|
| 1 | Surface dressing n.exc 15cm deep and getting out in soft/loose soil,complete all as specified and directed. |
| 2 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering, complete all as specified and directed. |
| 3 | M&L for Hardcore broken stone or boulders of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and directed. |
| 4 | Excavation over area in any type of soil n exc 1.5m wide and not exc 1.5m depth , for foundation etc not exc 10.00sqm on plan and not exc 1.5m depth and getting out in any type of soil including getting out and disposal of excavated earth upto 50m and lift upto 1.5 m , complete all as specified and directed. |
| 5 | Excavation in trenches n exc 1.5m wide and not exc 1.5m depth , for foundation etc or for shafts ,manholes, etc not exc 10.00sqm on plan and not exc 1.5m depth and getting out in any type of soil including getting out and disposal of excavated earth upto 50m and lift upto 1.5 m, complete all as specified and directed.charge |
| 6 | M & L for plain cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling, mass concrete and sub base of flooring, complete all as specified and directed. |
| 7 | M&L for walling of random rubble uncoursed well bounded , bedded and solidly hearted built in Cement mortor 1:4, complete all as specified and directed. |
| 8 | M&L for plain cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in copying, DPC etc including weathering slightly rounded and chamfered, complete all as specified and directed. |
| 9 | M&L reinforced cement concrete (nominal mix) Type-B-1 (1:2:4) (using 20mm graded crushedstone aggregate) as in foundation raft,footings, foundation beam , plinth beams , bases for columns etc., complete all as specified and directed. |
| 10 | M&L for Reinforce cement concrete (nominal mix) type B1 1:2:4 (using 20mm graded stone aggregate) Slabs supported on walls, lintle beams/roof beams and columns in , roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified & directed. |
| 11 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finish, complete all as specified and directed. |
| 12 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions etc ., complete all as specified and directed |
| 13 | Formwork to sides and soffits of floor , lintle beam or roof beams, beam haunchings, girders,bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floor and beam etc., complete all as specified and directed. |
| 14 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 15 | Description all as per serial item No 14 here-in-before, but 6 to 8mm dia as in stirups, complete all as specified and directed. |
| 16 | M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc 6 mtr mean radius built in CM(1:6), complete all as specified and directed |
| 17 | S&F for Framed brackets of angles or tees with web and flanges, tubular pipes cut to shape,drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165, complete all as specified and directed. |
| 18 | S&F mild steel work in plates (plain) channels, squares cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment, complete all as specified and directed. |
| 19 | S&f mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed both ends each screwed end to be fitted with washers and one hexagonal square nut, n exc 30cm long dia of neck n. exciding 20mm dia, complete all as specified and directed. |
| 20 | Preparation of new or untreated steel surface of any description exc. 10 cm. in width or girth and applying two coats of synthetic enamel paints, over a coat of red oxide primer, complete all as specified and directed. |
| 21 | S&F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with slef taping screws, complete all as specified and directed. |
| 22 | S&F for Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self taping screws, complete all as specified and directed. |
| 23 | M & L for rendering 10 mm thick in cement mortar 1: 6 on fair faces of brick work or concrete surfaces, finished even and smooth with out using extra cement, complete all as specified and directed. |
| 24 | M & L for rendering 15 mm thick in cement mortar 1: 4 on fair faces of brick work or concrete surfaces, finished even and smooth with out using extra cement, complete all as specified and directed. |
| 25 | M & L for plain cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) 75mm thick as in plinth protection, sub base etc finished even and smooth with out using extra cement including forming and filling of joints 12mm wide with bituminous filler grade 'A', complete all as specified and directed. |
| 26 | M&L for plain cement concrete 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) 40mm thick, as in flooring, rough finished, complete all as specified and directed. |
| 27 | M&L 6mm thick Non Asbestos fibre cement /Pre Laminated self embosssed texture designer board E-Board classic size 595x595mm, HPSC (High pressure steam cured) to be fixed or inserted to pre laminated GI frame work for seamless ceiling size 600mm x 600mm with main runner 38x24x0.9mm thick, cross tee 8.6x24x0.9mm and wall angle 19x19x0.9mm duly suspended with 2mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip, complete all as specified and directed. |
| 28 | M&L coloured ColouredDark shade/Double charged /ultracharged vitrified ceramic tiles 10mm thick exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed or bedding layer in CM 1:6, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etc., complete all specified and directed. |
| 29 | S&F solid PVC wall lining consisting of 5mm thick plain colour PVC sheet & 5mm thick PVC sheet fillet of 30mm width at minimum 6 to 7 RM per sqm of wall lining including of fixing to wall to make PVC frame & PVC fillets for joints & corners to give uniform finished look, complete all as specified and directed. |
| 30 | S&F Powder coating of any colour (Thickness of powder coating not less than 50 micron ) Three Track window with frame, 3 Nos shutters (Two to receive glass and one for wire gauge) including 4.5mm thick Tinted glass and stainless wire mess as in three track window all as per description and standard pattern including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handle , locking arrangements etc etc., complete all as specified and as directed. |
| 31 | S&F for Pre-painted galvalume aluminum zinc coating GI based plain designer steel sheet 1 mm thick fixing over 25mm thick wooden eaves board 300mm width as in eavesboard/facia boards including fixing with necessary fitings and fixtures, complete all as specified and as directed. |
| 32 | S&F 110 mm dia PVC (SWR) pipes including necessary bends, fittings etc single socketed in any length with rubber ring joints fixed to walls/Trenches etc., complete all as specified and directed. |
| 33 | M&L 2nd class hard wood solid , straight chowkhats and frames , wrought framed rebated on th solid , rounded or chamfered put together with glue pinned at joints supplied and fixed, complete all as specified and directed |
| 34 | S&F 30mm thick 2nd class hardwood factory made glazed and skeleton door shutters doble leaf, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and directed. |
| 35 | S&F 35mm thick 2nd class hardwood Plain framed panelled shutters two(panelled) double leaf with lock rail and 9mm B.W.P commercial ply 12mm veneered particle board with commercial veneering on both face. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressed treated fixed to chowkats, complete all as specified and directed. |
| 36 | S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples etc., complete all as specified and directed. |
| 37 | S & F MS but hinges heavy weight , cold rolled mild steel 100 mm size etc, complete all as specified and directed. |
| 38 | S & F 150 mm size extruded aluminium handles fabricated type, anodised, complete all as specified and directed. |
| 39 | S & F 150 mm size aluminium anodised barrel tower bolts of extruded sections, complete all as specified and directed. |
| 40 | S & F 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple & fixed clips of sheet, cast or extruded section & fixed bolts & sliding bolts of extruded section or cast aluminium alloy, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 41 | S & F 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple & fixed clips of sheet, cast or extruded section & fixed bolts & sliding bolts of extruded section or cast aluminium alloy, complete all as specified and directed. Please Enable Macros to View BoQ information |
