Tender For Certain B/R Repair And Allied Services In Otm Accn At Nc Pro Unit Arty Klp, 1988 Med Bty, 151 Ta Jat & Other Places Under Ge(South) Udh Ur
Tender Value
40 Lakhs
Estimated cost
Bid Submission
09 Jul 2026
4 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Reasi → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain B/R Repair And Allied Services In Otm Accn At Nc Pro Unit Arty Klp, 1988 Med Bty, 151 Ta Jat & Other Places Under Ge(South) Udh Ur
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 01-Jul-2026 | REVISED BOQ | BOQ | 09-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: MILITARY ENGINEERING SERVICES (GE (SOUTH) UDHAMPUR) NAME OF WORK : CERTAIN B/R REPAIR AND ALLIED SERVICES IN OTM ACCN AT NC PRO UNIT ARTY KLP, 1988 MED BTY, 151 TA JAT & OTHER PLACES UNDER GE(SOUTH) UDHAMPUR Contract No: GE/S(U)-67/2025-26 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words |
| 2 | Cleaning and removing all scale and dirt with high pressure descaling pumps and removing the dirt with vacuum suction pump without entring inside the tank, etc with chlorine or bleeching, from PVC water storage tank of any capacity exc 250 and n.exc 1000 ltrs without dismantling the tank and from mouths of circulating pipes, etc incl writting \\"Tank Cleaned on ____\\" indicating the date, month & year of cleaning on external wall of tanks with synthetic enamel paint and stainsils complete all as specified and directed by Engr-in-charge. |
| 3 | Taking down cement plaster from brick/concrete surfaces including raking out joints, hacking for key and scrubbing down with water etc all as specified and directed by Engr-in-charge. |
| 4 | Taking down eaves gutters and and rain water pipes (any size or pattern ), including all fittings incl removal of store and sold to contractor through credit. |
| 5 | Taking down chowkats or frames of any description with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm but n exc 4 sqm each all as specified and directed by Engr-in-charge. and making good the disturbed plastered surfaces with 10 mm plaster in CM 1:6 and final finish as per existing. |
| 6 | Taking down chowkats or frames of any description with shutters (without taking off shutters from the frames) area n exc 1.5 Sqm each all as specified and directed by Engr-in-charge. and making good the disturbed plastered surfaces with 10 mm plaster in CM 1:6 and final finish as per existing. |
| 7 | Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each complete all as specified and directed by Engr-in-charge. |
| 8 | All as per item 98 above but n exc 1 Sqm each complete all as specified and directed by Engr-in-charge. |
| 9 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for all as specified and directed by Engr-in-charge. |
| 10 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) |
| 11 | Demolition of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar as in kitchen platform, floors, aprons etc |
| 12 | Demolition of brickwork or stone/ boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework complete all as specified and directed by Engr-in-charge. |
| 13 | Dismantling cast iron pipe & reinforced concrete drain pipes, jointed in cement mortar of any dia taking out from trenches or fixed to wall upto 100mm complete all as specified and directed by Engr-in-charge. |
| 14 | Dismantling of floor hearth or wall tiling including cement mortor bedding (but not backing ) and rubbish off the premises complete all as specified and directed by Engr-in-charge. |
| 15 | Dismantling wall and ceiling boards, fibre pulp insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed by Engr-in-charge. |
| 16 | Dismantling asbestos cement (corrugated, semi corrugated) etc sheets in roof covering including ridges complete all as specified and directed by Engr-in-charge. |
| 17 | Dismantling wrought iron or mild steel work in any description not otherwise specifically provided for all as specified and directed by Engr-in-charge. |
| 18 | M and L for PCC 1:5:10 type E-2 as in Sunken floor /foundation filling and mass Concrete all as specified and directed by Engr-in-charge. |
