|
| 1 | Chair Verandah Drg No FD-256 & FD-19/259 |
| 2 | M&L welding (full round of pipe as a one spot) of broken part of CHAIR VERANDAH as shown on Drawing No. FD-19, FD-256 & FD-259, rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats of (White Colour) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer , complete all as specified and as directed. |
| 3 | M&L removing of old leg / frame part of CHAIR VERANDAH and S&F new part/Leg portion made of 20 mm dia MS pipe of 1.6 mm wall thickness as per Drawing No. FD-19, FD-256 & FD-259 and welded, necessary preperation of surfaces, applying two coats of (White Colour) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer complete all as specified and as directed. |
| 4 | M&L Mild Steel Round Bar 12mm dia to cover the distance between RT & LT Leg alongwith the Seat Front Side or Rear Side of CHAIR VERANDAH as shown on Drawing No. FD-19, FD-256 & FD-259 and welded, necessary preperation of surfaces, applying two coats of (White Colour) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Bar, complete all as specified and as directed. |
| 5 | S&F HARD RUBBER SHOE superior quality (as approved) fixing to Leg of CHAIR VERANDAH as shown on Drawing No. FD-19, FD-256 & FD-259 including taking out unserviceable Shoe, complete all as specified and as directed. |
| 6 | M&L Re-canning of CHAIR VERANDAH in Godrej pattern with 4.0mm wide Half Round Oval Shape Plastic Cane (as approved) to Frame as shown on Drawing No. FD-19, FD-256 & FD-259 including taking out old/worn out Canning, complete all as specified and as directed. |
| 7 | M&L removing/scrapping old worn out Paint from Steel Frame of CHAIR VERANDAH (Drawing No. FD-19, FD-256 & FD-259) by Sand Paper/Scrapper and applying Two Coat of White Colour Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed. |
| 8 | Chair CB A Steel With Arms Drg No FD-75(m) |
| 9 | M&L SEAT FRAME made out of Second Class Hardwood of CHAIR CBA STEEL WITH ARMS, fixed with 4 No. of Machine Screw 75x3.0mm and Painting with Black Colour Synthetic Enamelled Paint (as approved) on Seat Frame, canning with superior quality of Plastic Cane 2.0mm Half Round Oval Shape for Seat and 3.0mm for Border as shown on Drawing No. FD-75(M) including taking out unserviceable Seat Frame, complete all as specified and as directed. |
| 10 | M&L BACK FRAME made out of Second Class Hardwood of CHAIR CBA STEEL WITH ARMS, fixed with 4 No. of Machine Screw 75x3.0mm and Painting with Black Colour Synthetic Enamelled Paint (as approved) on Seat Frame, canning with superior quality of Plastic Cane 2.0mm Half Round Oval Shape for Seat and 3.0mm for Border as shown on Drawing No. FD-75(M) including taking out unserviceable Back Frame, complete all as specified and as directed. |
| 11 | M&L ARMS REST made out of Second Class Hardwood of CHAIR CBA STEEL WITH ARMS, fixed with suitable size Screws and Painting with Black Colour Synthetic Enamelled Paint (as approved) on Back Frame as shown on Drawing No. FD-75(M) including taking out unserviceable Arms Rest, complete all as specified and as directed. |
| 12 | M&L Mild Steel Flat Iron 25x3.0mm as RUNNER of length 350mm (approx), making hole for fixing End and Other End welded to CHAIR CBA STEEL WITH ARMS size 35x25x3 mm, applying two coat of Synthetic Enamel Paint over a coat of Red Oxide Zinc Chrome Primer on Steel Surfaces as shown on Drawing No. FD-75(M) including taking out unserviceable Runner, complete all as specified and as directed. |
| 13 | S&F PVC CAP at the top of Back Steel Pipe of CHAIR CBA STEEL WITH ARMS as shown on Drawing No. FD-75(M) including taking out unserviceable Cap, complete all as specified and as directed. |
| 14 | S&F HARD RUBBER SHOE superior quality (as approved) fixing to Leg of CHAIR CBA STEEL WITH ARMS as shown on Drawing No. FD-75(M) including taking out unserviceable Shoe, complete all as specified and as directed. |
| 15 | M&L removing/scrapping old worn out Paint from exposed Steel Frame of CHAIR CBA STEEL WITH ARMS (Drawing No. FD-75(M)) by Sand Paper/ Scrapper and applying two coat of Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed. |
| 16 | Chair School with Hand Board Drg No FD-140/ FD-48/ FD/E6/MAP/05 |
| 17 | M&L Moulded PVC/wooden seat and back of CHAIR SCHOOL WITH HAND BOARD as shown on Drawing No. FD/E6/MAP/05/ FD-140/ FD-48 including taking out unserviceable seat back, complete all as specified and as directed. |
| 18 | M&L for Welding of Broken Leg with Mild Steel Round Pipe of size 20mm x 1.6 mm thick (as required) for CHAIR SCHOOL WITH HAND BOARD as shown on Drawing No. FD/E6/MAP/05/ FD-140/ FD-48, necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer complete all as specified and as directed. |
| 19 | M&L TOP of Chair school with handboard of MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHID), providing laminated Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, including taking out unserviceable Top, complete all as specified and as directed. |
| 20 | M&L removing/scrapping old worn out Paint from CHAIR SCHOOL WITH HAND BOARD (Drawing No. FD/E6/MAP/05/ FD-140/ FD-48) by Sand Paper/ Scrapper and applying Two Coats of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed. |
| 21 | M&L welding (full round on pipe as a one spot) of broken part of CHAIR SCHOOL WITH HAND BOARD as shown on Drawing No. FD/E6/MAP/05/ FD-140/ FD-48, rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable part, complete all as specified and as directed. |
| 22 | Chair verandah MAP Drg No FD/MAP-II/06 |
| 23 | M&L welding (full round of pipe as a one spot) of broken part of CHAIR VERANDAH MAP as shown on Drawing No. FD-19, FD-256 & FD-259, rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats of (White Colour) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer , complete all as specified and as directed. |
| 24 | M&L removing of old leg / frame part of CHAIR VERANDAH MAP and S&F new part/Leg portion made of 20 mm dia MS pipe of 1.6 mm wall thickness as per Drawing No. FD-19, FD-256 & FD-259 and welded, necessary preperation of surfaces, applying two coats of (White Colour) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer complete all as specified and as directed. |
| 25 | M&L Mild Steel Round Bar 12mm dia to cover the distance between RT & LT Leg alongwith the Seat Front Side or Rear Side of CHAIR VERANDAH MAP as shown on Drawing No. FD-19, FD-256 & FD-259 and welded, necessary preperation of surfaces, applying two coats of (White Colour) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Bar, complete all as specified and as directed. |
| 26 | S&F HARD RUBBER SHOE superior quality (as approved) fixing to Leg of CHAIR VERANDAH MAP as shown on Drawing No. FD-19, FD-256 & FD-259 including taking out unserviceable Shoe, complete all as specified and as directed. |
| 27 | S&F seat and back white colour for CHAIR VERANDAH MAP including taking out existing unserviceable seat & back of any description complete as shown in drawing and directed by Engineer-in-Charge. |
| 28 | M&L removing/scrapping old worn out Paint from Steel Frame of CHAIR VERANDAH MAP(Drawing No. FD-19, FD-256 & FD-259) by Sand Paper/Scrapper and applying Two Coat of White Colour Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed. |
| 29 | Almirah Large steel 1/2 H x 1/2 S Drg No FD/MAP/18, FD- 1033 |
| 30 | M&L SHELF made out of 1.0mm thick Mild Steel Sheet of ALMIRAH LARGE STEEL and made to shape and size as shown on Drawing No. FD/MAP/18, necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Shelf, complete all as specified and as directed. |
| 31 | M&L DOOR made out of 1.0mm thick Mild Steel Sheet of ALMIRAH LARGE STEEL and made to shape and size as shown on Drawing No. FD/MAP/18, necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Door, complete all as specified and as directed. |
| 32 | M&L LEG made out of 1.0mm thick Mild Steel Sheet of ALMIRAH LARGE STEEL and made to shape and size as shown on Drawing No. FD/MAP/18, necessary preperation of surfaces, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Leg, complete all as specified and as directed. |
| 33 | M&L LOCKING DEVICE made out of 1.0mm thick Mild Steel Sheet of ALMIRAH LARGE STEEL and made to shape and size as shown on Drawing No. FD/MAP/18 including taking out unserviceable Locking Device, complete all as specified and as directed. |
| 34 | M&L LOCK (MAKE : GODREJ) of ALMIRAH LARGE STEEL and fixing to Almirah as shown on Drawing No. FD/MAP/18 including taking out unserviceable Lock, complete all as specified and as directed. |
| 35 | M&L Mild Steel HANDLE (as approved) of ALMIRAH LARGE STEEL and fixing to Almirah as shown on Drawing No. FD/MAP/18 including taking out unserviceable Handle, complete all as specified and as directed. |
| 36 | M&L Mild Steel HINGE (as approved) 75mm in size suitable for ALMIRAH LARGE STEEL and fixing to Almirah as shown on Drawing No. FD/MAP/18 including taking out unserviceable Hinge, complete all as specified and as directed. |
| 37 | M&L preperation of old surfaces of ALMIRAH LARGE STEEL (Drawing No. FD/MAP/18) by Sand Paper/Scrapper and applying One Coat of Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed. |
| 38 | Bed Hard steel Drg No FD/E6/MAP/08R |
| 39 | M&L HEAD SIDE BOARD of BED HARD MS TUBING of Prelaminated Particle Board 18/19mm thick, exterior grade, ISI marked and fixing as shown on Drawing No. FD/E6/MAP/08R including taking out unserviceable Head Side Board, complete all as specified and as directed. |
| 40 | M&L FOOT REST BOARD of BED HARD MS TUBING of Prelaminated Particle Board 18/19mm thick, exterior grade, ISI marked and fixing as shown on Drawing No. FD/E6/MAP/08R including taking out unserviceable Foot Rest Board, complete all as specified and as directed. |
| 41 | M&L Plywood TOP 12mm thick BWR grade confirming to IS-303, ISI marked and fixing to BED HARD MS TUBING as shown on Drawing No. FD/E6/MAP/08R including taking out unserviceable Plywood Top, complete all as specified and as directed. |
| 42 | M&L MIDDLE STIFFENER made out from Mild Steel Square Tube/Pipe 25x25mm of 1.6mm wall thickness, adjusting existing 2 No. Stiffeners and fixing to BED HARD MS TUBING and fixing as shown on Drawing No. FD/E6/MAP/08R, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer, complete all as specified and as directed. |
| 43 | M&L Mild Steel CLIT of size 25x25x6mm with single hole on Short Rails for Support of Plywood Top and fixing to BED HARD MS TUBING and fixing as shown on Drawing No. FD/E6/MAP/08R, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer, complete all as specified and as directed. |
| 44 | M&L Complete removing/scrapping old worn out Paint on Steel Surfaces of BED HARD MS TUBING (Drawing No. FD/E6/MAP/08R by Sand Paper/Scrapper and applying One Coat of Synthetic Enamelled Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed. |
| 45 | S&F HARD RUBBER SHOE superior quality (as approved) fixing to Leg of BED HARD MS TUBING as shown on Drawing No.including taking out unserviceable Shoe, complete all as specified and as directed. |
| 46 | Charpoy MS Tubing with plywood top Drg No FD/MAP-II/01 |
| 47 | M&L Plywood TOP 12mm thick BWR grade confirming to IS-303, ISI marked and fixing to CHARPOY MS TUBING WITH PLYWOOD TOP as shown on Drawing No. FD/MAP-II/01 including taking out unserviceable Plywood Top, complete all as specified and as directed. |
| 48 | M&L MIDDLE STIFFENER made out from Mild Steel Square Tube/Pipe 25x25mm of 1.6mm wall thickness, adjusting existing 2 No. Stiffeners and fixing to CHARPOY MS TUBING WITH PLYWOOD TOP and fixing as shown on Drawing No. FD/MAP-II/01, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer, complete all as specified and as directed. |
| 49 | M&L Mild Steel CLIT of size 25x25x6mm with single hole on Short Rails for Support of Plywood Top and fixing to CHARPOY MS TUBING WITH PLYWOOD TOP and fixing as shown on Drawing No. FD/MAP-II/01, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer, complete all as specified and as directed. |
| 50 | M&L Complete removing/scrapping old worn out Paint on Steel Surfaces of CHARPOY MS TUBING WITH PLYWOOD TOP (Drawing No. FD/MAP-II/01 by Sand Paper/Scrapper and applying One Coat of Synthetic Enamelled Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed. |
| 51 | S&F HARD RUBBER SHOE superior quality (as approved) fixing to Leg of CHARPOY MS TUBING as shown on Drawing No.including taking out unserviceable Shoe, complete all as specified and as directed. |
| 52 | Table Dining Ors Drg No FD-165(M) |
| 53 | M&L TOP of TABLE DINING ORS of Block board Board 18/19 mm thick with 22 guage aluminium sheet (MAKE : GREEN PLY/CENTURY), shown on Drawing No. FD-165(M) including taking out unserviceable Top, complete all as specified and as directed. |
| 54 | M&L Mild Steel Square Pipe of size 20mm, 1.6mm thick as LEG having length from 300mm to 500mm and fixing/ welded to TABLE DINING ORS as shown on Drawing No. FD-165(M), applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Leg, complete all as specified and as directed. |
| 55 | M&L Mild Steel Square/Round Pipe of size 25mm, 1.6mm thick as LONG RAIL and fixing/welded to TABLE DINING ORS as shown on Drawing No. FD-165(M), applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Long Rail, complete all as specified and as directed. |
| 56 | M&L Mild Steel Square/Round Pipe of size 25mm, 1.6mm thick as SHORT RAIL and fixing/welded to TABLE DINING ORS as shown on Drawing No. FD-165(M), applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Short Rail, complete all as specified and as directed. |
| 57 | M&L Mild Steel Square/Round Pipe of size 25mm, 1.6mm thick as SIDE STIFFNER and fixing/welded to TABLE DINING ORS as shown on Drawing No. FD-165(M), applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Side Stiffner, complete all as specified and as directed. |
| 58 | M&L Mild Steel Square Pipe of size 25mm, 1.6mm thick as CENTRAL STIFFNER and fixing/welded to TABLE DINING ORS as shown on Drawing No. FD-165(M), applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Central Stiffner, complete all as specified and as directed. |
| 59 | M&L Complete removing/scrapping old worn out Paint from TABLE DINING ORS (Drawing No. FD-165(M) by Sand Paper/Scrapper and applying Two Coats of Synthetic Enamelled Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed. |
| 60 | S&F HARD RUBBER SHOE superior quality (as approved) fixing to Leg of TABLE DINING ORS as shown on Drawing No.including taking out unserviceable Shoe, complete all as specified and as directed. |
| 61 | Table Office Officer steel Drg No FD-84, 1003 |
| 62 | M&L TOP of TABLE OFFICE OFFICER STEEL of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ ARCHIED), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on Drawing No. FD-84 & FD-1003 including taking out unserviceable Top, complete all as specified and as directed. |
| 63 | M&L DRAWER made out of 1.6mm thick Mild Steel Sheet and fixing to TABLE OFFICE OFFICER STEEL as shown on Drawing No. FD-84 & FD-1003, necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Drawer, complete all as specified and as directed. |
| 64 | M&L CENTRAL STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE OFFICE OFFICER STEEL as shown on Drawing No. FD-84 & FD-1003, necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Central Stiffener, complete all as specified and as directed. |
| 65 | M&L SIDE STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE OFFICE OFFICER STEEL as shown on Drawing No. FD-84 & FD-1003, necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Side Stiffener, complete all as specified and as directed. |
| 66 | M&L LOCK (MAKE : GODREJ) of TABLE OFFICE OFFICER STEEL and fixing as shown on Drawing No. FD-84 & FD-1003 including taking out unserviceable Lock, complete all as specified and as directed. |
| 67 | M&L Mild Steel HANDLE of TABLE OFFICE OFFICER STEEL and fixing as shown on Drawing No. FD-84 & FD-1003 including taking out unserviceable Handle, complete all as specified and as directed. |
| 68 | M&L for Welding of Broken Leg with Mild Steel Square Pipe of size 25mm (as required) for TABLE OFFICE OFFICER STEEL as shown on Drawing No. FD-84 & FD-1003, necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including removal of unserviceable part complete all as specified and as directed. |
| 69 | M&L removing/scrapping old worn out Paint from TABLE OFFICE OFFICER STEEL (Drawing No. FD-84 & FD-1003) by Sand Paper/Scrapper and applying Two Coats of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed. |
| 70 | S&F HARD RUBBER SHOE superior quality (as approved) fixing to Leg of TABLE OFFICE OFFICER STEEL as shown on Drawing No.including taking out unserviceable Shoe, complete all as specified and as directed. |
| 71 | Table office clk steel Drg No Fd-84 , 381&1004 |
| 72 | M&L TOP of TABLE OFFICE CLERK STEEL of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading as shown on Drawing No. FD-84, FD-381 & FD-1004 including taking out unserviceable Top, complete all as specified and as directed. |
| 73 | M&L DRAWER made out of 1.6mm thick Mild Steel Sheet and fixing to TABLE OFFICE CLERK STEEL as shown on Drawing No. FD-84, FD-381 & FD-1004, necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Drawer, complete all as specified and as directed. |
| 74 | M&L CENTRAL STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE OFFICE CLERK STEEL as shown on Drawing No. FD-84, FD-381 & FD-1004, necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Central Stiffener, complete all as specified and as directed. |
| 75 | M&L SIDE STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE OFFICE CLERK STEEL as shown on Drawing No. FD-84, FD-381 & FD-1004, necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Side Stiffener, complete all as specified and as directed. |
| 76 | M&L LOCK (MAKE : GODREJ) of TABLE OFFICE CLERK STEEL and fixing as shown on Drawing No. FD-84, FD-381 & FD-1004 including taking out unserviceable Lock, complete all as specified and as directed. |
| 77 | M&L Mild Steel HANDLE of TABLE OFFICE CLERK STEEL and fixing as shown on Drawing No. FD-84, FD-381 & FD-1004 including taking out unserviceable Handle, complete all as specified and as directed. |
| 78 | M&L for Welding of Broken Leg with Mild Steel Square Pipe of size 25mm (as required) for TABLE OFFICE CLERK STEEL as shown on Drawing No. FD-84, FD-381 & FD-1004, necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including removal of unserviceable part complete all as specified and as directed. complete all as specified and as directed. |
| 79 | M&L removing/scrapping old worn out Paint from TABLE OFFICE CLERK STEEL (Drawing No. FD-84, FD-381 & FD-1004) by Sand Paper/ Scrapper and applying Two Coats of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed. |
| 80 | S&F HARD RUBBER SHOE superior quality (as approved) fixing to Leg of TABLE OFFICE CLERK STEEL as shown on Drawing No.including taking out unserviceable Shoe, complete all as specified and as directed. |
| 81 | Table 3'x2' without Drawer steel Drg No FD-1007 |
| 82 | M&L TOP of TABLE 3'X2' WITH OUT DRAWER of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on Drawing No. FD-1007 including taking out unserviceable Top, complete all as specified and as directed. |
| 83 | M&L CENTRAL STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE 3'X2' WITH OUT DRAWER as shown on Drawing No. FD-1007, necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unservice-able Central Stiffener, complete all as specified and as directed. |
| 84 | M&L SIDE STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE 3'X2' WITH OUT DRAWER as shown on Drawing No. FD-1007, necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Side Stiffener, complete all as specified and as directed. |
| 85 | M&L for Welding of Broken Leg with Mild Steel Square Pipe of size 25mm (as required) for TABLE 3'X2' WITH OUT DRAWER as shown on Drawing No. FD-1007, necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including removal of unserviceable part complete all as specified and as directed. complete all as specified and as directed. |
| 86 | M&L removing/scrapping old worn out Paint from TABLE 3'X2' WITH OUT DRAWER (Drawing No. FD-1007) by Sand Paper/ Scrapper and applying Two Coats of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed. |
| 87 | Table 3'x2' with Drawer steel Drg No FD-1008 |
| 88 | M&L TOP of TABLE 3'X2' WITH DRAWER of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading as shown on Drawing No. FD-1008 including taking out unserviceable Top, complete all as specified and as directed. |
| 89 | M&L DRAWER made out of 1.6mm thick Mild Steel Sheet and fixing to TABLE 3'X2' WITH DRAWER as shown on Drawing No. FD-1008, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Drawer, complete all as specified and as directed. |
| 90 | M&L CENTRAL STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE 3'X2' WITH DRAWER as shown on Drawing No. FD-1008, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unservice-able Central Stiffener, complete all as specified and as directed. |
| 91 | M&L SIDE STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE 3'X2' WITH DRAWER as shown on Drawing No. FD-1008, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Side Stiffener, complete all as specified and as directed. |
| 92 | M&L LOCK (MAKE : GODREJ) of TABLE 3'X2' WITH DRAWER and fixing as shown on Drawing No. FD-1008 including taking out unserviceable Lock, complete all as specified and as directed. |
| 93 | M&L Mild Steel HANDLE of TABLE 3'X2' WITH DRAWER and fixing as shown on Drawing No. FD-1008 including taking out unserviceable Handle, complete all as specified and as directed. |
| 94 | M&L for Welding of Broken Leg with Mild Steel Square Pipe of size 25mm (as required) for TABLE 3'X2' WITH DRAWER as shown on Drawing No. FD-1008, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including removal of unserviceable part complete all as specified and as directed. complete all as specified and as directed. |
| 95 | M&L removing/scrapping old worn out Paint from TABLE 3'X2' WITH DRAWER (Drawing No. FD-1008) by Sand Paper/ Scrapper and applying Two Coats of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed. |
| 96 | S&F HARD RUBBER SHOE superior quality (as approved) fixing to Leg of TABLE 3'X2' WITH DRAWER as shown on Drawing No.including taking out unserviceable Shoe, complete all as specified and as directed. |
| 97 | Table 900x 900mm steel Drg No FD-1009 |
| 98 | M&L TOP of TABLE 3'X3' WITH OUT DRAWER of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHIED), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on Drawing No. FD-1009 including taking out unserviceable Top, complete all as specified and as directed. |
| 99 | M&L for Welding of Broken Leg with Mild Steel Square Pipe of size 25mm (as required) for TABLE 3'X3' WITH OUT DRAWER as shown on Drawing No. FD-1009, necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer complete all as specified and as directed. |
| 100 | M&L removing/scrapping old worn out Paint from TABLE 3'X3' WITH OUT DRAWER (Drawing No. FD-1009) by Sand Paper/ Scrapper and applying Two Coats of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed. |
| 101 | M&L welding (full round on pipe as a one spot) of broken part of TABLE 3'X3' STEEL as shown on Drawing No. FD-1009, rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable part, complete all as specified and as directed. |
| 102 | S&F HARD RUBBER SHOE superior quality (as approved) fixing to Leg of TABLE 3'X2' WITH DRAWER as shown on Drawing No.including taking out unserviceable Shoe, complete all as specified and as directed. |
| 103 | Table Bed Side Drg No FD/E6/MAP-II/15(R) |
| 104 | M&L TOP of TABLE BED SIDE of MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHIED), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on Drawing including taking out unserviceable Top, complete all as specified and as directed. |
| 105 | M&L Side / Back of TABLE BED SIDE of MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHIED), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on Drawing including taking out unserviceable side/back, complete all as specified and as directed. |
| 106 | M&L UPPER DRAWER of TABLE BED SIDE of MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHIED) as shown on Drawing including taking out unserviceable Upper drawer, complete all as specified and as directed. |
| 107 | M&L LOWER DRAWER of TABLE BED SIDE of MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHIED) as shown on Drawing including taking out unserviceable lower drawer, complete all as specified and as directed. |
| 108 | M&L LEG of TABLE BED SIDE of MS squre pipe 25x25 mm x 1.6 mm as shown on Drawing including taking out unserviceable leg, complete all as specified and as directed. |
| 109 | S&F HARD RUBBER SHOE superior quality (as approved) fixing to Leg of Table Bed Side as shown on Drawing No.including taking out unserviceable Shoe, complete all as specified and as directed. |
| 110 | Table computer Drg No FD/E6/MAP/03 |
| 111 | M&L TOP of TABLE COMPUTER of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ ARCHIED), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on Drawing including taking out unserviceable Top, complete all as specified and as directed. |
| 112 | M&L DRAWER made out of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ ARCHIED) and fixing to TABLE COMPUTER as shown on Drawing , including taking out unserviceable Drawer, complete all as specified and as directed. |
| 113 | M&L LOCK (MAKE : GODREJ) of TABLE COMPUTER and fixing as shown on Drawing including taking out unserviceable Lock, complete all as specified and as directed. |
| 114 | M&L Mild Steel HANDLE of TABLE COMPUTER and fixing as shown on Drawing including taking out unserviceable Handle, complete all as specified and as directed. |
| 115 | S&F HARD RUBBER SHOE superior quality (as approved) fixing to Leg of TABLE COMPUTER as shown on Drawing No.including taking out unserviceable Shoe, complete all as specified and as directed. |
| 116 | Charpoy IP Folding plywood top Drg No FD-388 |
| 117 | M&L Plywood TOP 9 mm thick BWR grade confirming to IS-303, ISI marked and fixing to CHARPOY IP FOLDING WITH PLYWOOD TOP as shown on Drawing No. FD-388 including taking out unserviceable Plywood Top, complete all as specified and as directed. Make |
| 118 | M&L STIFFENER made out from Mild Steel round Tube/Pipe 25mm dia 2 mm wall thickness, of CHARPOY IP FOLDING WITH PLYWOOD TOP and fixing as shown on Drawing No. FD-388 applying two coats of Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer duly removing unserviceable stiffener complete all as specified and as directed. |
| 119 | M&L Mild Steel Gusset plate of size 120x120x5mm reveted with long rail and leg to CHARPOY MS TUBING WITH PLYWOOD TOP and fixing as shown on Drawing No. FD- 388, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer,duly removal of unserviceable plate complete all as specified and as directed. |
| 120 | M&L welding (full round on pipe as a one spot) of broken part of CHARPOY MS TUBING WITH PLYWOOD TOP as shown on Drawing No. FD-388, rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer , complete all as specified and as directed. |
| 121 | M&L removing of old leg / frame part of CHARPOY MS TUBING WITH PLYWOOD TOP and S&F new part/Leg portion made of 25 mm dia MS pipe of 2 mm wall thickness as per Drawing No. FD388 and welded, necessary preperation of surfaces, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer complete all as specified and as directed. |
| 122 | S&F HARD RUBBER SHOE superior quality (as approved) fixing to Leg of CHARPOY MS TUBING WITH PLYWOOD TOP as shown on Drawing No.including taking out unserviceable Shoe, complete all as specified and as directed. |
| 123 | M&L Complete removing/scrapping old worn out Paint on Steel Surfaces of CHARPOY IP FOLDING WITH PLYWOOD TOP (Drawing No. FD- 388 by Sand Paper/Scrapper and applying two Coat of Synthetic Enamelled Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed. Please Enable Macros to View BoQ information |
