|
| 1 | M&L for Pre Polished glossy finish Machine cut kota stone slab flooring 18-20 mm thick (incl one piece stones on stairs and in skirting/risers) over and incl cement screed base 15 mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl dismantling of stone slab of any thickness/ description laid in in cement mortar, complete all as specified and directed. |
| 2 | S&F 8 mm thick Zypsum Ceiling boards (prelaminated on all faces) including Anodised aluminium snap grid frame work (Size of grid 605 x 605mm) for false ceiling and dismantling of old ceiling of any description / thickness, complete all as specified and directed. |
| 3 | M&L for Vitrified Ceramic tiles 9-10 mm thick (square/ rectangular) polished (digital /nanotech or double charged tiles as approved by user) , area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid overand including15 mm thick Screed bed or bedding layer of mortar in CM 1:4 for laying floor finishes including dismantling of floor tiles of any description, complete all as specified and directed. |
| 4 | M&L for Vitrified Ceramic tiles 9-10 mm thick (square/ rectangular) polished (digital /nanotech or double charged tiles as approved by user) , in skirting / vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing coat in CM 1:3, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etc., complete all as specified and directed. |
| 5 | M&L for Glazed ceramic tiles in vertical surface 300x 450x 7 or 300 x 200 x 7 mm thick (digital /nanotech or double charged tiles as approved by user) set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick backing coat in CM 1:4 (if reqd in any portion), including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etc. removing rubbish off the premises, complete all as specified and directed. |
| 6 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (digital /nanotech or double charged tiles as approved by user) (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed or bedding layer in CM 1:4 and including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises, complete all as specified and directed. |
| 7 | S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated (or plain in ridge) steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws incl dismantling of old roof sheets (any description, any thickness), complete all as specified and directed. |
| 8 | S & F 2mm thick Fibre glass reinforced translucent/coloured, corrugated/plain sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc & incl dismantling of old sheets ( any description, any thickness), complete all as specified and directed. |
| 9 | Dismantling timber scantlings 40 sq. cm and over in section, in any position incl Truss, purlin, rafter, post etc embedded in concrete or brick work, complete all as specified and directed. |
| 10 | S&F for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam,tee, angle, channel or flat sections) including distance pieces,cleats etc Fe 410-w(Gde-E-250)Quality-A, complete all as specified and directed. |
| 11 | S&F for joist,channel,angle,or tee sections,fixed independently, without connecting plates,etc (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe-410 W(Gde- E-250)Quality-A, complete all as specified and directed. |
| 12 | M&L for plain Cement concrete type C2 (1:3:6) (using 40 mm graded crushed stone aggregrate) in foundations, filling and mass concrete incl demolition of concrete in ground floor, complete all as specified and directed. |
| 13 | M&L for preparation of new steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed. |
| 14 | Excavation in post holes soft/hard (or similar holes ) each not exceeding 0.5 cum, getting out, and removing surplus soil to a distance n.exc 50m and making good surface, complete all as specified and directed. |
| 15 | S&F for mild steel as in Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 & cleat to weld arth existing angle iron from bar, complete all as specified and directed. |
| 16 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at oneend and screwed the other, or screwed both ends, each screwed end to be fitted withwashers and one hexagonal or square nut,exc 10cm and n exc 15cm long with dia of neck 5 to 10mm, complete all as specified and directed. |
| 17 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire and dismantling of fencing wire mesh, any type, complete all as specified and directed. |
| 18 | Supplied only chain link MS galvanisd fencing, any size or type complete all as specified and directed. Note :Actual weight of the fencing shall be ascertained by board of officers to be convened by GE. |
| 19 | Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends,for manhole cover handle and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 20 | Demolition of lime/cement concrete un-reinforced any description in any position, complete all as specified and directed. |
| 21 | M&L for plain Cement concrete type D- 2, 1:4:8 (using 40mm graded crushed stone aggregate) 100 mm thick, as in sub base of floors, complete all as specified and directed. |
| 22 | M & L for plain cement concrete (1:2:4) type B0 (using12.5mm graded crushed stone aggregate) 25mm thick, as in sub-base and finished surface even and smooth without using extra cement, complete all as specified and directed. |
| 23 | M & L for coloured Chequered cement concrete tiles 30cm X 30cm X 25 mm thick, PU mould finished vibro compacted with white cement and pigments set, jointed in neat cement slurry in floors laid over and including 15mm thick screed bed or bedding layer CM 1:4, complete all as specified and directed. |
| 24 | M&L for coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-30 Grade, vibro compacted in PU moulds and including 50mm thick sand cushioning, complete all as specified and directed. |
| 25 | M&L for coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-30 Grade, vibro compacted in PU moulds and including 50mm thick sand cushioning, complete all as specified and directed. |
| 26 | M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and directed. |
| 27 | Taking down frame with shutters (without taking off shutters from frame) exc 1.5 sqm but n.exc 4 sqm each, complete all as specified and directed. |
| 28 | Taking down frame with shutters (without taking off shutters from frame) n.exc 1.5 sq.m each, complete all as specified and directed. |
| 29 | Taking down shuttersof any description n.exc 1.0 sqm each, complete all as specified and directed. |
| 30 | Taking down shutters any description exc 1 sqm and n.exc 2 sqm each, complete all as specified and directed. |
| 31 | M & L for second class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed. |
| 32 | M & L for 35mm thick second class hard wood glazed and skelton shutters open rebated and prepared to receive glass,gauze etc (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred breds for securing glass, etc sizes of members of shutters as specified in SSR Pt-I, Sec 8 Clause 8.20(a) and fitted to chowkats, complete all as specified and directed. |
| 33 | M&L for 35mm thick factory made plain framed, panelled shutter(two panel) with lock rail (2nd class HW rail and style) and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed. |
| 34 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing |
| 35 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed. |
| 36 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane, complete all as specified and directed. |
| 37 | S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples etc., complete all as specified and directed. |
| 38 | S&F 150 mm size aluminium handles,cast type,anodised, complete all as specified and directed. |
| 39 | S&F 125 mm size aluminium handles,cast type,anodised, complete all as specified and directed. |
| 40 | S&F 200 mm long (Length of bolt) Aluminium anodised barrel tower bolt of extruded section, complete all as specified and directed. |
| 41 | S&F 150 mm long (Length of bolt) Aluminium anodised barrel tower bolt of extruded section, complete all as specified and directed. |
| 42 | S&F 100 mm size steel butt hinges medium weight, cold rolled mild steel, complete all as specified and directed. |
| 43 | S&F 300mm long (Length of bolt) mild steel sliding door bolts, clip type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified and directed. |
| 44 | M&L for preparation of new wood and wood based surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 45 | S&F, 3mm sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 sqm in each plane including hacking out old broken glass ( any thickness, size, quality or description) from wooden/ aluminium/steel frames or stone,concrete or brick surrounds , glazed with putty or fixed with beads, complete all as specified & directed. |
| 46 | S&F in repair galvanised steel wire cloth 0.56mm nominal dia of wire and average width of aperature 18mm, Complete all as specified and directed. |
| 47 | M&L Brick work with sub class 'B' Bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 including demolition of brickwork built in cement mortar in any position, complete all as specified and directed . |
| 48 | M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM1 :4 finished fair & even, complete all as specified and directed. |
| 49 | M&L rendering 15mm thick in cement plaster on fair faces of brick or concrete surface in CM (1:4) finished fair & even, complete all as specified & directed. |
| 50 | M&L for 15mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished to even & smooth without using extra cement & Including taking down cement plaster incl racking out joints, hacking for key & scrubbing down with water etc., complete all as specified and directed. |
| 51 | M&L for 15mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces finished to even & smooth without using extra cement & Including taking down cement plaster incl racking out joints, hacking for key & scrubbing down with water etc., complete all as specified and directed. |
| 52 | M&L for preparation of new plastered surface of wall and applying two coats of cement base paint, complete all as specified and directed. |
| 53 | M&L for preparationof new surfaceof walls and applying two coats oil bound distemper over coat of suitable primer, complete all as specified and directed. |
| 54 | S&F in repair vitreous china squatting pan 'Orissa' pattern long pan size 580 x440 mm white with integral foot rests (excluding cistern and flush pipe),including provision of cement concrete bedding, complete all as specified and directed. |
| 55 | S & F,In repair vetreous china wash down water closet pan (pedestal pattern,white, complete all as specified and directed. |
| 56 | S&F in repair 10 liter capacity PVC valveless, syphonic action type,flushing cistern,low level,white,with inlet,ball valve,float, handle inc brackets,l 32mm dia flush pipe and connection to pipes, complete all as specfied and directed. |
| 57 | S&F in repair Vitreous china wash basin white flat back size 580x450 mm excluding taps waste chain and plug and porcelain stopper but including brackets any size,including waste coupling & cutting for and pinning in ends of brackets including 15 mm bore CP centre hole mixer for mixing hot & cold water screwed down for iron pipe and waste pipe, complete all as specfied and directed. |
| 58 | S&F in repair Angle valve / Stop valve 15mm dia fancy type chromium plated,screwed down,high pressure, with crutch or butterfly handle,screwed both ends for iron pipe or for union, complete all as specfied and directed. |
| 59 | S & F in repair PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and directed. |
| 60 | S & F in repair CP brass soap dish, heavy duty, fixed with chromium plated brass screws, complete all as specified and as directed. |
| 61 | S & F in repair CP Towel Ring 200mm dia fixed with chromium plated brass screws, complete all as specified and as directed. |
| 62 | S & F in repair CP steel grating 75/100mm dia, complete all as specified and directed. |
| 63 | Supply and fixing in repair 600mm X 450mm bevelled edge mirror of selected quality glass,mounted on plastic frame covered & back and fixed on wooden plug with chromium plated brass screws and cup washer, complete all as specified and directed. |
| 64 | S & F in repair 15mm dia Bib taps, chromium plated fancy type,screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed. |
| 65 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed. |
| 66 | S&F in repair Corner/Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed. |
| 67 | S&F, in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed. |
| 68 | S & F in repair 15mm bore sink mixer, for mixing hot or cold water, brass, CP, fancy type, with capstan head handles, screwed down high pressure, screwed for iron pipe or for brass ferrule of 15mm dia, complete all as specified and directed. |
| 69 | S&F rotational moulded polythylene water storage tank 1000 litres capacity (Cylindrical vertical with closed top or any other shape as ordered) hoisted and fixed in position incl tank connection nipple, all other accessory and including dismantling of old water tank, complete all as specified and directed. |
| 70 | S&F, in repair rotional molded polythylene water storage tank 500 ltr capacity (Cylinderical vertical with closed top) hoisted kand fixed in position Including dismantling PVC Water Tank exc 250 litres and not exc 500 litres capacity, complete all as specified and directed. |
| 71 | S&F in repair 20mm bore ball brass valves, high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule, complete all as specified and directed. |
| 72 | S&F in repair 20mm bore stop valve, cast copper alloy,screwed down,high pressure, with crutch or butterfly handles, screwed both ends for iron pipe or for union, complete all as specified and directed. |
| 73 | S&F in repair 25mm outer Dia 3-layer PP-R polyproxylene random copolymer)concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc., complete all as specified and directed. |
| 74 | S&F in repair 32mm outer Dia 3-layer PP-R polyproxylene random copolymer)concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc.,, complete all as specified and directed. |
| 75 | S&F PP-R Gate valves (brass insert) 25mm outer Dia as per requirement of the site, complete all as specified and directed. |
| 76 | S&F PP-R Gate valves (brass insert) 32mm outer Dia as per requirement of the site complete all as specified and directed. |
| 77 | S&F in repair 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors incl all traps, Tees, elbows, sockets etc fittings, complete all as specified and directed. |
| 78 | S&F in repair 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors incl all Tees, elbows, sockets etc fittings complete. |
| 79 | S & F in repair 15 mm bore Brass CP Wall mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed |
| 80 | M&L for preparation of old distempered surfaces of walls by washing, rubbing down and stopping and applying two coat of distemper oil emulsion complete all as specified and directed. |
| 81 | M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 82 | M&L for Complete removal of the existing treatment on walls by scraping and washing down with water and applying two coats of distemper oil emulsion over a coat of suitable primer over 1mm thick wall care putty, complete all as specified and directed. |
| 83 | M&L for preparation of old plastered surface of wall and applying two coats of cement base, paint complete all as specified and directed. |
| 84 | M&L for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 85 | M&L for preparation of old plastered/ unplasterd white washed surfaces of walls/Ceiling and applying three coat of white washing, complete all as specified and directed. |
| 86 | M & L for preparation of old plastered or unplastered of Wall / Ceiling surface and applying two coat of acrylic emulison paint ( upto 4th storey building ) incl necessary scafolding, complete all as specified and directed. |
| 87 | M&L for Plain cement concrete 1:2:4 type B1, using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs ,water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 88 | Notes :-An amount of Rs.79405.00 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum. Please Enable Macros to View BoQ information |
