Tender For Provn Of Toilet Block At 9 Rajput And Boundary Wall With Main Gate At Ecib At Tezu Under Ge (P) Lohitpur
Tender Value
18.50 Lakhs
Estimated cost
Bid Submission
11 Jul 2026
10 days left
EMD
37000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lohit → Arunachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Toilet Block At 9 Rajput And Boundary Wall With Main Gate At Ecib At Tezu Under Ge (P) Lohitpur
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out Soft/Loose soil complete all as specified and as directed. |
| 2 | Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10sq.m on plan and not exceeding 1.5m in depth and getting out soft/loose soil complete all as specified and as directed. |
| 3 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 15cm in soft/Loose soil complete all as specified and as directed. |
| 4 | Removing of excavated material exceeding 250m but not exceeding 500 m as in soft soil and depositing where directedat level n.exc 1.50m level from the starting point complete all as specified and as directed. |
| 5 | Material and labour for plain cement concrete, 1:4:8 type D-2 (using 40 mm gradedcrushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed. |
| 6 | Material and labour for reinforced cement concrete design Mix M25 (using 20 mm graded crushed stone aggregate) as in foundations, including rafts, footings, foundation beams; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. |
| 7 | Material and labour for Reinforced cement concrete design Mix M25 (using 20 mm graded crushed stone aggregate) as in plinth beams; bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. |
| 8 | Material and labour for Reinforced cement concrete design Mix M25 (using 20 mm graded crushed stone aggregate) as in beams, cantilever, lintel beam above 1.5m span complete all as specified and as directed. |
| 9 | Material and labour for Reinforced cement concrete design Mix M25 (using 20 mm graded crushed stone aggregate) as in columns, pillars, piers posts and struts complete all as specified and as directed. |
| 10 | Material and labour for Reinforced cement concrete design Mix M25 (using 20 mm graded crushed stone aggregate) as in Slabs supported on walls, beams and columns, in floors, roofs, landing balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed., |
| 11 | Material and labour for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape reqired including cranking, bending spirally for hooping for columns hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed. |
| 12 | Material and labour for Mild steel TMT bars 8mm &10mm dia and over, cut to length, bent to shape reqired , bending spirally and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips as in stirrups complete all as specified and as directed. |
| 13 | Material and labour for brick work with sub class B brick straight or curved on plan not exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed. |
| 14 | Material and labour for brick work with sub class B brick in half brick wall, built in cement mortar 1:4 complete all as specified and as directed. |
| 15 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter. Rough finished surfaces of concrete as in Flat |
| 16 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mmthick (Horizontal or sloping) Rough finished surfaces of concrete as in Flat |
| 17 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilivers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.Rough finished surfaces of concrete as in Flat |
| 18 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions Rough finished surfaces of concrete as in Flat. |
| 19 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete rail ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon tal or sloping and similar work exc 10cm but n exc 20cm wide as in Flat. |
| 20 | Supply and fixed Solid PVC Door Frame of size 50mm x 47mm made out of5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing |
| 21 | Supply and fixed factory made solid panel PVC door shutler 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered WiUl hea moulded plain colour PVC 'C' chrume having a PVC sheet sh'ip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail Panelling of plain colour PVC sheet to be fitted in the M.S. fraine welded / sealed to the stiles & rails with suitable PVC shee beading, and joined together with solven cement, suppling & fixing in the frame a site as per specification & drawing. |
| 22 | Supply and fixed 150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 23 | Supply and fixed 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 24 | Supply and fixed 100 mm long butt hinge, made out of the stainless steel and fixed complete all as specified and as directed. |
| 25 | Supply and fixed Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed. |
| 26 | Supply & fix sheet glass, ordinary quality, 3 mm thick and glazed with oil putty or fixed with beads in square not exceeding 0.5 Sqm in each pane complete all as specified and directed. |
| 27 | M & L for hardcore (broken stone or boulders) of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 28 | Material and labour for 75 mm thick cement concrete 1:4:8, type D-2 (using 40 mm gradedcrushed stone aggregate) as in sub base for laying of the tiles/ paving finished surface fain and even complete all as specified and as directed. |
| 29 | Material and labour for 25 mm thick cement concrete1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) as in floor sub-base for laying of tile paving finished surface even and fair complete all as specified and as directed. |
| 30 | Material and labour for 75 mm cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) finished surface even and fair as in plinth protection all as specified and as directed. |
| 31 | Material and labour for Non - skid Ceramic clour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white cement to match the existing surface including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed. |
| 32 | Material and labour for Glazed ceramic clour tiles in vertical surface 450x300x7-8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the existing surface including 10mm thick backing coat in cement mortar 1:4 complete all as specified and as directed. |
| 33 | Material and labour for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished surface even and smooth without using extra cement complete all as specified and as directed. |
| 34 | Material and labour for rendering 5 mm thick on concrete surfaces of ceiling of roof, chajja or facia in cement mortar 1:3 finished surface even and smooth without using extra cement complete all as specified and as directed. |
| 35 | Material and labour for rendering 15mm thick in two coat (15 mm + 5 mm) on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 finished surface even and smooth without using extra cement complete all as specified and asdirected.Note :- WPC will be measured separately. |
| 36 | Supply only liquid water proofing compound confirming to IS 2645: 2003 complete all as specified and as directed. |
| 37 | M & L for preparation of newly plastered surface of wall and applying two coats cement base paint over one coat of primer complete all as specified and as directed. |
| 38 | M & L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over one coat of alkali resistant primer complete all as specified and as directed |
| 39 | M & L for preparation of new or previously untreated plastered/gypsum ceiling surfaces and applying two coat of oil bound distemper over a coat of suitable dry wall complete all as specified and as directed. |
| 40 | S & F vitreous china squatting pan, 'Orissa\\" pattern, size 580 mm X 440 mm white with ‘P’ or ‘S' trap, front or back inlet and integral foot rests, any pattern and including fixing bolt, connector to flush pipe, lime concrete bedding and making connections to flush pipe, connector to branch pipe and anti syphonage pipes etc. including sealing the joints and making leak proof using sealant complete all as specified and as directed by Engineer-in-Charge. |
| 41 | Supply and fixed bib taps, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed |
| 42 | Supply and fixed PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 43 | Supply and fixed PVC (SWR) pipes 75mm single socketed, with rubber ring joints fixed to walls complete all as specified and as direcetd. |
| 44 | S & F 10 litres cap PVC, valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete |
| 45 | Material and labour for for 32 mm bore low density polythelene pipes (LDPE) with fittings of pressure rating 6 Kgf / Sqcm fixed to walls or in floors etc complete all as specified and directed. |
| 46 | Supply and fixed mild steel small articles as holdfasts etc complete all as specified and directed. |
| 47 | Supply and fixed 75mm PVC (SWR) branch piece double (double y) equal unequal complete all as specified and directed |
| 48 | Supply and fixed 110mm PVC (SWR) branch piece single (single y) equal unequal complete all as specified and directed |
| 49 | Supply and fixed 75mm PVC (SWR) Junction single (single T) equal unequal complete all as specified and directed |
| 50 | Supply and fixed 110mm PVC (SWR) Junction single (single T) equal unequal complete all as specified and directed |
| 51 | Supply and fixed 110mm PVC (SWR) vent cowl specified and directed |
| 52 | Supply and fixed 75mm PVC (SWR) vent cowl specified and directed |
| 53 | Supply and fixed 75mm PVC (SWR) bends any radius specified and directed |
| 54 | Supply and fixed 110mm PVC (SWR) WC connector bent type specified and directed |
| 55 | Cutting chases, pinning in brick work making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth |
| 56 | Supplying and laying of 16 mm Dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified |
| 57 | Supplying and laying of 20 mm Dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified |
| 58 | S & F wash basins, vitreous china, white, flat back, size 580 mm X 450 mm (for hospital use) with and including cast iron brackets (embedded in wall upto 110 mm depth with and including cement concrete M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate or fixing on wall with and including rawl plug and screws), 32 mm nominal size, copper alloy, nickel chromium plated finish waste fittings, including painting of fittings and brackets, sealing gap between wall and basin with silicone sealant, cutting and making good the walls wherever required and connecting to supply pipes, waste pipes, waste fittings etc. with silicone sealant complete all as specified and as directed. |
| 59 | S & F stainless steel soap dish weight not less than 150 gm each fixed to plugs with chromium plated brass screws complete all as specified and as directed. |
| 60 | S & F brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and as directed. |
| 61 | Supply and fixed 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 62 | PVC (SWR) floor trap 75mm, plain with grating includ ing jointing with solvent cement |
| 63 | PVC connections 15 mm size with PTMT nuts of length 450mm fixed complete all as specified and directed. |
| 64 | Supply and fixed 15 mm dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed but fancy type, chromium plated |
| 65 | S & F rotational moulded polyethylene double layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996 of 1000 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe for connecting inlet, outlet, over flow and washout pipes all as specified and as directed. |
| 66 | Supply and fixed 25mm Gun-metal. globe or gate valves, with iron wheel headt screwed both ends for iron pipe and fixed |
| 67 | Supply and fixed 20mm Ball brass valves. high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed |
| 68 | Material and labour for 75 mm thick PCC type C-2 1:3:6 ( using 40mm graded stone aggregate) as in sub base of flooring/hardstanding etc all as specified and directed. |
| 69 | M & L for chequered cement concrete tiles, cast in rubber mould, glossy finish of approved colour, general purpose, double layer, size 30 cm X 30 cm X 25 mm thick, with mixture of white and grey cement in equal proportions and pigments, set, jointed and pointed in neat cement slurry in floor including laying over 20 mm thick bedding of cement mortar(1:4) all as specified and as directed. |
| 70 | Excavating over areas, n exc 1.5 m deep and getting out in soft/loose soil for foundation etc or for shaft, wells, manholes etc complete all as specified and directed. |
| 71 | Material and labour for brickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in cement mortar 1:4 complete all as specified and as directed. |
| 72 | Material and labour for for rendering 15 mm thick in cement mortar 1:4 on brick work or concrete surface of walls finished fair and even complete all as specified and directed. |
| 73 | Material and labour for Loose filling with Broken bricks of gauge 80 to 150 mm in soakage pits, soakage wells |
| 74 | Material and labour for pre-cast RCC (1:2:4) type B1 using 20 mm graded stone aggregates for cover slab of manhole/soak pit etc set in cement mortar 1:4 complete all as specified and as directed by Engr-in-Charge. |
| 75 | Material and labour for cement concrete 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) as in coping, rounded or chamfered on edges complete all as specified and directed. |
| 76 | Supply, laying, jointing, and testing of SN8 stiffness class Double Wall Corrugated (DWC) HDPE/PP sewage pipes of 150 mm nominal inner diameter, conforming to IS 16098 / EN 13476 standards, featuring a corrugated outer wall and smooth inner liner complete all as specified and as directed. |
| 77 | Material and labor for the installation of a conventional-type Linear Low-Density Polyethylene (LLDPE) Septic Tank of minimum 2,500-litre capacity, designed to collect and treat sewage and sullage water for 20 users, including earthwork excavation in all types of soil/rock to required depths, lifting and disposal of surplus soil, providing and laying a 100mm thick Plain Cement Concrete (PCC 1:4:8) base foundation below the tank, lowering, positioning, leveling, and securely anchoring the tank body, providing and fixing a minimum 50mm diameter uPVC vent shaft extending at least 2 meters above ground level complete with a mosquito-proof cowl cap, making all necessary watertight inlet and outlet connections with heavy-duty rubber seals, backfilling the surrounding trench space with approved soil in layers not exceeding 150mm with thorough watering and compaction, and conducting testing for water-tightness, all complete including all materials, labor, tools, complete all as specified and as directed. |
| 78 | Removing excavated soil not exceeding 50 m distance and depositing where directed at alevel n exc 1.5 metre above the starting point complete all as specified and directed. |
| 79 | Material and labour for Mild steel TMT bars 6 to 8 mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 80 | Material and labour for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide all as specified and directed. |
| 81 | Material and labour for high strength tensile structural steel of Fe-290 (Gde E 165 conforming to IS 2062: 2011 as in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete |
| 82 | Material and labour for high strength tensile structural steel of Fe-290 (Gde E 165) conforming to IS 2062: 2011 as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similarsmall articles |
| 83 | Supply and fixed galvanized steel barbed wire with two strands of line wire of dia 2.24 mm and barbed with point wire of dia 2 mm at 75 mm spacing straining and fixing to any type of standards, rails, straining bolts including securing or tying at crossings with and provision of galvanised iron binding wire, GI staples or steel pins, etc. complete all as specified and as directed (two strand of line wire will be measured as one unit). |
| 84 | Material and labour for hot rolled low tensile structural steel of grade E165 as per IS 15911: 2010 as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar works complete all as specified and as directed. |
| 85 | M & L for point wiring for one light or one fan or one exhaust fan controlled by one switch complete with and including single core PVC insulated, unsheathed flexible conductor FR-LSH cables 1.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through & including heavy mechanical stresses class and -5 temperature class PVC casing/capping of suitable size as required at site including all accessories/ fittings/ junction boxes/ inspection cover etc. ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end complete all as specified and as directed. |
| 86 | S & F PVC rectangular block for mounting DBs, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 mm X 100 mm and 50 mm deep complete all as specified and as directed. |
| 87 | S & F ceiling roses, 6A, 240 V, surface type, intended to support mechanical loads by means of flexible cord, having provision for the connection of switch wiring, screw type terminal, made out of Polyamide or hornbean complete all as specified and as directed. |
| 88 | S & F modular white cover plate with frame, 6 modules complete all as specified and as directed. |
| 89 | S & F modular switch, 1 way, 6 A, 1 module complete all as specified and as directed. |
| 90 | M & L for 1 X 20 watt, 220 V, LED ceiling/wall mounted lighting fixture decorative type with Lamp Lumen not less than 110 lum/watt polycarbonate ,enviornmental friendly ,energy efficient fixed to wall/ ceilling & connecting upto ceiling rose with three core twisted flexible copper conductor cable of suitable size including taking down complete all as specified and as directed. |
| 91 | S & F single door MCB Distribution board of sheet metal enclosure, single pole and neutral, 2 way with 200 Amps rated bus bar, 240 volt, IP42 protection grade and fixed with PVC plug and screws and grouted in wall with M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate complete all as specified and as directed. |
| 92 | Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed. |
| 93 | Supply, laying, jointing, testing and commissioning cross-linked polyethylene (XLPE) insulated cable for working voltages of 1100 V, PVC sheathed, armoured, 2 core, nominal cross sectional area of main conductor 6 sqmm, stranded aluminium conductor, ISI marked as per IS 7098(Part-I): 1988 including cable glands, lugs etc. to suit the cable size and to be laid in trenches, fixed along pole, under floors, through GI pipe laid under floors/roads, through concealed GI pipe along wall etc. complete all as specified and as directed. |
| 94 | Supply and laying double wall corrugated pipe of grade SN8 and 50 mm nominal dia laid in trenches for cable protection complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysJul 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 days