Tender For Repair To Plumbing, Tiling, Joinery And Other Misc Works In Omq And Mess Area At Af-I Under Ge (Af) Jamnagar No.2
Tender Value
35 Lakhs
Estimated cost
Bid Submission
09 Jul 2026
2 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jamnagar → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair To Plumbing, Tiling, Joinery And Other Misc Works In Omq And Mess Area At Af-I Under Ge (Af) Jamnagar No.2
BOQ
| Sl. No. | Item Description |
| 1 | M&L for repairs to CP/Brass bib taps / pillar taps / stop cock / angle valves / concealed stop cock / wall mixer / basin mixer including refixing and replacement of CP face along with removal of airlock/blockage in pipeline to ensure proper flow of water etc all as including making good the existing surface etc to stop the leakage ang making the same functional, complete all as specified and directed. |
| 2 | M&L for repairs to bib taps / pillar taps / stop cock / angle valves / concealed stop cock / wall mixer / basin mixer of any description for stopping leakage of water by replacement of brass spindle heavy quality and washer, complete all as specified and directed. |
| 3 | S&F in repair 15 mm size Angle cock/stop cock, cast copper alloy, chromium plated, fancy type with capstan head, concealed type, screwed down, screwed both end for iron pipes, complete all as specified and directed. |
| 4 | S&F in repair 15 mm size bib cock cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete all as specified and directed. |
| 5 | S&F in repair 15 mm size bib cock long body type cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete all as specified and directed. |
| 6 | S & F in repairs brass chromium plated shower rose 75 mm size fancy type with arms 15 mm inlet complete all as specified and directed. |
| 7 | S & F in repairs 15 mm size pillar taps, fancy type, cast copper alloy, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nut, screwed for iron pipe complete all as specified and directed. |
| 8 | S&F in repairs Brass CP mixer for mixing hot & cold water screwed down for iron pipe with 450mm long flexible connector and fixed complete all as specified and directed. |
| 9 | S&F in repair 15mm bore Wall mixer 3 in 1 system with provision for both telephonic shower & overhead shower system complete all as specified & as directed. |
| 10 | S&F in repair white vitreous china wash hand basin of size 580 x 440 mm, fixed over & including MS brackets comprising of the following items :-(a) Waste fitting 32 mm dia brass chromium plated with long screwed shanks and fly nut, flange end, bedded in red lead cement and other end fixed complete all as specified and directed.(b) PVC waste pipe 32 mm dia 750 mm long complete all as specified and directed. |
| 11 | S&F in repairs white Vitreous china wash down water closet (pedestal pattern) with fixing bolt, Plastic water closet seat, white, closed pattern with flat bottom, and cover with aluminised hinging device, including all connection complete all as specified and directed. |
| 12 | Supply and fix in repairs white vitreous china squatting pan ‘ORISSA’ pattern of size 580 mm x 450 mm white with integral foot rests with cast iron ‘P’ or ‘S’ trap, front or back inlet including all connection and provision of lime concrete base complete all as specified and as directed. |
| 13 | S & F in repairs two piece wall hung / floor mounted EWC with cistern size 65.5x36.5x75.5cm including custom made seat cover and twin flush fitting complete all as specified and directed. |
| 14 | S & F in repairs two piece wall hung / floor mounted twin flush internal cistern fitting of flush tank syphon kit along with toilet fill valve flush valve flapper and washer complete all as specified and directed. |
| 15 | Supply and fix in repairs 10 Litre capacity PVC syphonic action type flushing cistern low level with inlet ball valve, float, handle & flush pipe, fixed in position and connecting complete all as specified and directed. |
| 16 | S&F in repairs stainless steel sink, 1.00 mm thick for kitchen, with plug, washers, waste pipe including bedding in cement mortar on to draft wall or including fixing cantilever brackets, connecting union to pipe etc, overall size 495 mm x 420 mm, with bowl size 405 mm x 355 mm x 178 mm, including waste assembly, PVC flexible waste pipe complete all as specified and directed. |
| 17 | S&F in repair stainless steel sink with draining board for kitchen or laboratory, with plug, washers, waste pipe including bedding in cement mortar on to draft wall or including fixing cantilever brackets, connecting union to pipe etc, overall size 915 mm x 460 mm with bowl size 410 mm x 330 mm x 160 mm complete including waste coupling, waste pipe complete all as specified and directed. |
| 18 | Dismantling water tanks of capacity exc 250 and n.exc 500 ltrs. |
| 19 | Dismantling water tanks of capacity exc 500 and n.exc 1000 ltrs. |
| 20 | Supply and fix in repair 500 litres capacity, rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with 25mm dia GI tank nipple of for inlet, outlet, washout and overflow etc complete all as specified & directed. |
| 21 | Supply and fix in repair 1000 litres capacity, rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with 25mm dia GI tank nipple of for inlet, outlet, washout and overflow etc complete all as specified & directed. |
| 22 | S&F ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass ferrule and fixed 25mm dia complete all as specified and directed. |
| 23 | Supply & fix in repair Nipple suitable for HDPE water tank (Minimum weight of 25mm- 65gms) inlet /outlet suitable for 25 mm bore pipe complete all as specified and directed. |
| 24 | S&F in repair Health Fauset (Hand shower) with 8mm dia 1 metre long easy flex tube and in chorme finish & wall hook complete all as specified and directed. |
| 25 | S&F in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass ferrule and fixed 25mm dia complete all as specified and directed. |
| 26 | S&F in repair 600 mm long PVC connections 15 mm size with PTMT nuts at both end complete all as specified and directed. |
| 27 | S&F in repairs plastic sheet covers for water closet, black, closed pattern with flat bottom with mild steel chromium plated or alluminised hinging device complete all as specified and directed. |
| 28 | S&F in repairs PVC hydraulic toilet seat cover soft noise proof for round or elongated or rectangular seat suitable for all type of Wall hung / single peice / combo fitting EWC, closed pattern with flat bottom with mild steel chromium plated or alluminised hinging device and plasic screws complete all as specified and directed. |
| 29 | S&F in repairs Tubular towel rail, 20 mm dia, D type, 60cm long between flanges, complete all as specified and directed. |
| 30 | S&F Chromium plated corner glass shelf size 9 inch with bracket, complete all as specified and directed. |
| 31 | S & F in repair PTMT alloy bathroom mirror cabinet size 500 x400 mm and making of fancy type mirror wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 32 | S&F in repair 600 mm x 450 mm x 5 mm thick mirror selected quality, mounted on 4-5 mm thick water proof plywood (BWP grade), with aluminium angle beading all around, fixed on wall with nylon sleeve & cadmium plated screws, complete all as specified and directed. |
| 33 | S&F in repair stainless steel kitchen plate rack of size 31\\" x 24\\" x 10\\" deep, fabricated with 0.63 mm sheet fixed in position on wall, complete all as specified and directed. |
| 34 | S&F in repair Waste pipe of PVC 31/32 mm x 800mm long, complete all as specified and directed. |
| 35 | S&F in repairs water tank covers for 500/1000 ltrs capacity tank complete all as specified and directed. |
| 36 | Taking down steel water tubing and connection 15mm dia bore and removal from site, complete all as specified and directed. |
| 37 | Taking down steel water tubing and connection 20mm dia bore and removal from site, complete all as specified and directed. |
| 38 | Taking down steel water tubing and connection 25mm dia bore and removal from site, complete all as specified and directed. |
| 39 | S&F 15mm Tubes, 'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 40 | S&F 20mm Tubes, 'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified. |
| 41 | Supply and fix 20 mm outer dia CPVC pipes SDR 11 & plain CPVC SER 11 fittings, fixed on wall concelled or exposed /ceiling or laying in floors complete all as specified.Note:- Cutting chease wherever required will be measured & paid separately. |
| 42 | Supply and fix 25 mm outer dia CPVC pipes SDR 11 & plain CPVC SER 11 fittings, fixed on wall concelled or exposed /ceiling or laying in floors complete all as specified.Note:- Cutting chease wherever required will be measured & paid separately. |
| 43 | M&L for cutting chases, of girth not exceeding 10 cm for concealed water tubing or concealed conduit wiring, etc. in stone / brick masonry wall built in cement mortar and making good, disturbed surface in cement mortar 1:3, complete all as specified and directed. |
| 44 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories, complete all as specified and directed. |
| 45 | S&F PVC (SWR) pipes 75 mm dia single socketed, in any length, with rubber ring joints jointed with solvent cement, fixed to walls complete all as specified and as directed. |
| 46 | S&F PVC (SWR) pipes 75 mm dia single socketed, in any length, with rubber ring joints jointed with solvent cement , laid in trenches or in floors complete all as specified and as directed. |
| 47 | S&F PVC (SWR) pipes 110 mm dia single socketed, in any length, with rubber ring joints jointed with solvent cement , fixed to walls complete all as specified and as directed. |
| 48 | S&F PVC (SWR) pipes 110 mm dia single socketed, in any length, with rubber ring joints jointed with solvent cement , laid in trenches or in floors complete all as specified and as directed. |
| 49 | S&F PVC (SWR) bends 110 mm dia complete all as specified and directed. |
| 50 | S&F PVC (SWR) bends 75 mm dia complete all as specified and directed. |
| 51 | S&F PVC (SWR) vent cowl 110 mm dia complete all as specified and directed. |
| 52 | S&F PVC (SWR) vent cowl 75 mm dia complete all as specified and directed. |
| 53 | S&F in repair cast iron floor trap 100 mm dia of outlet, including jointing to waste pipe, fixed in cement concrete (1:2:4) using 12.5 mm graded stone aggregate complete all as specified and directed. |
| 54 | S&F in repair cast iron nahani trap 100 mm dia of outlet, including jointing to waste pipe, fixed in cement concrete (1:2:4) using 12.5 mm graded stone aggregate complete all as specified and directed. |
| 55 | S&F in repair SS Grating of size 150 mm x 150 mm fixed with white or grey cement complete all as specified. |
| 56 | Demolition of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including removal of debries to outside MOD land complete all as specified and directed. |
| 57 | M & L for 25 mm thick cement concrete 1:2:4 type B1 (using 12.5 mm graded aggregate) as in levelling course complete all as specified and directed. |
| 58 | M&L Non - skid joint free coloured Ceramic tiles (1st quality) not less than 7 mm thick of size exc 0.06 sqm but n exc 0.11 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over & including 15mm screed bed or bedding in CM 1:6 complete all as specified and directed. |
| 59 | M&L for joint free coloured glazed ceramic tiles thickness not less than 7mm size of tiles 450mmx300mm as in skirting / dado etc laid jointed in neat cement slurry and pointed with white or coloured cement to match the tiles over & including 10mm thick backing coat in CM 1:4 complete all as specified & directed. |
| 60 | M&L for light shed vitrified coloured tiles not less than 10 mm thick of size 600x600mm in floors/skirting etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match the tiles over and including 15 mm thick screed be in CM 1:6, complete all as specified and directed. |
| 61 | Dismantling of granite tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons cills or plateform etc complete all as specified and directed. |
| 62 | M&L for Granite work 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in coloured cement (1:2) using marble dust with admixture of pigment to match with granite shade, laid over and including 15 mm thick cement screed bed in CM 1:6, complete all as specified and directed. |
| 63 | M&L for rounding to edges of Granite stone slabs edge, such as in steps cooking plateform, and other similar situation. |
| 64 | Demolition of cement concrete in ground floor and paving n exc 15 cm thickness below or above ground level, including removal of debries outside MOD land complete all as specified and directed. |
| 65 | Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, including removal of debries to a distance exc 1.5 Km but n. exc 2 Km, complete all as specified and directed. |
| 66 | M&L for rendering 10 mm thick in CM 1:6 on brick or stone walls to be finished even and smooth (without using extra lime or cement) complete all as specified and directed . |
| 67 | M&L for 5 mm thick rendering in cement mortar 1:4 (as second coat), over and including 10 mm thick rendering in cement mortar 1:6 (as first coat) on stone / PCC blockmasonry wall surface, including mixing liquid water proofing compound in second layer only as per manufacturers instructions, finished the surface even & smooth without using extra cement complete all as specified and directed. |
| 68 | M&L for 5 mm thick rendering in cement mortar 1:3 on concrete surface of ceiling, finished even and smooth without using extra cement, complete all as specified and directed. |
| 69 | M & L for preparation of new plastered surfaces of walls & applying two coat of distemper oil emulsion over a coat of primer over and including cement base wall cair Putty on wall surfaces, complete all as specified and directed. |
| 70 | M&L for preparation of new pastered surface of wall and applying two coats of Acrylic emulsion (exterior weather coat) paint of any tint as approved over one coat of primer applied as per manufacturer's instruction, complete all as specified and directed. |
| 71 | M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 72 | M&L for Cleaning of HDPE service water tank of capacity exc 250 litre & up to 500 litre and connected circulating pipes at any position by removing sludge, mud, moss, moulds, efflorescent salts, oil spots etc or any other foreign material from the bottom, cover and internal surfaces by scraping using wire brush, draining out the water from the tank and washing internally with water & bleaching powder (0.10 Kg of bleaching powder will be mix in 1 litre water) and again draining out the water from the tank and writing the date of cleaning with white synthetic enamel paint on black background with synthetic enamel paint complete all as specified and directed. |
| 73 | M&L for Cleaning of HDPE service water tank of capacity exc 500 litre & up to 1000 litre and connected circulating pipes at any position by removing sludge, mud, moss, moulds, efflorescent salts, oil spots etc or any other foreign material from the bottom, cover and internal surfaces by scraping using wire brush, draining out the water from the tank and washing internally with water & bleaching powder (0.10 Kg of bleaching powder will be mix in 1 litre water) and again draining out the water from the tank and writing the date of cleaning with white synthetic enamel paint on black background with synthetic enamel paint complete all as specified and directed. |
| 74 | S & F in repair PVC jet with inlet pipe suaitable for EWC complete all as specified and directed. |
| 75 | S&F in repairs telephonic shower multiflow 100 mm dia (ABS chrome plated) with 1.5 m flexible tube with 12 mm dia & swinging wall hook complete all as specified & directed. |
| 76 | S&F in repair glass soap dish chromium plated of fancy type complete all as specified and directed. |
| 77 | S&F towel ring chromium plated fancy type with round flange (Square/Round) complete all as specified and directed. |
| 78 | S&F Soap Dispenser chromium platedcomplete all as specified and directed. |
| 79 | S&F toilet paper holder chromium plated complete all as specified and directed. |
| 80 | S&F tumbler holder/Brush holder chromium plated complete all as specified and directed. |
| 81 | S&F in repair glass shelves with all fixing arrangements and suitable size (450X150mm) complete all as specified and directed. |
| 82 | S&F towel rack chromium plated fancy type with round flange complete all as specified and directed. |
| 83 | S&F Single lever deck mounted wash basin mixture tap chromium plated fancy type with round flange complete all as specified and directed. |
| 84 | S&F in repairs swan neck tap with swivel spout for washbasin and sink chromium plated fancy type complete all as specified and directed. |
| 85 | S&F in repairs for waste coupling of PTMT 40 mm discharge pipe (half or full threaded), (minimum weight 32mm-45gms/40mm-60gms), complete all as specified and directed. |
| 86 | S & F in repairs wall mounted concealed flush tank with EWC combo fitting any type or any model or any pattern including any connected accessories and hire of any agency for the fixed, complete all as specified and directed. |
| 87 | Supply & Fix in Repair 25mm dia mild steel chromium plated curtain rod fixing with brackets, stop, rollers complete all as specified and directed. |
| 88 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed. |
| 89 | S&F 3mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each complete all as specified and directed. |
| 90 | S&F figured glass, pin head type 4 mm thick in squares n.exc 0.50 Sqm in each pane etc complete all as specified and directed. |
| 91 | S&F in repair Stainless steel wire cloth, 0.36 mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples complete all as specified and directed. |
| 92 | S&F in repair 150mm long aluminium anodized barrel tower bolts of extruded section, complete all as specified and directed. |
| 93 | S&F in repair 150mm size extruded aluminium alloy handles, fabricated type anodized, complete all as specified and directed. |
| 94 | S&F in repair Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed |
| 95 | Taking down chowkat with shutter/without taking off shutter from the frame n exe 1.50 Sqm each complete all as specified and directed. |
| 96 | S & F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.. |
| 97 | S&F factory made factory made solid PVC Moulded Door Shutter, 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick Moulded PVC Sheet on the front face & 2 mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed. |
| 98 | S&F 75 mm size long Butt hinges, medium weight, cold rooled, mild steel and fixed, complete all as specified and directed. |
| 99 | S&F 125 mm size extruded aluminium alloy handles, fabricated type anodized complete all as specified and as directed. |
| 100 | S&F 150mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed. |
| 101 | Taking down chowkat with shutter/without taking off shutter from the frame exe 1.50 Sqm but n.exc 4.00 Sqm each complete all as specified and directed. |
| 102 | S&F for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., size of frame 125 x60 mm complete all as specified and directed. |
| 103 | S&F for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., size of frame 105 x60 mm complete all as specified and directed. |
| 104 | S&F 35mm thick factory made flush shutter solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed. |
| 105 | S&F 35mm thick 2nd class hard wood skeleton shutter open rebated & prepared to receive glass, gauge etc (with out sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, gauge etc complete all as specified and directed. |
| 106 | M & L preparation of new wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer exc 10 cm width or girth complete all as specified and as directed. |
| 107 | M & L for PCC type C-1 (1:3:6) using12.50mm graded stone aggreagate as in bed block for fixing of hold fast filling concrete in door frame incl necessary form work complete all as specified and directed. |
| 108 | S&F 150 mm size extruded aluminium alloy handles, fabricated type anodized complete all as specified and directed. |
| 109 | S&F 200mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed. |
| 110 | S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 111 | M&Lfor applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified and directed. |
| 112 | M&L for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, n exc 10cm width or girth when unconnected with other painting or when painted in different tint, including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified and as directed. |
| 113 | S&F Stainless steel wire cloth, 0.36 mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples complete all as specified and directed. |
| 114 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 115 | S & F Aluminium anodised snap grid frame work for false ceiling of grid size 605 x 605 mm as specified and suspended with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs / ceilling complete all as specified and directed. |
| 116 | S&F for Non asbestos fibre cement building board (E- Board) 4 mm thick for fixed to Aluminium frame work with screws as in ceiling complete all as specified and directed. |
| 117 | M & L for preparation of new unplastered surfaces over ceiling and applying two coats of oil bound distemer over a coat of primer on board complete all as specified and directed. |
| 118 | S& F False ceiling with 12 mm thick of size 1.20 m*2.40 m plaster of paris sheets cut at any size and fixed with machine screws on and including GI channel 22 gauge thick grid work, main joints places at 1.20 m centre to centre , hanging with 22 gauge GI strip suspenders from roof J hooks bolts and nuts etc and treating the POP sheets with thin layer of POP with gypsum anhydrous binder and preapare the surface till smooth surface is achieved and applying two coat of texture paint of any paint and design over a coat of texture of primer on ceiling sheets all complete as reqd as per manufacturers instructions and complete all as specified and directed. ( pattern and design shall be directed by engr in charge during execution of work ) (the exposed surface of the false ceiling shall be joint less even smooth to recieve texture paint ) (the POP sheets shall be fixed with suitable screws below the grid shall not be placed over the grid) |
| 119 | M&L for decorative cornices /moulding using POP of cross sectional dimension exc 25sqcm and n exc 50 Sqm as per pattern and design as approved and fixed in posn including preperation of surfaces and applying two coats of textured paint over primer match with the ceiling sheets all complete all as specified and directed. Note : Pattern and design shaal be directed by engr in charge during execution of work. |
| 120 | S&F in repairs for asbestos fibre cement building board 4 mm thick for fixed or laid to GI frame work with screws as in ceiling complete all as specified and directed. |
| 121 | S& F 140 mm long floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 122 | S&F Butt hinges, extruded aluminum alloy with galvanized MS sheet hinges pin anodized of 100 mm size type B-21, complete all as specified and directed. |
| 123 | Removal of existing roof treatment consisting of screed bed, tar felts etc, and removal of debris outside MD land complete all as specified and directed. |
| 124 | Demolition of un-reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 125 | M&L for cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate), (Avg 50 mm thickness) in roof for padding to achieve the 1:40 slope complete all as specified and directed. |
| 126 | M&L for rendering 10 mm thick on concrete surface whilst the concrete is green, in cement mortar (1:4) finishing the surface even and smooth without using extra cement, including mixing only liquid water proofing compound as per manufacturer instruction complete all as specified and directed.Note:- WPC will be measured & paid separately. |
| 127 | Material and labour for water proofing treatment by applying one coat of oil base bituminous primer @ 0.3 Kg/Sqm with brush / roller, laying of 3 mm thick APP based polymer modified membrane reinforced non-woven polyester, weight not less than 3.50 Kg/Sqm and sealing all the over laps100 mm in length side and 100 mm in width side of membranes laid with torch application complete all as specified and directed.Note :- Work shall be carried out upto 2 & 3 storey bldg, contractor to quote rates accordingly |
| 128 | Supply only liquid water proofing compound, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender