DVD rack with shutters, Made in 19mm thik marine plywood 710 BWP grade and finished in approved laminate 1.5mm thick outside and 1mm thick on the inside. Wall panelling with 19mm thick marine plywood 710 BWP grade and finiished with 1.5mm thick laminate of approved colour shall be provided.Cost shall include lock sets, self-closing hinges, all cabinet hardware of approved make as approved by the Architect. Hardware - Hettich, Hafele or equivalent. |
| 455 | TV Rack-1, Size 2900mm(L) x 500mm(W) (Price range of Rs.29,500 to Rs.31,500) |
| 456 | TV Rack-2 ,Size 2650mm(L) x 500mm(W) (Price range of Rs.26,000 to Rs.27,000) |
| 457 | TV Rack-3,Size 2300mm(L) x 500mm(W) (Price range of Rs.24,000 to Rs.25,000) |
| 458 | STORAGE : Providing and fixing 450-750mm deep Storage Units constructed from 19mm thick commercial ply with necessary hardwood strengthening. The shutters to be factory finished, made of 19mm thick shutters with 1.5mm thick laminate outside & 1mm thk laminate on the inside.The shutters to have matching edge banding. Internal partitions & fixed shelves also to be laminated. Include Lock sets, self-closing hinges, all cabinet hardware of approved make as approved by the Architect. Hardware - Hettich equivalent. |
| 459 | Design,Supply, Installation, testing and commissioning of 98\\" TV including all necessary licences, associated peripheral, structured cabling, mounting,LAN and necessary Networkingcomplete in all respect |
| 460 | Design,Supply, Installation, testing and commissioning of 65\\" TV including all necessary licences, Associated peripherals, including but not limited to HDMI splitter, HDMI cable, HDMI extender kit, HDMI receiver, wall plates, and RJ45 near each display, shall be provided, structured cabling, mounting, LAN and necessary Networking complete in all respect |
| 461 | Supply, Installation, testing and commissioning of all-In-One video/sound bar for video calling suitable for (5500 X 4200) including all necessary licences, associated peripheral, structured cabling, mounting,LAN and necessary Networking complete in all respect |
| 462 | Supply, Installation, testing and commissioning of all-In-One video/sound bar for video calling suitable for (4400 X 8600) including all necessary licences, associated peripheral, structured cabling, mounting, LAN and necessary Networking complete in all respect |
| 463 | Supply, Installation, testing and commissioning of Video Wall 12.6 x 7.87 ft including all necessary licences, network connectivity ,associated peripheral, structured cabling, mounting, LAN and necessary Networking complete in all respect |
| 464 | Supply, Installation, testing and commissioning of Projector including all necessary licences, network connectivity ,associated peripheral, structured cabling, mounting complete, LAN and necessary Networking in all respect |
| 465 | Supply, Installation, testing and commissioning of wireless screen sharing controller/Wireless presentation including all necessary licences, network connectivity ,associated peripheral, structured cabling, mounting, LAN and necessary Networking complete in all respect |
| 466 | Supply, Installation, testing and commissioning of Cable Cubby including all necessary licences, associated peripheral, structured cabling, mounting, LAN and necessary Networking complete in all respect |
| 467 | Design,Supply, Installation, testing and commissioning of Wi-Fi all necessary licences, associated peripheral, structured cabling, mounting, LAN and necessary Networking complete in all respect |
| 468 | Supply, Installation, testing and commissioning of Dedicated Wi-Fi routers for MD Room, CEO Room, Board Room, and Training Halls 1 & 2, including all necessary licences, associated peripheral, structured cabling, mounting, LAN and necessary Networking complete in all respect |
| 469 | Detailed design of Public Address System including detailed interface design for office area, traning room meeting room of Cable Cubby including all necessary licences, associated peripheral, structured cabling, mounting, LAN and necessary Networking complete in all respect |
| 470 | Supply, Installation, testing and commissioning of PAS systems for office area, traning room meeting room comprises of Amplifier, Controller with redundancy, Ambient Noise sensor,speakers, microphone and network rack for Public address including all necessary licences, associated peripheral, structured cabling, mounting, LAN and necessary Networking complete in all respect |
| 471 | Supply, Installation, testing and commissioning of Network , Colour Printer and scanner for printing and scanning the reports in suitable format i.e A4 including associated Peripheral, licence, structured cabling, mounting, LAN and necessary Networking complete in all respect |
| 472 | Supply, Installation, testing and commissioning of Network , Colour Printer and scanner for printing and scanning the reports in suitable format i.e A3 & A4 including associated Peripheral, licence, structured cabling, mounting, LAN and necessary Networking complete in all respect |
| 473 | Supply, Installation, testing and commissioning of IP Phone for Office including associated peripheral, mounting, LAN and necessary networking complete in all respect |
| 474 | Supply, Installation, testing and commissioning of 42 u Network Racks including associated Peripheral Fan and mounting arrangement for IP Phone switch . |
| 475 | Supply, Installation, testing and commissioning of fixed dome camera for OCC with associated peripheral, licence, mounting, LAN and necessary networking complete in all respect |
| 476 | Supply, Installation, testing and commissioning of Manageable POE Network Switch 48 ports including associated peripheral, license, mounting, complete in all respect. Use for IP Phone |
| 477 | Supply, Installation, testing and commissioning of Manageable POE (Industrial grade) Network Switch 16 ports including associated peripheral, license, mounting, complete in all respect . Use for VHF |
| 478 | Supply, Installation, testing and commissioning of A0 plotter and associated Peripheral, all necessary licence, networking, mounting and complete in all respect |
| 479 | Conectivity of all BSNL Lease lines between terminals of the water metro network and to the OCC at High Court |
| 480 | Supply and Laying of Darkfibre cable ( as per the technical specification) in the existing cable trench/ cable duct from M G Roal metro rail station (TER) and connecting with the High court OCC Server along with cable and route redundancy and successful completion of testing and commissioning of the same |
| 481 | Disconnection and safe dismantling of all equipment at the existing OCC, followed by secure transportation, reinstallation at the new OCC location, and ensuring full functionality of all systems as per their intended design and purpose. |
| 482 | Environmental Social Health & Safety (ESHS)Payment shall be paid as:A) 30% after 3 months from Date of LOA on regular submission of ESHS report and compliance with scope, technical specifications and ESHS requirementsB) 30% after 5 months from Date of LOA on regular submission of ESHS report and compliance with scope, technical specifications and ESHS requirementsC) 40% on completion of all Works & QHSE requirements Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
| 6 | Click here to download tender document | Tender Documents |
| 7 | Click here to download tender document | Tender Documents |
| 8 | Click here to download tender document | Tender Documents |
| 9 | Click here to download tender document | Tender Documents |
| 10 | Click here to download tender document | Tender Documents |
| 11 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