| 19 | M&L water proofing treatment to the sunken portion with the removing existing treatment,Demolition including wire brushing and clearing the dust and foreign material etc complete, applying two coat of two component( 1part Polymer and second part cementitions powder) cementitions, polymer modified elastomeric, water proofing coating composed of cement, properly selected and graded aggregates, additive and acrylic emulsion polymer as a binder apply first coat of (mix and application as per manufacturer instruction) all over floor surface / prepared surface and apply to vertical surface up to 15 cm from tilling level, allow to dry 4 to 6 hours. Prepare for apply 2nd coat perpendicular to first coat and allow to dry 4 to 6 hours .All joints of /Trap/WC/Soil pipe shall be Properly sealed with ceiling compound / polymer modified mortar using Dr Fixit Pidicrete URP or equivalent ,Slope of slab shall be towards the Spout of GI pipe 50 mm dia . Provide 15 mm protective screed with cement- sand in 1.3 with WPC ( make: Dr Fixit LW+ or equivalent) within 2 to 3 days of second coat. Complete all as specified as per manufacture instructions/ as per direction of Engineer-in–charge. |
| 20 | M&L Non - Skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) size 300x300x10mm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thich screed bed or bedding layer in cement mortar (1:4) etc complete all as specified and directed by Engr-in-charge. |
| 21 | M&L glazed ceramic coloured tiles 600 x 300 x 8-9 mm thick, digital pattern with dark, light and highlighter combination as in vertical portion such as skirting / dados set and jointed in neat cement slurry and pinted in white or coloured cement to match over 10 mm back coat in CM 1:3 |
| 22 | M&L for Vitrified Ceramic double charged light shade tiles light shade 8-10 mm thick double charged (square/rectengular) polished, area of each tile n. exc 0.36 sqm as in Floar, lining, set and jointed in neat cement slurry and pointed in coloured cement to match the surface over 10mm thick screed bed in CM 1:3 complete all as specified and directed by Engr-in-charge. |
| 23 | -----Ditto ----- but on vertical surfaces as in skirting including 10mm thick rendering as backing coat to receive the tile on fair faces of brick/concrete surfaces In cement Mortar 1:3 and finish even and rough complete all as specified and directed by Engr-in-charge. |
| 24 | M&L for Vitrified Ceramic double charged light shade tiles light shade 8-10 mm thick double charged (square/rectengular) polished, area of each tile exc 0.36 sqm and n. exc .42Sqm as in Floar, lining, set and jointed in neat cement slurry and pointed in coloured cement to match the surface over 10mm thick screed bed in CM 1:3 complete all as specified and directed by Engr-in-charge. |
| 25 | -----Ditto ----- but on vertical surfaces as in skirting including 10mm thick rendering as backing coat to receive the tile on fair faces of brick/concrete surfaces In cement Mortar 1:3 and finish even and rough complete all as specified and directed by Engr-in-charge. |
| 26 | M&L for Machine cut kota stone slab flooring 18-20 mm thick over 20 mm thick cement screed bed in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engr-in-charge. |
| 27 | M&L for 150mm wide strip of makrana white marble 20 mm thick machine cut, over 15mm thick screed bed, bedded jointed and pointed with grey cement slurry including cutting and polishing types complete all as specified and directed by Engr-in-charge. |
| 28 | Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete. |
| 29 | M&L Granite slab 20 mm thick as in pillars, window cill, cooking platform and the like in cement motar 1:4 including painting in white cment 1:2 using marble dust with a mixture of pigment to match the shade of granite including cutting polishing and moulding on edges. |
| 30 | M&L 20 mm thick granite (of any type) tiles machine cut in skirting/ dado/ walling laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 10mm thick back coat in CM 1:3 |
| 31 | Rounding to edges of stone slabs one edge, such as in steps , cooking platform, and other similar situations |
| 32 | Material and labour for suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system) of grid size 600mmx600mm with main runner 38 mm x 24 mm and wall angle 24mm x 24mm using 4mm thick high Pressure Non Asbestos/glass Fiber Cement decorative Board (E-Board Classic) in a grid of GI systtem duly suspended with 4 mm dia GI bar hanger fixed with steel dash fasteners or iron purline from the roof with adjustment clip providing positions for light fixtures, air conditioning diffuser and ducts, sprinkler, smoke detectors etc. The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. The last hanger at the end of each main runner should not be interlocked between main runners @ 610mm c/c, as to form 600 mm x 600 mm grid all as specified and directed. Make : Everest Industries Ltd or equivalent as per IS 14862 all as specified and directed by Engr-in-charge. |
| 33 | S & F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame all as specified and directed by Engr-in-charge. |
| 34 | S & F in repairs solid PVC wall lining consisting of 5mm thick Plain Colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame all as specified and directed by Engr-in-charge. |
| 35 | M&L for pre painted galvalume aluminium zinc coating GI based corrugated sheets 0.5 mm thick of any colour having tensile strenght of 550/MPA as in roof covering, cladding to wall fixed with self taping screws complete all as specified and directed by Engr-in-charge. |
| 36 | M & L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed by Engr-in-charge. |
| 37 | S & F Fe 410 W (Gde E 250 Quality A) Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates |
| 38 | S&F welded steel wire fabric mesh weight n.exc 4 Kgs per sqm fixed to steel members |
| 39 | M&L for rendering 15 mm thick in cement mortar 1:4,on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete.Note : Liquid WPC will be measured and paid separately. |
| 40 | Material and labour for 10mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces including finishing even and smooth without using extra cement complete all as specified and directed by Engr-in-charge. |
| 41 | M&L for Rendering 5 mm thick on brick or concrete surface as in ceiling in cement mortar 1:3 finished even and smooth without using extra cement all as specified and directed by Engr-in-charge. |
| 42 | Supply only water proofing compound (liquid),ISI marked. |
| 43 | Preparation of new plastered surfaces of wall and applying two coats of cement based paint including over a coat of chalk whiting primer |
| 44 | Preparation of new plastered wall surfaces and applying two coats of oil bound distemper white or tinted with roller application over a coat of chalk whitening primer over 3mm thick wall care putty complete all as specified and directed by Engr-in-charge. |
| 45 | M&L for preparation new surfaces plastered or unplastered and applying three coats of white wash on ceiling all as specified and directed by Engr-in-charge. |
| 46 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. |
| 47 | M & L for Brushing neat cement slurry with 3.0kg of cement per sq. metre |
| 48 | M & L for providing, cement concrete type B0 1:2:4 (12.5 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges |
| 49 | M & L for rendering 5 mm thick on fair faces of concrete surface in CM 1:3 finished even and smooth without using extra cementmixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete.Note : Liquid WPC will be measured and paid separately. |
| 50 | Material and labour for cleaning the entire roof surface thoroughly to remove all loose particles, dust/dirt particles and applying with One coat of industrial bitumen 85/25 grade at the rate of 1.20 Kg/Sqm over the plastered surfaces of roof all as specified and directed by Engr-in-charge. |
| 51 | Material and labour for Applying a coat of bituminous aluminium paint @0.10kg/Sqm as weather proof coat all as specified and directed by Engr-in-charge. |
| 52 | Material and labour for 3mm thick APP based polymeric membrane minimum weighing 3 kg/sqm non-woven polyester reinforcement polymeric water proofing membrane (wt not less than 150 gms/sqm) laid on primed surfaces by gas flame torch application and apply one coat of industrial bitumen 85/25 grade at the rate of 1.20 Kg/Sqm over APP Memberence complete all as specified and directed by Engr-in-charge.Note :- Water proofing treatment will be done by IWL or through a specialized agency which will further have to give a five years warranty for rectification of any defect if incurred at a later stage, otherwise no payment shall be made to the contractor if water proofing treatment is executed by engaging local labour. |
| 53 | M&L PCC 1:4:8 type D-2 (using 40mm graded crushed stone agg) as in fdn filling and mass concrete completed all as specified and directed by Engr-in-charge. |
| 54 | M&L walling of random rubble uncoarsed well bonded, bedded and solidly hearted built in CM 1:6 complete all as specified and directed by Engr-in-charge. |
| 55 | All as per item No 53 above but except stone. |
| 56 | M&L for Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6. |
| 57 | M&L brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:6 but except bricks all as specified and directed by Engr-in-charge. |
| 58 | Rotational moulded (three layered as per IS 12701) polyethylene water storage tank (cylindrical vertical with closed threaded top) hoisted and fixed in position including connecting inlet/outlet pipe connecting with necessary fittings all as required at site and specified in SSR part -I of capacity 1000 litres including all accessories {i.e GI nipples and Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of bore 20mm (Minimum weight 210 gram) etc}, and dismantling of old UNSV water tank of same capacity all as specified and directed by Engr-in-charge. (Make- Sintex/ Rotex five star) |
| 59 | All as per item No 57 above but 500 ltr capacity water storage tanks |
| 60 | S&F Automatic water level control valves PTMT of size 20mm bore dia high pressure of with polyetylene float and flynut screwed for iron pipe and fixed including necessary fitting as required at site in repair complete all as specified and directed by Engr-in-charge. |
| 61 | Supply and fix in repairs Bib tap 15 mm bore, brass, chromium plated, fancy type with crutch or butterfly handle conforming to IS screwed down, screwed for iron pipes or for brass ferrule complete all as specified and directed by Engr-in-charge. |
| 62 | S&F in repairs bib Tap of PTMT (Make-Prayag or equivalent) any colour 15mm dia complete all as specified and directed by Engr-in-charge. |
| 63 | Supply and fixing \\"as in repair\\" stop valves/angle valve of 15 mm bore, but fancy type, chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions including necessary fitting as required at site complete all as specified and directed by Engr-in-charge. |
| 64 | S&F as in repairs fancy type single lever basin mixer Pillar tap, cast copper alloy, with capstan heads, chromiuk plated, screwed down high pressure with or without lettered \\"HOT\\" or \\"COLD\\" with long screwed shanks and fly nuts, screwed for iron pipe of bore 15mm complete all as specified and directed by Engr-in-charge. |
| 65 | S&F in repairs CP Soap dish all as specified and directed by Engr-in-charge. |
| 66 | S&F for Shower roses 15 mm chromium plated with or without swivel joints, any size, including 125 mm long arm and fixing to steel pipe or union, complete all as specified and directed by Engr-in-charge. |
| 67 | S & F in CP health faucet with 8mm dia 1.00m long flexible tube and wall hook with all accessories all as aproved by Engr-in-charge. |
| 68 | S&F in repair Waste coupling of PTMT for 32mm dia discharge pipe (half or full threaded) (Minimum weight 32mm 45gms/ 40mm-60 gms) complete all as specified and directed by Engr-in-charge. |
| 69 | Taking up or down 15 mm bore steel tubing with connections for cleaning for refixing or removing to store yard complete all as specified and directed by Engr-in-charge. |
| 70 | Taking up or down 20 mm bore steel tubing with connections for cleaning for refixing or removing to store yard complete all as specified and directed by Engr-in-charge. |
| 71 | M & L galvanised steel 15 mm dia water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specified and directed by Engr-in-charge. |
| 72 | M & L galvanised steel 20 mm dia water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specified and directed by Engr-in-charge |
| 73 | Refixing old steel 15 mm bore water tubing medium grade galvanised and connections in new or old position (walls, ceiling, floor etc.) complete all as specified and directed by Engr-in-charge. |
| 74 | Refixing old steel 20 mm bore bore water tubing medium grade galvanised and connections in new or old position (walls, ceiling, floor etc.) complete all as specified and directed by Engr-in-charge. |
| 75 | S&F in repair PVC connection 15mm bore with ptmt nuts of length 450mm |
| 76 | S & F in repairs 600 mm X 400 mm bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial Ply 3wood and fixed to wooden plugs with chromium Plate brass screws and cap washers complete all as specified and directed by Engr-in-charge. |
| 77 | S&F in repairs viterious china urinals half stall white incl CP urinal Spray Nozzal complete incl providing and fixing of plug bedding urinal against wall in cement motor 1:2 securing urinal to plug with and incl 60mm long brass screws, pointing around urinal back in cement complete all as specified and directed by Engr-in-charge., |
| 78 | Supply and fix in repairs vitreous china wash hand basin white flat back size 550x400mm excluding taps waste chain and plug and porcelain stopper but including brackets waste fitting brass chromium plated 32mm dia with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed etc complete all as specified and directed by Engr-in-charge. |
| 79 | S&F in repair table top wash hand basin size: 820x450x150 mm complete all as specified and directed by Engr-in-charge.. |
| 80 | Supply only flush pipe of PVC 32 mm dia for low level cistern. all as specified and directed by Engr-in-charge. |
| 81 | S&F in repair water closet white vitreous china ware Orissa pattern of size 580x440mm with integral foot rest ‘P’ or ‘S’ trap 100mm dia front or back inlet incl provision of PCC bedding type B1, 1:2:4 ( 20 mm graded aggregate) and connection pipes ( excluding flushing cistern but including flushing pipe 32 mm dia MS chromium plated) (rate also include for taking off unhygienic of WC). |
| 82 | S&F in repairs vitreous China wash down water closet pan pedestal pattern, white (excluding fixing bolts, flushing cistern and flush pipe) with P or S trap but including plastic water closet seal, seat cover ,white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device including connection to drain and flush pipe complete all as specified and directed by Engr-in-charge. |
| 83 | S&F 10 ltr capacity PVC valveless, syphonic action type flushing cistern low level white with inlet, ball valve, float and handle including connetion to pipe but fixed in repair complete all as specified and directed by Engr-in-charge.. |
| 84 | S&F in repair CP tubular towel rail , 600mm long between flanges aluminium anodised, fixed with rawl plugs complete all as specified and directed by Engr-in-charge. |
| 85 | S&F in repairs stainless steel peg set of six as per sample complete all as specified and directed by Engr-in-charge.. Make Prayag |
| 86 | PVC (SWR) pipes 110mm bore type-B ( Wall thickness 4 to 5 mm) single socketed , in any length with rubber ring joints s, laid in trenches or in floors |
| 87 | PVC (SWR) pipes 75mm bore type-B ( Wall thickness 4 to 5 mm) single socketed , in any length with rubber ring jointss, laidin trenches or in floors |
| 88 | PVC (SWR) pipes 110mm bore type-B ( Wall thickness 4 to 5 mm) single socketed , in any length with rubber ring joints fixed to wall |
| 89 | PVC (SWR) pipes 75mm bore type-B ( Wall thickness 4 to 5 mm) single socketed , in any length with rubber ring joints fixed to wall |
| 90 | S&F PVC (SWR) type-B ( Wall thickness 4 to 5 mm) bend any radius for 110mm bore pipe |
| 91 | S&F PVC (SWR) type-B ( Wall thickness 4 to 5 mm) bend any radius for 75mm bore pipe |
| 92 | S&F 75mm PVC floor traps with grating including jointing to waste pipe fixed cncrete type B1 (1:2:4). complete all as specified and directed by Engr-in-charge.(ISI Mark) |
| 93 | S&F PVC (SWR) type-B ( Wall thickness 4 to 5 mm) branch piece single (single Y ) equal or unequal for 110mm bore pipe |
| 94 | S&F PVC (SWR) type-B ( Wall thickness 4 to 5 mm) branch piece single (single Y ) equal or unequal for 75mm bore pipe |
| 95 | S&F PVC (SWR) type-B ( Wall thickness 4 to 5 mm) junction single (single T ) equal or unequal for 100mm bore pipe |
| 96 | S&F PVC (SWR) type-B ( Wall thickness 4 to 5 mm) junction single (single T ) equal or unequal for 75mm bore pipe |
| 97 | S&F PVC Reducer 75 mm for connecting and fixing gas pipe on walls as in repairs complete all as specified and directed by Engr-in-charge. |
| 98 | S& F 110 mm bore PVC SWR bends and fixed with joint sealent etc complete all as specified and directed by Engr-in-charge. |
| 99 | S&F 110mm Pvc (SWR) pipes single/Double socketed of any length with rubber ring joints pressure rating 4 kg/cm2 fixed to wall incl clamp etc complete all as specified and directed by Engr-in-charge. |
| 100 | S&F PVC (SWR) reducers for100mm bore pipe |
| 101 | S&F PVC (SWR) type-B ( Wall thickness 4 to 5 mm) reducers for75mm bore pipe |
| 102 | S&F in repairs grating doom 100mm dia of PTMT(Minimum weight 25 gms) |
| 103 | Refixing of shutter of any description exc 1 sqm and n exc 2 sqm in same opening complete. |
| 104 | Refixing of shutter of any description n exc 1 sqm in same opening complete. |
| 105 | S&F Solid PVC door frame of size 50mm x47mm made out of 5mm plain clour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing |
| 106 | S&F Factory made solid panel PVC Moulded door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. Clause No. 8.B.1 to 8.B.10 and drawing on page No. 156 & 157 of MES SSR-2010 Part-II complete all as specified and directed by Engr-in-charge. |
| 107 | S&F Pressed steel frames (Factory made) made out of 1.25 mm thick black MS sheet for doors, with one or more rebates including necessary fixing lugs, Butt hinges, lock strike plate, etc complete, size of frame 105x60mm incl bottom of each chowkat complete all as specified and directed by Engr-in-charge.. |
| 108 | S&F Pressed steel frames (Factory made) made out of 1.25 mm thick black MS sheet for doors, with one or more rebates including necessary fixing lugs, Butt hinges, lock strike plate, etc complete, size of frame 125x60mm incl bottom of each chowkat complete all as specified and directed by Engr-in-charge.. |
| 109 | S&F flush shutter, 35 mm thick, solid core construction with block board core, and ply wood face panels but one face is covered with decorative laminate face veneer with lipping complete all as specified. Make : Century Plywood/Kit Ply/Archidply or equivalent |
| 110 | Supply and fix 35mm thick second class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats |
| 111 | S&F steel window (box type) with gauzed shutter factory made with side hung shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all as specified and directed by Engr-in-charge..Note : (i) The window shall be fabricated as per Drg No CEUZ/TD/1551/15 Sheet 1/3 to 3/3 (ii) MS fillets, glazing, wire gauge,Glass shall be measured and paid separately. |
| 112 | Description all as per Srl Item No 107 here in before but without glazing bar complete all as specified and as directed.Note : (i) The window shall be fabricated as per Drg No CEUZ/TD/1551/15 Sheet 1/3 to 3/3 (ii) MS fillets, glazing, wire gauge shall be measured and paid separately. |
| 113 | S&F Factory made mild steel ventilators box type with upper top hung with glazed and gaused shutters and bottom openable,locking arrangements type shutters including pintol hinges,steel peg stay and one shop coat of red oxide primer complete all as specified and directed by Engr-in-charge.Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1302/2009 Sheet 1/3 to 3/3 ii) , Glazing, wire gauge and Glass shall be measured and paid for separately. |
| 114 | S&F Factory made mild steel ventilators box type with upper top hung with glazed and gauzed shutters and bottom openable type,locking arrangements shutters including pintol hinges,steel peg stay and one shop coat of red oxide primer complete all as specified and directed by Engr-in-charge..(without frame but frame to be made along with door)Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1302/2009 Sheet 1/3 to 3/3 ii) , Glazing, wire gauge and Glass shall be measured and paid for separately. |
| 115 | Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks,cup Board etc and similar work conforming to Fe 290 Gd E-165 complete all as specified and directed by Engr-in-charge. |
| 116 | S & F powder coated Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engr-in-charge. |
| 117 | S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 118 | S & F in repairs double action floor spring for aluminium doors hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including necessary cutting and making good to floor as per existing complete all as specified and directed by Engr-in-charge.. |
| 119 | S&F in repair door closer hydraulically regulated, aluminium (extruded section) body, designation No.2, universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg etc complete all as specified and directed by Engr-in-charge. |
| 120 | M&L PCC 1:3:6 type C1 (20mm graded aggregates) as in bed blocks for hold fasts including necessary form works. |
| 121 | Material and labour for plain cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregates as in filling of pressed steel door frame all as specified and directed by Engr-in-charge. |
| 122 | Supply and fix galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples |
| 123 | Supply and fix in repairs galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples |
| 124 | Supply and fix 100mm size butt hinges, medium weight, cold rolled complete all as specified and directed by Engr-in-charge. |
| 125 | Supply and fix 150mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engr-in-charge. |
| 126 | Supply and fix 100mm powder coated aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engr-in-charge.. |
| 127 | Supply and fix 100 mm door handle, Extruded aluminium alloy handles, fabricated type,anodised complete all as specified and directed by Engr-in-charge. |
| 128 | Supply and fix 300mm long Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts andsliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engr-in-charge.. |
| 129 | S & F of 150 mm size (Overall length of cover plate) floor door stopper of aluminium body and tongue, anodised, with hard drawn steel spring complete all as specified and directed by Engr-in-charge. |
| 130 | S & F in repairs Mortice lock, brass, vertical type, size 100 mm 4 levers with 02 Nos keys all as specified and directed by Engr-in-charge. |
| 131 | S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete |
| 132 | S&F Stainless steel curtain rod of 25mm dia , chromium plated with model of 304 stainless steel, heavy duty of thickness of wall 1-2 mm with fixing brackets, stops rollers etc. |
| 133 | Hacking out old boken glass(any thickness, size, quality or description) from wooden frames/steel frames glazed with oil putty or fixed with beads complete. |
| 134 | S&F 5.5 mm thick sheet glass ordinary quality and glazing with rubber beading exc 0.5 Sqm each pane complete all as specified and directed by Engr-in-charge. |
| 135 | Supply and fix 4mm thick sheet glass, ordinary quality and glazing with rubber beading around the glass, in squares n exc 0.50 sqm in each pane complete all as specified and directed by Engr-in-charge. |
| 136 | Supply and fix 4mm thick sheet glass, frosted or grounded on one side with rubber beading around the glass, in squares n exc 0.50 sqm |
| 137 | Preparation of new steel surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel painting complete all as specified and directed by Engr-in-charge. |
| 138 | Preparation of new steel surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel painting over a coat of red oxide primer complete all as specified and directed by Engr-in-charge.. |
| 139 | Material and labour for one coat of synthetic enamel painting on old painted wooden surfaces of any description, not otherwise described over 10cm width or girth including preparation complete all as specified and directed by Engr-in-charge.. |
| 140 | Preparation of new wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel painting over a coat of pink primer complete all as specified and directed by Engr-in-charge. |
| 141 | Material and labour for preparation of old decorated wall surfaces by washing rubbing down and stopping of distempered surfaces and filling the nail holes by white cement and applying one coat of oil emulsion distemper white or tinted with roller application complete all as specified and directed by Engr-in-charge.. |
| 142 | Material and labour for preparation of old decorated surfaces of walls by by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent walls and trading oil and greasy spots and applying one coat of cement based paint white or tinted complete all as specified and directed by Engr-in-charge.. |
| 143 | M&L for preparation Old surfaces including complete Removal of existing surface of white wash and applying two coats of white wash on ceiling all as specified and directed by Engr-in-charge. |
| 144 | M&L for preparation Old surfaces including complete Removal of existing surface and applying two coats of Oil Bond distemper over a layer of brila white putty on walls all as specified and directed by Engr-in-charge.. |
| 145 | M & L for applying Two or more coats of 100% Premium acrylic emulsion paint on external surface having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. |
| 146 | M&L for 18/19 mm thick HDHMR board, exterior grade , prelaminated one side with decorative choice lamination and other side balancing white lamination , fixed with screws to timber frame work complete all as specified and directed by Engr-in-charge. |
| 147 | S&F continuous (piano) hinges, mild steel,bright finishor electrogalvanised width of flaps (when open) 30 mm complete all as specified and directed by Engr-in-charge.. |
| 148 | Material and labour for plain cement concrete type E-2, 1:5:10 (Using 40mm graded stone aggregates) as in sub base complete all as specified and directed by Engr-in-charge.. |
| 149 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using platevibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; |
| 150 | M&L for Durastone heavy duty vitrified tiles 10 mm thick Sq/rectangular tiles area of each tile not esceeding 0.36 Sqm as in floors set and jointed in neat cement slurry and pointed in clooured cement to match the surface over 15mm thick screed bed in CM 1:4 complete all as specified and directed by Engr-in-charge... |
| 151 | M & L PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) as in coping, edging concrete incl necessary formwork, weathering, slightly rounded or chamfered angles all as specified and directed by Engr-in-charge. Total in Figures 0.0 0.0 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 09, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysJul 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender