|
| 1 | Demolition of reinforced cement concrete in any position and any description including cutting of reinforcement bars to facilitate demolition complete all as specified and as directed. |
| 2 | M&L for RCC type B1 (1:2:4) using 20 mm graded stone aggregate as in slabs support on walls beam, & column in floors, roof, lobby, balcony, deck slab and in shelves and the like complete all as specified and as directed.Note: Reinforcement shall be measured and paid separatly under relevant item of this schedule. |
| 3 | M&L for mild steel TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 4 | M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed. |
| 5 | Raking out joints/ pointing to brick work built with cement mortar in walls or to bricks on edge/ flat in floors, surface channels, roofs etc complete all as specified and as directed. |
| 6 | M&L for flush point to brick laid on edge in paving in cement mortar 1:3 complete all as specified and as directed. |
| 7 | M&L for flush point to brick laid on flat in paving in cement mortar 1:3 complete all as specified and as directed. |
| 8 | Demolition of brick work built in cement mortar of any description,etc complete all as specified and as directed. |
| 9 | M&L brickwork with fly ash bricks straight or curved on plan exc 6mtr mean radius built in cement mortar 1:6 by using old size bricks complete all as specified and as directed. |
| 10 | All as per item No 9 above but, wihout bricks complete all as specified and as directed.(Serviceable bricks obtained from item No. 8 here-in-above). |
| 11 | Dismantling of brick (laid flat or on edge) or brick tiles in floors, channels kerbs, aprons, etc laid dry and pointed in cement mortar complete all as specified and as directed. |
| 12 | M&L for bricks works with sub class 'B' bricks laid on flat in floors/tappered wall of drain bedded and jointed in cement mortar 1:6 and pointed in cement mortar 1:3 using old size brick complete all as specified and as directed. |
| 13 | All as per item No 12 above but, without brick as in laid flat complete all as specified and as directed. |
| 14 | M&L for bricks works with sub class 'B' bricks laid on edge in floors/tappered wall of drain bedded and jointed in cement mortar 1:6 and pointed in cement mortar 1:3 using old size brick complete all as specified and as directed. |
| 15 | All as per item No 12 above but, except brick as in laid edge complete all as specified and as directed.(Serviceable bricks obtained from item No. 11 here-in-above). |
| 16 | Demolition of cement concrete in ground floors and paving n. exc 15cm thickness (below or above ground level) complete all as specified and as directed. |
| 17 | M&L PCC 1:3:6 type C-2 (with using 40mm graded aggregate) as in saucer drain, storm water drain, bed of drain etc like water throught including forming channels complete all as specified and as directed. |
| 18 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and as directed. |
| 19 | M&L heavy duty 300 x 300mm & 12mm thick anti skid pavement tile (color & Shade as approved) set and jointed in neat cement slurry and pointed in white cement & pigment to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed. Notes:- Design and pattern shall be approved by Engr-in-charge /GE at the time of execution of work. |
| 20 | M&L pre-polished and chemically treated smooth finish exterior grade coloured chequered tile for size 300 mm x 300 mm x 25mm thick, set, jointed and pointed in neat cement slurry in floors including 15mm thick screed bed or bedding layer in cement mortar (1:6) as in path all as complete and as specified and as directed. |
| 21 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. |
| 22 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. |
| 23 | M&L for 75mm thick cement concrete type C-2 1:3:6 with 40mm graded stone aggregate as in sub base to receive a surface complete all as specified and as directed. |
| 24 | M&L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 25 | M&L providing cement concrete type B-1 1:2:4 with 20mm graded aggregate in kerbs, coping etc rounded or chemfered on edge complete all as specified and as directed. |
| 26 | M&L two coats of synthetic enamel (ordinnary tint) of approved colours (Yellow, white, black, red etc) over priming coat on new kerb stone/concrete etc surface of any description over 10cm girth or width, not otherwise described complete all as specified and as directed. |
| 27 | S&F in repairs of reinforced concrete pipes of 450mm dia class NP2 laid and jointed complete with collars including all necessary joints, waste, cutting etc complete all as specified and as directed. |
| 28 | S&F in repair of reinforced concrete pipes of 300mm dia class NP2 laid and jointed complete with collar including all necessary joints, waste cutitng etc complete all as specified and as directed. |
| 29 | M&L PCC 1:3:6 type C-2 (with using 40mm graded aggregate) as in foundation, filling and mass concrete complete all as specified and as directed. |
| 30 | Taking down cement plaster on wall of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 31 | M&L for 15mm thick rendering in cement mortar (1:4) on fair faces of brick walls or concrete surfaces in mixed with water proofing compound by weight of cement or as per manufacturer instruction, finished even & fiar without using extra complete all as specified and as directed. |
| 32 | M&L for preparation of newly wall plastered surfaces and applying three coats of white wash on wall to match the existing colour complete all as specified and as directed. Please Enable Macros to View BoQ information |
