Tender For Welcome Maintenance Of Offrs Md Accn Infront Of Lehl Marg Area In Central Zone Under Ge (North) Binnaguri
Tender Value
44 Lakhs
Estimated cost
Bid Submission
18 Jul 2026
13 days left
EMD
88000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalpaiguri → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Welcome Maintenance Of Offrs Md Accn Infront Of Lehl Marg Area In Central Zone Under Ge (North) Binnaguri
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 30-Jun-2026 | Date Corrigendum | Date | 18-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on wall & ceiling of any description including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed. |
| 2 | M&L 15 mm thick rendering in cement mortar 1:6 on other than fair face of brick work or concrete surface finished even & fair (without using extra cement) complete all as specified and as directed. |
| 3 | M&L for 15mm thick rendering in cement mortar (1:4) on fair faces of brick walls or concrete surfaces in two layers (10mm & 5mm) mixed with water proofing compound by weight of cement or as per manufacturer instructions, finished even & smooth without using extra cement all complete all as specified and as directed. Note. Liquid water proofing compound will be measured and paid separtely. |
| 4 | Supply only Liquid water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed. |
| 5 | M&L rendering 5mm thick plastering in CM (1:3) on ceiling, soffits of slabs, chajjas, columns and beams etc and finished the plastered surface even and smooth without using extra cement , complete all as specified and as directed. |
| 6 | M&L preparing newly plastered or unplastered surface of ceiling and applying three coats of white washing complete all as specified and as directed. |
| 7 | M&L preparation of newly plastered surfaces on wall / ceiling / chajjas and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 Ltre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new surfaces as per the manufacturer instruction complete all as specified and as directed. |
| 8 | M&L preparation new internal wall surfaces and apply two coats of 1st quality acrylic distemper (ready mixed) having VOC content less than 50gms/ltr of approved shade and colour over a coat of primer complete all as specified and as directed. |
| 9 | M&L preparation of old treated surface of ceiling by brooming down or steel wire brushing; scrapping down smoke root, moulds, moss and efflorescent salts and treating oil and greasy spots and applying two coat of white wash on old decorated surfaces of wall including washing froors, cleaning glass, joinery, electrical fittings, wiring etc of drops and splashes complete all as specified and directed. |
| 10 | M&L preparation of old treated surface of wall by brooming down or steel wire brushing; scrapping down smoke root, moulds, moss and efflorescent salts and treating oil and greasy spots and applying two coat of white wash on old decorated surfaces of wall including washing froors, cleaning glass, joinery, electrical fittings, wiring etc of drops and splashes complete all as specified and directed. |
| 11 | M&L preparation of old surfaces of walls by washing, rubbing down and stopping of distempered and painted surfaces and distempering walls by applying one coat of acrylic based distemper emulsion of any tint/shade with roller including wall putty / white cement wherever required to fill the wall cracks/holes complete all as specified and as directed. |
| 12 | M&L preparation of old surfaces of walls by washing, rubbing down and stopping of distempered and painted surfaces and distempering walls by applying two coat of acrylic based distemper emulsion of any tint/shade with roller including wall putty / white cement wherever required to fill the wall cracks/holes complete all as specified and as directed. |
| 13 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and as directed. |
| 14 | M&L non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but n. exc. 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in whiter or coloured cement to match as in floor over and including cement screed bed / backing layer of 15mm thick in cement mortar (1:6) complete all as specified and as directed.Note:- Design and pattern shall be approved by Engr-in-charge /GE at the time of execution of work. |
| 15 | M&L for 15-18 mm thick Granite work ( table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar ( 1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick screeding in cement mortar 1:4 including full rounding the exposed surfaces and provision of holes for LPG gas pipe etc complete all as specified and as directed. Note: (a)Granite colour shall be approved by Engr-in-charge /GE at the time of execution of work. |
| 16 | M&L glazed ceramic coloured / digital printed/Elevation tiles of size 300 x 450 mm x 7 mm thick ) as in vertical surfaces of walls such as skirting/dado / riser to steps etc conforming to IS - 13712 grade IB-III set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including cement screed bed / backing layer of 10mm thick in cement mortar (1:4) complete all as specified and as directed.Note:- Design and pattern shall be approved by Engr-in-charge /GE at the time of execution of work. |
| 17 | M&L Vitrified Ceramic tiles light shade 8-9 mm thick (square/ rectangular) polished, area of each tiles n.exc 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles as in floor over and including cement screed bed / backing layer of 15mm thick in cement mortar (1:6) complete all as specified and as directed. Note:- Design and pattern shall be approved by Engr-in-charge /GE at the time of execution of work. |
| 18 | M&L Vitrified Ceramic tiles light shade 8-9 mm thick (square/ rectangular) polished, area of each tiles n.exc 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles as in floor over and including cement screed bed / backing layer of 10mm thick in cement mortar (1:4) complete all as specified and as directed. Note:- Design and pattern shall be approved by Engr-in-charge /GE at the time of execution of work. |
| 19 | M&L Vitrified Ceramic tiles light shade 8-9 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but n. exc 1.00 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles as in floor over and including cement screed bed / backing layer of 15mm thick in cement mortar (1:6) complete all as specified and as directed. Note:- Design and pattern shall be approved by Engr-in-charge /GE at the time of execution of work. |
| 20 | M&L Vitrified Ceramic tiles light shade 8-9 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but n. exc 1.00 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles as in floor over and including cement screed bed / backing layer of 15mm thick in cement mortar (1:4) complete all as specified and as directed. Note:- Design and pattern shall be approved by Engr-in-charge /GE at the time of execution of work. |
| 21 | Demolition of cement concrete (unreinforced) in ground floor and paving n exc 15cm thickness (below or above the ground level) complete all as specified and directed |
| 22 | M&L 75mm thick cement concrete (1:3:6) type C-2( using 40mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and as directed. |
| 23 | Taking down chowkats or frames exc 1.5 Sqm but n.exc 4 Sqm (without taking off shutter from the frame) each including Builders Hardware complete all as specified and as directed. |
| 24 | Taking down chowkats or frames n. exc 1.5 Sqm (without taking off shutter from the frame) each including Builders Hardware complete all as specified and as directed. |
| 25 | Taking down shutters of any description exc 1 Sqm and n.exc 2.00 Sqm each including Builders Hardware and complete all as specified and as directed. |
| 26 | S&F 1.25mm thick MS sheet factory made Pressed steel frames confirming to IS, having profile of size 125 x 60 mm, doors with one or more rebates including necessary supply and fixing lugs, lock strike plate, etc. 100 mm size hinges, with one shop coat of zinc chromate primer and fixing complete all as specified and as directed. |
| 27 | S&F 1.25mm thick MS sheet factory made Pressed steel frames confirming to IS, having profile of size 105 x 60 mm, doors with one or more rebates including necessary supply and fixing lugs, lock strike plate, etc. 100 mm size hinges, with one shop coat of zinc chromate primer and fixing complete all as specified and as directed. |
| 28 | M & L providing plain cement concrete type C-1, 1:3:6, (using 20 mm graded stone aggregate), as in copings, bed block for filing hollow space of steel chowkhats, fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and as directed. |
| 29 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixed in opening as specified in SSR Part I, Section 8 complete all as specified and as directed. |
| 30 | S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, wood free EPS as per specifications and drawing as specified in SSR Part I, Section 8 complete all as directed. |
| 31 | S&F 30mm thick hard wood factory made flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 32 | S&F factory made 35mm thick 2nd class hard wood factory made, plain, framed, panelled shutter (two panel) with lock rails and panel of 9mm BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 Part-1 klin seasoned and chamicaly pressure treated complete all as specified and as directed. |
| 33 | M&L taking down and Refixing of shutter exc 1 Sqm but n. exc 2 Sqm after necessary repairs in the same opening complete all as specified and as directed. |
| 34 | S&F 10mm stainless steel butt hinges, medium weight cold rolled complete all as specified and as directed. |
| 35 | S&F 150mm long stainless steel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 36 | S&F 100mm long stainless steel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 37 | S&F stainless steel type handle 150mm long complete all as specified and as directed. |
| 38 | S&F stainless steel type handle 100mm long complete all as specified and as directed. |
| 39 | S&F for stainless steel , sliding door bolt of 300mm long bolt plate type decorative with bright bolt not less than 12mm dia with and incl min of 6 bolts and nuts , four on bolt plate and two on staple fixing, complete all as specified and as directed. |
| 40 | S&F Factory made single uPVC white colour Three track panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels ) upto 1.50m height made of ( big series ) frame 116x45 mm & sash 46x62mm both having wall thickness of 2.3mm + 0.2mm and single glazing bead / double glazing bead of appropriate dimension . (area of window above 1.75 sqm ) comprising of uPVC multichambered frame , with inbuilt roller track and sash extruded profiles duly reinforced with 1,60+0.20mm thick galvanised mild steel section made from roll forming process of required length ( shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks , EPDM gasket , wool pile zinc alloy ( white powder coated ) touch locks with hook , zinc alloy body with single nylon rollers ( weight bearing capacity to be 40 kg ) , GI fasteners 100x8mm size for fixing frame to finished wall and necesarry stainless screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of after fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality , complete all as specified and as directed.Note :- (i) Glass or wiremesh shall be paid separately (ii) For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e , in depth & width of profile shall be accepted but no extra payment on this account shall be made.) |
| 41 | S&F factory made uPVC white colour Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension (Area of window upto 0.75 sqm.) comprising of uPVC multichambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I. fasteners 100 x 8 mm size for fixingframe to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 42 | M&L providing and fixing factory made PVC shelf/partitation of required size consisting of 40mm thick solid PVC sandwich with 1mm thick plain PVC sheet on both sides suitably fixed in MS angle frame complete all as specified and as directed. |
| 43 | Dismatling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 44 | M&L framed work in tubular trusses such as roof trusses,trussed,purlines, crane gantries, rails and fastenings and heavy bracket framing including distance pieces, cleats etcs including special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St 240 complete all as specified and as directed. |
| 45 | M&L mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard 22 bars: barred iron doors; ladders, framed balusters, walk ways: railings; framework of water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and as directed. |
| 46 | Dismantling of corrugated steel in roof coverings including ridges, removing of unserviceable material form work site complete all as specified and as directed. |
| 47 | S&F Pre-painted galvalume aluminum zinc coating GI Based plain steel sheet 0.50 mm thick of any having tensile strength of 550 Mpa as in roof covering/ridges/Valleys / cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 48 | M&L preparation of new or previously untreated steel and iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. |
| 49 | M&L for preparation of old treated wood or wood based surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint including washing froors, cleaning glass, joinery, electrical fittings, wiring etc of drops and splashes complete all as specified and as directed. |
| 50 | S&F in repair 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and as directed. |
| 51 | S&F in repair 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane ,complete all as specified and as directed. |
| 52 | S&F stainles steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 53 | S&F in repair stainles steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staples complete all as specified and as directed. |
| 54 | Taking up or down 15 mm bore steel tubing and connections complete all as specified and directed. |
| 55 | S&F 15 mm nominal bore steel water tubes, 'medium grade' fixed on walls, floors and in ground etc for GI wire protection fixed on porcleain/ post insulator with necessary clamps/nut bolts as required complete all as specified and as directed. |
| 56 | Refixing of old steel tubing and connection in new or old position (wall, ceiling, floors, etc) of 15mm bore complete all as specified and as directed.Note :- Serviceable pipe obtained from item No.54 here-in-above. |
| 57 | Taking up or down GI 20mm steel tubing and connections complete all as specified and as directed. |
| 58 | S&F 20 mm nominal bore steel water tubes, 'medium grade' fixed on walls, floors and in ground etc for GI wire protection fixed on porcleain/ post insulator with necessary clamps/nut bolts as required complete all as specified and as directed. |
| 59 | Refixing old steel tubing and connection in new or old position (Walls, ceiling, floors, etc) complete all as specified and as directed.Note :- Serviceable pipe obtained from item No.57 here-in-above. |
| 60 | S&F in repair, 15 mm bore Stop valves, chromium plated, fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 61 | S&F in repairs PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and as directed |
| 62 | S&F in repair vitreous china wash basin, white, flat back of size 550x 400 mm including cutting for and pining, in ends of brackets or erecting stand, including PVC connection 15mm size with PTMT nuts, 450mm length and 32mm bore 900mm long corrugated waste pipe complete all as specified and as directed. |
| 63 | S&F vitreous China squatting pan Orissa\\" pattem size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) with 'P' or 'S\\" trap from or back inlet etc including connection to trap and flushing pipe and provision of 100mm thick cement concrete using type E2 1:5:10 bedding debries of the site including demolition of existing unserviceable squatting pan including concrete and removing debries of the site complete all as specified and as directed. |
| 64 | S&F in repair Vitreous China, pedestal pattern white (excluding fixing bolts, flushing cistem and flush pipe) including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed. |
| 65 | S&F in repair PVC low level white flushing system cistern 10 ltr capacity sleek having weight not less than 1.80 Kg including PVC flush pipe, supporting brackets and complete accessories complete all as specified and as directed. |
| 66 | M&L PVC (SWR) floor trap of 75 mm dia, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 67 | Taking down PVC/AC pipe of any dia & any description including all fittings complete all as specified and as directed. |
| 68 | S&F 110mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and as directed |
| 69 | S&F 75mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and as directed |
| 70 | S&F 110mm dia PVC SWR bends of any radius with out access door complete all as specified and as directed. |
| 71 | S&F 110mm dia PVC (SWR) junction single 'T' equal or unequal with access door complete all as specified and as directed. |
| 72 | S&F 110mm dia PVC (SWR) branch piece, single 'Y' equal or unequal complete all as specified and as directed. |
| 73 | S&F sinks with drainage board made of stainless steel 1mm thick sheet plugs, washers and waste pipe, including a pair of cantilever brackets embedded in wall with suitable size of PCC (1:3:6) type C-1 blocks and connecting union to pipe of overall size 915mm x 460mm & bowl size 410mm x 330mm x 160mm all complete as specified and as directed |
| 74 | S&F in repair stainless steel curtain rod 20 mm dia, mild steel chromium plated with fixing brackets, stops,rollers etc. complete all as specified and as directed. |
| 75 | Disconnecting existing tanks of capacity exceeding 500 ltrs and n. exceeding 1000 ltrs setting a side(or lowering if required for repairs, cleaning etc reconnecting and refixing in same position complete all as specified and as directed. |
| 76 | Taking down & refixing in same opening rolling shutter after repairing, oiling and greasing, etc complete all as specified and as directed. |
| 77 | M&L two coat of Aluminium paint on steel surfaces or iron surfaces of any description over 10cm in width or girth not otherwise described including prepration of new or previously untreated surfaces and priming with red oxide etc complete all as specified and as directed. |
| 78 | M&L preparation of old treated painting to wood or wood based surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint including washing froors, cleaning glass, joinery, electrical fittings, wiring etc of drops and splashes complete all as specified and as directed. |
| 79 | M&L preparation of old painting to steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint on the same complete all as specified and as directed. |
| 80 | M&L preparation of old treated wood or wood based surface of any description and applying a coat of french polishing including cleaning and preparing the surface including washing froors ceaning glass , joinery electrical fittings, wiring etc of drops and splashes complete all as specified and as directed. |
| 81 | ELECTRIFICATIONTaking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed. |
| 82 | M&L concealed point wiring One light point controlled by one way switch 5/6 amps complete with 1.5 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LSH cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LSH (ISI marked) as earth continuity conductor connected to common earth dolly, modular sheet steel sunken terminal box of appropriate size (minimum thickness of sheet not less than 0.8mm) suitable for modular switch/ fittings fixed in walls, with modular back plate, top cover fixed flush to wall for housing switches, socket outlets, fan regulators etc duly earthed including sinking for boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. complete all as specified and as directed. complete all as specified and as directed Note:- (i) Connections of cable with MCBs or bus bar shall be sone through proper size of copper/brass thimbles. (ii) Where concealing of conduit is not feasible ie on surface of RCC roof/ceiling etc, conduit shall be fixed on surface with necessary saddles at no extra cost |
| 83 | All as per item no 83 above, but for one ceiling fan/ exhaust fan point controlled by one, one ways switch and regulator |
| 84 | All as per item no 83 above, but for one 3 point 5 Amps switch socket outlet point controlled by one switch on the same board |
| 85 | All as per item no 83 above, but for one 3 pin 5 Amps switch socket outlet point controlled by one swtich on independent board. |
| 86 | All as per item no 83 above, but for one bell poin controlled by one, bell switch 5 Amps |
| 87 | All as per item no 83 above, but for one light point controlled by one, two way switch 5 Amps |
| 88 | All as per item no 83 above, but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point including ruining of 2.5 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly, complete all as specified and as directed. |
| 89 | S&F switch piano single pole flush type 5/6 amps, single pole on way complete all as specified and as directed |
| 90 | S&F switch piano flush type 5/6 ammps single pole two way complete all as specified and as directed. |
| 91 | S&F socket outlet 2 in 1, 5 Pin, 5/6 amps, white ivory finish flash type complete all as specified and as directed. |
| 92 | S&F socket outlet 2 in 1. 5 Pin, 5/15 amps, white Ivory finish flash type complete all as specified and as directed. |
| 93 | S&Fswitch piano single pole flush type 15/16 amps, single pole one way complete all as specified and as directed. |
| 94 | S&F Switch socket combination 2 and 3 Pin, 5/6 amps, multipurpose flush non shutter, non inter locking type white ivory finish complete all as specified and as directed. |
| 95 | S&F switch socket combination 2 in 1, 6 Pin 5/6 amps and 15/16 amps multipurpose, white/ivory finish flush non shutter non inter locking type with and including taking down existing unserviceable, complete all as specified and as directed. |
| 96 | S&F ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and as directed. |
| 97 | S&F in repair modular switch 6 amp of one module complete all as specified and as directed. |
| 98 | S&F in repair modular switch 16 amp of one module complete all as specified and as directed. |
| 99 | S&F modular socket 6 amp 2/3 pin combined 2 module 230 volt flush type complete all as specified and as directed. |
| 100 | S&F modular socket 6/16 amp 2/3 pin combined 2 module 230 volt flush type complete all as specified and as directed. |
| 101 | S&F in repair modular fan regulator 120W 230 volts AC 50 Hz 2 modules complete all as specified and as directed. |
| 102 | S&F in repair lamp holder, insulated body with back plate suitable for batten/angle fittings complete all as specified and as directed. |
| 103 | S&F LED white invertor type glass lamp 1x9/10 watt 230 volt base-22 complete all as specified and as directed. |
| 104 | S&F in repair deluxe fan Electronic regulator 120/280 volt AC 50 Hzs rotary step white/ivory finish complete all as specified and as directed. |
| 105 | S&F in repair hylam sheet 3mm thick white in colour of size 120mm x 120mm including taking down existing unserviceable complete all as specified and as directed. |
| 106 | S&F in repair hylam sheet 3mm thick white in colour of size 120mm x 170mm including taking down existing unserviceable complete all as specified and as directed. |
| 107 | S&F in repair hylam sheet 3mm thick white in colour of size 200mm x 100mm including taking down existing unserviceable complete all as specified and as directed. |
| 108 | S&F in repair hylam sheet 3mm thick white in colour round type of size 80mm dia including taking down existing unserviceable complete all as specified and as directed. |
| 109 | S&f in repair modular blank plates of 4 module including taking down existing unserviceable complete all as specified and as directed. |
| 110 | S&F in repair modular blank plates of 6 Module including takind down existing unservicable complete all as specified and as directed. |
| 111 | S&f in repair modular blank plates of 8 module horizonat type including taking down existing unserviceable complete all as specified and as directed. |
| 112 | S&F wall mounted 4 feet LED light fittings 1x18/20 watts 230 volt white powder coated slim box type (decorative) batten made of formed CRCA with snap on installer LED lighting fixture with and including 1x18/20 watt T8 single side connection retrofit LED tube with G13 lamp holdes, connector block, complete with all accessories internally pre-wired and including connection up with three core twisted flexible copper conductor cable up to ceiling rose complete all as specified and as directed. |
| 113 | S&F energy saving new generation environmental friendy long life versatile pressure die cast aluminium IP 66 Security light fitting luminair with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32mm dia 1.5 mtr long bend to required shape complete including removal of old unserviceable fitting complete all as specified and as directed. |
| 114 | S&F energy saving new generation 10 watt LED bulb head fitting IP 65 luminaire with open diffuser pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceilling rose to fitting including LED bulb complete all as specified and as directed. |
| 115 | S&F in replacement wall mounted 2 feet LED 10 watt batten type (decorative) light fittings, 230 volts with extruded aluminium heat sink providd for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements including necessary connection complete all as specified and as directed. |
| 116 | S&F post top lanterns 15 watt LED light fitting, new generation, energy saving, environmental friendly, longlife with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source, spun aluminium canopy, with opal/clean acrylic diffuser and complete with all accessories internally prewired including coneection up with three core twisted flexible copper conductor calbe up to cealing rose and necessary mounting arrangements, complete all as specified and as directed. |
| 117 | M&L, concealed sub-main wiring alongwith earth wire of size of 2 x 6.0 sq. mm + 1 x 6.0 sq. mm earth wire, ISI marked, FRLSH, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including PVC rigid conduit (medium grade) of suitable size with all fittings and accessories ISI marked complete all as specified and as directed.NOTE:(i) Two runs of PVC wire, one run of earth wire & one run of PVC Conduit will be measured as one length. (ii) Cost of cutting chases and making good the distrubed surfaces is deemed to be inclusive in the unit rate quoted. |
| 118 | M&L, concealed sub-main wiring alongwith earth wire of size of 2 x 4.0 sq. mm + 1 x 4.0 sq. mm earth wire, ISI marked, FRLSH, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including PVC rigid conduit (medium grade) of suitable size with all fittings and accessories ISI marked complete all as specified and as directed.NOTE:(i) Two runs of PVC wire, one run of earth wire & one run of PVC Conduit will be measured as one length. (ii) Cost of cutting chases and making good the distrubed surfaces is deemed to be inclusive in the unit rate quoted. |
| 119 | S&F fo sheet metal enclosures with socket two pin and earth plug top and MCB SP-20 Amp 230 volt complete all as specified and as directed |
| 120 | S&F MCB TPN 415 volts suitable for fixing in MCB DB of capacity 40/60 amps complete all as specified and as directed. |
| 121 | S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), double door, Triple pole & neutral with 200 amps rated bus bar, 415Volt IP-20 protection suitable for fixing MCB\\"S/lsolators with and including taking down old one complete all as specified and as directed. |
| 122 | S&F Sheet metal enclosure for 8 way Distribution Boards (DB’s), double door, single pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB\\"S/lsolators complete all as specified and as directed. |
| 123 | S&F MCB, single pole & neutral 5 to 32 amps, 240 volt, 'C' curve, 10 KA all complete with and including taking down old unserviceable one as specified and as directed |
| 124 | S&F MCB, Single pole, 5 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete with and including taking down old unserviceable one as specified and as directed. |
| 125 | M&L for earthing complete with galvanized steel plate electrodes of size600x600x6mm thick buried directly in ground with earth pit not less than 2.25 meter deep below normal ground level with top edge of plate not less than 1.5 meter below normal ground level connected to galvanised wire 4.00 mm earth lead by means of nuts, bolts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No-3 of SSR Part-I including necessary excavation and earth work, PCC 1:3:6 type C-1 with 50mm thick pre-cast RCC cover 1:2:4 type B-1 cover slab reinforced with 8 mm dia TMT bar @ 15cm C/C both ways with suitable handle of 10mm dia MS rod including providing charcoal or coke & common salt in alternate layer of 15cm compacted thickness all around the earth electrode with funnel and 20mm bore (light grade GI watering pipe wire mesh, aluminium lugs complete in all respect GI earth wire protected by 15mm bore GI pipe and other end connected with main switch/ earth test pont, including dismantling old unserviceable earth pit complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 18, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 13 daysJul 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysJul 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender