Tender For Construction Hydraulic Isolation Structure (Shaft And Manifold), Palghar-Maharashtra

TDR : 56060419

Tender Notice
BOQ

7 Days Left

Palghar , Maharashtra

Tender Brief : Tender For Construction Hydraulic Isolation Structure (Shaft And Manifold)

Document Fees
₹ 11800 /-

EMD
₹ 193889.0 /-

Tender Value
₹ 1.93 Crore /-

Submission Date
27-06-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Part A Hydraulic Isolation Structure (Shaft) At Dahanu Gaon 500 mm dia. Shaft 18 m height with Additional pipe line work 600 Rmt. Length and Road Restoration work 600 Rmt. Length
2	Clearing grass and removal of rubbish up to a distance of 50 metres out side the periphery of the area .(PWD / SSR / 2022-23 / Page No.23 / I. No. 2.07)
3	Excavation for foundation / pipe trenches in Earth, soils of all types, sand, gravel and soft murum, Hard murum and boulders, W.B.M. road of strata, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. ( MJP / SSR / 2023-24 / Page No.37 / I. No. 1 )
4	Excavation for foundation / pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatreing, preparing the bed for foundation and excluding backfilling, etc. complete. ( MJP / SSR / 2023-24 / Page No.37 / I. No. 3 )
5	Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means. ( MJP / SSR / 2023-24 / Page No.38 / I. No. 7 )
6	Providing dry trap/granite/soling in 15 cm to 20 cm thick layers including hand packing and compacting, etc. complete. (Bd-A-12/264)(MJP/SSR/2023-24/ Secti&PE / Excavation Item No. 18/Page no.41)
7	Providing and laying in situ Cement Concrete M-15 of trap/granite/quartzite/gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. (Cement 5.90 bags / cum) Spec. No. - Bd E /1 Page No. 287 and B- 7, Page No. 38 MJP/SSR/2023-24/Section G Plain, reinforced and ready mix concrete / Item No.1/ Page no.47
8	Providing and laying in situ Cement Concrete of trap/ granite/quartzite / gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement) MJP/ SSR/ 2023-24 / Section G Plain, reinforced and ready mix concrete/ Item No.2/ Page no.47
9	Providing and fixing in position steel bar reinforcement of various diameters for RCC piles, caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete (including cost of binding wire). (Bd-F-17/306)
10	Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast treatment 12 mm thick in proportion 1:11/2:3 including scaffolding and fourteen days curing complete.PWD/SSR 2023-24 Plastering and Pointing Item No. 32.13/ Page No. 212
11	Providing and applying white-wash in two coats on old/new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete.PWD SSR 2023-24 Colouring/Item No. 36.03 Page No.230
12	Providing and applying colour-wash of approved colour and shade in one coat to new surface including scaffolding, brushing and brooming down (excluding base coats of white wash) etc. complete PWD/SSR 2023-24 Colouring/Item No. 36.04/Page No.230
13	Dewatering the excavated trenches and pools of water in the building trenches/pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel) c. complete. (Bd-A-9/261)MUP SSR 2023-24/Section E Excavation Item No.14 Page no.40Day 2 - Pumping hr is 6 hrs. and Pump Capacity 3 Hp
14	Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete.MJP/SSR/2023-24/Section E/Excavation Item No.15/Page no.40Total Excavation in cum 73.7955Total Work As per drawing Soling, PCC and RCC Raft 15.6155
15	Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border messages symbols etc. with approved colour shade paint complete, on M.S. angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge (PWD SSR 2022-23/Item No.6.36 /Page No. 60)
16	Painting letters upto 20 cm height complete brushes, coir brushers, dusting cleaning, including cost of paint etc. completePWD SSR 2023-23 Item No. 6.05 Page No. 46
17	Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epоху paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect,inspection charges, transportation to stores / site, and stacking, etc. complete.MJP/SSR/2023-2024/ Page No.70/L. No.7-d
18	Providing and supplying at site of ductile iron / spheroidal graphite (S.G.) iron D/F non rising spindle resil-ient seated glandless sluice valves with handwheel & without bypass arrangement. Valves in accordance with BS 5163 of PN-10/16 rated, with body and bonnet of ductile iron confirming to IS 1865Gr. 500/7 or Gr.400/15. Wedge fully encapsulated WRAS approved EPDM rubber (approved for drinking water), Wedge nut of brass, shaft of stainless steel 1.4021/1.4104, stemseals min. 3 nos. of NBR, internal fasteners of stainlesssteel A2. Body & Bonnet coated inside & outside with electrostatically applied epoxy powder coated blue colour (suitable for drinking water) as per DIN 30677 2& GSK guidelines with a coating thickness of min. 250 microns. Valvess hould be full bore & tight shut-off Flange drilling as per IS1538 raised face & pressure testing atmanu factures works shall be done as per IS14846. including transportation charges excluding GST levied by GOI & OM in all respect etc. complete. (For PN 10 & 16) 150 mm
19	200 mm (MJP/SSR/2023-2024/Page No. 159/I. No. 24))
20	Lowering, laying and jointing in position following C.L.D/F Reflex valves, Butterfly valves and Sluice valves including cost of alllabour jointing material, including nut bolts and giving satisfactory hydraulic testing etc complete (Rate for all class of valves.)150mm
21	200 mm MJP SSR 23-24 It + a)Page no 148
22	Giving satisfactory hydraulic testing of following C. L F Reflex valves, Butterfly valves and Suice valves.150 mm
23	200 mm MJP/SSR/23-24/ It. 4 b - iⅲ)/Page no. 148
24	Welding in all positions with required number of runs, for M.S. pipes internally and / or externally including gauging wherever necessary, fixing appurtenances and other accessories in connection with pipe laying work as per specification.Add. 15% MS Special weastage
25	Gas cutting (either square cut or V cut) pipes, plates, etc. of thicknessb) Above 5 mm Up to 10 mmMJP/SSR/2023-2024/Page No. 187/I. No. 12
26	Hydraulic testing of M.S. pipe line to specified pressure including cost of all materials and labour and water for testing for the length up to 1km., using reciprocating type pump swhich should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting if necessary. up to 600 mm DiaMUP SSR 2023-2024 Page No. 72 I No. 12
27	Hiring charges for machinersRent for JCB (8 to 10 MT)Rent JCB-1 Nos JCB x 8 Hr working x 1 Days work8.00 (MJP SSR 2023-24 Page No.15)
28	Rent for Crane (5 Tonne)Rent Crane - 2 Nos Crane x 10 Hr working x 1 Days work.(MJP/SSR/2023-24/Page No.15)
29	Internal Lining (food grade Epoxy) Providing and applying two part food grade polyamide cured solvent less epoxy lining, meeting BIS 16676on the internal surface of MS Pipe afterblast cleaning to SA 2½ with Anchor Profile of >75 Microns Using angular Steel Grit. The minimum dry film thickness (DFT) of internal lining shall be 400 micron (SSPC PA2). The epoxy coating should offer highest resistance to cathodic disbondment and provide excellent adhesion to steel. The manufacturer shall have the certificate issued in support of portable water service for tests of pH, turbidity, total hardness, chloride nitrate, iron, arsenic & fluoride as per IS 10500: 2003 and IS 16676: 2017. Site application shall not be permitted. The rates are including loading, unloading, handling and transportation of Pipe etc complete. MIP/SSR/2023-2024 Page No. 65 I No. 22
30	Glyscerine Filled Pressure gauge Bourdon's type as IS 3624:1987 MJP Mech. CSR 2023-24 It. No. PM-11 Pg. No. 10
31	Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cmincluding 1:48 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 Kilogram with frame etc complete.PWD_SSR/2022-23/Page No.25/SIN Page 124
32	Battery Operated electromagnetic flow meter Providing erecting, testingand commissioning of battery operated electro magnetic flow meterbuilt in GSM/GPRS (with Sim card charges for36 month validity) of various diameters as per the following specifications including 36 months guarantee etc. complete. MIP Mechanical-Electronic-CSR-For-Year-2023-24 WM4/Pg. No. 111
33	Carrying of detailed topographic survey by using total stationa longthe existing or new road including taking L-section and cross sectionat every 30 meter ROW, takingat least 10 spot levels per cross section, picking upall existing details inside the Row like electric telephone line, encroachments, structuresetc. connectingall theprimary total station control points by G.I.S. Benchmarks level or which ever available with department using auto level and preparing Auto CAD plan by using above data taking out 1 set of black and white print out on 50 micron polyster filmsheet A2 size and 2 sets of coloured printout on A2 size submitting soft copy all data on CD. Plain terrain New Aligment PWD_SSR 2022-23/Page No.17/SI. No.1.41
34	additional pipeline at Dahanu gav
35	Providing and supplying instandard lengths PolyethelenePipes,confirmingtoIS4984/14151 / 12786 / 13488withnesessary jointingmaterial likemechanicalconnector i.e.thread/ insert joint/ quick releasecoupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspectioncharges, loading / unloadingcharges, conveyancetothedepartmental stores&stacking thesame in closedshadeduly protecting from sunrays&rains, excludingGST leviedbyGI & GOM in all respect etc.complete Pipe size 90 mm Dia PE100 (MJP SSR 2023-24 / Pg. No. 123 / It. No.1)
36	Pipe size 110mm Dia PE100
37	Pipe size 200 mm Dia PE100
38	HDPE Specials Proividing and supplying (10 % of cost of pipes shall be considered for cost of specials for estimate purpose only)
39	Labour a. Excavation for foundation/pipe trenches in earth, soil of all types, sand, gravel & soft murum, including removing the excavated material upto a distance of 50 m and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling etc. complete. Lift 0.0 to 1.5 M (MJP SSR 2023-24 / It. No. 1 / Pg. No. 37)
40	b. Excavation for foundation/pipe trenches in hard murum and booulders, WBM road including removing the excavated material upto a distance of 50 m and lifts as below, stacking and spreading asdirected, manual dewatering, preparing the bed for foundation and excluding backfilling etc. complete.Lift 0.0 to 1.5 M ( MJP SSR 2023-24 / It. No. 2 / Pg. No. 37)
41	c. Excavation for foundation/pipe trenches in S.R & old cement & lime masonary foundation asphalt road including removing the excavated material up to a distance of 50 m metres and lift as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling etc. complete. Lift 0 to 1.5 M ( MJP SSR 2023-24 / It. No. 4 / Pg. No. 37)
42	d. Excavation for foundation / pipe trenches in hard rock by controlled blasting, including trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the area and lifts as below, normal dewatering, excluding backfilling, etc. complete. (Bd-A-5/259)( MJP SSR 2023-24 / It. No. 5 / Pg. No. 38)
43	e. Excavation for foundation/pipr trenches in hard rock & concrete road by chiselling wedging line drilling by mechanical means or by any other means other than blasting including trimming & levelling the bed removing the excavated material upto a distance of 50 mt beyond the area & lifts as below stacking as directed by EIC.normal dewatering excluding backfilling etc. complete. Lift 0 to 1.5 M (MJP SSR 2023-24 / It. No. 7 / Pg. No. 38)
44	Filling in plinth & floors murum bedding in trenches with approved murum from excavated materials from foundation/ trenches in 15 cm layers including watering and compaction etc. complete.(MJP SSR 2023-24 / It. No. 16 / Pg. No. 41)
45	Lowering,LayingandJointingH.D.P.E./ M.D.P.E.pipes inproperpositionincludingall specialsbycompression fitting/electrofusionand butt fusion jointingprocedureasper relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusionweldingmachinewithhydraulic jack, top loadingclampetc. andall labours as directedbyengineer inchargeasperIS-7634Part II ((Item No.2/a -iv/ Pg - 123/MJP SSR 2023-24)) Pipe size 90 mm Dia PE100 ((Item No.2/a -iv/ Pg - 123/MJP SSR 2023-24))
46	Pipe size 110mm Dia PE100 ((Item No.2/a -iv/ Pg - 123/MJP SSR 2023-24))
47	Pipe size 200 mm Dia PE100 ((Item No.2/a -iv/ Pg - 123/MJP SSR 2023-24))
48	Hydraulic testing of HDPE pipe line to specified pressure (Pipe size 90mm Dia PE100 (Item No.12 -iv/ Pg - 126 /MJP SSR 2023-24)
49	Pipe size 110mm Dia PE100 (Item No.12 -iv/ Pg - 126 /MJP SSR 2023-24)
50	Pipe size 200 mm Dia PE100 (Item No.12 -iv/ Pg - 126 /MJP SSR 2023-24)
51	Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15cm layers with all leads and lifts including consolidation, surcharging etc. complete.(Item No.15 /Pg - 40 /MJP SSR 2023-24)
52	Restoration Of road at Dahanu gav
53	Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. (Cement 5.90 bags / cum) Spec. No. - Bd E /1 Page No. 287 and B- 7, Page No. 38 (MJP/ SSR/ 2023-24 / Section G Plain, reinforced and ready mix concrete / Item No.1/ Page no.47)
54	construction hydraulic isolation structure (shaft)At.ager, Block Dahanu
55	Clearing grass and removal of rubbish up to a distance of 50 metres out side the periphery of the area .PWD / SSR / 2022-23 / Page No.23 / I. No. 2.07
56	Excavation for foundation / pipe trenches in Earth, soils of all types, sand, gravel and soft murum, Hard murum and boulders, W.B.M. road of strata, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.( MJP / SSR / 2023-24 / Page No.37 / I. No. 1 )
57	Excavation for foundation / pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatreing, preparing the bed for foundation and excluding backfilling, etc. complete. ( MJP / SSR / 2023-24 / Page No.37 / I. No. 3 )
58	Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means. ( MJP / SSR / 2023-24 / Page No.38 / I. No. 7 )
59	providing dry trap/granite/quartzite/gneiss, rubble stone soling in 15 cm to 20 cm thick layers including hand packing and compacting etc.complete (Bd-A-12/264) (MJP/SSR/2023-24/section E/ Excavation Item No.18/page no.41)
60	providing and laying in situ cement concrete M-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete.(cement 5.90 bages/cum) spec. No. -BdE/1 Page No.287 and B-7, Page No.38 (MJP/ SSR /2023-24 / section G plain, reinforced and ready mix concrete / Item No. 1 /Page no.47)
61	providing and laying in situ cement concrete of trap/ granite / quartzite /gneiss metal for RCC work in foundation like raft, grillage , strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing,etc. complete.(By weigh batching and mix desing for M and M-300 only. Use of L & T, A.C.C., Ambuja,Birla Gold, Manikgad Rajashree, etc . cement is permitted)(Excluding M.S.or Tor reinforcement) (MJP/ SSR/2023-24/ section G Plain reinforced and ready mix concrete ItemNo.2 Page no.47)
62	providing and laying in situ cement concrete of trap/ granite / quartzite /gneiss metal for RCC piles,caps, footings,foundations, slabs, beams, columns,canings, fins, arches, etc. As per detailed designs, drawings and schedules, includiong cutting bending, hooking the bars, binding with wires or tack ewlding and supporting as required, etc. complete(including cost of binding wire )(Bd-F-17/306)(MJP/ SSR/ 2023-24 /section G Plain, reinforced and ready mix concrete / Item No.8 /Page no.50)
63	providing rough cast cement plaster externally in two coats to concrete, brick or stone masomry surfaces in all position with base coat of 12 to 15 mm thick in C.M.1:4 and rough cast treament 12 mm thick in proportion 1:11/ 2:3 including scaffolding and fourteen days curing complete.(PWD/ SSR 2023-24/ Plastering and Pointing Item No.32.13/ Page No.212)
64	providing and applying white - wash in two coats on old/ new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface bybrushing and brooming down (excluding base coats of white wash) ets. Complete.(PWD/ SSR 2023-24 colouring Item No.36.03/Page No.230)
65	Providing and applying colour-wash of approved colour and shade in one coat to new surface including scaffolding, brushing and brooming down (excluding base coats of white wash) etc. complete.15.86Sqm 10.50166PWD SSR 2023-24/ Colouring/Item No. 36.04/Page No.230
66	Dewatering the excavated trenches and pools of water in the building trenches / pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete. (Bd-A-9/261) MJP/SSR/2023-24/ Section E / Excavation Item No. 14/Page no.40 Day 2 - Pumping hr. is 6 hrs. and Pump Capacity 3 Hp
67	Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete.MJP/SSR/2023-24/Section E/Excavation Item No.15/Page no.40 Total Excavation in cum 88.0785Total Work As per drawing Soling, PCC and RCC Raft 17.4905
68	Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border/messages/symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc. and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in ChargePWD/SSR 2022-23 Item No.6.36 Page No. 60
69	Painting letters upto 20 cm height complete brushes, coir brushers, dusting, cleaning, including cost of paint etc. complete.PWD/SSR/2023-23/Item No. 6.05 /Page No. 46
70	Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores / site, and stacking, etc. complete. MJP/SSR/2023-2024/Page No.70/L No.7-d
71	Providing and supplying at site of ductile iron / spheroidal graphite (S.G.) iron D/F non rising spindle resil-ient seated glandless sluice valves with handwheel & without bypass arrangement. Valves in accordance with BS 5163 of PN-10/16 rated, with body and bonnet of ductile iron confirming to IS 1865Gr. 500/7 or Gr.400/15. Wedge fully encapsulated WRAS approved EPDM rubber (approved for drinking water), Wedge nut of brass, shaft of stainless steel 1.4021/1.4104, stemseals min. 3 nos, of NBR, internal fasteners of stainlesssteel A2. Body & Bonnet coated inside & outside with electrostatically applied epoxy powder coated blue colour (suitable for drinking water) as per DIN 30677 2& GSK guidelines with a coating thickness of min. 250 microns. Valvess hould be full bore & tight shut-off. Flange drilling as per IS1538 raised face & pressure testing atmanu factures works shall be done as per IS14846. including transportation charges excluding GST levied by GOI & GOM in all respect etc complete. (For PN 10 & 16) 150 mm
72	200 mm (MJP/SSR/2023-2024/Page No.159/I. No. 24)
73	Lowering, laying and jointing in position following C.L.D/F Reflex valves, Butterfly valves and Sluice valves including cost of alllabour jointing material, including nut bolts and giving satisfactory hydraulic testing etc complete (Rate for all class of valves.)150mm
74	200 mm MJP SSR 23-24 It + a)Page no 148
75	Giving satisfactory hydraulic testing of following C. L F Reflex valves, Butterfly valves and Suice valves.150 mm
76	200 mm MJP/SSR/23-24/ It. 4 b - iⅲ)/Page no. 148
77	Welding in all positions with required number of runs, for M.S. pipes internally and / or externally including gauging wherever necessary, fixing appurtenances and other accessories in connection with pipe laying work as per specification.Add. 15% MS Special weastage
78	Gas cutting (either square cut or V cut) pipes, plates, etc. of thicknessb) Above 5 mm Up to 10 mmMJP/SSR/2023-2024/Page No. 187/I. No. 12
79	Hydraulic testing of M.S. pipe line to specified pressure including cost of all materials and labour and water for testing for the length up to 1km., using reciprocating type pump swhich should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting if necessary. up to 600 mm DiaMUP SSR 2023-2024 Page No. 72 I No. 12
80	Hiring charges for machinersRent for JCB (8 to 10 MT)Rent JCB-1 Nos JCB x 8 Hr working x 1 Days work8.00 (MJP SSR 2023-24 Page No.15)
81	Rent for Crane (5 Tonne)Rent Crane - 2 Nos Crane x 10 Hr working x 1 Days work.(MJP/SSR/2023-24/Page No.15)
82	Internal Lining (food grade Epoxy) Providing and applying two part food grade polyamide cured solvent less epoxy lining, meeting BIS 16676on the internal surface of MS Pipe afterblast cleaning to SA 2½ with Anchor Profile of >75 Microns Using angular Steel Grit. The minimum dry film thickness (DFT) of internal lining shall be 400 micron (SSPC PA2). The epoxy coating should offer highest resistance to cathodic disbondment and provide excellent adhesion to steel. The manufacturer shall have the certificate issued in support of portable water service for tests of pH, turbidity, total hardness, chloride nitrate, iron, arsenic & fluoride as per IS 10500: 2003 and IS 16676: 2017. Site application shall not be permitted. The rates are including loading, unloading, handling and transportation of Pipe etc complete. MIP/SSR/2023-2024 Page No. 65 I No. 22
83	Glyscerine Filled Pressure gauge Bourdon's type as IS 3624:1987 MJP Mech. CSR 2023-24 It. No. PM-11 Pg. No. 10
84	Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cmincluding 1:48 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 Kilogram with frame etc complete.PWD_SSR/2022-23/Page No.25/SIN Page 124
85	Battery Operated electromagnetic flow meter Providing erecting, testingand commissioning of battery operated electro magnetic flow meterbuilt in GSM/GPRS (with Sim card charges for36 month validity) of various diameters as per the following specifications including 36 months guarantee etc. complete. MIP Mechanical-Electronic-CSR-For-Year-2023-24 WM4/Pg. No. 111
86	Carrying of detailed topographic survey by using total stationa longthe existing or new road including taking L-section and cross sectionat every 30 meter ROW, takingat least 10 spot levels per cross section, picking upall existing details inside the Row like electric telephone line, encroachments, structuresetc. connectingall theprimary total station control points by G.I.S. Benchmarks level or which ever available with department using auto level and preparing Auto CAD plan by using above data taking out 1 set of black and white print out on 50 micron polyster filmsheet A2 size and 2 sets of coloured printout on A2 size submitting soft copy all data on CD. Plain PWD_SSR 2022-23/Page No.17/SI. No.1.41
87	Additional pipeline at Agar
88	Providingandsupplying instandard lengths PolyethelenePipes,confirmingtoIS4984/14151 / 12786 / 13488withnesessary jointingmaterial likemechanicalconnector i.e.thread/ insert joint/ quick releasecoupler joint / compression fitting Joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspectioncharges, loading / unloadingcharges, conveyancetothedepartmental stores&stacking thesame in closedshadeduly protecting from sunrays&rains, excludingGST leviedbyGI & GOM in all respect etc.complete (pipe size 160 mm Dia PE 100) (MJP SSR 2023-24 / Pg. No. 123 / It. No.1)
89	(pipe size 200 mm Dia PE 100( MJP SSR 2023-24 / Pg. No. 123 / It. No.1)
90	HDPE Specials Proividing and supplying (10 % of cost of pipes shall be considered for cost of specials for estimate purpose only)
91	Labour a.Excavation for foundation/pipe trenches in earth, soil of all types, sand, gravel & soft murum, including removing the excavated material upto a distance of 50 m and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling etc. complete Lift 0.00 to 1.50 M(.MJP SSR 2023-24 / It. No. 1 / Pg. No. 37)
92	b.Excavation for foundation/pipe trenches in hard murum and booulders, WBM road including removing the excavated material upto a distance of 50 m and lifts as below, stacking and spreading asdirected, manual dewatering, preparing the bed for foundation and excluding backfilling etc. complete.Lift 0 to 1.5 M (MJP SSR 2023-24 / It. No. 2 / Pg. No. 37)
93	c. Excavation for foundation/pipe trenches in S.R & old cement & lime masonary foundation asphalt road including removing the excavated material up to a distance of 50 m metres and lift as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling etc. complete. Lift 0 to 1.5 M (MJP SSR 2023-24 / It. No. 4 / Pg. No. 37)
94	d. Excavation for foundation / pipe trenches in hard rock by controlled blasting, including trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the area and lifts as below, normal dewatering, excluding backfilling, etc. complete. (Bd-A-5/259) (MJP SSR 2023-24 / It. No. 5 / Pg. No. 38)
95	e. Excavation for foundation/pipr trenches in hard rock & concrete road by chiselling wedging line drilling by mechanical means or by any other means other than blasting including trimming & levelling the bed removing the excavated material upto a distance of 50 mt beyond the area & lifts as below stacking as directed by EIC.normal dewatering excluding backfilling etc. complete.Lift 0 to 1.5
96	Filling in plinth & floors murum bedding in trenches with approved murum from excavated materials from foundation/ trenches in 15 cm layers including watering and compaction etc. complete. (MJP SSR 2023-24 / It. No. 16 / Pg. No. 41)
97	Lowering,LayingandJointingH.D.P.E./ M.D.P.E.pipes inproper position including all specialsbycompression fitting/electrofusionand butt fusion jointing procedureasper relevent I Code complete with all materials for jointing procedure like Electrofusion machine, Electri heater/butt fusionweldingmachinewithhydraulic jack, top loadingclampetc. andall labours as directedbyengineer inchargeasperIS-7634Part II Pipe Size 160 mm Dia PE100 ((Item No.2/a -iv/ Pg - 123/MJP SSR 2023-24))
98	Pipe Size 200 mm Dia PE100 ((Item No.2/a -iv/ Pg - 123/MJP SSR 2023-24))
99	Hydraulic testing of HDPE pipe line to specified pressure ((Item No.12 -iv/ Pg - 126 /MJP SSR 2023-24)) Pipe Size 160 mm Dia PE100
100	Pipe Size 200 mm Dia PE100 ((Item No.12 -iv/ Pg - 126 /MJP SSR 2023-24))
101	Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15cm layers with all leads and lifts including consolidation, surcharging etc. complete.(Item No.15 /Pg - 40 /MJP SSR 2023-24)
102	Construction Hydraulic Isolation Structure (Shaft and Manifold) Hydraulic Isolation Structure (Manifold) 650 mm diameter double drum At. Brahman, Pada ESR ABSTRACT SHEET - MANIFOLD
103	Clearing grass and removal of rubbish up to a distance of 50 metres out side the periphery of the area.PWD/SSR/2022-23/ Page No.23 / I. No. 2.07Rate (4.00) + 5% Corporation Charges (0.20) = Rs. 4.20
104	Excavation for foundation/pipe trenches in Earth, soils of all types, sand, gravel and soft murum, Hard murum and boulders, W.B.M. road of strata, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete(MJP SSR 2023-24/Page No.37/I No. 1)Rate (165.00)+5% Corporation Charges (8.25) = Rs. 173.25
105	Excavation for foundation/pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatreing, preparing the bed for foundation and excluding backfilling, etc. complete.(MJP/SSR/2023-24/Page No.37 / No.3)Rate (211.00) + 5% Corporation Charges (10.55) = Rs 221.55
106	Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering excluding backfilling, etc. complete by all means. (MJP SSR 2023-24/Page No.38/L. No. 7) Rate (1119.00) -5% Corporation Charges (55.95) = Rs. 1174.95
107	Providing dry trap/ granite/ quartzite/ gneiss, rubble stone soling in 15 cm to 20 cm thick layers including hand packing and compacting, etc. complete. (Bd-A-12/264) MJP/SSR/2023-24/ Section E/ Excavation Item No.18/Page no.41 Rate (1316.00) +5% Corporation Charges (65.80) = Rs. 1381.80
108	Providing and laying in situ Cement Concrete M-15 of trap/ granite/quartzite/gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. (Cement 5.90 bags cum) Spec. No. -Bd E /1 Page No. 287 and B-7, Page No. 38 MJP/SSR/2023-24/ Section G Plain reinforced and ready mix concrete Item No 1/Page no.47Rate (5881.00) +5% Corporation Charges (294.05) = Rs. 6175.05
109	Providing and laying in situ Cement Concrete of trap/granite / quartzite / gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement MJP/SSR/2023-24/ Section G Plain, reinforced and ready mix concrete / Item No.2/ Page no.47Rate (8193.00) + 5% Corporation Charges (409.65) = Rs. 8602.65
110	Providing and casting in situ C.C. of trap/granite/quartzite/gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with CM 1:3 of sufficient 8 minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only Use of L&T AC C., Ambuja, Birla Gold, Manikgad, Rajashree, etc cement is permitted.) (Excluding M.S.. or Tor reinforcement) MJP SSR 2023-24 Section G Plain, reinforced and ready mix concrete / Item No.5/ Page no. 18Rate (10172.00) + 5% Corporation Charges (508.60) = Rs. 10680.60
111	Providing and fixing in position steel bar reinforcement of various diameters for RCC piles, caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete (including cost of binding wire). (Bd-F-17/306) MJP/ SSR 2023-24 Section G Plain, reinforced and ready mix concrete Item No.S Page no.50 Rate (86091.00) +5% Corporation Charges (4304.55) = Rs. 90395.55
112	Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast treatment 12 mm thick in proportion 1:11/2:3 including scaffolding and fourteen days curing completePWD/SSR 2023-24/ Plastering and Pointing/Item No. 32.13/ Page No. 212 Rate (583.00) +5% Corporation Charges (29.15) = Rs. 612.15
113	Providing and applying white-wash in two coats on old new plastered or masonry surfaces and as stos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete.PWD SSR 2023-24 Colouring/Item No. 36.03 Page /Page No.230Rate (12.00) +5% Corporation Charges (0.6) = Rs 12.60
114	Providing and applying colour-wash of approved colour and shade in one coat to new surface including scaffolding, brushing and brooming down (excluding base coats of white wash) etc. complete.PWD/SSR 2023-24/ Colouring/Item No. 36.04/Page No.230 Rate (10) + 5% Corporation Charges (0.5) = Rs 10.50
115	Dewatering the excavated trenches and pools of water in the building trenches/pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete. (Bd-A-9/261) Day 2 - Pumping hr. is 6 hrs. and Pump Capacity 3 Hp MIP SSR 2023-24 Section E Excavation Item No.14 Page no.40 Rate (89) + 5% Corporation Charges (4.45) = Rs 93.45
116	Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete.Item no 2, 3 & 4 total Excavation in cum144.54\\" deduction item no 5, 6 & 7Item no total Work As per drawing BBM, Soling, PCC and Raft 15.531MJP/SSR/ 2023-24/ Section E / Excavation Item No.15/Page no.40Rate (92) + 5% Corporation Charges (4.6) = Rs 96.60
117	Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.2m * 0.9m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border/messages/symbols etc with approved colour shade paint complete, on M.S.angle of size 35 * 35 * 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc and fixing the boards in 1.4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling transportation, and labour etc complete. Spec No. As directed by Engineer in Charge PWD SSR/2022-23 Item No. 6.36 Page No. 61)Rate (9963.00)-5% Corporation Charges (498.15)= Rs. 10461.15
118	Painting letters upto 20 cm height complete brushes, coir brushers, dusting, cleaning, including cost of paint etc. complete PWD SSR 2023-23 Itein No 605 Page No. 40 Rate (2900)-5% Corporation Charges (145) = Rs 30.45
119	Providing and supplying ISI standard MS specials o required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores site, and stacking, etc. complete. MJP /SSR/2023-2024/Page No.70/L. No.7-d Rate (95.00) + 5% Corporation Charges (4.75) = Rs. 99.75
120	Providing double flange sluice valve confirming for IS-14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete400 mm
121	200 mm (MJP/SSR/2023-2024/Page No.159/I. No. 24)
122	150 mm
123	80 mmMUP SSR 2023-2024 Pa No 159 1 No 24
124	Lowering, laying and jointing in position following CLD/F Reflex valves, Butterfly valves and Sluice valves including cost of alllabour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.)400 mm Rate (8357) +5% Corporation Charges
125	200 mm Rate (4160) +5% Corporation Charges
126	150 mm Rate (3998) + 5% Corporation Charges
127	80 mm Rate (1947) +5% Corporation Charges MJP/SSR/23-24/It. 4 a-in)/Page no. 148
128	Providing and supplying Kinetic Double Orifice type Air Valves confirming to IS 14845asperMJP'sstandardspecifications havingsmall orificeelasticball restingona gunmetalorificenipple, largeorificevulcanite ballseatingonmouldedseat ring withbuilt-in Kinetic features, isolating sluice valve mounted inhorizontal position and operated by wheel gearing, inlet face and drilled, including insurance, third party inspection charges, loading, unloading transportation upto departmental stores, excluding GST levied by OI & GOM in all respect etc. complete 150 mmb) Kinetic Air Valve Flanged Type - PN-1.6MJP/ SSR/ 2023-24 Section-I (XII) Pipe Appurtenances Item No 9-a & d Page no.151
129	Lowering, laying and fixing in proper alignment andpositionall types of C.I. air valves as directed by Engineer-in-charge including cost of conveyance fremstores to site of work, cost of all material and giving satisfactory hydraulic testing, etc complete. (for all class of valves) 150 mmc) Kinetic Air Valve (PN-1andPN-1.6)MUP SSR 2023-24 Section-I (XII) Appurtenances Item No 10 Paze no. 152Rate (883.00) +5% Corporation Charges (44.15) = Rs. 927.15
130	Welding in all positions with required number of runs, for M.S. pipes internally and / or externally including gauging wherever necessary, fixing appurtenances and other accessories in connection with pipe laying work as per specificationMJP/SSR/2023-2024 / Page No.186 / I. No. 7A (v)Rate (1154.00) +5% Corporation Charges (57.70) = Rs. 1211.70
131	Gas cutting (either square cut or V cut) pipes, plates, etc. of thicknessb) Above 5 mm Up to 10 mmMJP/SSR/2023-2024/Page No.187/L. No. 12Rate (149.00) +5% Corporation Charges (7.45) = Rs. 156.45
132	Making cross connection to existing distribution main of any type including excavation, breaking & removing existing pipes, lowering laying of specials & pipes in their position refilling closing the water supply in that area, dewatering & restarting the water supply etc complete as directed by Engineer-in-charge for following diameter of existing pipeline, irrespective of diameter of branch line (the number of joints involved will be paid separately depending upon the nature of joints & required pipes,valves & specials will be supplied free of cost at stores) specials will be upplied free of cost at stores) specials will be 150 mmRate (4182.00) +5% Corporation Charges (209.10) = Rs. 4391.10
133	200 mmRate (4378.00) -5% Corporation Charges (218.90) = Rs. 4596.90
134	250 mmRate (5200.00) -5% Corporation Charges (260.00) = Rs. 5460.00
135	300 mmRs. 6506.85 Rate (6197.00)-5% Corporation Charges (309.85) = MUP SSR 2023-2024 Page No.58 I
136	Hiring charges for machinersRent for JCB (8 to 10 MT)1 nos crane x 8 Hr x 1 days)MJP/SSR/2023-24/Page No.15Rate (1401.00) +5% Corporation Charges (70.05) = Rs. 1471.05
137	Rent for Crane (5 Tonne)(1 nos crane x 8 Hr x 1 days)MJP/SSR/2023-24/Page No.15Rate (1879.00) +5% Corporation Charges (93.95) = Rs. 1972.95
138	Internal Lining (food grade Epoxy) Providing and applying two part food grade polyamide cured solvent less epoxy lining, meeting BIS 16676on the internal surface of MS Pipe afterblast cleaning to SA 2% with Anchor Profile of >75 Microns Using angular Steel Grit. The minimum dry film thickness (DFT) of internal lining shall be 400 micron (SSPC PA2). The epoxy coating should offer highest resistance to cathodic disbondment and provide excellent adhesion to steel. support of portable water service for tests of pil nurbidity, total hardness, chloride nitrate, fron, arsenie & fluoride as per IS 10500 2003 and IS 166762017 Sire application shall not be permitted. The rates are including leading, unleading, handling and transportation of Pige etc complete (MJP/SSR/2023-2024 / Page No.65 / I. No. 22)Rate (417.00) +5% Corporation Charges (20.85) = Rs. 437.85
139	Glyscerine Filled Pressure gauge Bourdon's type as IS 3624:1987+ MJP Mech. CSR 2023-24/It. No. PM-11 Pg. No. 10Rate (2010.00) - 5% Corporation Charges (100.50) = Rs. 2110.50
140	Disposal of surplus excavated material up to 2.00 km lead including loading unloading transportation etc. as directed by engineer-incharge.PWD SSR 2022-23 Page No 559 Statement C1Rate (203.32) +5% Corporation Charges (10.17) = Rs. 213.49
141	Battery Operated electromagnetic flow meter Providing, erecting, testingand commissioning of battery operated electro magnetic flow meterbuilt in GSM/GPRS (with Sim card charges for36 month validity) of various diameters as per the following specifications including 36 months guarantee etc. complete.200 mmMJP/Mechanical-Electronic-CSR-For-Year-2023-24 WM4/Pg. No. 111Rate (185837)+5% Corporation Charges (9291.85) = Rs. 195128.85
142	Carrying of detailed topographic survey by using total stationa longthe existing or new road including taking L-section and cross sectionat every 30 meter ROW,C takingat least 10 spot levels per cross section, picking upall existing details inside the Row like electric telephone line, encroachments, structuresetc. connectingall theprimary total station control points by G.I.S. Benchmarks level or which ever available with department using auto level and preparing Auto CAD plan by using above data taking out 1 set of black and white print out on 50 micron polyster filmsheet A2 size and 2 sets of coloured printout on A2 size submitting soft copy all data on CD. Plain Terrain New AlignmentPWD_SSR/2022-23/Page No. 17 SL. No. 1.41
143	Hydraulic Isolation Structure (Manifold) 400 mm diameter double drum At. Loni, Pada ESR
144	Clearing grass and removal of rubbish up to a distance of 50 metres out side the periphery of the area.PWD/SSR/2022-23/Page No.23 / I. No. 2.07Rate (4.00) + 5% Corporation Charges (0.20) = Rs. 4.20
145	Excavation for foundation/pipe trenches in Earth, soils of all types, sand, gravel and soft myrum, Hard murum and boulders, W.B.M. road of strata, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.(MJP/SSR/2023-24/Page No.37/I. No. 1)Rate (165.00)+5% Corporation Charges (8.25) = Rs. 173.25
146	Excavation for foundation pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatreing preparing the bed for foundation and excluding backfilling, etc. complete MJP SSR 2023-24 Page No.37 1 No 3)Rate (211.00) +5% Corporation Charges (10.55) = Rs. 221.55
147	Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering excluding backfilling, etc. complete by all means.(MJP/SSR/2023-24/Page No.38/I. No. 7)Rate (1119.00) + 5% Corporation Charges (55.95) = Rs. 1174.95
148	Providing dry trap granite quartzite gneiss, rubble stone soling in 15 cm to 20 cm thick layers including hand packing and compacting, etc. complete. (Bd-A-12/264)MJP/ SSR 2023-24 Section E Excavation Item No.18 Page no.41Rate (1316.00) -5% Corporation Charges (65.80) = Rs. 1381.80
149	Providing and laying in situ Cement Concrete M-15 of trap/granite/quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. (Cement 5.90 bags/cum) Spec. No. - Bd E /1 Page No. 287 and B-7, Page No. 38MJP/SSR/2023-24/ Section G Plain, reinforced and ready mix concrete / Item No.1/ Page no.47Rate (5881.00) + 5% Corporation Charges (294.05) = Rs. 6175.05
150	Providing and laying in situ Cement Concrete of trap/granite / quartzite / gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M250 and M-300 only. Use of L&T, A.C.C. Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement)MIP/SSR 2023-24 Section G Plain reinforced and ready mix concrete Item No.2 Page no.47Rate (8193.00)-5% Corporation Charges (409.65) Rs. 8602.65
151	Providing and casting in situ C.C. of trap granite quartzite gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering centering, form work, compaction, finishing the formed surfaces with C.M. 13 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc., cement is permitted.) (Excluding M.S. or Tor reinforcement) MJP/SSR/2023-24/ Section G Plain, reinforced and ready mix concrete/ Item No.5 Page no. 18Rate (10172.00) + 5% Corporation Charges (508.60) = Rs. 10680.60
152	Providing and fixing in position of various diameters for RCC piles, caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules, including cutting bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete (including cost of binding wire). (Bd-F-17-306)MIP SSR 2023-24 Section G Plain, reinforced and ready mix concrete Item No 3/ Page no. 50Rate (86091.00)-5% Corporation Charges (4304.55) = Rs. 90395.55
153	Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast treatment 12 mm thick in proportion 1:11/23 including scaffolding and fourteen days curing complete.PWD SSR 2023-24 Plastering and Pointing Item No. 32.13 Page No. 212Rate (583.00)+5% Corporation Charges (29.15) = Rs. 612.15
154	Providing and applying white-wash in two coats on old new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete.PWD SSR 2023-24 Colouring Item No. 36 03 Page No.230Rate (10.00) +5% Corporation Charges (0.50) = Rs. 10.50
155	Providing and applying colour-wash of approved colour and shade in one coat to new surface including scaffolding, brushing and brooming down (excluding base coats of white wash) etc. complete.PWD/SSR 2023-24/ Colouring/Item No. 36.04/Page No.230Rate (10.00) +5% Corporation Charges (0.50) = Rs. 10.50
156	Dewatering the excavated trenches and pools of water in the building trenches pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete. (Bd-A-9/261)Day 2 - Pumping hr. is 6 hrs. and Pump Capacity 3 HpMMIP SSR 2023-24 Section E No.14 Page no 40 Excavation ItemRate (89.00) -5°. Corporation Charges (445) = Rs. 93.45
157	Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete.Item no 2, 3 & 4 total Excavation in cum 144.54 deduction item no 5, 6 & 7Item no total Work As per drawing BBM, Soling, PCC and Raft 15.531MJP/SSR/ 2023-24/ Section EExcavation Item No.15 Page no.40 Page (4.6) = RsRate (92) + 5% Corporation Charges 96.60
158	Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border/messages/symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc. and fixing the boards in 1.4.8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling. transportation, and labour etc complete. Spec. No. As directed by Engineer in ChargePWD SSR. 2022-23 Item No.6.36 /Page No. 60 Rate (9963.00)+5% Corporation Charges (498.15) = Rs. 10461.15
159	Painting letters upto 20 cm height complete brushes, coir brushers, dusting, cleaning, including cost of paint etc. complete.PWD SSR 2023-23/Item No. 6.05 Page No. 46 Rate (29.00) -5% Corporation Charges (1.45) = Rs. 30.45
160	Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores/site, and stacking, etc. complete.MJP/SSR/2023-2024/ Page No.70 / I. No.7-dRate (95.00) +5% Corporation Charges (4.75) = Rs. 99.75
161	Providing double flange shuice valve confirming for IS-14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. 200 mm
162	150 mm
163	100 mm
164	80 mm(MJP/SSR/2023-2024 Page No.159/L No. 24)
165	Lowering, laying and jointing in position following CIDF Reflex valves, Butterfly valves and Sluice valves including cost of alllabour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete (Rate for all class of valves.)200 mmRate (4160)-5°. Corporation Charges
166	150 mmRate (3998)-5. Corporation Charges
167	100 mm Rate(2545)+5% corporation charges
168	80 mmRate (1947) +5% Corporation ChargesMJP/SSR/23-24/It. 4a-)/Page no. 148
169	Providing and supplying Kinetic Doub Orifice type Air Valves confirming to IS 14845asper.MJP'sstandardspecifications havingsmall orificeelasticball restingona gunmetalorificenipple, large orificevulcanite ballseatingonmouldedseat ring withbuilt-in Kinetic features, isolating sluice valve mounted inhorizontal position and operated by wheel gearing, inlet face and drilled, including insurance, third party inspection charges, loading, unloading transportation upto departmental stores, excluding GST levied by OI & GOM in all respect etc. complete150 mmb) Kinetic Air Valve Flanged Type - PN-1.6MJP/SSR/ 2023-24 /Section-I (XII) /Pipe Appurtenances/Item No 9-a & d /Page no.151
170	Lowering, laying and fixing in proper alignment andpositionall types of CL. air valves as directed by Engineer-in-charge including cost of conveyance fromstores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves)150 mmc)KineticAirValve(PN-1andPN-1.6)MJP/SSR/ 2023-24 /Section-I (XII) Pipe Appurtenances Item No 10-c Page no.152Rate (883) + 5% Corporation Charges (44.15) = Rs 927.15
171	Welding in all positions with required number of runs, for M.S. pipes internally and or externally including gauging wherever necessary, fixing appurtenances and other accessories in connection with pipe laying work as per specification.MJP SSR 2023-2024 Page No.186 L. No. 7A (v)Rate (1154) + (- 5)% Corporation Charges (57/70) = Rs. 1211.70
172	Gas curting (either square cut or V cut) pipes, plates, etc. of thicknessb) Above 5 mm Up to 10 mmMJP SSR 2023-2024 Page No 187 I No. 12Rate (149, 0) + (- 5)% Corporation Charges (7.45) = R * s deg 156 45
173	Making cross connection to existing distribution main of any type including excavation, breaking & removing existing pipes, lowering laying of specials & pipes in their position refilling closing the water supply in that area, dewatering & restarting the water supply etc complete as directed by Engineer-in-charge for following diameter of existing pipeline, irrespective of diameter of branch line (the number of joints involved will be paid separately depending joints & required pipes, valves supplied free of cost at stores)150 mmRate (4182.00)+5% Corporation Charges (209.10) = Rs. 4391.10
174	200 mmRate (4378.00) -5% Corporation Charges (218.90) = Rs. 4596.90
175	250 mmRate (5200.00)+5% Corporation Charges (260.00) = Rs. 5460.00
176	300 mmRate (6197.00)-5% Corporation Charges (309.85) = Rs. 6506.85 (AUP SSR 2023-2024 Page No. 58 1 No. 10)
177	Hiring charges for machinersRent for JCB (8 to 10 MT)(1 nos crane x 8 Hr x 1 days)MJP/SSR/2023-24/Page No.15Rate (1401.00) +5% Corporation Charges (70.05) = Rs. 1471.05
178	Rent for Crane (5 Tonne)(1 nos crane x 8 Hr x 1 days)MJP/SSR/2023-24/Page No.15Rate (1879.00)+5% Corporation Charges (93.95) = Rs. 1972.95
179	Internal Lining (food grade Epoxy) Providing and applying two part food grade polyamide cured solvent less epoxy lining, meeting BIS 16676on the internal surface of MS Pipe afterblast cleaning to SA 2½ with Anchor Profile of >75 Microns Using angular Steel Grit. The minimum dry film thickness (DFT) of internal lining shall be 400 micron (SSPC PA2). The epoxy coating should offer highest resistance to cathodic disbondment and provide excellent adhesion to steel. The manufacturer shall have the certificate issued in 73.25 Sqm support of portable water service for tests of pH Site application shall not be permitted. The rates are including loading, unloading, handling and transportation of Pipe etc complete.age turbidity, total hardness, chloride nitrate, iron, arseme & fluoride as per IS 10500 2003 and IS 16676 2017.(MUP/SSR/2023-2024 Page No.65 1. No. 22)Rate (417.00)-5 Corporation Charges (20.85) = Rs. 437.85
180	Glyscerine Filled Pressure gauge Bourdon's type as IS 3624:1987MJP Mech. CSR 2023-24/It. No. PM-11/ Pg. No. 10Rate (2010.00) +5% Corporation Charges (100.50) = Rs. 2110.50
181	Disposal of surplus excavated martial up to 2.00 km lead including loading unloading transportation etc. as directed by engineer-inchargePWD_SSR/2022-23 Page No.559 Statement C1Rate (203.32)+5% Corporation Charges (10.17) = Rs. 213.49
182	Battery Operated electromagnetic flow meter Providing, erecting, testingand commissioning of battery operated electro magnetic flow meterbilt in GSM/GPRS (with Sim card charges for36 month validity) of various diameters as per the following specifications including 36 months guarantee etc. complete. 150 mmMJP Mechanical-Electronic-CSR-For-Year-2023-24 WM + Pg. No. 111Rate (156246)+5% Corporation Charges (7$12.3) = Rs. 164058.3
183	Carrying of detailed topographic survey by using total stationa longthe existing or new road including taking L-section and cross sectionat every 30 meter ROM takingat least 10 spot levels per cross section, picking. upall existing details inside the Row hke electric telephone Ine encroachments, structuresete connectingall theprimary total station control points by G.I.S. Benchmarks level or which ever available with department using auto level and preparing Auto CAD plan by using above data taking out 1 set of black and white print out on 50 micron polyster filmsheet A2 size and 2 sets of coloured printout on A2 size submitting soft copy all data on CD. Plain Terrain New AlignmentPWD_SSR/2022-23/Page No.17/SI. No.1.41
184	Hydraulic Isolation Structure (Manifold) 650 mm diameter double drum At. Saravli Village ESR
185	Clearing grass and removal of rubbish up to a distance of 50 meters out side the periphery of the aere.(PWD/SSR/2022-23/Page no.23/I.N.2.07
186	Excavation for foundation / pipe trenches in Earth, soils of all types, sand, gravel and soft murum, Hard murum and boulders, W.B.M. road of strata, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. ( MJP / SSR / 2023-24 / Page No.37 / I. No. 1 ) Rate (165.00) + 5% Corporation Charges (8.25) = Rs. 173.25
187	Excavation for foundation / pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatreing, preparing the bed for foundation and excluding backfilling, etc. complete. ( MJP / SSR / 2023-24 / Page No.37 / I. No. 3 ) Rate (211.00) + 5% Corporation Charges (10.55) = Rs. 221.55
188	Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means. ( MJP / SSR / 2023-24 / Page No.38 / I. No. 7 ) Rate (1119.00) + 5% Corporation Charges (55.95) = Rs. 1174.95
189	Providing dry trap/granite/Quartzite/gneiss, rubble stone soling in 15 cm to 20 cm thick layers including hand packing and compacting etc.complete (Bd-A-12/264) (MJP/SSR/2023-24/section E/ Excavation Item No.18/page no.41)Rate (1316.00) + 5% Corporation Charges (65.80) = Rs. 1381.80
190	Providing and laying in situ Cement Concrete M-15 of trap/granite/Quartzite/geneiss metal for foundation and bedding including bailing out water,form work,compaction,curing etc.complete.(cement 5.90bags/cum)Spec.No BdE/1 page no 287 and B-7,page (MJP/SSR/2023-24/setion G plain, Reinforced and ready mix concrete item
191	Providing and laying in situ Cement Concrete of trap/granite / quartzite / gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement)MJP/SSR/2023-24/ Section G Plain, reinforced and ready mix concrete / Item No.2 Page no.47Rate (8193.00) -5% Corporation Charges (409.65) = Rs. 8602.65
192	Providing and casting in situ C.C. of trap/granite/quartzite gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only Use of L&T. A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement)MJP/SSR/2023-24/ Section G Plain, reinforced and ready mix concrete / Item No.5/ Page no.48Rate (10172.00) + 5% Corporation Charges (508.60) = Rs. 10680.60
193	Providing and fixing in position steel bar reinforcement of various diameter for RCC piles ,caps ,footings,foundations,slabs,beams,columans,canopies,stairecases,newles,chahhas,lintel,pardiescopings,fins,arches etc as per detailed . (Bd-F-17/306)MJP/SSR/2023-24/ Section G Plain, reinforced and ready mix concrete/Item No.3/Page no.50Rate (86091.00) + 5% Corporation Charges (4304.55) = Rs. 90395.55
194	Providing rough cast cement plaster externally, in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15 mm thick in CM. 1:4 and rough cast treatment 12 mm thick in proportion 1:11/2:3 including scaffolding and fourteen days curing complete.PWD SSR 2023-24 Plastering and Pointing Item No. 32.13/ Page No. 212Rate (583.00)-5% Corporation Charges (29.15) = Rs. 612.15
195	Providing and applying white-wash in two coats on old/new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete.PWD/SSR 2023-24/ Colouring/Item No. 36.03/Page No.230Rate (12.00) + 5% Corporation Charges (0.60) = Rs. 12.60
196	Providing and applying colour-wash of approved colour and shade in one coat to new surface including scaffolding, brushing and brooming down (excluding base coats of white wash) etc. complete.PWD SSR 2023-24/ Colouring/Item No. 36.04 Page No.230Rate (10.00) +5% Corporation Charges (0.50) = Rs. 10.50
197	Dewatering the excavated trenches and pools of water in the building trenches pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete. (Bd-A-9/261)Day 2- Pumping hr. is 4 hrs. and Pump Capacity 3 HpMUP SSR 2023-24 Section E Excavation Item No.14 Page no.40Rate (89.00) +5% Corporation Charges (4.45) = Rs. 93.45
198	Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete.Item no 2, 3 & 4 total Excavation in cum 155.49\\" deduction item no 5, 6 & 7Item no total Work As per drawing BBM, Soling, PCC and Raft 17.3685MJP/SSR/2023-24 / Section 5 Section 5/ Excavation ItemRate (92) + 5% Corporation Charges 96.6
199	Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border/messages/symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced MS. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Sp No. As directed by Engineer in Charge PWD SSR 2022-23/Item No. 6.36/Page No. 60Rate (9963.00)-5% Corporation Charges (498.15) = Rs. 10461.15
200	Painting letters upto 20 cm height complete brush coir brushers, dusting, cleaning, including cost of pain etc. complete.PWD/SSR/2023-23/Item No. 6.05 /Page No. 46Rate (29.00) +5% Corporation Charges (1.45) = Rs. 30.45
201	Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores site, and stacking, etc. complete.MJP/SSR/ 2023-2024 Page No.70/L. No.7-dRate (95.00)+5% Corporation Charges (4.75) = Rs. 99.75
202	Providing double flangesluice valve confirming for IS-14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.400 mm
203	200 mm
204	150 mm
205	50 mm (AUP SSR 2023-2024 Page No.159/I. No. 24)
206	Lowering, laying and jointing in position following C.LD/F Reflex valves, Butterfly valves and Sluice valves including cost of allabour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.)400 mmRate (8357) +5% Corporation Charges
207	200 mmRate (4160) +5% Corporation Charge
208	150 mmRate (3998) +5% Corporation Charges
209	80 mmRate (1947) +5% Corporation ChargesMJP/SSR/23-24/It. 4 a) Page no. 148
210	Providing and supplying Kinetic Double Orifice type Air Valves confirming to IS 14845asperMJP'sstandardspecifications havingsmall orificeelasticball restingona gunmetalorificenipple, largeorificevulcanite ballseatingonmouldedseat ring withbuilt-in Kinetic features, isolating sluice valve mounted inhorizontal position and operated by wheel gearing, inlet face and drilled, including insurance, third party inspection charges, loading, unloading, transportation upto departmental stores, excluding GST levied by OI & GOM in all respect etc. complete150 mmb) Kinetic Air Valve Flanged Type - PN-1.6MJP/SSR/ 2023-24 /Section-I(XII) Pipe 118 Appurtenances Item No 9-a & d Page no.151
211	Lowering, laying and fixing in proper alignment andpositionall types of C.I. air valves as directed by Engineer-in-charge including cost of conveyance fromstores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves)150 mmc) Kinetic. Air Valve (PN-1andPN-1.6)MJP SSR 2023-24, Section-I (XII) PipeAppurtenances Item No 10-cPage no. 152Rate (883.00)-5% Corporation Charges (44.15) = Rs.027.15
212	Welding in all positions with required riumber of runs, for M.S. pipes internally and / or externally including gauging wherever necessary, fixing appurtenances and other accessories in connection with pipe laying work as per specification.MJP/SSR/2023-2024/Page No.186/L. No. 7A (v)Rate (1154.00) +5% Corporation Charges (57.70) = Rs. 1211.70
213	Gas cutting (either square cut or V cut) pipes, plates, etc. of thicknessb) Above 5 mm Up to 10 mmMJP/SSR/2023-2024/Page No.187/L. No. 12Rate (149.00)+5% Corporation Charges (7.45) = Rs. 156.45
214	Making cross connection to existing distribution main of any type including excavation, breaking & removing existing pipes, lowering laying of specials & pipes in their position refilling closing the water supply in that area, dewatering & restarting the water supply etc complete as directed by Engineer-in-charge for following diameter of existing pipeline, irrespective of diameter of branch line (the number of joints involved will be paid separately depending upon the nature of joints & required pipes, valves & specials will be supplied free of cost at stores)150 mmRate (4182.00) +5% Corporation Charges (209.10) = Rs. 4391.10
215	200 mmRate (4378.00) + 5% Corporation Charges (218.90) = Rs. 4596.90
216	250 mmRate (5200.00) -5% Corporation Charges (260.00) = Rs. 5460.00
217	300 mmRate (6197.00)-5% Corporation Charges (309.85) = Rs. 6506.85(MJP/SSR/2023-2024 Page No.58 1 No. 10)
218	Hiring charges for machinersRent for JCB (8 to 10 MT)(1 nos crane x 4 Hr x 1 days)MJP/SSR/2023-24 / Page No.15Rate (1401.00) +5% Corporation Charges (70.05) = Rs. 1471.05
219	Rent for Crane (5 Tonne)(1 nos crane x 8 Hr x 1 days)MJP/SSR/2023-24/Page No.15Rate (1879.00) +5% Corporation Charges (93.95) = Rs. 1972.95
220	Internal Lining (food grade Epoxy) Providing and applying two part food grade polyamide cured solvent less epoxy lining, meeting BIS 16676on the internal surface of MS Pipe afterblast cleaning to SA 2½ with Anchor Profile of >75 Microns Using angular Steel Grit. The minimum dry film thickness (DFT) of internal lining shall be 400 micron (SSPC PA2). The epoxy coating should offer highest resistance to cathodic disbondment and provide excellent adhesion to steel The manufacturer shall have the certificate issued in 9 support of portable water service for tests of pH, turbidity, total hardness, chloride nitrate, iron, arsenic & fluoride as per IS 10500: 2003 003 and and IS IS 16676 16676: 2017. 2017. Site application shall not be permitted The rates are including loading, unloading, handling and transportation of Pipe etc complete.(MJP/SSR/2023-2024 / Page No.65 / L. No. 22)Rate (417.00) -5% Corporation Charges (20.85) = Rs. 437.85
221	Glyscerine Filled Pressure gauge Bourdon's type as IS 3624:1987MIP Mech. CSR 2023-24 It. No. PM-11 P No. 10Rate (2010.00)-5% Corporation Charges (100.50) = Rs. 2110.50
222	Disposal of surplus excavated material up to 2.00 km lead including loading unloading transportation etc. as directed by engineer-incharge.PWD_SSR/2022-23/Page No.559/Statement C1Rate (203.32) +5% Corporation Charges (10.17) = Rs. 213.49
223	Battery Operated electromagnetic flow meter Providing, erecting, testingand commissioning of battery operated electro magnetic flow meterbuilt in GSM/GPRS (with Sim card charges for36 month validity) of various diameters as per the following specifications including 36 months guarantee etc. complete. 200 mmMJP/Mechanical-Electronic-CSR-For-Year-2023-24 WM4 Pg. No. 111Rate (185837) -5% Corporation Charg (9291.85) = Rs. 195128.85
224	Carrying of detailed topographic survey by using total stationa longthe existing or new road including taking L-section and cross sectionat every 30 meter ROW takingat least 10 spot levels per cross section, picking upall existing details inside the Row like electric telephone line, encroachments, structuresetc. Pageconnectingall theprimary totalstation control points by G.LS. Benchmarks level or which ever available with department using auto level and preparing Auto CAD plan by using above data taking out 1 set of black and white print out on 50 micron polyster filmsheet A2 size and 2 sets of coloured printout on A2 size submitting soft copy all data on CD. Plain Terrain New AlignmentPWD_SSR/2022-23 Page No.17/SI. No.1.41
225	18 % GST
226	Contigency (2 %) Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Maharashtra Tenders

Construction Tenders

Fabrication and Casting Tenders

Structural Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Hydraulic Isolation Structure (Shaft And Manifold), Palghar-Maharashtra

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction Hydraulic Isolation Structure (Shaft And Manifold), Palghar-Maharashtra

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us