Tender For Repair / Replacement To View Cutter, Concertina Coil, Barbed Wire And Repair / Replacement To Tank Staging, Plumbing And Other Misc Works At Old Air Field Under Ge 970 Ews.
Tender Value
44.51 Lakhs
Estimated cost
Bid Submission
09 Jul 2026
0 days left
EMD
89500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Budgam → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Replacement To View Cutter, Concertina Coil, Barbed Wire And Repair / Replacement To Tank Staging, Plumbing And Other Misc Works At Old Air Field Under Ge 970 Ews.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level)complete all as specified and as directed. |
| 2 | M&L 75 mm thick PCC (1:4:8 ) type D-2 as in sub base finished even and rough complete all as specified and as directed. |
| 3 | M&L Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern (glossy finish) conforming to IS-15658-2006 as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed. |
| 4 | M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick with glossy finish, set, jointed & pointed in neat cement slurry in floors with grey cement & pigment over 15mm thick screed in CM(1:4) including dismantling of previous one complete all as specified and as directed. |
| 5 | M&L for PCC 1:2:4 type B-0, using 12.5 mm graded agregate as in copings complete all as specified and as directed.. |
| 6 | Dismantling posts or struts (wood, Steel or RCC) any section including taking out embedded portion and maiking good disturbed ground complete all as specified and as directed. |
| 7 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed |
| 8 | Dismantling old Chain link fencing of any description fixed to any type of fencing posts complete all as specified and as directed by Engineer-in-Charge. |
| 9 | Supply mild steel galvanized chain link fencing 3.15mm dia of mesh wire, mesh size 75x75mm with straining bolts, 10mm dia round bars with 0.9mm dia MS binding wire, flat iron fillets (for securing wire mesh etc), binding and jointing complete, including necessary drilling, bolting or revetting etc, complete all as specified and as directed. Note:- Flat iron, round bars, nut bolts and washer shall be measured and paid for separately as supply only. |
| 10 | Fixing only chain link fencing including line wire, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire compete all as specified and as directed. |
| 11 | S&F mild steel work as in angle iron in posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, and similar works conforming to Grade E-165 (Fe 290), complete, all as specified & directed. |
| 12 | Supply only mild steel round bars of 10 mm dia and over conforming to Grade E-165 (Fe 290) for fixing in chain link wire fencing , complete all as specified & directed. |
| 13 | Supply only MS flat iron,round or square bars conforming to Grade E-165 (Fe- 290) for fixing chain link fencing, acomplete all as specified and as directed. |
| 14 | S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm but not exc 10 cm long and dia of neck 5 to 10 mm, complete all as specified & directed. |
| 15 | Dismantling steel barbed wire of any description fixed to any type of fencing posts complete all as specified and as directed by Engineer-in-Charge. |
| 16 | S&F galvanised 2 strand, steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc as directed. Note :- Each line of horizontal / vertical / diagonal wire to be measured for the purpose of payment. |
| 17 | Dismantling Concertina wire fencing of any description fixed to any type of fencing posts complete all as specified & directed. |
| 18 | S&F in repair CONSEC-ZAL Super Razor punched barp tap (SRPBT) Aluminium based helix coil with and including necessary GI fixing clips for securing complete all as specified and directed with following specifications:- (i) Dia of coil (when unstretched) -610 mm (ii) No of circles-51 turns per coil (iii)Weight of each coil with hessian pack 8.50 Kg + 0.50 Kg (iv) Coverage per coil-8RM (v) Central core wire:- Made from 2.50 mm dia GI-H.T.S.S wire as per IS-4454 galvanised as per IS-2629 (vi) Razor punched strip:- Razor punched tape is CONSEC -ZAL steel comprising of Aluminium base with Zinc alloy coating@ 150gm/Sqm conforming to ASTM A-792/A-792 M with additional primer treatment of Epoxy/ Polyurethane & Final Paint Top coat of Caulfield green shade (BSL 139) by Hot Dipping Process complete all as specified & directed by Engineer-In-Charge. Note:-Running length of the wall shall be measured for payment purpose) |
| 19 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed |
| 20 | Material & Labour for brick work with sub class `B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 21 | M&L for rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces finished even and fair complete all as specified. |
| 22 | M&L for preparation of newly plastered surfaces of wall applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed |
| 23 | M&L for Plain cement concrete (1:2:4), type B1 using 20mm graded crushed stone aggregate as in coping, bed plates, pintle blocks, anchorage blocks for hold fast etc. including necessary formwork wherever required, complete, all as specified and directed. |
| 24 | M&L for PCC 1:3:6 type C-2 (using 40mm graded stone agg) as in foundation filling and mass concrete complete all as specified and as directed.. |
| 25 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar roof coverings complete all as specified and directed. |
| 26 | S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge. |
| 27 | S&F 2mm thick Fibre glass reinforced translucent plain sheeting with fixed with coach screw and washer in roof, wall etc by Engr-in-Charge. |
| 28 | M&L for two coats of synthetic enamel painting over a coat of red oxide zinc chrome primer on new steel surfaces over 10cm width or girth including preparation of surface complete. |
| 29 | Dismantling timber scantlings 40 Sqcm and over in section, in any position unframed work complete, all as specified and directed . |
| 30 | S&F rolled sections as in main and cross beams, hip and jack rafters; purlins, staging for water tank where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed |
| 31 | S&F in repair rotational moulded polythene water storage tank 500 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I with and including dismantling water tank of capacity exceeding 250 liters but not excedding 500 Ltrs and including 20mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule & nipple suitable for HDPE water tank (Min weight 15mm-38 gms/20mm-45gms/25mm-65gms) complete, all as specified and directed by Engr -in-Charge. |
| 32 | S&F in repair rotational moulded polythene water storage tank 1000 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I with and including dismantling water tank of capacity exceeding 500 liters but not excedding 1000 Ltrs and including 20mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule & nipple suitable for HDPE water tank (Min weight 15mm-38 gms/20mm-45gms/25mm-65gms) complete, all as specified and directed by Engr -in-Charge. |
| 33 | S&F in repair 15 mm dia steel water GI tube medium grade with all fittings and fixed with walls, ceilings or laid in floors complete with and including taking up or down 15 mm bore steel water tubing and connections complete all as specified and directed by Engr-in-Charge. |
| 34 | S&F in repair 20 mm dia steel water GI tube medium grade with all fittings and fixed with walls, ceilings or laid in floors complete with and including taking up or down 20 mm bore steel water tubing and connections complete all as specified and directed by Engr-in-Charge. |
| 35 | Notes :- Amount of Credit Schedule for Schedule 'A' Part-ll shall be deducted from total quoted amount of BOQ to arrive at the contract sum. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender